The codepaths that reach date_mode_from_type() have been updated to
pass "struct date_mode" by value to make them thread safe.
* rs/date-mode-pass-by-value:
date: make DATE_MODE thread-safe
"git pack-refs" learned the "--auto" option, which is a useful
addition to be triggered from "git gc --auto".
Acked-by: Karthik Nayak <karthik.188@gmail.com>
cf. <CAOLa=ZRAEA7rSUoYL0h-2qfEELdbPHbeGpgBJRqesyhHi9Q6WQ@mail.gmail.com>
* ps/pack-refs-auto:
builtin/gc: pack refs when using `git maintenance run --auto`
builtin/gc: forward git-gc(1)'s `--auto` flag when packing refs
t6500: extract objects with "17" prefix
builtin/gc: move `struct maintenance_run_opts`
builtin/pack-refs: introduce new "--auto" flag
builtin/pack-refs: release allocated memory
refs/reftable: expose auto compaction via new flag
refs: remove `PACK_REFS_ALL` flag
refs: move `struct pack_refs_opts` to where it's used
t/helper: drop pack-refs wrapper
refs/reftable: print errors on compaction failure
reftable/stack: gracefully handle failed auto-compaction due to locks
reftable/stack: use error codes when locking fails during compaction
reftable/error: discern locked/outdated errors
reftable/stack: fix error handling in `reftable_stack_init_addition()`
date_mode_from_type() modifies a static variable and returns a pointer
to it. This is not thread-safe. Most callers of date_mode_from_type()
use it via the macro DATE_MODE and pass its result on to functions like
show_date(), which take a const pointer and don't modify the struct.
Avoid the static storage by putting the variable on the stack and
returning the whole struct date_mode. Change functions that take a
constant pointer to expect the whole struct instead.
Reduce the cost of passing struct date_mode around on 64-bit systems
by reordering its members to close the hole between the 32-bit wide
.type and the 64-bit aligned .strftime_fmt as well as the alignment
hole at the end. sizeof reports 24 before and 16 with this change
on x64. Keep .type at the top to still allow initialization without
designator -- though that's only done in a single location, in
builtin/blame.c.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work to support a repository that work with both SHA-1 and SHA-256
hash algorithms has started.
* eb/hash-transition: (30 commits)
t1016-compatObjectFormat: add tests to verify the conversion between objects
t1006: test oid compatibility with cat-file
t1006: rename sha1 to oid
test-lib: compute the compatibility hash so tests may use it
builtin/ls-tree: let the oid determine the output algorithm
object-file: handle compat objects in check_object_signature
tree-walk: init_tree_desc take an oid to get the hash algorithm
builtin/cat-file: let the oid determine the output algorithm
rev-parse: add an --output-object-format parameter
repository: implement extensions.compatObjectFormat
object-file: update object_info_extended to reencode objects
object-file-convert: convert commits that embed signed tags
object-file-convert: convert commit objects when writing
object-file-convert: don't leak when converting tag objects
object-file-convert: convert tag objects when writing
object-file-convert: add a function to convert trees between algorithms
object: factor out parse_mode out of fast-import and tree-walk into in object.h
cache: add a function to read an OID of a specific algorithm
tag: sign both hashes
commit: export add_header_signature to support handling signatures on tags
...
The test helper provides a "ref-store <store> pack-refs" wrapper that
more or less directly invokes `refs_pack_refs()`. This helper is only
used in a single test with the "PACK_REFS_PRUNE" and "PACK_REFS_ALL"
flags. Both of these flags can directly be accessed via git-pack-refs(1)
though via the `--all` and `--prune` flags, which makes the helper
superfluous.
Refactor the test to use git-pack-refs(1) instead of the test helper.
Drop the now-unused test helper command.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `merge_bases_many()` function was just taught to indicate parsing
errors, and now the `repo_get_merge_bases_many()` function is aware of
that, too.
Naturally, there are a lot of callers that need to be adjusted now, too.
Next stop: `repo_get_merge_bases_dirty()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently this function treats unrelated commit histories the same way
as commit histories with missing commit objects.
Typically, missing commit objects constitute a corrupt repository,
though, and should be reported as such. The next commits will make it
so, but there is one exception: In `git fetch --update-shallow` we
_expect_ commit objects to be missing, and we do want to treat the
now-incomplete commit histories as unrelated.
To allow for that, let's introduce an additional parameter that is
passed to `repo_in_merge_bases_many()` to trigger this behavior, and use
it in the two callers in `shallow.c`.
This commit changes behavior slightly: unless called from the
`shallow.c` functions that set the `ignore_missing_commits` bit, any
non-existing tip commit that is passed to `repo_in_merge_bases_many()`
will now result in an error.
Note: When encountering missing commits while traversing the commit
history in search for merge bases, with this commit there won't be a
change in behavior just yet, their children will still be interpreted as
root commits. This bug will get fixed by follow-up commits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref and reflog iterators share much of the same underlying code to
iterate over the corresponding entries. This results in some weird code
because the reflog iterator also exposes an object ID as well as a flag
to the callback function. Neither of these fields do refer to the reflog
though -- they refer to the corresponding ref with the same name. This
is quite misleading. In practice at least the object ID cannot really be
implemented in any other way as a reflog does not have a specific object
ID in the first place. This is further stressed by the fact that none of
the callbacks except for our test helper make use of these fields.
Split up the infrastucture so that ref and reflog iterators use separate
callback signatures. This allows us to drop the nonsensical fields from
the reflog iterator.
Note that internally, the backends still use the same shared infra to
iterate over both types. As the backends should never end up being
called directly anyway, this is not much of a problem and thus kept
as-is for simplicity's sake.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The priority queue test has been migrated to the unit testing
framework.
* cp/unit-test-prio-queue:
tests: move t0009-prio-queue.sh to the new unit testing framework
Tighten URL checks fsck makes in a URL recorded for submodules.
* vd/fsck-submodule-url-test:
submodule-config.c: strengthen URL fsck check
t7450: test submodule urls
test-submodule: remove command line handling for check-name
submodule-config.h: move check_submodule_url
t/t0009-prio-queue.sh along with t/helper/test-prio-queue.c unit
tests Git's implementation of a priority queue. Migrate the
test over to the new unit testing framework to simplify debugging
and reduce test run-time. Refactor the required logic and add
a new test case in addition to porting over the original ones in
shell.
Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to 't7450-bad-git-dotfiles.sh' to check the validity of different
submodule URLs. To verify this directly (without setting up test
repositories & submodules), add a 'check-url' subcommand to 'test-tool
submodule' that calls 'check_submodule_url' in the same way that
'check-name' calls 'check_submodule_name'.
Add two tests to separately address cases where the URL check correctly
filters out invalid URLs and cases where the check misses invalid URLs. Mark
the latter ("url check misses invalid cases") with 'test_expect_failure' to
indicate that this is currently broken, which will be fixed in the next step.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'check-name' subcommand to 'test-tool submodule' is documented as being
able to take a command line argument '<name>'. However, this does not work -
and has never worked - because 'argc > 0' triggers the usage message in
'cmd__submodule_check_name()'. To simplify the helper and avoid future
confusion around proper use of the subcommand, remove any references to
command line arguments for 'check-name' in usage strings and handling in
'check_name()'.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the recent codebase update (8bf6fbd00d (Merge branch
'js/doc-unit-tests', 2023-12-09)), a new unit testing framework was
merged, providing a standardized approach for testing C code. Prior to
this update, some unit tests relied on the test helper mechanism,
lacking a dedicated unit testing framework. It's more natural to perform
these unit tests using the new unit test framework.
This commit migrates the unit tests for C character classification
functions (isdigit(), isspace(), etc) from the legacy approach
using the test-tool command `test-tool ctype` in t/helper/test-ctype.c
to the new unit testing framework (t/unit-tests/test-lib.h).
The migration involves refactoring the tests to utilize the testing
macros provided by the framework (TEST() and check_*()).
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Achu Luma <ach.lumap@gmail.com>
Acked-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sideband demultiplexer fixes.
* jx/sideband-chomp-newline-fix:
pkt-line: do not chomp newlines for sideband messages
pkt-line: memorize sideband fragment in reader
test-pkt-line: add option parser for unpack-sideband
Streaming spans of packfile data used to be done only from a
single, primary, pack in a repository with multiple packfiles. It
has been extended to allow reuse from other packfiles, too.
* tb/multi-pack-verbatim-reuse: (26 commits)
t/perf: add performance tests for multi-pack reuse
pack-bitmap: enable reuse from all bitmapped packs
pack-objects: allow setting `pack.allowPackReuse` to "single"
t/test-lib-functions.sh: implement `test_trace2_data` helper
pack-objects: add tracing for various packfile metrics
pack-bitmap: prepare to mark objects from multiple packs for reuse
pack-revindex: implement `midx_pair_to_pack_pos()`
pack-revindex: factor out `midx_key_to_pack_pos()` helper
midx: implement `midx_preferred_pack()`
git-compat-util.h: implement checked size_t to uint32_t conversion
pack-objects: include number of packs reused in output
pack-objects: prepare `write_reused_pack_verbatim()` for multi-pack reuse
pack-objects: prepare `write_reused_pack()` for multi-pack reuse
pack-objects: pass `bitmapped_pack`'s to pack-reuse functions
pack-objects: keep track of `pack_start` for each reuse pack
pack-objects: parameterize pack-reuse routines over a single pack
pack-bitmap: return multiple packs via `reuse_partial_packfile_from_bitmap()`
pack-bitmap: simplify `reuse_partial_packfile_from_bitmap()` signature
ewah: implement `bitmap_is_empty()`
pack-bitmap: pass `bitmapped_pack` struct to pack-reuse functions
...
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace2 streams used to record the URLs that potentially embed
authentication material, which has been corrected.
* jh/trace2-redact-auth:
t0212: test URL redacting in EVENT format
t0211: test URL redacting in PERF format
trace2: redact passwords from https:// URLs by default
trace2: fix signature of trace2_def_param() macro
Stale URLs have been updated to their current counterparts (or
archive.org) and HTTP links are replaced with working HTTPS links.
* js/update-urls-in-doc-and-comment:
doc: refer to internet archive
doc: update links for andre-simon.de
doc: switch links to https
doc: update links to current pages
Introduce "git replay", a tool meant on the server side without
working tree to recreate a history.
* cc/git-replay:
replay: stop assuming replayed branches do not diverge
replay: add --contained to rebase contained branches
replay: add --advance or 'cherry-pick' mode
replay: use standard revision ranges
replay: make it a minimal server side command
replay: remove HEAD related sanity check
replay: remove progress and info output
replay: add an important FIXME comment about gpg signing
replay: change rev walking options
replay: introduce pick_regular_commit()
replay: die() instead of failing assert()
replay: start using parse_options API
replay: introduce new builtin
t6429: remove switching aspects of fast-rebase
We can use the test helper program "test-tool pkt-line" to test pkt-line
related functions. E.g.:
* Use "test-tool pkt-line send-split-sideband" to generate sideband
messages.
* Pipe these generated sideband messages to command "test-tool pkt-line
unpack-sideband" to test packet_reader_read() function.
In order to make a complete test of the packet_reader_read() function,
add option parser for command "test-tool pkt-line unpack-sideband".
* To remove newlines in sideband messages, we can use:
$ test-tool pkt-line unpack-sideband --chomp-newline
* To preserve newlines in sideband messages, we can use:
$ test-tool pkt-line unpack-sideband --no-chomp-newline
* To parse sideband messages using "demultiplex_sideband()" inside the
function "packet_reader_read()", we can use:
$ test-tool pkt-line unpack-sideband --reader-use-sideband
We also add new example sideband packets in send_split_sideband() and
add several new test cases in t0070. Among these test cases, we pipe
output of the "send-split-sideband" subcommand to the "unpack-sideband"
subcommand. We found two issues:
1. The two splitted sideband messages "Hello," and " world!\n" should
be concatenated together. But when we turn on use_sideband field of
reader to parse sideband messages, the first part of the splitted
message ("Hello,") is lost.
2. The newline characters in sideband 2 (progress info) and sideband 3
(error message) should be preserved, but they are both trimmed.
Will fix the above two issues in subsequent commits.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a binary search over the objects in a MIDX's bitmap
(i.e. in pseudo-pack order), the reader reconstructs the pseudo-pack
ordering using a combination of (a) the preferred pack, (b) the pack's
lexical position in the MIDX based on pack names, and (c) the object
offset within the pack.
In order to perform this binary search, the reader must know the
identity of the preferred pack. This could be stored in the MIDX, but
isn't for historical reasons, mostly because it can easily be inferred
at read-time by looking at the object in the first bit position and
finding out which pack it was selected from in the MIDX, like so:
nth_midxed_pack_int_id(m, pack_pos_to_midx(m, 0));
In midx_to_pack_pos() which performs this binary search, we look up the
identity of the preferred pack before each search. This is relatively
quick, since it involves two table-driven lookups (one in the MIDX's
revindex for `pack_pos_to_midx()`, and another in the MIDX's object
table for `nth_midxed_pack_int_id()`).
But since the preferred pack does not change after the MIDX is written,
it is safe to cache this value on the MIDX itself.
Write a helper to do just that, and rewrite all of the existing
call-sites that care about the identity of the preferred pack in terms
of this new helper.
This will prepare us for a subsequent patch where we will need to binary
search through the MIDX's pseudo-pack order multiple times.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a multi-pack bitmap is used to implement verbatim pack reuse (that
is, when verbatim chunks from an on-disk packfile are copied
directly[^1]), it does so by using its "preferred pack" as the source
for pack-reuse.
This allows repositories to pack the majority of their objects into a
single (often large) pack, and then use it as the single source for
verbatim pack reuse. This increases the amount of objects that are
reused verbatim (and consequently, decrease the amount of time it takes
to generate many packs). But this performance comes at a cost, which is
that the preferred packfile must pace its growth with that of the entire
repository in order to maintain the utility of verbatim pack reuse.
As repositories grow beyond what we can reasonably store in a single
packfile, the utility of verbatim pack reuse diminishes. Or, at the very
least, it becomes increasingly more expensive to maintain as the pack
grows larger and larger.
It would be beneficial to be able to perform this same optimization over
multiple packs, provided some modest constraints (most importantly, that
the set of packs eligible for verbatim reuse are disjoint with respect
to the subset of their objects being sent).
If we assume that the packs which we treat as candidates for verbatim
reuse are disjoint with respect to any of their objects we may output,
we need to make only modest modifications to the verbatim pack-reuse
code itself. Most notably, we need to remove the assumption that the
bits in the reachability bitmap corresponding to objects from the single
reuse pack begin at the first bit position.
Future patches will unwind these assumptions and reimplement their
existing functionality as special cases of the more general assumptions
(e.g. that reuse bits can start anywhere within the bitset, but happen
to start at 0 for all existing cases).
This patch does not yet relax any of those assumptions. Instead, it
implements a foundational data-structure, the "Bitampped Packs" (`BTMP`)
chunk of the multi-pack index. The `BTMP` chunk's contents are described
in detail here. Importantly, the `BTMP` chunk contains information to
map regions of a multi-pack index's reachability bitmap to the packs
whose objects they represent.
For now, this chunk is only written, not read (outside of the test-tool
used in this patch to test the new chunk's behavior). Future patches
will begin to make use of this new chunk.
[^1]: Modulo patching any `OFS_DELTA`'s that cross over a region of the
pack that wasn't used verbatim.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update ref-related tests.
* ps/ref-tests-update:
t: mark several tests that assume the files backend with REFFILES
t7900: assert the absence of refs via git-for-each-ref(1)
t7300: assert exact states of repo
t4207: delete replace references via git-update-ref(1)
t1450: convert tests to remove worktrees via git-worktree(1)
t: convert tests to not access reflog via the filesystem
t: convert tests to not access symrefs via the filesystem
t: convert tests to not write references via the filesystem
t: allow skipping expected object ID in `ref-store update-ref`
For now, this is just a rename from `t/helper/test-fast-rebase.c` into
`builtin/replay.c` with minimal changes to make it build appropriately.
Let's add a stub documentation and a stub test script though.
Subsequent commits will flesh out the capabilities of the new command
and make it a more standard regular builtin.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the time t6429 was written, merge-ort was still under development,
did not have quite as many tests, and certainly was not widely deployed.
Since t6429 was exercising some codepaths just a little differently, we
thought having them also test the "merge_switch_to_result()" bits of
merge-ort was useful even though they weren't intrinsic to the real
point of these tests.
However, the value provided by doing extra testing of the
"merge_switch_to_result()" bits has decreased a bit over time, and it's
actively making it harder to refactor `test-tool fast-rebase` into `git
replay`, which we are going to do in following commits. Dispense with
these bits.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These sites offer https versions of their content.
Using the https versions provides some protection for users.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the added tests cases, skip testing the `GIT_TRACE2_REDACT=0` case
because we would need to exactly model the full JSON event stream like
we did in the preceding basic tests and I do not think it is worth it.
Furthermore, the Trace2 routines print the same content in normal, perf,
or event format, and in t0210 and t0211 we already tested the basic
functionality, so no need to repeat it here.
In this test, we use the test-helper to unit test each of the event
messages where URLs can appear and confirm that they are redacted in
each event.
Signed-off-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leakfix.
* ps/leakfixes:
setup: fix leaking repository format
setup: refactor `upgrade_repository_format()` to have common exit
shallow: fix memory leak when registering shallow roots
test-bloom: stop setting up Git directory twice
We're setting up the Git directory twice in the `test-tool bloom`
helper, once at the beginning of `cmd_bloom()` and once in the local
subcommand implementation `get_bloom_filter_for_commit()`. This can lead
to memory leaks as we'll overwrite variables of `the_repository` with
newly allocated data structures. On top of that it's simply unnecessary.
Fix this by only setting up the Git directory once.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We require the caller to pass both the old and new expected object ID to
our `test-tool ref-store update-ref` helper. When trying to update a
symbolic reference though it's impossible to specify the expected object
ID, which means that the test would instead have to force-update the
reference. This is currently impossible though.
Update the helper to optionally skip verification of the old object ID
in case the test passes in an empty old object ID as input.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only a single PARSE_OPT_CMDMODE option can be specified for the same
variable at the same time. This is enforced by get_value(), but the
error messages are imprecise in three ways:
1. If a non-PARSE_OPT_CMDMODE option changes the value variable of a
PARSE_OPT_CMDMODE option then an ominously vague message is shown:
$ t/helper/test-tool parse-options --set23 --mode1
error: option `mode1' : incompatible with something else
Worse: If the order of options is reversed then no error is reported at
all:
$ t/helper/test-tool parse-options --mode1 --set23
boolean: 0
integer: 23
magnitude: 0
timestamp: 0
string: (not set)
abbrev: 7
verbose: -1
quiet: 0
dry run: no
file: (not set)
Fortunately this can currently only happen in the test helper; actual
Git commands don't share the same variable for the value of options with
and without the flag PARSE_OPT_CMDMODE.
2. If there are multiple options with the same value (synonyms), then
the one that is defined first is shown rather than the one actually
given on the command line, which is confusing:
$ git am --resolved --quit
error: option `quit' is incompatible with --continue
3. Arguments of PARSE_OPT_CMDMODE options are not handled by the
parse-option machinery. This is left to the callback function. We
currently only have a single affected option, --show-current-patch of
git am. Errors for it can show an argument that was not actually given
on the command line:
$ git am --show-current-patch --show-current-patch=diff
error: options '--show-current-patch=diff' and '--show-current-patch=raw' cannot be used together
The options --show-current-patch and --show-current-patch=raw are
synonyms, but the error accuses the user of input they did not actually
made. Or it can awkwardly print a NULL pointer:
$ git am --show-current-patch=diff --show-current-patch
error: options '--show-current-patch=(null)' and '--show-current-patch=diff' cannot be used together
The reasons for these shortcomings is that the current code checks
incompatibility only when encountering a PARSE_OPT_CMDMODE option at the
command line, and that it searches the previous incompatible option by
value.
Fix the first two points by checking all PARSE_OPT_CMDMODE variables
after parsing each option and by storing all relevant details if their
value changed. Do that whether or not the changing options has the flag
PARSE_OPT_CMDMODE set. Report an incompatibility only if two options
change the variable to different values and at least one of them is a
PARSE_OPT_CMDMODE option. This changes the output of the first three
examples above to:
$ t/helper/test-tool parse-options --set23 --mode1
error: --mode1 is incompatible with --set23
$ t/helper/test-tool parse-options --mode1 --set23
error: --set23 is incompatible with --mode1
$ git am --resolved --quit
error: --quit is incompatible with --resolved
Store the argument of PARSE_OPT_CMDMODE options of type OPTION_CALLBACK
as well to allow taking over the responsibility for compatibility
checking from the callback function. The next patch will use this
capability to fix the messages for git am --show-current-patch.
Use a linked list for storing the PARSE_OPT_CMDMODE variables. This
somewhat outdated data structure is simple and suffices, as the number
of elements per command is currently only zero or one. We do support
multiple different command modes variables per command, but I don't
expect that we'd ever use a significant number of them. Once we do we
can switch to a hashmap.
Since we no longer need to search the conflicting option, the all_opts
parameter of get_value() is no longer used. Remove it.
Extend the tests to check for both conflicting option names, but don't
insist on a particular order.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index file has room only for lower 32-bit of the file size in
the cached stat information, which means cached stat information
will have 0 in its sd_size member for a file whose size is multiple
of 4GiB. This is mistaken for a racily clean path. Avoid it by
storing a bogus sd_size value instead for such files.
* bc/racy-4gb-files:
Prevent git from rehashing 4GiB files
t: add a test helper to truncate files
In a future commit, we're going to work with some large files which will
be at least 4 GiB in size. To take advantage of the sparseness
functionality on most Unix systems and avoid running the system out of
disk, it would be convenient to use truncate(2) to simply create a
sparse file of sufficient size.
However, the GNU truncate(1) utility isn't portable, so let's write a
tiny test helper that does the work for us.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shuffle some bits across headers and sources to prepare for
libification effort.
* cw/prelim-cleanup:
parse: separate out parsing functions from config.h
config: correct bad boolean env value error message
wrapper: reduce scope of remove_or_warn()
hex-ll: separate out non-hash-algo functions
There's not currently any way to free the resources associated with a
decoration struct. As a result, we have several memory leaks which
cannot easily be plugged.
Let's add a "clear" function and make use of it in the example code of
t9004. This removes the only leak from that script, so we can mark it as
passing the leak sanitizer.
Curiously this leak is found only when running SANITIZE=leak with clang,
but not with gcc. But it is a bog-standard leak: we allocate some
memory in a local variable struct, and then exit main() without
releasing it. I'm not sure why gcc doesn't find it. After this
patch, both compilers report it as leak-free.
Note that the clear function takes a callback to free the individual
entries. That's not needed for our example (which is just decorating
with ints), but will be for real callers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now my strategy is simple. Create two identical repositories one
in each format. Use fixed timestamps. Verify the dynamically computed
compatibility objects from one repository match the objects stored in
the other repository.
A general limitation of this strategy is that the git when generating
signed tags and commits with compatObjectFormat enabled will generate
a signature for both formats. To overcome this limitation I have
added "test-tool delete-gpgsig" that when fed an signed commit or tag
with two signatures deletes one of the signatures.
With that in place I can have "git commit" and "git tag" generate
signed objects, have my tool delete one, and feed the new object
into "git hash-object" to create the kinds of commits and tags
git without compatObjectFormat enabled will generate.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a following commit, we will make it possible to separate objects in
different packfiles depending on a filter.
To make sure that the right objects are in the right packs, let's add a
new test-tool that can display which packfile(s) a given object is in.
Let's also make it possible to check if a given object is in the
expected number of packfiles with a `--check-count <n>` option.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The files config.{h,c} contain functions that have to do with parsing,
but not config.
In order to further reduce all-in-one headers, separate out functions in
config.c that do not operate on config into its own file, parse.h,
and update the include directives in the .c files that need only such
functions accordingly.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unused parameters in fsmonitor related code paths have been marked
as such.
* jk/fsmonitor-unused-parameter:
run-command: mark unused parameters in start_bg_wait callbacks
fsmonitor: mark unused hashmap callback parameters
fsmonitor/darwin: mark unused parameters in system callback
fsmonitor: mark unused parameters in stub functions
fsmonitor/win32: mark unused parameter in fsm_os__incompatible()
fsmonitor: mark some maybe-unused parameters
fsmonitor/win32: drop unused parameters
fsmonitor: prefer repo_git_path() to git_pathdup()
"git update-index" learns "--show-index-version" to inspect
the index format version used by the on-disk index file.
* jc/update-index-show-index-version:
test-tool: retire "index-version"
update-index: add --show-index-version
update-index doc: v4 is OK with JGit and libgit2
The start_bg_command() function takes a callback to tell when the
background-ed process is "ready". The callback receives the
child_process struct as well as an extra void pointer. But curiously,
neither of the two users of this interface look at either parameter!
This makes some sense. The only non-test user of the API is fsmonitor,
which uses fsmonitor_ipc__get_state() to connect to a single global
fsmonitor daemon (i.e., the one we just started!).
So we could just drop these parameters entirely. But it seems like a
pretty reasonable interface for the "wait" callback to have access to
the details of the spawned process, and to have room for passing extra
data through a void pointer. So let's leave these in place but mark the
unused ones so that -Wunused-parameter does not complain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano