Built-in commands can specify names for option arguments when usage text
is generated for a command. sh based commands should be able to do the
same.
Option argument name hint is any text that comes after [*=?!] after the
argument name up to the first whitespace.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hasn't been true since 2556b996 (status: disable display of '#'
comment prefix by default, 2013-09-06).
Signed-off-by: Dirk Wallenstein <halsmit@t-online.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This configuration variable sets the default for the --full-name option.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
User config file location complies with the XDG base directory
specification while supporting the traditional $HOME/.gitk as a
fallback.
Signed-off-by: Astril Hayato <astrilhayato@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The version numbering scheme has changed since Git 1.9 and we
dropped the third dewey-decimal from the traditional numbering
(e.g. both 1.8.4 and 1.8.5 were major feature releases). This
release 1.9.1 is the first maintenance relase for Git 1.9.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace git-pull and git-merge with the corresponding un-hyphenated
versions. While at it, use ` to mark it up instead of '.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original description talked only about what it does. Instead,
start it with the purpose of the command, i.e. what it is used for,
and then mention what it does to achieve that goal.
Clarify what <start>, <url> and <end> means in the context of the
overall purpose of the command.
Describe the extended syntax of <end> parameter that is used when
the local branch name is different from the branch name at the
repository the changes are published.
Helped-by: Eric Sunshine
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --patch-format option has been supported for a while but it is not
mentioned in the man page and the short help cannot tell the user what
the supported formats are. Add the option to the man page along with the
supported options.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before cdab485 (upload-pack: delegate rev walking in shallow fetch to
pack-objects - 2013-08-16) upload-pack does not write to the source
repository. cdab485 starts to write $GIT_DIR/shallow_XXXXXX if it's a
shallow fetch, so the source repo must be writable.
git:// servers do not need write access to repos and usually don't
have it, which means cdab485 breaks shallow clone over git://
Instead of using a temporary file as the media for shallow points, we
can send them over stdin to pack-objects as well. Prepend shallow
SHA-1 with --shallow so pack-objects knows what is what.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most distributions don't require Term::ReadKey as dependency, leaving
the user to wonder why the setting doesn't work.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-repack command always passes `--honor-pack-keep`
to pack-objects. This has traditionally been a good thing,
as we do not want to duplicate those objects in a new pack,
and we are not going to delete the old pack.
However, when bitmaps are in use, it is important for a full
repack to include all reachable objects, even if they may be
duplicated in a .keep pack. Otherwise, we cannot generate
the bitmaps, as the on-disk format requires the set of
objects in the pack to be fully closed.
Even if the repository does not generally have .keep files,
a simultaneous push could cause a race condition in which a
.keep file exists at the moment of a repack. The repack may
try to include those objects in one of two situations:
1. The pushed .keep pack contains objects that were
already in the repository (e.g., blobs due to a revert of
an old commit).
2. Receive-pack updates the refs, making the objects
reachable, but before it removes the .keep file, the
repack runs.
In either case, we may prefer to duplicate some objects in
the new, full pack, and let the next repack (after the .keep
file is cleaned up) take care of removing them.
This patch introduces both a command-line and config option
to disable the `--honor-pack-keep` option. By default, it
is triggered when pack.writeBitmaps (or `--write-bitmap-index`
is turned on), but specifying it explicitly can override the
behavior (e.g., in cases where you prefer .keep files to
bitmaps, but only when they are present).
Note that this option just disables the pack-objects
behavior. We still leave packs with a .keep in place, as we
do not necessarily know that we have duplicated all of their
objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 322bb6e12f (add update 'none' flag to disable update of submodule
by default) added the '--checkout' option to "git submodule update" but
forgot to explicitly document it in synopsis, usage string and man page
(It is only mentioned implicitly in the man page). In 23d25e48 (submodule:
explicit local branch creation in module_clone) the synopsis of the man
page was updated, but the "OPTIONS" section of the man page and the usage
string of the git-submodule script still do not mention the '--checkout'
option.
Fix that by documenting this option in usage string and the "OPTIONS"
section of man page too. While at it group the update-mode options into
a single set in the usage string.
Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are fairly consistent about these, so most are covered by
"follow existing style", but it doesn't hurt to be explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit ee27ca4, we started restricting remote git-archive
invocations to only accessing reachable commits. This
matches what upload-pack allows, but does restrict some
useful cases (e.g., HEAD:foo). We loosened this in 0f544ee,
which allows `foo:bar` as long as `foo` is a ref tip.
However, that still doesn't allow many useful things, like:
1. Commits accessible from a ref, like `foo^:bar`, which
are reachable
2. Arbitrary sha1s, even if they are reachable.
We can do a full object-reachability check for these cases,
but it can be quite expensive if the client has sent us the
sha1 of a tree; we have to visit every sub-tree of every
commit in the worst case.
Let's instead give site admins an escape hatch, in case they
prefer the more liberal behavior. For many sites, the full
object database is public anyway (e.g., if you allow dumb
walker access), or the site admin may simply decide the
security/convenience tradeoff is not worth it.
This patch adds a new config option to disable the
restrictions added in ee27ca4. It defaults to off, meaning
there is no change in behavior by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits ee27ca4 and 0f544ee introduced rules by which
git-upload-archive would restrict clients from accessing
unreachable objects. However, we never documented those
rules anywhere, nor their reason for being. Let's do so now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--sort=version:refname (or --sort=v:refname for short) sorts tags as
if they are versions. --sort=-refname reverses the order (with or
without ":version").
versioncmp() is copied from string/strverscmp.c in glibc commit
ee9247c38a8def24a59eb5cfb7196a98bef8cfdc, reformatted to Git coding
style. The implementation is under LGPL-2.1 and according to [1] I can
relicense it to GPLv2.
[1] http://www.gnu.org/licenses/gpl-faq.html#AllCompatibility
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1a72cfd (commit -v: strip diffs and submodule shortlogs from the
commit message - 2013-12-05) we have a less fragile way to cut out
"git status" at the end of a commit message but it's only enabled for
stripping submodule shortlogs.
Add new cleanup option that reuses the same mechanism for the entire
"git status" without accidentally removing lines starting with '#'.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document how to override commit.gpgsign configuration that is set to
true per "git commit" invocation (parse-options machinery lets us
say "--no-gpg-sign" to do so).
"git commit-tree" does not use parse-options, so manually add the
corresponding option for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you want to GPG sign all your commits, you have to add the -S option
all the time. The commit.gpgsign config option allows to sign all
commits automatically.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that there is no implicit floating going on; --remote
lets you explicitly integrate the upstream branch in your current
HEAD (just like running 'git pull' in the submodule). The only
distinction with the current 'git pull' is the config location and
setting used for the upstream branch, which is hopefully clear now.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous code only checked out branches in cmd_add. This commit
moves the branch-checkout logic into module_clone, where it can be
shared by cmd_add and cmd_update. I also update the initial checkout
command to use 'reset' to preserve branches setup during module_clone.
With this change, folks cloning submodules for the first time via:
$ git submodule update ...
will get a local branch instead of a detached HEAD, unless they are
using the default checkout-mode updates. This is a change from the
previous situation where cmd_update always used checkout-mode logic
(regardless of the requested update mode) for updates that triggered
an initial clone, which always resulted in a detached HEAD.
This commit does not change the logic for updates after the initial
clone, which will continue to create detached HEADs for checkout-mode
updates, and integrate remote work with the local HEAD (detached or
not) in other modes.
The motivation for the change is that developers doing local work
inside the submodule are likely to select a non-checkout-mode for
updates so their local work is integrated with upstream work.
Developers who are not doing local submodule work stick with
checkout-mode updates so any apparently local work is blown away
during updates. For example, if upstream rolls back the remote branch
or gitlinked commit to an earlier version, the checkout-mode developer
wants their old submodule checkout to be rolled back as well, instead
of getting a no-op merge/rebase with the rolled-back reference.
By using the update mode to distinguish submodule developers from
black-box submodule consumers, we can setup local branches for the
developers who will want local branches, and stick with detached HEADs
for the developers that don't care.
Testing
=======
In t7406, just-cloned checkouts now update to the gitlinked hash with
'reset', to preserve the local branch for situations where we're not
on a detached HEAD.
I also added explicit tests to t7406 for HEAD attachement after
cloning updates, showing that it depends on their update mode:
* Checkout-mode updates get detached HEADs
* Everyone else gets a local branch, matching the configured
submodule.<name>.branch and defaulting to master.
The 'initial-setup' tag makes it easy to reset the superproject to a
known state, as several earlier tests commit to submodules and commit
the changed gitlinks to the superproject, but don't push the new
submodule commits to the upstream subprojects. This makes it
impossible to checkout the current super master, because it references
submodule commits that don't exist in the upstream subprojects. For a
specific example, see the tests that currently generate the
'two_new_submodule_commits' commits.
Documentation
=============
I updated the docs to describe the 'submodule update' modes in detail.
The old documentation did not distinguish between cloning and
non-cloning updates and lacked clarity on which operations would lead
to detached HEADs, and which would not. The new documentation
addresses these issues while updating the docs to reflect the changes
introduced by this commit's explicit local branch creation in
module_clone.
I also add '--checkout' to the usage summary and group the update-mode
options into a single set.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a config variable that allows setting the default index version when
initializing a new index file. Similar to the GIT_INDEX_VERSION
environment variable this only affects new index files.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not obvious when looking at a new command what hooks will affect
it. Add a HOOKS section to the git-am(1) page, imitating
git-commit(1), to make it easier for people to discover e.g. the
applypatch-msg hook that can implement a custom subject-mangling
strategy (e.g., removing a "bug #nnnn:" prefix introduced by a bug
tracker).
Reported-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Respect a GIT_INDEX_VERSION environment variable, when a new index is
initialized. Setting the environment variable will not cause existing
index files to be converted to another format, but will only affect
newly written index files. This can be used to initialize repositories
with index-v4.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document --keep-index's short form -k in both main synopsis and
the save synopsis in the Options section.
Signed-off-by: John Marshall <jm18@sanger.ac.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turns out that putting 'link:' before the 'http' is actually superfluous
in AsciiDoc, as there's already a predefined macro to handle it.
"http, https, [etc] URLs are rendered using predefined inline macros."
http://www.methods.co.nz/asciidoc/userguide.html#_urls
"Hypertext links to files on the local file system are specified
using the link inline macro."
http://www.methods.co.nz/asciidoc/userguide.html#_linking_to_local_documents
Despite being superfluous, the reference implementation of AsciiDoc
tolerates the extra 'link:' and silently removes it, giving a functioning
link in the generated HTML. However, AsciiDoctor (the Ruby implementation
of AsciiDoc used to render the http://git-scm.com/ site) does /not/ have
this behaviour, and so generates broken links, as can be seen here:
http://git-scm.com/docs/git-cvsimport (links to cvs2git & parsecvs)
http://git-scm.com/docs/git-filter-branch (link to The BFG)
It's worth noting that after this change, the html generated by 'make html'
in the git project is identical, and all links still work.
Signed-off-by: Roberto Tyley <roberto.tyley@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We state that the following paragraph mentions the pickaxe
interface, but the term pickaxe is not then used. This
change clarifies that the example command uses the pickaxe
interface and what it is searching for.
Signed-off-by: Albert L. Lash, IV <alash3@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current text claims optimization, implying the use of
hardlinks, when this option ratchets down the level of
efficiency. This change explains the difference made by
using this option, namely copying instead of hardlinking,
and why it may be useful.
Signed-off-by: Albert L. Lash, IV <alash3@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All other man files have capitalized descriptions which
immediately follow the command's name. Let's capitalize
this one too for consistency.
Signed-off-by: Albert L. Lash, IV <alash3@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The term mismerges without hyphen is used a few other
places in the documentation. Let's update this to
be consistent.
Signed-off-by: Albert L. Lash, IV <alash3@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`gc --auto` takes time and can block the user temporarily (but not any
less annoyingly). Make it run in background on systems that support
it. The only thing lost with running in background is printouts. But
gc output is not really interesting. You can keep it in foreground by
changing gc.autodetach.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
See 3e63b21 (upload-pack: Implement no-done capability - 2011-03-14)
and 761ecf0 (fetch-pack: Implement no-done capability - 2011-03-14)
for more information.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-protocol.txt explains in detail how multi_ack_detailed works and
what's the difference between no multi_ack, multi_ack and
multi_ack_detailed. No need to repeat here.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's introduced in 1bd8c8f (git-upload-pack: Support the multi_ack
protocol - 2005-10-28) but probably better documented in the commit
message of 78affc4 (Add multi_ack_detailed capability to
fetch-pack/upload-pack - 2009-10-30).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --mixed is used, entries could be removed from index if the
target ref does not have them. When "reset" is used in preparation for
commit spliting (in a dirty worktree), it could be hard to track what
files to be added back. The new option --intent-to-add simplifies it
by marking all removed files intent-to-add.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
We wanted to call the upcoming release "Git 1.9", with its
maintenance track being "Git 1.9.1", "Git 1.9.2", etc., but various
third-party tools are reported to assume that there are at least
three dewey-decimal components in our version number.
Adjust the plan so that vX.Y.0 are feature releases while vX.Y.Z
(Z > 0) are maintenance releases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ilya Bobyr