Run the pre-commit and post-commit hooks at appropriate places, and
display their output if any.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If a git-am or git-rebase is in progress, fill the commit log buffer
from the commit information found in the various files in the .dotest
directory.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also avoid inserting an extra newline if other signoff lines are
present.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add git-blame as a candidate to the byte-compilation.
batch-byte-compile is the prefered way to byte-compile files in
batch mode. Use it instead of the interactive function.
Signed-off-by: Xavier Maillard <zedek@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If not otherwise specified, take the default coding system for commits
from the 'i18n.commitencoding' repository configuration value.
Also set the buffer-file-coding-system variable in the log buffer to
make the selected coding system visible on the modeline.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the support for automatically updating the buffer while editing.
A configuration variable git-blame-autoupdate controls whether this should
be enabled or not.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git-blame use the current buffer contents for the blame, instead of
the saved file. This makes the blame correct even if there are unsaved
changes.
Also added a git-reblame command.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change installation instructions to using either "(require 'git-blame)"
or appropriate autoload instruction in GNU Emacs init file, .emacs
This required adding "(provide 'git-blame)" at the end of git-blame.el
and adding [preliminary] docstring to `git-blame-mode' function for
consistency (to mark function as interactive in `autoload' we have to
provide docstring as DOCSTRING is third arg, and INTERACTIVE fourth,
and both are optional). `git-blame-mode' is marked to autoload.
While at it ensure that we add `git-blame-mode' to `minor-mode-alist'
only once (in a way that does not depend on `cl' package).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add Emacs Lisp file headers, according to "Coding Conventions" chapter
in Emacs Lisp Reference Manual and Elisp Area Convetions for
EmacsWiki:
http://www.emacswiki.org/cgi-bin/wiki/ElispAreaConventions
Those include: copyright notice, GNU GPL boilerplate, description and
instalation instructions as provided in email and in commit message
introducing git-blame.el, compatibility notes from another email by
David Kågedal about what to change to use it in GNU Emacs 20, and
"git-blame ends here" to detect if file was truncated. First line
includes setting file encoding via first line local variable values
(file variables).
Added comment to "(require 'cl)" to note why it is needed; "Coding
Conventions" advises to avoid require the `cl' package of Common Lisp
extensions at run time.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Here's another version of git-blame.el that automatically tries to
create a sensible list of colors to use for both light and dark
backgrounds. Plus a few minor fixes.
To use:
1) Load into emacs: M-x load-file RET git-blame.el RET
2) Open a git-controlled file
3) Blame: M-x git-blame-mode
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is necessary for vc-version-other-window. Based on a patch by Sam
Vilain <sam.vilain@catalyst.net.nz>.
Currently, the vc-git-checkout function uses `git checkout' to fetch a
file from the git repository to the working copy. However, it is
completely ignoring the input argument that specifies the destination
file. `git-checkout' does not support specifying this, so we have to
use `git-cat-file', capture the output in a buffer and then save it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently, the vc-git-checkout function uses `git checkout' to fetch a
file from the git repository to the working copy. However, it is
completely ignoring the input argument that specifies the destination
file. `git-checkout' does not support specifying this, so we have to
use `git-cat-file', capture the output in a buffer and then save it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also use `concat' instead of `format' in the pretty-printer since
format doesn't preserve properties under XEmacs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead, reinitialize the keywords after the fact. This avoids
conflicts with other users of log-edit mode, like pcl-cvs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It doesn't make a difference for git.el, but it helps when interacting
with git-rebase and friends.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets us take advantage of the fact that git-cherry-pick now saves
the message in MERGE_MSG too.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Bound to 'o' by default, compatible with pcl-cvs and
buffer-mode. Suggested by Han-Wen Nienhuys.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is useful when doing a merge that changes many files with only a
few conflicts here and there.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
vc-git complains that it can't find the definition of ignore-errors
unless I (require 'cl). So I guess the correct place to do that is in
the file itself.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Provide some more detailed installation instructions, for the
elisp-challenged among us.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The deleted file should be labeled "renamed to" and the added file
"renamed from", not the other way around (duh!)
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch avoids problems if vc-git.el is installed and activated, but
the git executable is not available, for example
http://list-archive.xemacs.org/xemacs-beta/200608/msg00062.html
Signed-off-by: Ville Skyttä <scop@xemacs.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, running git-status again will now reuse an existing buffer
that displays the same directory. The old behavior of always creating
a new buffer can be obtained by customizing the git-reuse-status-buffer
option.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This way the ignore command will really only ignore the marked files
and not files with the same name in subdirectories.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add bindings for "h" and "?" in git-status-mode to display help about the mode,
including keymap via (describe-function 'git-status-mode), like in PCL-CVS.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Here's a patch that fixes print-log and diff compatibility with recent
vc versions, such as current GNU Emacs CVS.
Signed-off-by: Ville Skytt,Ad(B <scop@xemacs.org>
Makefiles in subdirectories now use existing value of INSTALL, bindir,
mandir if it is set, allowing those to be set in main Makefile or in
included config.mak. Main Makefile exports variables which it sets.
Accidentally it renames bin to bindir in Documentation/Makefile
(should be bindir from start, but is unused, perhaps to be removed).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-diff-file-merge-head generates a diff against the first merge
head, or with a prefix argument against the nth head. Bound to `d h'
by default.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If user name or email are not set explicitly, get them from the
user.name and user.email configuration values before falling back to
the Emacs defaults.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make sure that functions that call a git process and return a string
always return nil when the subprocess failed.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If `git-append-signed-off-by' is non-nil, automatically append a
sign-off line to the log message when editing it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update .gitignore files in the status list as they are created or
modified.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also set the list-buffers-directory variable for nicer buffer list
display.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fixed octal constants for XEmacs.
Added highlighting support in log-edit buffer for Emacs CVS.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a basic Emacs VC backend. It currently supports the following
commands: checkin, checkout, diff, log, revert, and annotate. There is
only limited support for working with revisions other than HEAD.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is an Emacs interface for git. The user interface is modeled on
pcl-cvs. It has been developed on Emacs 21 and will probably need some
tweaking to work on XEmacs.
The basic command is 'M-x git-status' which displays a buffer listing
modified files in the selected project tree. In that buffer the
following features are supported:
- add/remove files
- list unknown files
- commit marked files
- manage .gitignore
- commit merges based on MERGE_HEAD
- revert files to the HEAD version
- resolve conflicts with smerge or ediff
- diff files against HEAD/base/mine/other or combined diff
- get a log of the revisions for specified files
There are plenty of unimplemented features too, see the TODO list at
the top of the file...
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alexandre Julliard