Tom Scogland noticed that `--add-virtual-file` option uses the path
specified as its value as-is, without prepending any value given to
the `--prefix` option like `--add-file` does.
The behaviour has always been that way since the option was
introduced, but the documentation has always been wrong and said
that it would use the value of `--prefix` just like `--add-file`
does.
We could modify the behaviour to make it literally work like the
documentation said, but it would break existing scripts the users
use.
Noticed-by: Tom Scogland <scogland1@llnl.gov>
Acked-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The murmur3 implementation in bloom.c has a bug when converting series
of 4 bytes into network-order integers when char is signed (which is
controllable by a compiler option, and the default signedness of char is
platform-specific). When a string contains characters with the high bit
set, this bug causes results that, although internally consistent within
Git, does not accord with other implementations of murmur3 (thus,
the changed path filters wouldn't be readable by other off-the-shelf
implementatios of murmur3) and even with Git binaries that were compiled
with different signedness of char. This bug affects both how Git writes
changed path filters to disk and how Git interprets changed path filters
on disk.
Therefore, introduce a new version (2) of changed path filters that
corrects this problem. The existing version (1) is still supported and
is still the default, but users should migrate away from it as soon
as possible.
Because this bug only manifests with characters that have the high bit
set, it may be possible that some (or all) commits in a given repo would
have the same changed path filter both before and after this fix is
applied. However, in order to determine whether this is the case, the
changed paths would first have to be computed, at which point it is not
much more expensive to just compute a new changed path filter.
So this patch does not include any mechanism to "salvage" changed path
filters from repositories. There is also no "mixed" mode - for each
invocation of Git, reading and writing changed path filters are done
with the same version number; this version number may be explicitly
stated (typically if the user knows which version they need) or
automatically determined from the version of the existing changed path
filters in the repository.
There is a change in write_commit_graph(). graph_read_bloom_data()
makes it possible for chunk_bloom_data to be non-NULL but
bloom_filter_settings to be NULL, which causes a segfault later on. I
produced such a segfault while developing this patch, but couldn't find
a way to reproduce it neither after this complete patch (or before),
but in any case it seemed like a good thing to include that might help
future patch authors.
The value in t0095 was obtained from another murmur3 implementation
using the following Go source code:
package main
import "fmt"
import "github.com/spaolacci/murmur3"
func main() {
fmt.Printf("%x\n", murmur3.Sum32([]byte("Hello world!")))
fmt.Printf("%x\n", murmur3.Sum32([]byte{0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff}))
}
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent commit will introduce another version of the changed-path
filter in the commit graph file. In order to control which version to
write (and read), a config variable is needed.
Therefore, introduce this config variable. For forwards compatibility,
teach Git to not read commit graphs when the config variable
is set to an unsupported version. Because we teach Git this,
commitgraph.readChangedPaths is now redundant, so deprecate it and
define its behavior in terms of the config variable we introduce.
This commit does not change the behavior of writing (Git writes changed
path filters when explicitly instructed regardless of any config
variable), but a subsequent commit will restrict Git such that it will
only write when commitgraph.changedPathsVersion is a recognized value.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code change to Git to support version 2 will be done in subsequent
commits.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For over a year, setting add.interactive.useBuiltin configuration
variable did nothing but giving a "this does not do anything"
warning. Finally remove it.
* jc/add-i-retire-usebuiltin-config:
add-i: finally retire add.interactive.useBuiltin
Earlier we stopped using the tree of HEAD as the default source of
attributes in a bare repository, but failed to document it. This
has been corrected.
* jc/no-default-attr-tree-in-bare:
attr.tree: HEAD:.gitattributes is no longer the default in a bare repo
The pseudo-merge reachability bitmap to help more efficient storage
of the reachability bitmap in a repository with too many refs has
been added.
* tb/pseudo-merge-reachability-bitmap: (26 commits)
pack-bitmap.c: ensure pseudo-merge offset reads are bounded
Documentation/technical/bitmap-format.txt: add missing position table
t/perf: implement performance tests for pseudo-merge bitmaps
pseudo-merge: implement support for finding existing merges
ewah: `bitmap_equals_ewah()`
pack-bitmap: extra trace2 information
pack-bitmap.c: use pseudo-merges during traversal
t/test-lib-functions.sh: support `--notick` in `test_commit_bulk()`
pack-bitmap: implement test helpers for pseudo-merge
ewah: implement `ewah_bitmap_popcount()`
pseudo-merge: implement support for reading pseudo-merge commits
pack-bitmap.c: read pseudo-merge extension
pseudo-merge: scaffolding for reads
pack-bitmap: extract `read_bitmap()` function
pack-bitmap-write.c: write pseudo-merge table
pseudo-merge: implement support for selecting pseudo-merge commits
config: introduce `git_config_double()`
pack-bitmap: make `bitmap_writer_push_bitmapped_commit()` public
pack-bitmap: implement `bitmap_writer_has_bitmapped_object_id()`
pack-bitmap-write: support storing pseudo-merge commits
...
The "--heads" option of "ls-remote" and "show-ref" has been been
deprecated; "--branches" replaces "--heads".
* jc/heads-are-branches:
show-ref: introduce --branches and deprecate --heads
ls-remote: introduce --branches and deprecate --heads
refs: call branches branches
The structure of the document that records longer-term project
decisions to deprecate/remove/update various behaviour has been
outlined.
* ps/document-breaking-changes:
BreakingChanges: document that we do not plan to deprecate git-checkout
BreakingChanges: document removal of grafting
BreakingChanges: document upcoming change from "sha1" to "sha256"
docs: introduce document to announce breaking changes
When the user adds to "git rebase -i" instruction to "pick" a merge
commit, the error experience is not pleasant. Such an error is now
caught earlier in the process that parses the todo list.
* pw/rebase-i-error-message:
rebase -i: improve error message when picking merge
rebase -i: pass struct replay_opts to parse_insn_line()
"git update-ref --stdin" learned to handle transactional updates of
symbolic-refs.
* kn/update-ref-symref:
update-ref: add support for 'symref-update' command
reftable: pick either 'oid' or 'target' for new updates
update-ref: add support for 'symref-create' command
update-ref: add support for 'symref-delete' command
update-ref: add support for 'symref-verify' command
refs: specify error for regular refs with `old_target`
refs: create and use `ref_update_expects_existing_old_ref()`
"git diff --exit-code --ext-diff" learned to take the exit status
of the external diff driver into account when deciding the exit
status of the overall "git diff" invocation when configured to do
so.
* rs/diff-exit-code-with-external-diff:
diff: let external diffs report that changes are uninteresting
userdiff: add and use struct external_diff
t4020: test exit code with external diffs
"git am" has a safety feature to prevent it from starting a new
session when there already is a session going. It reliably
triggers when a mbox is given on the command line, but it has to
rely on the tty-ness of the standard input. Add an explicit way to
opt out of this safety with a command line option.
* jk/am-retry:
test-terminal: drop stdin handling
am: add explicit "--retry" option
A new command has been added to migrate a repository that uses the
files backend for its ref storage to use the reftable backend, with
limitations.
* ps/ref-storage-migration:
builtin/refs: new command to migrate ref storage formats
refs: implement logic to migrate between ref storage formats
refs: implement removal of ref storages
worktree: don't store main worktree twice
reftable: inline `merged_table_release()`
refs/files: fix NULL pointer deref when releasing ref store
refs/files: extract function to iterate through root refs
refs/files: refactor `add_pseudoref_and_head_entries()`
refs: allow to skip creation of reflog entries
refs: pass storage format to `ref_store_init()` explicitly
refs: convert ref storage format to an enum
setup: unset ref storage when reinitializing repository version
"make check-docs" noticed problems and reported to its output but
failed to signal its findings with its exit status, which has been
corrected.
* ps/check-docs-fix:
ci/test-documentation: work around SyntaxWarning in Python 3.12
gitlab-ci: add job to run `make check-docs`
Documentation/lint-manpages: bubble up errors
Makefile: extract script to lint missing/extraneous manpages
While investigating a benign Coverity warning on the new pseudo-merge
implementation, I was struggling to understand the (paraphrased) below:
ofs = index_end - 24 - (index->pseudo_merges.nr * sizeof(uint64_t));
for (i = 0; i < index->pseudo_merges.nr; i++) {
index->pseudo_merges.v[i].at = get_be64(ofs);
ofs += sizeof(uint64_t);
}
, in pack-bitmap.c::load_bitmap_header(). Looking at the documentation,
the diagram describing the on-disk format (prior to this patch)
suggested that the optional extended lookup table immediately preceded
the trailing metadata portion.
If that were the case, that would make the above code from
load_bitmap_header() incorrect, as we'd be blindly reading into the
extended offset table.
But later on in the documentation there is a description of the
pseudo-merge position table as immediately preceding the trailing
metadata portion of the extension. And indeed, we do write the position
table in pack-bitmap-write.c:
/* write positions for all pseudo merges */
for (i = 0; i < writer->pseudo_merges_nr; i++)
hashwrite_be64(f, pseudo_merge_ofs[i]);
hashwrite_be32(f, writer->pseudo_merges_nr);
hashwrite_be32(f, kh_size(writer->pseudo_merge_commits));
hashwrite_be64(f, table_start - start);
hashwrite_be64(f, hashfile_total(f) - start + sizeof(uint64_t));
So this is purely a case of the diagram being out of sync with the
textual description and actual implementation of the format
specification.
Add the missing component back to the format diagram to avoid further
confusion in this area.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because remote.*.url is treated as a multi-valued key, there is no way
to override previous config. So for example if you have
remote.origin.url set to some wrong value, doing:
git -c remote.origin.url=right fetch
would not work. It would append "right" to the list, which means we'd
still fetch from "wrong" (since subsequent values are used only as push
urls).
Let's provide a mechanism to reset the list, like we do for other
multi-valued keys (e.g., credential.helper, http.extraheaders, and
merge.suppressDest all use this "empty string means reset" pattern).
Reported-by: Mathew George <mathewegeorge@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for these keys gives a very terse definition and
points you to the fetch/push manpages. But from reading those pages it
was not at all obvious to me that:
- these are keys that can be defined multiple times with meaningful
behavior (especially remote.*.url)
- the way that pushurl overrides url (the git-push page does mention
that "pushurl defaults to url", but it is not immediately clear what
a multi-valued url would do in that situation).
Let's try to summarize the current behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-checkout(1) command is seen by many as hard to understand
because it connects two somewhat unrelated features: switching between
branches and restoring worktree files from arbitrary revisions. In 2019,
we thus implemented two new commands git-switch(1) and git-restore(1) to
split out these separate concerns into standalone functions.
This "replacement" of git-checkout(1) has repeatedly triggered concerns
for our userbase that git-checkout(1) will eventually go away. This is
not the case though: the use of that command is still widespread, and it
is not expected that this will change anytime soon.
Document that all three commands will remain for the foreseeable future.
This decision may be revisited in case we ever figure out that most
everyone has given up on any of the commands.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grafting mechanism for objects has been deprecated in e650d0643b
(docs: mark info/grafts as outdated, 2014-03-05), which is more than a
decade ago. The mechanism can lead to hard-to-debug issues and has a
superior replacement with replace refs.
Follow through with the deprecation and mark grafts for removal in Git
3.0.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with 8e42eb0e9a (doc: sha256 is no longer experimental,
2023-07-31), the "sha256" object format is no longer considered to be
experimental. Furthermore, the SHA-1 hash function is actively
recommended against by for example NIST and FIPS 140-2, and attacks
against it are becoming more practical both due to new weaknesses
(SHAppening, SHAttered, Shambles) and due to the ever-increasing
computing power. It is only a matter of time before it can be considered
to be broken completely.
Let's plan for this event by being active instead of waiting for it to
happend and announce that the default object format is going to change
from "sha1" to "sha256" with Git 3.0.
All major Git implementations (libgit2, JGit, go-git) support the
"sha256" object format and are thus prepared for this change. The most
important missing piece in the puzzle is support in forges. But while
GitLab recently gained experimental support for the "sha256" object
format though, to the best of my knowledge GitHub doesn't support it
yet. Ideally, announcing this upcoming change will encourage forges to
start building that support.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over time, Git has grown quite a lot. With this evolution, many ideas
that were sensible at the time they were introduced are not anymore and
are thus considered to be deprecated. And while some deprecations may be
noted in manpages, most of them are actually deprecated in the "hive
mind" of the Git community, only.
Introduce a new document that tracks such breaking changes, but also
deprecations which we are not willing to go through with, to address
this issue. This document serves multiple purposes:
- It is a way to facilitate discussion around proposed deprecations.
- It allows users to learn about deprecations and speak up in case
they have good reasons why a certain feature should not be
deprecated.
- It states intent and documents where the Git project wants to go,
both in the case where we want to deprecate, but also in the case
where we don't want to deprecate a specific feature.
The document is _not_ intended to cast every single discussion into
stone. It is supposed to be a living document that may change over time
when there are good reasons for it to change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The safe.directory configuration knob has been updated to
optionally allow leading path matches.
* jc/safe-directory-leading-path:
safe.directory: allow "lead/ing/path/*" match
The alias-expanded command lines are logged to the trace output.
* iw/trace-argv-on-alias:
run-command: show prepared command
Documentation: alias: add notes on shell expansion
Documentation: alias: rework notes into points
The options --exit-code and --quiet instruct git diff to indicate
whether it found any significant changes by exiting with code 1 if it
did and 0 if there were none. Currently this doesn't work if external
diff programs are involved, as we have no way to learn what they found.
Add that ability in the form of the new configuration options
diff.trustExitCode and diff.<driver>.trustExitCode and the environment
variable GIT_EXTERNAL_DIFF_TRUST_EXIT_CODE. They pair with the config
options diff.external and diff.<driver>.command and the environment
variable GIT_EXTERNAL_DIFF, respectively.
The new options are off by default, keeping the old behavior. Enabling
them indicates that the external diff returns exit code 1 if it finds
significant changes and 0 if it doesn't, like diff(1).
The name of the new options is taken from the git difftool and mergetool
options of similar purpose. (There they enable passing on the exit code
of a diff tool and to infer whether a merge done by a merge tool is
successful.)
The new feature sets the diff flag diff_from_contents in
diff_setup_done() if we need the exit code and are allowed to call
external diffs. This disables the optimization that avoids calling the
program with --quiet. Add it back by skipping the call if the external
diff is not able to report empty diffs. We can only do that check after
evaluating the file-specific attributes in run_external_diff().
If we do run the external diff with --quiet, send its output to
/dev/null.
I considered checking the output of the external diff to check whether
its empty. It was added as 11be65cfa4 (diff: fix --exit-code with
external diff, 2024-05-05) and quickly reverted, as it does not work
with external diffs that do not write to stdout. There's no reason why
a graphical diff tool would even need to write anything there at all.
I also considered using a non-zero exit code for empty diffs, which
could be done without adding new configuration options. We'd need to
disable the optimization that allows git diff --quiet to skip calling
external diffs, though -- that might be quite surprising if graphical
diff programs are involved. And assigning the opposite meaning of the
exit codes compared to diff(1) and git diff --exit-code to the external
diff can cause unnecessary confusion.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to check the exit code of git diff with its options --quiet
and --exit-code when using an external diff program. Currently we
cannot tell whether it found significant changes or not.
While at it, document briefly that --quiet turns off execution of
external diff programs because that behavior surprised me for a moment
while writing the tests.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that the interactive.singleKey configuration option is
disabled by default, using rather subtle wording that avoids an
emphasis on the actual default value. This should eliminate any
associated doubts.
While there, touch up the remaining wording of the description a bit.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'symref-update' command to the '--stdin' mode of 'git-update-ref' to
allow updates of symbolic refs. The 'symref-update' command takes in a
<new-target>, which the <ref> will be updated to. If the <ref> doesn't
exist it will be created.
It also optionally takes either an `ref <old-target>` or `oid
<old-oid>`. If the <old-target> is provided, it checks to see if the
<ref> targets the <old-target> before the update. If <old-oid> is provided
it checks <ref> to ensure that it is a regular ref and <old-oid> is the
OID before the update. This by extension also means that this when a
zero <old-oid> is provided, it ensures that the ref didn't exist before.
The divergence in syntax from the regular `update` command is because if
we don't use a `(ref | oid)` prefix for the old_value, then there is
ambiguity around if the value provided should be treated as an oid or a
reference. This is more so the reason, because we allow anything
committish to be provided as an oid. While 'symref-verify' and
'symref-delete' also take in `<old-target>` we do not have this
divergence there as those commands only work with symrefs. Whereas
'symref-update' also works with regular refs and allows users to convert
regular refs to symrefs.
The command allows users to perform symbolic ref updates within a
transaction. This provides atomicity and allows users to perform a set
of operations together.
This command supports deref mode, to ensure that we can update
dereferenced regular refs to symrefs.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'symref-create' command to the '--stdin' mode 'git-update-ref' to
allow creation of symbolic refs in a transaction. The 'symref-create'
command takes in a <new-target>, which the created <ref> will point to.
Also, support the 'core.prefersymlinkrefs' config, wherein if the config
is set and the filesystem supports symlinks, we create the symbolic ref
as a symlink. We fallback to creating a regular symref if creating the
symlink is unsuccessful.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new command 'symref-delete' to allow deletions of symbolic refs in
a transaction via the '--stdin' mode of the 'git-update-ref' command.
The 'symref-delete' command can, when given an <old-target>, delete the
provided <ref> only when it points to <old-target>.
This command is only compatible with the 'no-deref' mode because we
optionally want to check the 'old_target' of the ref being deleted.
De-referencing a symbolic ref would provide a regular ref and we already
have the 'delete' command for regular refs.
While users can also use 'git symbolic-ref -d' to delete symbolic refs,
the 'symref-delete' command in 'git-update-ref' allows users to do so
within a transaction, which promises atomicity of the operation and can
be batched with other commands.
When no 'old_target' is provided it can also delete regular refs,
similar to how the 'delete' command can delete symrefs when no 'old_oid'
is provided.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'symref-verify' command allows users to verify if a provided <ref>
contains the provided <old-target> without changing the <ref>. If
<old-target> is not provided, the command will verify that the <ref>
doesn't exist.
The command allows users to verify symbolic refs within a transaction,
and this means users can perform a set of changes in a transaction only
when the verification holds good.
Since we're checking for symbolic refs, this command will only work with
the 'no-deref' mode. This is because any dereferenced symbolic ref will
point to an object and not a ref and the regular 'verify' command can be
used in such situations.
Add required tests for symref support in 'verify'. Since we're here,
also add reflog checks for the pre-existing 'verify' tests, there is no
divergence from behavior, but we never tested to ensure that reflog
wasn't affected by the 'verify' command.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The promisor.quiet configuration knob can be set to true to make
lazy fetching from promisor remotes silent.
* th/quiet-lazy-fetch-from-promisor:
promisor-remote: add promisor.quiet configuration option
After a patch fails, you can ask "git am" to try applying it again with
new options by running without any of the resume options. E.g.:
git am <patch
# oops, it failed; let's try again
git am --3way
But since this second command has no explicit resume option (like
"--continue"), it looks just like an invocation to read a fresh patch
from stdin. To avoid confusing the two cases, there are some heuristics,
courtesy of 8d18550318 (builtin-am: reject patches when there's a
session in progress, 2015-08-04):
if (in_progress) {
/*
* Catch user error to feed us patches when there is a session
* in progress:
*
* 1. mbox path(s) are provided on the command-line.
* 2. stdin is not a tty: the user is trying to feed us a patch
* from standard input. This is somewhat unreliable -- stdin
* could be /dev/null for example and the caller did not
* intend to feed us a patch but wanted to continue
* unattended.
*/
if (argc || (resume_mode == RESUME_FALSE && !isatty(0)))
die(_("previous rebase directory %s still exists but mbox given."),
state.dir);
if (resume_mode == RESUME_FALSE)
resume_mode = RESUME_APPLY;
[...]
So if no resume command is given, then we require that stdin be a tty,
and otherwise complain about (potentially) receiving an mbox on stdin.
But of course you might not actually have a terminal available! And
sadly there is no explicit way to hit this same code path; this is the
only place that sets RESUME_APPLY. So you're stuck, and scripts like our
test suite have to bend over backwards to create a pseudo-tty.
Let's provide an explicit option to trigger this mode. The code turns
out to be quite simple; just setting "resume_mode" to RESUME_FALSE is
enough to dodge the tty check, and then our state is the same as it
would be with the heuristic case (which we'll continue to allow).
When we don't have a session in progress, there's already code to
complain when resume_mode is set (but we'll add a new test to cover
that).
To test the new option, we'll convert the existing tests that rely on
the fake stdin tty. That lets us test them on more platforms, and will
let us simplify test_terminal a bit in a future patch.
It does, however, mean we're not testing the tty heuristic at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new command that allows the user to migrate a repository
between ref storage formats. This new command is implemented as part of
a new git-refs(1) executable. This is due to two reasons:
- There is no good place to put the migration logic in existing
commands. git-maintenance(1) felt unwieldy, and git-pack-refs(1) is
not the correct place to put it, either.
- I had it in my mind to create a new low-level command for accessing
refs for quite a while already. git-refs(1) is that command and can
over time grow more functionality relating to refs. This should help
discoverability by consolidating low-level access to refs into a
single executable.
As mentioned in the preceding commit that introduces the ref storage
format migration logic, the new `git refs migrate` command still has a
bunch of restrictions. These restrictions are documented accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "lint-manpages.sh" script does not return an error in case any of
its checks fail. While this is faithful to the implementation that we
had as part of the "check-docs" target before the preceding commit, it
makes it hard to spot any violations of the rules via the corresponding
CI job, which will of course exit successfully, too.
Adapt the script to bubble up errors.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "check-docs" target of our top-level Makefile fulfills two different
roles. For one it runs the "lint-docs" target of the "Documentation/"
Makefile. And second it performs some checks of whether there are any
manpages that are missing or extraneous via some inline scripts.
The second set of checks feels quite misplaced in the top-level Makefile
as it would fit in much better with our "lint-docs" target. Back when
the checks were introduced in 8c989ec528 (Makefile: $(MAKE) check-docs,
2006-04-13), that target did not yet exist though.
Furthermore, the script makes use of several Makefile variables which
are defined in the top-level Makefile, which makes it hard to access
their contents from elsewhere. There is a trick though that we already
use in "check-builtins.sh" to gain access: we can create an ad-hoc
Makefile that has an extra target to print those variables.
Pull out the script into a separate "lint-manpages.sh" script by using
that trick. Wire up that script via the "lint-docs" target. For one,
normal shell scripts are way easier to reason about than those which are
embedded in a Makefile. Second, it allows one to easily execute the
script standalone without any of the other checks.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration variable stopped doing anything (other than
announcing itself as a variable that does not do anything useful,
when it is used) in Git 2.40.
At this point, it is not even worth giving the warning, which was
meant to be a way to help users notice they are carrying unused
cruft in their configuration files and give them a chance to
clean-up.
Let's remove the warning and documentation for it, and truly stop
paying attention to it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Documentation/config/add.txt | 6 ------
builtin/add.c | 6 +-----
t/t3701-add-interactive.sh | 15 ---------------
3 files changed, 1 insertion(+), 26 deletions(-)
51441e64 (stop using HEAD for attributes in bare repository by
default, 2024-05-03) has addressed a recent performance regression
by partially reverting a topic that was merged at 26dd307c (Merge
branch 'jc/attr-tree-config', 2023-10-30). But it forgot to update
the documentation to remove the mention of a special case in bare
repositories.
Let's update the document before the update hits the next release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call the tips of branches "heads", but this command calls the
option to show only branches "--heads", which confuses the branches
themselves and the tips of branches.
Straighten the terminology by introducing "--branches" option that
limits the output to branches, and deprecate "--heads" option used
that way.
We do not plan to remove "--heads" or "-h" yet; we may want to do so
at Git 3.0, in which case, we may need to start advertising upcoming
removal with an extra warning when they are used.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call the tips of branches "heads", but this command calls the
option to show only branches "--heads", which confuses the branches
themselves and the tips of branches.
Straighten the terminology by introducing "--branches" option that
limits the output to branches, and deprecate "--heads" option used
that way.
We do not plan to remove "--heads" or "-h" yet; we may want to do so
at Git 3.0, in which case, we may need to start advertising upcoming
removal with an extra warning when they are used.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing inline shell for shell-expansion aliases (i.e. prefixed
with "!"), there are some caveats around argument parsing to be aware
of. This series of notes attempts to explain what is happening more
clearly.
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SubmittingPatches document now refers folks to manpages
translation project.
* jc/doc-manpages-l10n:
SubmittingPatches: advertise git-manpages-l10n project a bit
Adjust jc/fix-2.45.1-and-friends-for-2.39 for more recent
maintenance track.
* jc/fix-2.45.1-and-friends-for-maint:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
The knobs to tweak how reftable files are written have been made
available as configuration variables.
* ps/reftable-write-options:
refs/reftable: allow configuring geometric factor
reftable: make the compaction factor configurable
refs/reftable: allow disabling writing the object index
refs/reftable: allow configuring restart interval
reftable: use `uint16_t` to track restart interval
refs/reftable: allow configuring block size
reftable/dump: support dumping a table's block structure
reftable/writer: improve error when passed an invalid block size
reftable/writer: drop static variable used to initialize strbuf
reftable: pass opts as constant pointer
reftable: consistently refer to `reftable_write_options` as `opts`
The only todo commands that accept a merge commit are "merge" and
"reset". All the other commands like "pick" or "reword" fail when they
try to pick a a merge commit and print the message
error: commit abc123 is a merge but no -m option was given.
followed by a hint about the command being rescheduled. This message is
designed to help the user when they cherry-pick a merge and forget to
pass "-m". For users who are rebasing the message is confusing as there
is no way for rebase to cherry-pick the merge.
Improve the user experience by detecting the error and printing some
advice on how to fix it when the todo list is parsed rather than waiting
for the "pick" command to fail. The advice recommends "merge" rather
than "exec git cherry-pick -m ..." on the assumption that cherry-picking
merges is relatively rare and it is more likely that the user chose
"pick" by a mistake.
It would be possible to support cherry-picking merges by allowing the
user to pass "-m" to "pick" commands but that adds complexity to do
something that can already be achieved with
exec git cherry-pick -m1 abc123
Reported-by: Stefan Haller <lists@haller-berlin.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When safe.directory was introduced in v2.30.3 timeframe, 8959555c
(setup_git_directory(): add an owner check for the top-level
directory, 2022-03-02), it only allowed specific opt-out
directories. Immediately after an embargoed release that included
the change, 0f85c4a3 (setup: opt-out of check with safe.directory=*,
2022-04-13) was done as a response to loosen the check so that a
single '*' can be used to say "I trust all repositories" for folks
who host too many repositories to list individually.
Let's further loosen the check to allow people to say "everything
under this hierarchy is deemed safe" by specifying such a leading
directory with "/*" appended to it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default "creation-factor" used by "git format-patch" has been
raised to make it more aggressively find matching commits.
* jc/format-patch-more-aggressive-range-diff:
format-patch: run range-diff with larger creation-factor
The documentation for "git diff --name-only" has been clarified
that it is about showing the names in the post-image tree.
* jc/doc-diff-name-only:
diff: document what --name-only shows
Terminology to call various ref-like things are getting
straightened out.
* ps/pseudo-ref-terminology:
refs: refuse to write pseudorefs
ref-filter: properly distinuish pseudo and root refs
refs: pseudorefs are no refs
refs: classify HEAD as a root ref
refs: do not check ref existence in `is_root_ref()`
refs: rename `is_special_ref()` to `is_pseudo_ref()`
refs: rename `is_pseudoref()` to `is_root_ref()`
Documentation/glossary: define root refs as refs
Documentation/glossary: clarify limitations of pseudorefs
Documentation/glossary: redefine pseudorefs as special refs
The SubmittingPatches document now refers folks to manpages
translation project.
* jc/doc-manpages-l10n:
SubmittingPatches: advertise git-manpages-l10n project a bit
There are a number of caveats when using aliases. Rather than
stuffing them all together in a paragraph, let's separate them out
into individual points to make it clearer what's going on.
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration option to allow output from the promisor
fetching objects to be suppressed.
This allows us to stop commands like 'git blame' being swamped
with progress messages and gc notifications from the promisor
when used in a partial clone.
Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fixes/2.45.1/2.44:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
* fixes/2.45.1/2.43:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
* fixes/2.45.1/2.42:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
* fixes/2.45.1/2.41:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
* fixes/2.45.1/2.40:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
Revert overly aggressive "layered defence" that went into 2.45.1
and friends, which broke "git-lfs", "git-annex", and other use
cases, so that we can rebuild necessary counterparts in the open.
* jc/fix-2.45.1-and-friends-for-2.39:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
Teach the new pseudo-merge machinery how to select non-bitmapped commits
for inclusion in different pseudo-merge group(s) based on a handful of
criteria.
Note that the selected pseudo-merge commits aren't actually used or
written anywhere yet. This will be done in the following commit.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare to implement pseudo-merge bitmaps over the next several commits
by first describing the serialization format which will store the new
pseudo-merge bitmaps themselves.
This format is implemented as an optional extension within the bitmap v1
format, making it compatible with previous versions of Git, as well as
the original .bitmap implementation within JGit.
The format is described in detail in the patch contents below, but the
high-level description is as follows:
- An array of pseudo-merge bitmaps, each containing a pair of EWAH
bitmaps: one describing the set of pseudo-merge "parents", and
another describing the set of object(s) reachable from those
parents.
- A lookup table to determine which pseudo-merge(s) a given commit
appears in. An optional extended lookup table follows when there is
at least one commit which appears in multiple pseudo-merge groups.
- Trailing metadata, including the number of pseudo-merge(s), number
of unique parents, the offset within the .bitmap file for the
pseudo-merge commit lookup table, and the size of the optional
extension itself.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some details to the gitpacking(7) manual page which motivate and
describe pseudo-merge bitmaps.
The exact on-disk format and many of the configuration knobs will be
described in subsequent commits.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new manual page, gitpacking(7) to collect useful information
about advanced packing concepts in Git.
In future commits in this series, this manual page will expand to
describe the new pseudo-merge bitmaps feature, as well as include
examples, relevant configuration bits, use-cases, and so on.
Outside of this series, this manual page may absorb similar pieces from
other parts of Git's documentation about packing.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kn/ref-transaction-symref:
refs: remove `create_symref` and associated dead code
refs: rename `refs_create_symref()` to `refs_update_symref()`
refs: use transaction in `refs_create_symref()`
refs: add support for transactional symref updates
refs: move `original_update_refname` to 'refs.c'
refs: support symrefs in 'reference-transaction' hook
files-backend: extract out `create_symref_lock()`
refs: accept symref values in `ref_transaction_update()`
* ps/pseudo-ref-terminology:
refs: refuse to write pseudorefs
ref-filter: properly distinuish pseudo and root refs
refs: pseudorefs are no refs
refs: classify HEAD as a root ref
refs: do not check ref existence in `is_root_ref()`
refs: rename `is_special_ref()` to `is_pseudo_ref()`
refs: rename `is_pseudoref()` to `is_root_ref()`
Documentation/glossary: define root refs as refs
Documentation/glossary: clarify limitations of pseudorefs
Documentation/glossary: redefine pseudorefs as special refs
This reverts commit a33fea08 (fsck: warn about symlink pointing
inside a gitdir, 2024-04-10), which warns against symbolic links
commonly created by git-annex.
Updates to symbolic refs can now be made as a part of ref
transaction.
* kn/ref-transaction-symref:
refs: remove `create_symref` and associated dead code
refs: rename `refs_create_symref()` to `refs_update_symref()`
refs: use transaction in `refs_create_symref()`
refs: add support for transactional symref updates
refs: move `original_update_refname` to 'refs.c'
refs: support symrefs in 'reference-transaction' hook
files-backend: extract out `create_symref_lock()`
refs: accept symref values in `ref_transaction_update()`
The Git project currently operates according to an informal
consensus-building process, which is currently described in the
SubmittingPatches document. However, that focuses on small/medium-scale
patch series. For larger-scale decisions, the process is not as well
described. Document what to expect so that we have something concrete to
help inform newcomers to the project.
This document explicitly does not aim to impose a formal process to
decision-making, nor to change pre-existing norms. Its only aim is to
describe how the project currently operates today.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--name-only" option is about showing the name of each file in
the post-image tree that got changed and nothing else (like "was it
created?"). Unlike the "--name-status" option that tells how the
change happened (e.g., renamed with similarity), it does not give
anything else, like the name of the corresponding file in the old
tree.
For example, if you start from a clean checkout that has a file
whose name is COPYING, here is what you would see:
$ git mv COPYING RENAMING
$ git diff -M --name-only HEAD
RENAMING
$ git diff -M --name-status HEAD
R100 COPYING RENAMING
Lack of the description of this fact has confused readers in the
past. Even back when dda2d79a ([PATCH] Clean up diff option
descriptions., 2005-07-13) documented "--name-only", "git diff"
already supported the renames, so in a sense, from day one, this
should have been documented more clearly but it wasn't.
Belatedly clarify it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The project takes our AsciiDoc sources of documentation and actively
maintains the translations to various languages.
Let's give them enhanced visibility to help those who want to
volunteer find them.
Acked-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a section to explain how to work around other in-flight patches and
how to navigate conflicts which arise as a series is being iterated.
This provides the necessary steps that users can follow to reduce
friction with other ongoing topics and also provides guidelines on how
the users can also communicate this to the list efficiently.
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano