Not even in C locale, it is wrong to expect that the exact phrasing
"File exists" is used to show EEXIST.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --autosquash option is implied by the earlier --[no-]autosquash
entry in the list.
Signed-off-by: Emilio Cobos Álvarez <emilio@crisal.io>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rb/no-dev-zero-in-test:
t5562: replace /dev/zero with a pipe from generate_zero_bytes
t5318: replace use of /dev/zero with generate_zero_bytes
test-lib-functions.sh: add generate_zero_bytes function
The code and tests assume that the system supplied iconv() would
always use BOM in its output when asked to encode to UTF-16 (or
UTF-32), but apparently some implementations output big-endian
without BOM. A compile-time knob has been added to help such
systems (e.g. NonStop) to add BOM to the output to increase
portability.
* bc/utf16-portability-fix:
utf8: handle systems that don't write BOM for UTF-16
Fix a recently introduced regression in c762aada1a ("rebase -x: sanity
check command", 2019-01-29) triggered when running the tests with
GIT_TEST_REBASE_USE_BUILTIN=false. See 62c23938fa ("tests: add a
special setup where rebase.useBuiltin is off", 2018-11-14) for how
that test mode works.
As discussed on-list[1] it's not worth it to implement the sanity
check in the legacy rebase code, we plan to remove it after the 2.21
release. So let's do the bare minimum to make the tests pass under the
GIT_TEST_REBASE_USE_BUILTIN=false special setup.
1. https://public-inbox.org/git/xmqqva1nbeno.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `git version --build-options`, we report also the CPU, but in Git for
Windows we actually cross-compile the 32-bit version in a 64-bit Git for
Windows, so we cannot rely on the auto-detected value.
In 3815f64b0d (mingw: fix CPU reporting in `git version
--build-options`, 2019-02-07), we fixed this by a Windows-only
workaround, making use of magic pre-processor constants, which works in
GCC, but most likely not all C compilers.
As pointed out by Eric Sunshine, there is a better way, anyway: to set
the Makefile variable HOST_CPU explicitly for cross-compiled Git. So
let's do that!
This reverts commit 3815f64b0d partially.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid a bug in dash that's been fixed ever since its
ec2c84d ("[PARSER] Fix clobbering of checkkwd", 2011-03-15)[1] first
released with dash v0.5.7 in July 2011. This failing test was
introduced in 5f9674243d ("config: add --expiry-date", 2017-11-18).
This fixes 1/2 tests failing on Debian Lenny & Squeeze. The other
failure is due to 1b42f45255 ("git-svn: apply "svn.pathnameencoding"
before URL encoding", 2016-02-09).
The dash bug is triggered by this test because the heredoc contains a
command embedded in "$()" with a "{}" block coming right after
it. Refactoring the "$()" to e.g. be a variable that was set earlier
will also work around it, but let's instead break up the "EOF" and the
"{}".
An earlier version of this patch[2] mitigated the issue by breaking
the "$()" out of the "{}" block, that worked, but just because it
broke up the "EOF" and "{}" block. Putting e.g. "echo &&" between the
two would also work.
1. https://git.kernel.org/pub/scm/utils/dash/dash.git/
2. https://public-inbox.org/git/20181127164253.9832-1-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default bash is now officially in /usr/coreutils/bin instead
of in /usr/local/bin. This version of bash is more stable and
recommended for all use as of the J06.22 and L18.02 operating
system revision levels. This new version provides more stability
of test results.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 7db118303a (unpack_trees: fix breakage when o->src_index !=
o->dst_index - 2018-04-23) and changes in merge code to use separate
index_state for source and destination, when doing a merge with split
index activated, we may run into this line in unpack_trees():
o->result.split_index = init_split_index(&o->result);
This is by itself not wrong. But this split index information is not
fully populated (and it's only so when move_cache_to_base_index() is
called, aka force splitting the index, or loading index_state from a
file). Both "base_oid" and "base" in this case remain null.
So when writing the main index down, we link to this index with null
oid (default value after init_split_index()), which also means "no split
index" internally. This triggers an incorrect base index refresh:
warning: could not freshen shared index '.../sharedindex.0{40}'
This patch makes sure we will not refresh null base_oid (because the
file is never there). It also makes sure not to write "link" extension
with null base_oid in the first place (no point having it at
all). Read code already has protection against null base_oid.
There is also another side fix in remove_split_index() that causes a
crash when doing "git update-index --no-split-index" when base_oid in
the index file is null. In this case we will not load
istate->split_index->base but we dereference it anyway and are rewarded
with a segfault. This should not happen anymore, but it's still wrong to
dereference a potential NULL pointer, especially when we do check for
NULL pointer in the next code.
Reported-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To help platforms that lack /dev/zero (e.g. NonStop), replace use
of /dev/zero to feed "git http-backend" with a pipe of output from
the generate_zero_bytes helper.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are platforms (e.g. NonStop) that lack /dev/zero; use the
generate_zero_bytes helper we just introduced to append stream
of NULs at the end of the file.
The original, even though it uses "dd seek=... count=..." to make it
look like it is overwriting the middle part of an existing file, has
truncated the file before this step with another use of "dd", which
may make it tricky to see why this rewrite is a correct one.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_oid_with_context() function is declared to return an enum in
cache.h, but defined to return an int in sha1-name.c. The compiler
notices this on AIX and rejects the build, since d1dd94b308 (Do not
print 'dangling' for cat-file in case of ambiguity - 2019-01-17) was
merged.
Return the correct type from the implementation to fix this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On various BSD's, fileno(fp) is implemented as a macro that directly
accesses the fields in the FILE * object, which breaks a function that
accepts a "void *fp" parameter and calls fileno(fp) and expect it to
work.
Work it around by adding a compile-time knob FILENO_IS_A_MACRO that
inserts a real helper function in the middle of the callchain.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5318 and t5562 used /dev/zero, which is not portable. This function
provides both a fixed block of NUL bytes and an infinite stream of NULs.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are just some small fixes I noticed doing a complete read-through
(there are a few cases I left that are incomplete or abbreviated
sentences, but I think those are OK in this sort of bullet-list style).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the feature that was eventually committed, "--date=auto" doesn't do
anything. It was generalized to "--date=auto:<format>".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When serializing UTF-16 (and UTF-32), there are three possible ways to
write the stream. One can write the data with a BOM in either big-endian
or little-endian format, or one can write the data without a BOM in
big-endian format.
Most systems' iconv implementations choose to write it with a BOM in
some endianness, since this is the most foolproof, and it is resistant
to misinterpretation on Windows, where UTF-16 and the little-endian
serialization are very common. For compatibility with Windows and to
avoid accidental misuse there, Git always wants to write UTF-16 with a
BOM, and will refuse to read UTF-16 without it.
However, musl's iconv implementation writes UTF-16 without a BOM,
relying on the user to interpret it as big-endian. This causes t0028 and
the related functionality to fail, since Git won't read the file without
a BOM.
Add a Makefile and #define knob, ICONV_OMITS_BOM, that can be set if the
iconv implementation has this behavior. When set, Git will write a BOM
manually for UTF-16 and UTF-32 and then force the data to be written in
UTF-16BE or UTF-32BE. We choose big-endian behavior here because the
tests use the raw "UTF-16" encoding, which will be big-endian when the
implementation requires this knob to be set.
Update the tests to detect this case and write test data with an added
BOM if necessary. Always write the BOM in the tests in big-endian
format, since all iconv implementations that omit a BOM must use
big-endian serialization according to the Unicode standard.
Preserve the existing behavior for systems which do not have this knob
enabled, since they may use optimized implementations, including
defaulting to the native endianness, which may improve performance.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The setup code uses octal values with printf to generate a BOM for
UTF-16/32 BE/LE. It specifically uses '\777' to emit a 0xff byte. This
relies on the fact that most shells truncate the value above 0o377.
Ash however interprets '\777' as '\77' + a literal '7', resulting in an
invalid BOM.
Fix this by using the proper value of 0xff: '\377'.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a '!' character to start a non-matching pattern bracket
expression, as specified by POSIX in Shell Command Language section
2.13.1 Patterns Matching a Single Character [1].
I used '^' instead in three places in the previous three commits, to
verify that the arguments of the '--stress=' and '--stress-limit='
options and the values of various '*_PORT' environment variables are
valid numbers. With certain shells, at least with dash (upstream and
in Ubuntu 14.04) and mksh, this led to various undesired behaviors:
# error message in case of a valid number
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=8
error: --stress=<N> requires the number of jobs to run
# not the expected error message
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=foo
./t3903-stash.sh: 238: test: Illegal number: foo
# no error message at all?!
$ mksh ./t3903-stash.sh --stress=foo
$ echo $?
0
Some other shells, e.g. Bash (even in posix mode), ksh, dash in Ubuntu
16.04 or later, are apparently happy to accept '^' just as well.
[1] http://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_13
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d0aaa46fd3 ("commit: move empty message checks to libgit",
2017-11-10) removes the last use of 'sign_off_header' outside of
the "sequencer.c" source file. Remove the extern declaration from
the header file and mark the definition of the symbol with the
static keyword.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The NonStop platform needs this configuration item specified as
UnfortunatelyYes so that config directory files are correctly processed.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a review of a patch, we noticed that we use our own imitation
of 'yes' with the limit of 99 lines. It is very tempting to lift this
arbitrary limit, but the limit is there for a reason.
Add an in-code comment to prevent future developers from wasting
their time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "rebase -i --reschedule-failed-exec", we do not want the "-y"
shortcut after all.
* js/rebase-i-redo-exec-fix:
Revert "rebase: introduce a shortcut for --reschedule-failed-exec"
"git checkout [<tree-ish>] <pathspec>" started reporting the number
of paths that have got updated recently, but the same messages were
given when "git checkout -m <pathspec>" to unresolve conflicts that
have just been resolved. The message now reports these unresolved
paths separately from the paths that are checked out from the index.
* nd/checkout-noisy-unmerge:
checkout: count and print -m paths separately
checkout: update count-checkouts messages
Some errors from the other side coming over smart HTTP transport
were not noticed, which has been corrected.
* js/smart-http-detect-remote-error:
t5551: test server-side ERR packet
remote-curl: tighten "version 2" check for smart-http
remote-curl: refactor smart-http discovery
Let's suppose that a test somehow becomes flaky between 'master' and
'pu', and tends to fail within the first 50 repetitions when run with
'--stress'. In such a case we could use 'git bisect' to find the
culprit: if the test script fails with '--stress', then the commit is
definitely bad, but if it survives, say, 300 repetitions, then we could
consider it good with reasonable confidence.
Unfortunately, all this could only be done manually, because
'--stress' would run the test script repeatedly for all eternity on a
good commit, and it would exit with success even when it found a
failure on a bad commit.
So let's make '--stress' usable with 'git bisect run':
- Make it exit with failure if a failure is found.
- Add the '--stress-limit=<N>' option to repeat the test script
at most N times in each of the parallel jobs, and exit with
success when the limit is reached.
And then we could simply run something like:
$ git bisect start origin/pu master
$ git bisect run sh -c 'make && cd t &&
./t1234-foo.sh --stress --stress-limit=300'
Sure, as a brand new feature it won't be any useful right now, but in
a release or three most cooking topics will already contain this, so
we could automatically bisect at least newly introduced flakiness.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano