kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Junio C Hamano	3af828634f	tests: do not use implicit "git diff --no-index" As a general principle, we should not use "git diff" to validate the results of what git command that is being tested has done. We would not know if we are testing the command in question, or locating a bug in the cute hack of "git diff --no-index". Rather use test_cmp for that purpose. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Bryan Donlan	0e46e70462	Don't use the 'export NAME=value' in the test scripts. This form is not portable across all shells, so replace instances of: export FOO=bar with: FOO=bar export FOO Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Sixt	64fb19ba63	t7004-tag: Skip more tests if gpg is not available. This test was already careful enough to skip signed tag tests if gpg is not available, but it must also skip all verify tests, even those that are about non-signed tags, because they also invoke gpg. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	41ac414ea2	Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test should succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Pierre Habouzit	c43a24834a	Force the sticked form for options with optional arguments. This forbids "git tag -n <number> -l" we allowed earlier, so adjust t7004 while at it. Signed-off-by: Pierre Habouzit <madcoder@debian.org>	17 years ago
Pierre Habouzit	78d776a969	git-tag: fix -l switch handling regression. The command itself takes an optional <pattern> argument that limits the shown tags to the ones that match when in listing mode that is triggered with '-l' option. The <pattern> is not an optional option-argument to '-l'. With this fix, "git tag -l -n 4 v0.99" works as expected. It also removes a few bogus tests in t7004. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Linus Torvalds	be15f50538	"git tag -u keyname" broken Commit `3968658599` broke signed tags using the "-u" flag when it made builtin-tag.c use parse_options() to parse its arguments (but it quite possibly was broken even before that, by the builtin rewrite). It used to be that passing the signing ID with the -u parameter also (obviously!) implied that you wanted to sign and annotate the tag, but that logic got dropped. It also totally ignored the actual key ID that was passed in. This reinstates it all. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jeff King	10507857fe	git-tag: test that -s implies an annotated tag This detects a regression introduced while moving git-tag to a C builtin. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Carlos Rica	3968658599	Make builtin-tag.c use parse_options. Also, this removes those tests ensuring that repeated -m options don't allocate memory more than once, because now this is done after parsing options, using the last one when more are given. The same for -F. Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Mike Hommey	eb9d2b91cf	Fix and improve t7004 (git-tag tests) Brown paper bag fix to avoid using non portable sed syntax. The test by itself didn't catch what it was supposed to, anyways. The new test first checks if git-tag correctly errors out when the user exited the editor without editing the file. Then it checks if what the user was presented in the editor was any useful, which we define as the following: * It begins with a single blank line, where the invoked editor would typically place the editing curser at, so that the user can immediately start typing; * It has some instruction but that comes after that initial blank line, all lines prefixed with "#". We specifically do not check for the wording of this instruction. * And it has nothing else, as the expected behaviour is "Hey you did not leave any message". Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Mike Hommey	4d8b1dc850	Add tests for git tag These tests check whether git-tag properly sends a comment into the editor, and whether it reuses previous annotation when overwriting an existing tag. Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Carlos Rica	aba91192ae	git-tag -s must fail if gpg cannot sign the tag. Most of this patch code and message was written by Shawn O. Pearce. I made some tests to know what the problem was, and then I changed the code related with the SIGPIPE signal. If the user has misconfigured `user.signingkey` in their .git/config or just doesn't have any secret keys on their keyring and they ask for a signed tag with `git tag -s` we better make sure the resulting tag was actually signed by gpg. Prior versions of builtin git-tag allowed this failure to slip by without error as they were not checking the return value of the finish_command() so they did not notice when gpg exited with an error exit status. They also did not fail if gpg produced an empty output or if read_in_full received an error from the read system call while trying to read the pipe back from gpg. Finally, we did not actually honor any return value from the do_sign function as it returns ssize_t but was being stored into an unsigned long. This caused the compiler to optimize out the die condition, allowing git-tag to continue along and create the tag object. However, when gpg gets a wrong username, it exits before any read was done and then the writing process receives SIGPIPE and program is terminated. By ignoring this signal, anyway, the function write_or_die gets EPIPE from write_in_full and exits returning 0 to the system without a message. Here we better call to write_in_full directly so we can fail printing a message and return safely to the caller. With these issues fixed `git-tag -s` will now fail to create the tag and will report a non-zero exit status to its caller, thereby allowing automated helper scripts to detect (and recover from) failure if gpg is not working properly. Proposed-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Carlos Rica	18e32b5b7a	git-tag: Fix -l option to use better shell style globs. This patch removes certain behaviour of "git tag -l foo", currently listing every tag name having "foo" as a substring. The same thing now could be achieved doing "git tag -l 'foo'". This feature was added recently when git-tag.sh got the -n option for showing tag annotations, because that commit also replaced the old "grep pattern" behaviour with a more preferable "shell pattern" behaviour (although slightly modified as you can see). Thus, the following builtin-tag.c implemented it in order to ensure that tests were passing unchanged with both programs. Since common "shell patterns" match names with a given substring _only_ when * is inserted before and after (as in "substring"), and the "plain" behaviour cannot be achieved easily with the current implementation, this is mostly the right thing to do, in order to make it more flexible and consistent. Tests for "git tag" were also changed to reflect this. Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Carlos Rica	e317cfafd2	builtin-tag.c: Fix two memory leaks and minor notation changes. A repeated call to read_sha1_file was not freing memory when the buffer was allocated but returned size was zero. Also, now the program does not allow many -F or -m options, which was a bug too because it was not freing the memory allocated for any previous -F or -m options. Tests are provided for ensuring that only one option -F or -m is given. Also, another test is shipped here, to check that "git tag" fails when a non-existing file is passed to the -F option, something that git-tag.sh allowed creating the tag with an empty message. Signed-off-by: Carlos Rica <jasampler@gmail.com> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Carlos Rica	62e09ce998	Make git tag a builtin. This replaces the script "git-tag.sh" with "builtin-tag.c". The existing test suite for "git tag" guarantees the compatibility with the features provided by the script version. There are some minor changes in the behaviour of "git tag" here: "git tag -v" now can get more than one tag to verify, like "git tag -d" does, "git tag" with no arguments prints all tags, more like "git branch" does, and "git tag -n" also prints all tags with annotations (without needing -l). Tests and documentation were also updated to reflect these changes. The program is currently calling the script "git verify-tag" for verify. This can be changed porting it to C and calling its functions directly from builtin-tag.c. Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Carlos Rica	5206d13091	t7004: Add tests for the git tag -n option. These tests check the syntax for the git tag -n option and its output when one, none or many lines of the message are requested. Also this commit adds a missing && in the test that checks the sorted output of git tag -l. Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Carlos Rica	797e99a278	t7004: Skip tests for signed tags in an old version of gpg. As said here: http://www.gnupg.org/documentation/faqs.html#q6.19 the gpg version 1.0.6 didn't parse trust packets correctly, so for that version, creation of signed tags using the generated key fails. Signed-off-by: Carlos Rica <jasampler@gmail.com> Acked-by: Sven Verdoolaege <skimo@kotnet.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Junio C Hamano	5be60078c9	Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Carlos Rica	ef5a6fb597	Add test-script for git-tag These tests are useful to develop the C version for git-tag.sh, ensuring that the future builtin-tag.c will not break previous behaviour. The tests are focused on listing, verifying, deleting and creating tags, checking always that the correct status value is returned and everything remains as expected. In order to verify and create signed tags, a PGP key was also added, being created this way: gpg --homedir t/t7004 --gen-key Type DSA and Elgamal, size 2048 bits, no expiration date. Name and email: C O Mitter <committer@example.com> No password given, to enable non-interactive operation. Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago

19 Commits (7f8365f894d60f240edd356f32e3c1bda994ed41)