kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Matthieu Moy	85e2233f98	branch: warn and refuse to set a branch as a tracking branch of itself. Previous patch allows commands like "git branch --set-upstream foo foo", which doesn't make much sense. Warn the user and don't change the configuration in this case. Don't die to let the caller finish its job in such case. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Ilari Liusvaara	4fc5006676	Add branch --set-upstream Add --set-upstream option to branch that works like --track, except that when branch exists already, its upstream info is changed without changing the ref value. Based-on-patch-from: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Thomas Rast	d824cbba02	Convert existing die(..., strerror(errno)) to die_errno() Change calls to die(..., strerror(errno)) to use the new die_errno(). In the process, also make slight style adjustments: at least state _something_ about the function that failed (instead of just printing the pathname), and put paths in single quotes. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	a2fab531bb	strbuf_check_branch_ref(): a helper to check a refname for a branch This allows a common calling sequence strbuf_branchname(&ref, name); strbuf_splice(&ref, 0, 0, "refs/heads/", 11); if (check_ref_format(ref.buf)) die(...); to be refactored into if (strbuf_check_branch_ref(&ref, name)) die(...); Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	a552de75eb	strbuf_branchname(): a wrapper for branch name shorthands The function takes a user-supplied string that is supposed to be a branch name, and puts it in a strbuf after expanding possible shorthand notation. A handful of open coded sequence to do this in the existing code have been changed to use this helper function. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	431b1969fc	Rename interpret/substitute nth_last_branch functions These allow you to say "git checkout @{-2}" to switch to the branch two "branch switching" ago by pretending as if you typed the name of that branch. As it is likely that we will be introducing more short-hands to write the name of a branch without writing it explicitly, rename the functions from "nth_last_branch" to more generic "branch_name", to prepare for different semantics. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	72f600832f	Improve "git branch --tracking" output An earlier patch always spelled the full name of the ref that we track (e.g. "refs/heads/frotz" instead of just "frotz" when we mean the branch whose name is "frotz"). Worse yet, because we now use the true name of the ref at the original repository when talk about a tracking branch that copies from a remote, such a full name alone still does not give enough information. This reorganizes the verbose codepath to: - differentiate "refs/heads/something" and everything else; we say that the branch tracks "branch <something>" if it begins with "refs/heads/", and otherwise the branch tracks "ref refs/<someother>/<something>"; - report the name of the remote when we talk about a tracking branch, by saying "branch frotz from origin"; - not say "by merging" at the end; it is the default and is not worth reporting. Signed-off-by: Junio C Hamano <junio@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	a9f2c13685	Make git-clone respect branch.autosetuprebase When git-clone creates an initial branch it was not checking the branch.autosetuprebase configuration option (which may exist in ~/.gitconfig). Refactor the code used by "git branch" to create a new branch, and use it instead of the insufficiently duplicated code in builtin-clone. Changes are partly, and the test is mostly, based on the previous work by Pat Notz. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	8415d5c7ef	Teach the "@{-1} syntax to "git branch" This teaches the new "@{-1} syntax to refer to the previous branch to "git branch". After looking at somebody's faulty patch series on a topic branch too long, if you decide it is not worth merging, you can just say: $ git checkout master $ git branch -D @{-1} to get rid of it without having to type the name of the topic you now hate so much for wasting a lot of your time. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	51a94af845	Fix "checkout --track -b newbranch" on detached HEAD The test to make sure that checkout fails when --track was asked for and we cannot set up tracking information in t7201 was wrong, and it turns out that the implementation for that feature itself was buggy. This fixes it. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Miklos Vajna	cf10f9fdd5	builtin-commit: use reduce_heads() only when appropriate Since commit `6bb6b034` (builtin-commit: use commit_tree(), 2008-09-10), builtin-commit performs a reduce_heads() unconditionally. However, it's not always needed, and in some cases even harmful. reduce_heads() is not needed for the initial commit or for an "ordinary" commit, because they don't have any or have only one parent, respectively. reduce_heads() must be avoided when 'git commit' is run after a 'git merge --no-ff --no-commit', otherwise it will turn the non-fast-forward merge into fast-forward. For the same reason, reduce_heads() must be avoided when amending such a merge commit. To resolve this issue, 'git merge' will write info about whether fast-forward is allowed or not to $GIT_DIR/MERGE_MODE. Based on this info, 'git commit' will only perform reduce_heads() when it's committing a merge and fast-forward is enabled. Also add test cases to ensure that non-fast-forward merges are committed and amended properly. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>	16 years ago
Johannes Schindelin	0af0ac7ebb	Move MERGE_RR from .git/rr-cache/ into .git/ If you want to reuse the rerere cache in another repository, and set a symbolic link to it, you do not want to have the two repositories interfer with each other by accessing the _same_ MERGE_RR. For example, if you use contrib/git-new-workdir to set up a second working directory, and you have a conflict in one working directory, but commit in the other working directory first, the wrong "resolution" will be recorded. The easy solution is to move MERGE_RR out of the rr-cache/ directory, which also corresponds with the notion that rr-cache/ contains cached resolutions, not some intermediate temporary states. Noticed by Kalle Olavi Niemitalo. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Dustin Sallings	0a02186f92	Allow tracking branches to set up rebase by default. Change `cd67e4d4` introduced a new configuration parameter that told pull to automatically perform a rebase instead of a merge. This change provides a configuration option to enable this feature automatically when creating a new branch. If the variable branch.autosetuprebase applies for a branch that's being created, that branch will have branch.<name>.rebase set to true. Signed-off-by: Dustin Sallings <dustin@spy.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Dustin Sallings	c998ae9baa	Allow tracking branches to set up rebase by default. Change `cd67e4d4` introduced a new configuration parameter that told pull to automatically perform a rebase instead of a merge. This change provides a configuration option to enable this feature automatically when creating a new branch. If the variable branch.autosetuprebase applies for a branch that's being created, that branch will have branch.<name>.rebase set to true. Signed-off-by: Dustin Sallings <dustin@spy.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jay Soffian	9ed36cfa35	branch: optionally setup branch..merge from upstream local branches "git branch" and "git checkout -b" now honor --track option even when the upstream branch is local. Previously --track was silently ignored when forking from a local branch. Also the command did not error out when --track was explicitly asked for but the forked point specified was not an existing branch (i.e. when there is no way to set up the tracking configuration), but now it correctly does. The configuration setting branch.autosetupmerge can now be set to "always", which is equivalent to using --track from the command line. Setting branch.autosetupmerge to "true" will retain the former behavior of only setting up branch..merge for remote upstream branches. Includes test cases for the new functionality. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Daniel Barkalow	c369e7b805	Move code to clean up after a branch change to branch.c Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>	17 years ago
Daniel Barkalow	e496c00348	Move create_branch into a library file You can also create branches, in exactly the same way, with checkout -b. This introduces branch.{c,h} library files for doing porcelain-level operations on branches (such as creating them with their appropriate default configuration). Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>	17 years ago

18 Commits (921eabde9d0b9b43b293b37ac701bdfd10a64f54)