The provider chain so far holds the diff-hunks store in front of the
terminal builtin computation. Open it to external processes: a pair on
a path whose driver configures diff.<driver>.process is answered by a
long-running process speaking a pkt-line protocol (following the filter
process protocol), registered at the head of the chain and consulted
before the store and before any blob is loaded.
The protocol starts with the smallest request that can carry an answer:
object names alone. A request is the pathname and the pair's
old-oid/new-oid, with no content. The process answers with hunk lines,
with a zero-hunk success that asserts the blobs equivalent (trailing
newlines included), or with status=need-content, on which the pair
falls through to the builtin answer. This serves the two shapes that
need no content pushed to them: a cache keyed on the blob pair, and a
process that fetches the blobs itself (for example over "git cat-file
--batch"). A pair whose side is not a stored blob carries a NULL id;
the provider sends no request and passes it. Because Git holds no
content for the exchange, the answer is used as sent: hunks are
validated for order, overlap, lockstep alignment, and magnitude, then
replayed without the normalization xdiff applies to diffs it computes
itself. The magnitude bound is the blobs' sizes, read from the object
database without loading content: a blob of N bytes holds at most N
lines.
Because the process's answer is authoritative, it outranks the store,
and its head-of-chain position says so. A pair the process answers
never reaches the store and is never recorded, so nothing it produces
enters the store, which holds the builtin answer only. A request it
does not answer, whether need-content, a missing capability, or a
missing id, passes down the chain to the builtin answer, which is what
the store serves, so the store may serve such a pair and a warming run
may record it. Entries recorded before a process was configured are
not purged; a pair the process answers ignores them, and "git diff-hunks
clear" discards them.
The provider gates itself per request. The driver is looked up by the
old-side path, so a renamed file resolves to the same driver, and by
the repository-relative path, so a diff.relative run from a
subdirectory names the pair the same way. Options the process is never
told about select no process: the whitespace-ignoring options, -I,
--anchored, and an algorithm forced by option or configuration (blame
routes its algorithm through xdl_opts, so --histogram is covered). The
request gains its last field, the path; the consumers change only by
filling it, and neither names the process.
The provider's state is its repository's pool of running processes,
keyed by the configured command, so drivers sharing a command share a
process, a submodule speaks to its own, and releasing the provider
(from repo_clear()) stops them. The pool owns a copy of each command
string, so an entry outlives a config re-read. A command that fails
stays as an entry that is not retried: its request and every later one
pass, so the store may serve the path for the rest of the command.
A protocol error in a response never kills the command. The response
is read through a packet reader gentle about framing, so an error takes
one path: a single warning, the process stopped and marked failed, and
the builtin diff for the rest of the command. That covers garbage
bytes, a truncated response, an empty packet, a bare status, and an
unrecognized status. Semantically invalid coordinates cost only their
pair: the response is drained, the pair is computed, and the process
stays alive. A path the protocol cannot carry (an embedded newline, or
one too long for a packet) falls back per path rather than costing the
command its process. The handshake keeps one fatal check: a process
that announces a capability Git did not request aborts the command, as
the long-running filter protocol does.
Consulting is allowed per command, following the allow_textconv
precedent. "git diff", "git log" and "git show", and "git blame" set
allow_diff_process; the plumbing diff commands and the interactive-patch
machinery never set it, so scripted and staging output stays builtin.
The options adjust the flag:
- --no-ext-diff clears it and --ext-diff sets it;
- --diff-process and --no-diff-process set and clear it alone, leaving
external diff drivers as they were;
- format-patch clears it unconditionally, so a generated patch applies
for recipients without the process;
- range-diff passes --no-ext-diff to the "git log" it compares.
git blame and the summary formats consult the process. For blame, a
pair reported equivalent emits no hunks, so the whole commit passes to
its parent. In the stat formats such a pair sums to a zero-count entry,
which the "nothing changed" rule omits, as under -w. The subprocess is
long-running: one startup cost across a traversal, one round-trip per
consulted pair. Answers travel in struct xdl_hunk, new in
xdiff-interface.h, holding xdiff's 1-based coordinates; nothing feeds
them back to xdiff, since only coordinate consumers consult.
A content-carrying request is the natural extension: it would serve
sides that are not stored blobs and processes that want content pushed
to them, and bring patch output and log -L's range tracking to the same
answer. As it stands, a process's answers show in blame and the summary
formats while patch output stays builtin.
t4080 exercises the protocol, the per-command gate, and the error paths:
- each adversarial response shape warns and falls back to builtin, the
request log proving which failures disable the process and which keep
it alive (a malformed hunk line, coordinates past the blob size, a
count overflowing strtol(), overlapping or misaligned hunks, an
unrecognized status, a bare status, an empty packet, a mid-response
crash, and raw garbage);
- a capability-less process and status=abort degrade without noise, and
a failed start warns once and returns the path to the store;
- a trailing token on a hunk line is ignored, pinning field
appendability;
- positive consults for git diff, git show, and diff-tree under
--ext-diff and --diff-process; textconv output and gitlink sides are
never identified; a diff.relative run consults by the repo-relative
path;
- the equivalence answer is pinned from both consumers, and a warming
run past a deferring process records the pair for a later read.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Blame and "git log --stat" recover hunk coordinates by diffing blob
pairs, and recompute them on every run. Add a cache of those
coordinates at $GIT_DIR/objects/info/diff-hunks, beside the
commit-graph, so a later run can look them up instead of decompressing
the blobs and running xdiff again.
The store is a single chunk-format file (see gitformat-chunk(5)): an
8-byte header, a DHIX index of fixed-size entries sorted by key, a DHDT
segment of hunk records, and a trailing hash checksum. An entry is
keyed by the two blob object ids and the xdl_opts the pair was diffed
under, so a stored result is served only where that exact key recurs,
independent of path. A zero-context diff trims unchanged lines from
hunk edges and can pick a different but equally valid set of hunks than
an untrimmed diff, so a recording caller stores a pair only when its
trimmed and untrimmed diffs are identical; such an entry answers any
consumer at any context, and the rare divergent pair is always
computed. Identical hunk blocks are interned once and shared across
keys.
The library provides a reader (repo_diff_hunks_store and _replay, gated
by core.diffHunks), loaded once and cached on the object database as the
commit-graph is, and a writer that accumulates entries and flushes them
in one atomic pass. An absent, corrupt, or disabled store reads as all
misses. A record with no hunks is invalid too: replaying it would claim
the pair equivalent, which the store never asserts, so it reads as a
miss.
Ordinary reads are diagnostic-free. Loading parses the chunk table
through read_table_of_contents_quiet(), new in chunk-format, which
prints nothing on a malformed table and takes the repository's hash
algorithm rather than the_hash_algo, so the file is bounds-checked under
the algorithm it is keyed by.
The flush closes the repository's mmapped store and forgets that loading
was attempted before committing the lockfile. A warming run that also
reads may hold the file it is replacing mapped, and the rename must not
land on a live mapping, which Windows refuses; a read after the flush
then observes the committed file. commit-graph closes its graph before
committing for the same reason.
Writing is off by default, enabled per run by GIT_DIFF_HUNKS_WRITE or
persistently by diffHunks.write, the environment winning. A writer
seeds from the existing store, so a flush merges rather than replaces.
The seed's checksum is verified first: a corrupt store is discarded, not
rewritten with a fresh checksum verify could no longer catch. An entry
that fails the shared diff_provider_check_hunk() or names no blob is
dropped with a warning, since it would only ever read as a miss. A seed
that discarded or dropped anything forces the flush even when the
warming run computed nothing new. The writer fsyncs through a new
diff-hunks core.fsync component.
"git diff-hunks" inspects and manages the file: "verify" checks the
checksum, chunk table, sort order, entry bounds, and every entry's hunk
sequence against that shared check, so a store whose entries could only
read as misses fails verify; "clear" removes the file. Later patches
wire the readers and the writer into the diff and blame paths.
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Defining an external diff driver" section explains how to
configure diff.<driver>.command but not how the driver relates to the
rest of Git's diff machinery. In particular, the command only
replaces the textual patch: word diff, function context, color, and
the like cannot apply to its output, while the summary formats, blame,
and git log -L do not run it at all and keep using the builtin diff.
Spell this out so the scope of an external diff driver is clear.
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/line-log-limited-ops:
diffcore-pickaxe: scope -G to the -L tracked range
diff: support --check with -L line ranges
line-log: support diff stat formats with -L
diff: extract a line-range diff helper for reuse
diff: emit -L hunk headers via xdiff's formatter
diff: simplify the line-range filter by classifying removals immediately
diff: rename and group the line-range filter for clarity
The usage string and SYNOPSIS for 'git fast-export' have been
standardized to make them consistent with each other and with other
commands.
* cc/doc-fast-export-synopsis-fix:
fast-export: standardize usage string and SYNOPSIS
The '[includeIf "condition"]' conditional inclusion facility for
configuration files has been taught to use the location of the
worktree in its condition.
* cl/conditional-config-on-worktree-path:
config: add "worktree" and "worktree/i" includeIf conditions
config: refactor include_by_gitdir() into include_by_path()
The contributor guide has been updated to advise new contributors to
trim irrelevant quoted text when replying to review comments, matching
the existing advice given to reviewers.
* wy/doc-myfirstcontribution-trim-quotes:
MyFirstContribution: mention trimming quoted text in replies
The 'SubmittingPatches' document has been updated to explicitly
describe the expectation for contributors to retract or abandon their
patch series when they are no longer pursuing it.
* jc/submitting-patches-abandoning:
SubmittingPatches: document how to retract a topic
A description in the release notes for Git 2.55.0 has been
retroactively updated to clarify that Rust support is enabled by
default, but still optional, and will become mandatory in Git 3.0.
* jc/relnotes-2.55-rust-fix:
Rust: fix description in Release Notes to 2.55
The alignment of commit object name abbreviations in 'git blame'
output has been optimized to reserve a column for marks (caret,
question mark, or asterisk) only when such marks are actually shown.
* rs/blame-abbrev-marks:
blame: reserve mark column only if necessary
The experimental 'git history' command has been taught a new 'drop'
subcommand to remove a commit, with its descendants replayed onto its
parent.
* ps/history-drop:
builtin/history: implement "drop" subcommand
builtin/history: split handling of ref updates into two phases
replay: expose `replay_result_queue_update()`
reset: stop assuming that the caller passes in a clean index
reset: allow the caller to specify the current HEAD object
reset: introduce ability to skip updating HEAD
reset: introduce dry-run mode
reset: modernize flags passed to `reset_working_tree()`
reset: rename `reset_head()`
reset: drop `USE_THE_REPOSITORY_VARIABLE`
read-cache: split out function to drop unmerged entries to stage 0
The 'git refs' toolbox has been extended with new 'create', 'delete',
'update', and 'rename' subcommands to create, delete, update, and
rename references, respectively.
* ps/refs-writing-subcommands:
builtin/refs: add "rename" subcommand
builtin/refs: add "create" subcommand
builtin/refs: add "update" subcommand
builtin/refs: add "delete" subcommand
builtin/refs: drop `the_repository`
The output of `git fast-export -h` currently starts with:
usage: git fast-export [<rev-list-opts>]
while the SYNOPSIS section in this command's documentation shows:
'git fast-export' [<options>] | 'git fast-import'
Let's make both of these consistent with each other and with other Git
commands by describing the arguments with:
[<options>] [<revision-range>] [[--] <path>...]
This takes into account the following:
- `git fast-export` accepts both rev-list arguments and a number of
genuine options of its own (--[no-]progress, --[no-]signed-tags,
--[no-]signed-commits, etc).
- `git fast-export` was the only command using `[<rev-list-opts>]`
while many other commands describe their revision arguments as
`[<revision-range>] [[--] <path>...]`.
- In the DESCRIPTION section of the documentation, it's already
mentioned several times that the output should eventually be fed to
`git fast-import`.
This also enables us to remove fast-export from
"t/t0450/adoc-help-mismatches".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git push origin/main' or 'git branch origin main' is run, the
command is now recognized as a potential typo, and advice has been
added to offer a typo fix.
* hn/branch-push-slip-advice:
push: suggest <remote> <branch> for a slash slip
branch: suggest <remote>/<branch> on upstream slip
The includeIf mechanism already supports matching on the .git
directory path (gitdir) and the currently checked out branch
(onbranch). But in multi-worktree setups the .git directory of a
linked worktree points into the main repository's .git/worktrees/
area, which makes gitdir patterns cumbersome when one wants to
include config based on the working tree's checkout path instead.
Introduce two new condition keywords:
- worktree:<pattern> matches the realpath of the current worktree's
working directory (i.e. repo_get_work_tree()) against a glob
pattern. This is the path returned by git rev-parse
--show-toplevel.
- worktree/i:<pattern> is the case-insensitive variant.
The implementation reuses the include_by_path() helper introduced in
the previous commit, passing the worktree path in place of the
gitdir. The condition never matches in bare repositories (where
there is no worktree) or during early config reading (where no
repository is available).
Add documentation describing the new conditions, including a comparison
with extensions.worktreeConfig and a note that worktree matching currently
uses the realpath-resolved worktree location. Add tests covering bare
repositories, multiple worktrees, realpath-resolved symlinked worktree
paths, case-sensitive and case-insensitive matching, early config reading,
and non-repository scenarios.
Signed-off-by: Chen Linxuan <me@black-desk.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While this document outlines an idealized lifecycle where an author
develops a patch, refines it with reviewer feedback, and
successfully merges it into Git, reality is rarely so seamless.
Sometimes, a topic must be abandoned. Doing so explicitly is far
better than leaving it in limbo, especially since topics can always
be resurrected later.
Clearly state that we encourage contributors to retract any topic
that does not pan out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finish incomplete sentence to say that we
- build Git 2.55 by default with Rust,
- but you can opt out and build 2.55 without Rust,
- but Rust will become mandatory in Git 3.0 and later.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation on community contribution guidelines has been updated to
encourage replying to review comments before rerolling, and to advise
a default limit of at most one reroll per day to give reviewers across
different time zones enough time to participate.
* wy/doc-clarify-review-replies:
doc: advise batching patch rerolls
doc: encourage review replies before rerolling
The "git repo info" command has been taught new keys to output both
absolute and relative paths for "gitdir" and "commondir", supported by
a new path-formatting helper extracted from "git rev-parse".
* jk/repo-info-path-keys:
repo: add path.gitdir with absolute and relative suffix formatting
repo: add path.commondir with absolute and relative suffix formatting
path: extract format_path() and use in rev-parse
"git log --follow" has been updated to better handle non-linear
history, in which the path being tracked gets renamed differently in
multiple history lines.
* mv/log-follow-mergy:
log: improve --follow following renames for non-linear history
The pack-objects command has been updated to support reachability
bitmaps and delta-islands concurrently with the `--path-walk` option,
allowing faster packaging by falling back to path-walk when bitmaps
cannot fully satisfy the request.
* tb/pack-path-walk-bitmap-delta-islands:
pack-objects: support `--delta-islands` with `--path-walk`
pack-objects: extract `record_tree_depth()` helper
pack-objects: support reachability bitmaps with `--path-walk`
t/perf: drop p5311's lookup-table permutation
The documentation in SubmittingPatches has been updated to clarify how
patch contributors should respond to design and viability critiques,
and how the resolution of such critiques should be recorded in the
final commit messages.
* jc/submittingpatches-design-critiques:
SubmittingPatches: address design critiques
The trailer sections in SubmittingPatches have been updated to
encourage use of standard trailers.
* kh/submittingpatches-trailers:
SubmittingPatches: note that trailer order matters
SubmittingPatches: be consistent with trailer markup
SubmittingPatches: document Based-on-patch-by trailer
SubmittingPatches: discourage common Linux trailers
SubmittingPatches: encourage trailer use for substantial help
The `fetch.followRemoteHEAD` configuration variable has been added to
provide a default for the per-remote `remote.<name>.followRemoteHEAD`
setting.
* mh/fetch-follow-remote-head-config:
fetch: fixup a misaligned comment
fetch: add configuration variable fetch.followRemoteHEAD
fetch: refactor do_fetch handling of followRemoteHEAD
fetch: return 0 on known git_fetch_config
fetch: rename function report_set_head
t5510: cleanup remote in followRemoteHEAD dangling ref test
doc: explain fetchRemoteHEADWarn advice
fetch: fixup set_head advice for warn-if-not-branch
Project-specific configuration for b4 has been introduced, and the
documentation has been updated to recommend using it as a
streamlined method for submitting patches.
* ps/doc-recommend-b4:
b4: introduce configuration for the Git project
MyFirstContribution: recommend the use of b4
MyFirstContribution: recommend shallow threading of cover letters
The handling of promisor-remote protocol capability has been updated
to allow the other side to add to the list of promisor remotes via the
'promisor.acceptFromServerURL' configuration variable.
* cc/promisor-auto-config-url-more:
doc: promisor: improve acceptFromServer entry
promisor-remote: auto-configure unknown remotes
promisor-remote: trust known remotes matching acceptFromServerUrl
promisor-remote: introduce promisor.acceptFromServerUrl
promisor-remote: add 'local_name' to 'struct promisor_info'
urlmatch: add url_normalize_pattern() helper
urlmatch: change 'allow_globs' arg to bool
t5710: simplify 'mkdir X' followed by 'git -C X init'
Add a "rename" subcommand to git-refs(1) with the syntax:
$ git refs rename <oldref> <newref>
It renames <oldref> together with its reflog to <newref>; even when used
on a local branch ref, the current value and the reflog of the ref are
the only things that are renamed. Document it and redirect casual users
to "git branch -m" if that is what they wanted to do.
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "update" subcommand cannot only update an existing reference, but it
can also create new branches and delete existing branches by specifying
the all-zeroes object ID as either old or new value. Despite that, we
already have the "delete" subcommand as a handy shortcut so that a user
can easily delete a branch. This relieves them of needing to understand
the more arcane uses of the "update" command, and of counting the number
of zeroes they need to pass.
But while we have a "delete" subcommand, we don't have an equivalent
that would allow the user to create a new branch, which creates a
certain asymmetry.
Add a new "create" subcommand to plug this gap.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "update" subcommand which mirrors `git update-ref <refname>
<oldoid> <newoid>`. This follows the same reasoning as the preceding
commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reference-related functionality in Git is currently spread across many
different commands: git-update-ref(1), git-for-each-ref(1),
git-show-ref(1), git-pack-refs(1) and git-symbolic-ref(1). This makes it
hard for users to discover what functionality we have available to work
with references.
We have thus started to consolidate this functionality into git-refs(1),
which is a toolbox of everything related to references. Until now, the
command doesn't handle functionality of git-update-ref(1).
Fix this gap by introducing a new "delete" subcommand, which is the
equivalent of `git update-ref -d`.
Note that we're intentionally not using a generic "write" subcommand
with a "-d" flag. This is rather harder to discover, and subcommands
that are implmented as flags tend to be hard to reason about in the code
as we'd have to handle mutually-exclusive flags that stem from the other
subcommand-like modes.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git blame prepends commit hashes of boundary commits with "^", ignored
commits with "?" and unblamable commits with "*" and reserves one column
for them by extending the hash abbreviation, to avoid showing ambiguous
hashes.
This reserved column wastes precious screen space, which can be
especially irritating when using the option -b to blank out boundary
commit hashes and not ignoring any commits. Reserve it only as needed,
i.e. if any of those cases are actually shown.
Pointed-out-by: Laszlo Ersek <laszlo.ersek@posteo.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common operation when editing the commit history is to drop a specific
commit from the history entirely, but this operation is not currently
covered by git-history(1).
A couple of noteworthy bits:
- This is the first git-history(1) command that will ultimately result
in changes to both the index and the working tree. We thus have to
add logic to merge resulting changes into those.
- It is still not possible to replay merge commits, so this limitation
is inherited for the new "drop" command.
- For now we refuse to drop root commits. While we _can_ indeed drop
root commits in the general case, there are edge cases where the
resulting history would become completely empty. This is thus left
to a subsequent patch series.
Other than that, most of the logic is rather straight-forward as we can
continue to build on the preexisting logic in git-history(1) for most of
the part.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git log -L scopes its diff output to the tracked range, but pickaxe
(-S, -G) still runs in diffcore over the whole-file change, so -L -G
selects a commit whenever the pattern appears in any added or removed
line of the file, even outside the tracked range.
Teach -G to honor the range. diff_grep() already runs an xdiff pass
and greps the +/- lines; route that pass through the line-range filter
so only the tracked range's lines are grepped. Expose the filter as
diff_emit_line_ranges(), an xdi_diff_outf() that emits only the tracked
range's lines, thread the filepair's line_ranges through the pickaxe
callback, and pass it from pickaxe_match(). Skip scoping under
textconv, whose output is not in the original file's line coordinates.
-G needs only a hit/no-hit answer, so the line-number concerns the
filter handles for patch and check output do not apply here.
-S is left matching the whole file: it counts needle occurrences per
blob rather than grepping the diff, so scoping it needs a different
approach, left to a follow-up. has_changes() takes the range parameter
but ignores it for now.
Document the resulting -L pickaxe scoping: -G is scoped to the tracked
range, while -S still matches the whole file.
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin_checkdiff() runs its own xdiff pass to detect whitespace
errors in newly added lines. When -L is active, the check should
be scoped to the tracked line ranges rather than the whole file.
Reuse the line_range_filter to wrap checkdiff_consume(), the same
pattern already used for patch output and diffstat. The filter
forwards only in-range lines for whitespace checking.
checkdiff reports the file line number of each error, which it
normally learns from the hunk header via checkdiff_consume_hunk().
The filter synthesizes its own hunk headers, so give it an optional
hunk callback and route checkdiff_consume_hunk() through it; this
sets the post-image position before the in-range lines are replayed.
Without it the reported line numbers would count from the start of
the range hunk rather than the start of the file.
The trailing blank-at-eof check is a second pass that scans the whole
file via check_blank_at_eof(), so gate its report on the tracked
ranges as well; otherwise a blank line added at end of file is
reported even when it lies outside the range.
Add DIFF_FORMAT_CHECKDIFF to the -L output format allowlist in
setup_revisions() so that -L --check is accepted, and list --check
among the supported formats in the documentation. Add tests covering
that whitespace errors are reported, scoped to the tracked range, and
labeled with the correct file line number, including when two errors
in one range are separated by a gap that would otherwise split into
multiple xdiff hunks.
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reuse the line_range_filter in builtin_diffstat() so the stat formats
count only the lines within the tracked range. When a filepair carries
line_ranges, the filter wraps diffstat_consume() as its output callback,
forwarding only the lines inside the range for counting.
flush_range_hunk() replays buffered content through diffstat_consume(),
which ignores synthetic @@ headers since it only counts '+' and '-'
lines.
Expand the output format allowlist in setup_revisions() to accept
--stat, --numstat, and --shortstat with -L.
Leave --dirstat out of the allowlist so it is rejected like any other
unsupported format. Its default mode counts each file's whole-file
byte damage via diffcore_count_changes(), outside the line-based
pipeline that the -L filter scopes, so bare --dirstat cannot honor the
tracked range. The --dirstat=lines mode could: it aggregates the same
per-file line counts as --numstat, which -L already scopes. But
accepting only that sub-mode while bare --dirstat keeps erroring is a
confusing split, so the whole format is deferred to a follow-up;
--numstat already reports the exact per-file counts within the tracked
range.
Also drop "yet" from the generic -L rejection message ("does not
yet support the requested diff format"). Some rejected formats do
not fit a line range at all, so "yet" wrongly implied they are all
just awaiting support.
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing the 'main' branch to the remote 'origin', i.e.,
$ git push origin main
it is easy to mistakenly write
$ git push origin/main
That is parsed as the repository to push to, and since 'origin/main'
is neither a configured remote nor a path it dies with:
fatal: 'origin/main' does not appear to be a git repository
Often 'origin/main' does not exist as a repository, so the command
fails without doing any harm, but it gives no hint that a space was
meant instead of a slash and can leave the user puzzled.
When the argument is not an existing path or configured remote but
its part before the first slash names one, suggest the intended
'<remote> <branch>' form:
$ git push origin main
The suggestion is shown as advice so it can be silenced with
advice.pushRepoLooksLikeRef.
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts need a stable way to locate the git directory without
parsing rev-parse output or relying on its flag-driven path format
selection. There is no way to retrieve this path from git repo info
today.
Introduce path.gitdir.absolute and path.gitdir.relative keys,
consistent with the path.commondir keys added in the previous patch.
Reuse the test_repo_info_path helper introduced there to validate
both variants.
Mentored-by: Justin Tobler <jltobler@gmail.com>
Mentored-by: Lucas Seiki Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: K Jayatheerth <jayatheerthkulkarni2005@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts working with worktree setups need a reliable way to discover
the common directory, which diverges from the git directory when
multiple worktrees are in use. There is no way to retrieve this path
from git repo info today.
Introduce path.commondir.absolute and path.commondir.relative keys.
Exposing explicit format variants rather than a single key with a
default avoids ambiguity for scripts that require predictable output.
Mentored-by: Justin Tobler <jltobler@gmail.com>
Mentored-by: Lucas Seiki Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: K Jayatheerth <jayatheerthkulkarni2005@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have a repo with a subtree merge, do a 'git log --follow prefix/test.c',
the output only contains history in the outer repo, not commits that
were merged via a subtree merge.
What happens is that 'git log --follow' stores the followed path only in
opt->diffopt.pathspec, so in case the commit history is non-linear, and
multiple parents have renames to the followed path, then the end result
isn't really defined: the first commit that happens to be visited in one
of the parents update opt->diffopt.pathspec, and from that point, only
that updated path is visited.
Fix the problem by introducing a commit -> path map
(follow_pathspec_slab) that stores what will be a path to follow when
visiting that parent. At the top of log_tree_commit(), if the slab has
an entry for this commit, we replace opt->diffopt.pathspec with a path
from this entry, so the correct path is followed, even if an unrelated
sub-tree changed the path to be followed to something else. After
log_tree_diff() runs, we record each parent's path in the slab. As a
result, the walk order doesn't matter, which was exactly the source of
problems previously.
This helps with subtree merges (rename happens inside the merge commit),
but also fixes the general case when the rename happens in the history
of parents, not in the merge commit itself.
Signed-off-by: Miklos Vajna <vmiklos@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the inception of `--path-walk`, this option has had a documented
incompatibility with `--delta-islands`.
When discussing those original patches on the list, a message from
Stolee in [1] noted the following:
this could be remedied by [...] doing a separate walk to identify
islands using the normal method
In a related portion of the thread, Peff explains[2]:
The delta islands code already does its own tree walk to propagate
the bits down (it does rely on the base walk's show_commit() to
propagate through the commits).
Once each object has its island bitmaps, I think however you
choose to come up with delta candidates [...] you should be able
to use it. It's fundamentally just answering the question of "am
I allowed to delta between these two objects".
That is similar to what this patch does, and it turns out the cheaper
option is sufficient: perform the same island side effects from the
path-walk callback rather than doing a second walk.
Recall how delta-islands are computed during a normal repack:
- `show_commit()` calls `propagate_island_marks()` for each commit,
which merges the commit's island bitset onto its root tree object and
onto each of its parent commits.
- `show_object()` for a tree records the tree's depth derived from the
slash-separated pathname. Subsequent `resolve_tree_islands()` uses
that depth to walk trees in increasing-depth order, propagating each
tree's marks to its children.
- At delta-search time, `in_same_island()` enforces that a delta
target's island bitmap is a subset of its base's: every island that
reaches the target must also reach the base.
Path-walk's enumeration callback is `add_objects_by_path()`. It already
adds objects to `to_pack`, but until now did not perform the
island-related side effects. Two things are needed:
- For each commit batch, call `propagate_island_marks()` on commits,
exactly as `show_commit()` does.
We have to be careful about the order in which we call this function,
and we must see a commit before its parents in order to have
island marks to propagate.
The path-walk batch preserves that order. Path-walk appends commits
to its `OBJ_COMMIT` batch as they come back from the same
`get_revision()` loop the regular traversal uses, and
`add_objects_by_path()` iterates the batch in array order. So every
commit reaches `propagate_island_marks()` in the same sequence that
`show_commit()` would have seen it, and the descendant-first chain
that the algorithm relies on is intact.
Skip island propagation for excluded commits to match the regular
traversal, whose `show_commit()` callback is only invoked for
interesting commits. Boundary commits may still be present in
path-walk's callback so they can serve as thin-pack bases, but they
should not contribute island marks.
- For each tree batch, record the tree's depth from the path. Use the
`record_tree_depth()` helper from the previous commit so both
callbacks behave identically, including the max-depth-wins behavior
when a tree is reached via more than one path. The helper accepts
both the `show_object()` path shape ("foo", "foo/bar") and the
path-walk shape with a trailing slash ("foo/", "foo/bar/"), so depths
recorded from either traversal mode are directly comparable.
This is implicit in the implementation sketch from Peff above.
`resolve_tree_islands()` sorts trees by `oe->tree_depth` in
increasing-depth order before propagating marks down, so that a
parent tree's marks are finalized before its children inherit them.
Without recording the depth at path-walk time, every
path-walk-discovered tree would land at depth 0 in `to_pack`, the
sort would lose its ordering, and children could inherit marks from
parents whose own contributions had not yet been merged in.
With those two pieces in place, `resolve_tree_islands()` receives the
same island inputs from path-walk as it would from the regular
traversal, so the existing island checks can be reused unchanged.
Drop the documented incompatibility between `--path-walk` and
`--delta-islands`, and add t5320 coverage for path-walk island repacks
with and without bitmap writing, as well as the same-island case where a
delta remains allowed.
[1]: https://lore.kernel.org/git/9aa2471b-0850-4707-9733-d3b33609f5f2@gmail.com/
[2]: https://lore.kernel.org/git/20240911063203.GA1538586@coredump.intra.peff.net/
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Montalbo