"git pull --rebase=false" means we merge their history into ours, but
it has been described the other way around.
Cc: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: updated the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The doc for 'submodule.recurse' starts with "Specifies if commands
recurse into submodles by default". This is not exactly true of all
commands that have a '--recurse-submodules' option. For example, 'git
pull --recurse-submodules' does not run 'git pull' in each submodule,
but rather runs 'git submodule update --recursive' so that the submodule
working trees after the pull matches the commits recorded in the
superproject.
Clarify that by just saying that it enables '--recurse-submodules'.
Note that the way this setting interacts with 'fetch.recurseSubmodules'
and 'push.recurseSubmodules', which can have other values than true or
false, is already documented since 4da9e99e6e (doc: be more precise on
(fetch|push).recurseSubmodules, 2020-04-06).
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of the FILES section, we indicate that you can override the
regular lookup rules with --global, etc. But:
- we're missing the --local option
- we point to GIT_CONFIG instead of --file, but the latter has much
better documentation
- we're vague about how the overrides work; the actual option
descriptions are much better here
So let's just mention the names and point people back to the OPTIONS
section. We could perhaps even delete this paragraph entirely, but the
presence of the names may give people reading FILES a clue about where
to look for more information.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scope and utility of the GIT_CONFIG variable was drastically reduced
by dc87183189 (Only use GIT_CONFIG in "git config", not other programs,
2008-06-30). But the documentation in git-config(1) predates that, which
makes it rather misleading.
These days it is really just another way to say "--file". So let's say
that, and explicitly make it clear that it does not impact other Git
commands (like GIT_CONFIG_SYSTEM, etc, would).
I also bumped it to the bottom of the list of variables, and warned
people off of using it. We don't have any plans for deprecation at this
point, but there's little point in encouraging people to use it by
putting it at the top of the list.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The explanation for the --file option only refers to GIT_CONFIG. This
redirection to an environment variable is confusing, but doubly so
because the description of GIT_CONFIG is out of date.
Let's describe --file from scratch, detailing both the reading and
writing behavior as we do for other similar options like --system, etc.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Technical writing seeks to convey information with minimal
friction. One way that a reader can experience friction is if they
encounter a description of "a user" that is later simplified using a
gendered pronoun. If the reader does not consider that pronoun to
apply to them, then they can experience cognitive dissonance that
removes focus from the information.
Give some basic tips to guide us avoid unnecessary uses of gendered
description.
Using a gendered pronoun is appropriate when referring to a specific
person.
There are acceptable existing uses of gendered pronouns within the
Git codebase, such as:
* References to real people (e.g. Linus Torvalds, "the Git maintainer").
Do not misgender real people. If there is any doubt to the gender of a
person, then avoid using pronouns.
* References to fictional people with clear genders (e.g. Alice and
Bob).
* Sample text used in test cases (e.g t3702, t6432).
* The official text of the GPL license contains uses of "he or she",
but using singular "they" (or modifying the text in some other
way) is not within the scope of the Git project.
* Literal email messages in Documentation/howto/ should not be edited
for grammatical concerns such as this, unless we update the entire
document to fit the standard documentation format. If such an effort is
taken on, then the authorship would change and no longer refer to the
exact mail message.
* External projects consumed in contrib/ should not deviate solely for
style reasons. Recommended edits should be contributed to those
projects directly.
Other cases within the Git project were cleaned up by the previous
changes.
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were last bumped in commit 92c57e5c1d (bump rename limit
defaults (again), 2011-02-19), and were bumped both because processors
had gotten faster, and because people were getting ugly merges that
caused problems and reporting it to the mailing list (suggesting that
folks were willing to spend more time waiting).
Since that time:
* Linus has continued recommending kernel folks to set
diff.renameLimit=0 (maps to 32767, currently)
* Folks with repositories with lots of renames were happy to set
merge.renameLimit above 32767, once the code supported that, to
get correct cherry-picks
* Processors have gotten faster
* It has been discovered that the timing methodology used last time
probably used too large example files.
The last point is probably worth explaining a bit more:
* The "average" file size used appears to have been average blob size
in the linux kernel history at the time (probably v2.6.25 or
something close to it).
* Since bigger files are modified more frequently, such a computation
weights towards larger files.
* Larger files may be more likely to be modified over time, but are
not more likely to be renamed -- the mean and median blob size
within a tree are a bit higher than the mean and median of blob
sizes in the history leading up to that version for the linux
kernel.
* The mean blob size in v2.6.25 was half the average blob size in
history leading to that point
* The median blob size in v2.6.25 was about 40% of the mean blob size
in v2.6.25.
* Since the mean blob size is more than double the median blob size,
any file as big as the mean will not be compared to any files of
median size or less (because they'd be more than 50% dissimilar).
* Since it is the number of files compared that provides the O(n^2)
behavior, median-sized files should matter more than mean-sized
ones.
The combined effect of the above is that the file size used in past
calculations was likely about 5x too large. Combine that with a CPU
performance improvement of ~30%, and we can increase the limits by
a factor of sqrt(5/(1-.3)) = 2.67, while keeping the original stated
time limits.
Keeping the same approximate time limit probably makes sense for
diff.renameLimit (there is no progress feedback in e.g. git log -p),
but the experience above suggests merge.renameLimit could be extended
significantly. In fact, it probably would make sense to have an
unlimited default setting for merge.renameLimit, but that would
likely need to be coupled with changes to how progress is displayed.
(See https://lore.kernel.org/git/YOx+Ok%2FEYvLqRMzJ@coredump.intra.peff.net/
for details in that area.) For now, let's just bump the approximate
time limit from 10s to 1m.
(Note: We do not want to use actual time limits, because getting results
that depend on how loaded your system is that day feels bad, and because
we don't discover that we won't get all the renames until after we've
put in a lot of work rather than just upfront telling the user there are
too many files involved.)
Using the original time limit of 2s for diff.renameLimit, and bumping
merge.renameLimit from 10s to 60s, I found the following timings using
the simple script at the end of this commit message (on an AWS c5.xlarge
which reports as "Intel(R) Xeon(R) Platinum 8124M CPU @ 3.00GHz"):
N Timing
1300 1.995s
7100 59.973s
So let's round down to nice even numbers and bump the limits from
400->1000, and from 1000->7000.
Here is the measure_rename_perf script (adapted from
https://lore.kernel.org/git/20080211113516.GB6344@coredump.intra.peff.net/
in particular to avoid triggering the linear handling from
basename-guided rename detection):
#!/bin/bash
n=$1; shift
rm -rf repo
mkdir repo && cd repo
git init -q -b main
mkdata() {
mkdir $1
for i in `seq 1 $2`; do
(sed "s/^/$i /" <../sample
echo tag: $1
) >$1/$i
done
}
mkdata initial $n
git add .
git commit -q -m initial
mkdata new $n
git add .
cd new
for i in *; do git mv $i $i.renamed; done
cd ..
git rm -q -rf initial
git commit -q -m new
time git diff-tree -M -l0 --summary HEAD^ HEAD
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 89973554b5 (diffcore-rename: make diff-tree -l0 mean
-l<large>, 2017-11-29), -l0 was given a special magical "large" value,
but one which was not large enough for some uses (as can be seen from
commit 9f7e4bfa3b (diff: remove silent clamp of renameLimit,
2017-11-13). Make 0 (or a negative value) be treated as unlimited
instead and update the documentation to mention this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few places in the docs implied that rename/copy detection is always
quadratic or that all (unpaired) files were involved in the quadratic
portion of rename/copy detection. The following two commits each
introduced an exception to this:
9027f53cb5 (Do linear-time/space rename logic for exact renames,
2007-10-25)
bd24aa2f97 (diffcore-rename: guide inexact rename detection based
on basenames, 2021-02-14)
(As a side note, for copy detection, the basename guided inexact rename
detection is turned off and the exact renames will only result in
sources (without the dests) being removed from the set of files used in
quadratic detection. So, for copy detection, the documentation was
closer to correct.)
Avoid implying that all files involved in rename/copy detection are
subject to the full quadratic algorithm. While at it, also note the
default values for all these settings.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default reason stored in the lock file, "added with --lock",
is unlikely to be what the user would have given in a separate
`git worktree lock` command. Allowing `--reason` to be specified
along with `--lock` when adding a working tree gives the user control
over the reason for locking without needing a second command.
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git diff --merge-base` was introduced at around Git 2.30, the
documentation included a few errors.
In the example given for `git diff --cached --merge-base`, the
`--cached` flag was omitted for the `--merge-base` example. Add the
missing flag.
In the `git diff <commit>` case, we failed to mention that
`--merge-base` is an available option. Give the usage of `--merge-base`
as an option there.
Finally, there are two errors in the usage of `git diff`. Firstly, we do
not mention `--merge-base` in the `git diff --cached` case. Mention it
so that it's consistent with the documentation. Secondly, we put the
`[--merge-base]` in between `<commit>` and `[<commit>...]`. Move the
`[--merge-base]` so that it's beside `[<options>]` which is a more
logical grouping.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, we encourage users to use plumbing commands, like git
rev-list, over porcelain commands, like git log, when scripting.
However, git rev-list has one glaring problem that prevents it from
being used in certain cases: when --pretty is used with a custom format,
it always prints out a line containing "commit" and the object ID. This
makes it unsuitable for many scripting needs, and forces users to use
git log instead.
While we can't change this behavior for backwards compatibility, we can
add an option to suppress this behavior, so let's do so, and call it
"--no-commit-header". Additionally, add the corresponding positive
option to switch it back on.
Note that this option doesn't affect the built-in formats, only custom
formats. This is exactly the same behavior as users already have from
git log and is what most users will be used to.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation reads as if .gitignore files will be parsed in
every parent directory, and not until they reach a repository boundary.
This clarifies the current behaviour.
As well, this corrects 'toplevel' to 'top-level', matching usage for
'top-level domain'.
Signed-off-by: Andrew Berry <andrew@furrypaws.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no documentation for the --negotiate-only option added in
9c1e657a8f (fetch: teach independent negotiation (no packfile),
2021-05-04), only documentation for the related push.negotiation
option added in the following commit in 477673d6f3 (send-pack:
support push negotiation, 2021-05-04).
Let's document it, and update the cross-linking I'd added between
--negotiation-tip=* and 'fetch.negotiationAlgorithm' in
526608284a (fetch doc: cross-link two new negotiation options,
2018-08-01).
I think it would be better to say "in common with the remote" here
than "...the server", but the documentation for --negotiation-tip=*
above this talks about "the server", so let's continue doing that in
this related option. See 3390e42adb (fetch-pack: support negotiation
tip whitelist, 2018-07-02) for that documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typofix (chose -> choose) in the documentation of the patch option
under the commit command.
Signed-off-by: Beshr Kayali <me@beshr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As can be seen in files "Documentation/blame-options.txt" and
"builtin/blame.c", the name of this configuration option is
"blame.markUnblamableLines".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using gendered pronouns for an anonymous person applies a gender where
none is known and further excludes readers who do not use gendered
pronouns. Avoid such examples in the documentation by using "they" or
passive voice to avoid the need for a pronoun.
Inspired-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos in documentation, code comments, and RelNotes which repeat
various words. In trivial cases, just delete the duplicated word and
rewrap text, if needed. Reword the affected sentence in
Documentation/RelNotes/1.8.4.txt for it to make sense.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many of the regulars on #git-devel are now on Libera Chat, to the extent
that the community page now lists it as the IRC Channel[1]. This will
help new contributors find the right place, if they choose to ask
questions on `#git-devel`.
Relevant discussion on the IRC transition:
https://lore.kernel.org/git/CAJoAoZ=e62sceNpcR5L5zjsj177uczTnXjcAg+BbOoOkeH8vXQ@mail.gmail.com/
[1] https://git-scm.com/community
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is almost never a good idea, as the resulting repository is
larger and slower (see the new explanations in the docs).
I outlined the potential problems. We could go further and make the
option harder to find (or at least, make the command-line option
descriptions a much more terse "you probably don't want this; see
pack.packsizeLimit for details"). But this seems like a minimal change
that may prevent people from thinking it's more useful than it is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a01f7f2ba0 (merge: enable defaulttoupstream by default,
2014-04-20) forgot to mention the new default in the configuration
documentation.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There're two different default options for log --decorate:
* Should `--decorate` be given without any arguments, it's default to
`short`
* Should neither `--decorate` nor `--no-decorate` be given, it's default
to the `log.decorate` or `auto`.
We documented the former, but not the latter.
Let's document them, too.
Reported-by: Andy AO <zen96285@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 87db61a (trace2: write discard message to sentinel files,
2019-10-04), we added a new "too_many_files" event for when trace2
logging would create too many files in an output directory.
Unfortunately, the api-trace2 doc described a "discard" event instead.
Fix the doc to use the correct event name.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-repack doc clearly states that it *does* operate on promisor
packfiles (in a separate partition), with "-a" specified. Presumably
the statements here are outdated, as they feature from the first doc
in 2017 (and the repack support was added in 2018)
Signed-off-by: Tao Klerks <tao@klerks.biz>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the code has been simplified and it's clear what it's
actually doing, update the documentation to reflect that.
Namely; the simple mode only barfs when working on a centralized
workflow, and there's no configured upstream branch with the same name.
Cc: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the already dead code to support "sendemail.smtpssl" by finally
removing the dead code supporting the configuration option.
In f6bebd121a (git-send-email: add support for TLS via
Net::SMTP::SSL, 2008-06-25) the --smtp-ssl command-line option was
documented as deprecated, later in 65180c6618 (List send-email config
options in config.txt., 2009-07-22) the "sendemail.smtpssl"
configuration option was also documented as such.
Then in in 3ff15040e2 (send-email: fix regression in
sendemail.identity parsing, 2019-05-17) I unintentionally removed
support for it by introducing a bug in read_config().
As can be seen from the diff context we've already returned unless
$enc i defined, so it's not possible for us to reach the "elsif"
branch here. This code was therefore already dead since Git v2.23.0.
So let's just remove it. We were already 11 years into a stated
deprecation period of this variable when 3ff15040e2 landed, now it's
around 13. Since it hasn't worked anyway for around 2 years it looks
like we can safely remove it.
The --smtp-ssl option is still deprecated, if someone cares they can
follow-up and remove that too, but unlike the config option that one
could still be in use in the wild. I'm just removing this code that's
provably unused already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the 'uploadpack.blobPackfileUri' description in packfile-uri.txt
and the correct format also can be seen in t5702.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently GNU make already removes files when catching an interruption
signal, however, in order to deal with other kinds of errors a
workaround is in place to store target output to a temporary file, and
only move it to its right place on success.
By enabling the built-in .DELETE_ON_ERROR we let make do this task, so
we don't have to.
This way the rules can be simplified a lot.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits 50cff52f1a (When generating manpages, delete outdated targets
first., 2007-08-02) and f9286765b2 (Documentation/Makefile: remove
cmd-list.made before redirecting to it., 2007-08-06) created these rm
instances for a very rare corner-case: building as root by mistake.
It's odd to have workarounds here, but nowhere else in the Makefile--
which already fails in this stuation, starting from
Documentation/technical/.
We gain nothing but complexity, so let's remove them.
Comments-by: Jeff King <peff@peff.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
asciidoc needs asciidoc.conf, asciidoctor asciidoctor-extensions.rb.
Neither needs the other.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If options pertaining to how the diff is displayed is provided to
`git stash show`, the command will ignore the stash.showIncludeUntracked
configuration variable, defaulting to not showing any untracked files.
This is unintuitive behaviour since the format of the diff output and
whether or not to display untracked files are orthogonal.
Use stash.showIncludeUntracked even when diff options are given. Of
course, this is still overridable via the command-line options.
Update the documentation to explicitly say which configuration variables
will be overridden when a diff options are given.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix long standing inconsistency between -c/--cc that do imply -p on
one side, and -m that did not imply -p on the other side.
Change corresponding test accordingly, as "log -m" output should now
match one from "log -m -p", rather than from just "log".
Change documentation accordingly.
NOTES:
After this patch
git log -m
produces diffs without need to provide -p as well, that improves both
consistency and usability. It gets even more useful if one sets
"log.diffMerges" configuration variable to "first-parent" to force -m
produce usual diff with respect to first parent only.
This patch, however, does not change behavior when specific diff
format is explicitly provided on the command-line, so that commands
like
git log -m --raw
git log -m --stat
are not affected, nor does it change commands where specific diff
format is active by default, such as:
git diff-tree -m
It's also worth to be noticed that exact historical semantics of -m is
still provided by --diff-merges=separate.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will soon be adding an optimization that caches (in memory only,
never written to disk) upstream renames during a sequence of merges such
as occurs during a cherry-pick or rebase operation. Add several tests
meant to stress such an implementation to ensure it does the right
thing, and include a test whose outcome we will later change due to this
optimization as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remembering renames on the upstream side of history in an early merge of
a rebase or cherry-pick for re-use in a latter merge of the same
operation makes pretty good intuitive sense. However, trying to show
that it doesn't cause some subtle behavioral difference or some funny
edge or corner case is much more involved. And, in fact, it does
introduce a subtle behavioral change.
Document all the assumptions, special cases, and logic involved in such
an optimization, and describe why this optimization is safe under the
current optimizations/features/etc. -- even when the subtle behavioral
change is triggered.
Part of the point of adding this document that goes over the
optimization in such laborious detail, is that it is possible that
significant future changes (optimizations or feature changes) could
interact with this optimization in interesting ways; this document is
here to help folks making big changes sanity check that the assumptions
and arguments underlying this optimization are still valid. (As a side
note, creating this document forced me to review things in sufficient
detail that I found I was not properly caching directory-rename-induced
renames, resulting in the code not being aware of those renames and
causing unnecessary diffcore_rename_extended() calls in subsequent
merges.)
A subsequent commit will add several testcases based on this document
meant to stress-test the implementation and also document the case with
the subtle behavioral change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation for color.pager is technically correct, but
slightly misleading and doesn't really clarify the purpose of the
variable. As explained in the original thread which added it:
https://lore.kernel.org/git/E1G6zPH-00062L-Je@moooo.ath.cx/
the point is to deal with pagers that don't understand colors. And hence it
being set to "true" is necessary for colorizing output to the pager, but
not sufficient by itself (you must also have enabled one of the other
color options, though note that these are set to "auto" by default these
days).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text was somewhat confusing between the revision itself and the author.
Signed-off-by: Reuven Yagel <robi@post.jce.ac.il>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano