kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Junio C Hamano	6831a88ac0	gitignore: lazily find dtype When we process "foo/" entries in gitignore files on a system that does not have d_type member in "struct dirent", the earlier implementation ran lstat(2) separately when matching with entries that came from the command line, in-tree .gitignore files, and $GIT_DIR/info/excludes file. This optimizes it by delaying the lstat(2) call until it becomes absolutely necessary. The initial idea for this change was by Jeff King, but I optimized it further to pass pointers to around. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	d6b8fc303b	gitignore(5): Allow "foo/" in ignore list to match directory "foo" A pattern "foo/" in the exclude list did not match directory "foo", but a pattern "foo" did. This attempts to extend the exclude mechanism so that it would while not matching a regular file or a symbolic link "foo". In order to differentiate a directory and non directory, this passes down the type of path being checked to excluded() function. A downside is that the recursive directory walk may need to run lstat(2) more often on systems whose "struct dirent" do not give the type of the entry; earlier it did not have to do so for an excluded path, but we now need to figure out if a path is a directory before deciding to exclude it. This is especially bad because an idea similar to the earlier CE_UPTODATE optimization to reduce number of lstat(2) calls would by definition not apply to the codepaths involved, as (1) directories will not be registered in the index, and (2) excluded paths will not be in the index anyway. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	63d285c849	per-directory-exclude: lazily read .gitignore files Operations that walk directories or trees, which potentially need to consult the .gitignore files, used to always try to open the .gitignore file every time they entered a new directory, even when they ended up not needing to call excluded() function to see if a path in the directory is ignored. This was done by push/pop exclude_per_directory() functions that managed the data in a stack. This changes the directory walking API to remove the need to call these two functions. Instead, the directory walk data structure caches the data used by excluded() function the last time, and lazily reuses it as much as possible. Among the data the last check used, the ones from deeper directories that the path we are checking is outside are discarded, data from the common leading directories are reused, and then the directories between the common directory and the directory the path being checked is in are checked for .gitignore file. This is very similar to the way gitattributes are handled. This API change also fixes "ls-files -c -i", which called excluded() without setting up the gitignore data via the old push/pop functions. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	dcf0c16ef1	core.excludesfile clean-up There are inconsistencies in the way commands currently handle the core.excludesfile configuration variable. The problem is the variable is too new to be noticed by anything other than git-add and git-status. * git-ls-files does not notice any of the "ignore" files by default, as it predates the standardized set of ignore files. The calling scripts established the convention to use .git/info/exclude, .gitignore, and later core.excludesfile. * git-add and git-status know about it because they call add_excludes_from_file() directly with their own notion of which standard set of ignore files to use. This is just a stupid duplication of code that need to be updated every time the definition of the standard set of ignore files is changed. * git-read-tree takes --exclude-per-directory=<gitignore>, not because the flexibility was needed. Again, this was because the option predates the standardization of the ignore files. * git-merge-recursive uses hardcoded per-directory .gitignore and nothing else. git-clean (scripted version) does not honor core.* because its call to underlying ls-files does not know about it. git-clean in C (parked in 'pu') doesn't either. We probably could change git-ls-files to use the standard set when no excludes are specified on the command line and ignore processing was asked, or something like that, but that will be a change in semantics and might break people's scripts in a subtle way. I am somewhat reluctant to make such a change. On the other hand, I think it makes perfect sense to fix git-read-tree, git-merge-recursive and git-clean to follow the same rule as other commands. I do not think of a valid use case to give an exclude-per-directory that is nonstandard to read-tree command, outside a "negative" test in the t1004 test script. This patch is the first step to untangle this mess. The next step would be to teach read-tree, merge-recursive and clean (in C) to use setup_standard_excludes(). Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	039bc64e88	core.excludesfile clean-up There are inconsistencies in the way commands currently handle the core.excludesfile configuration variable. The problem is the variable is too new to be noticed by anything other than git-add and git-status. * git-ls-files does not notice any of the "ignore" files by default, as it predates the standardized set of ignore files. The calling scripts established the convention to use .git/info/exclude, .gitignore, and later core.excludesfile. * git-add and git-status know about it because they call add_excludes_from_file() directly with their own notion of which standard set of ignore files to use. This is just a stupid duplication of code that need to be updated every time the definition of the standard set of ignore files is changed. * git-read-tree takes --exclude-per-directory=<gitignore>, not because the flexibility was needed. Again, this was because the option predates the standardization of the ignore files. * git-merge-recursive uses hardcoded per-directory .gitignore and nothing else. git-clean (scripted version) does not honor core.* because its call to underlying ls-files does not know about it. git-clean in C (parked in 'pu') doesn't either. We probably could change git-ls-files to use the standard set when no excludes are specified on the command line and ignore processing was asked, or something like that, but that will be a change in semantics and might break people's scripts in a subtle way. I am somewhat reluctant to make such a change. On the other hand, I think it makes perfect sense to fix git-read-tree, git-merge-recursive and git-clean to follow the same rule as other commands. I do not think of a valid use case to give an exclude-per-directory that is nonstandard to read-tree command, outside a "negative" test in the t1004 test script. This patch is the first step to untangle this mess. The next step would be to teach read-tree, merge-recursive and clean (in C) to use setup_standard_excludes(). Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Lars Knoll	68492fc73b	Speedup scanning for excluded files. Try to avoid a lot of work scanning for excluded files, by caching some more information when setting up the exclusion data structure. Speeds up 'git runstatus' on a repository containing the Qt sources by 30% and reduces the amount of instructions executed (as measured by valgrind) by a factor of 2. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Schindelin	7155b727c9	Introduce remove_dir_recursively() There was a function called remove_empty_dir_recursive() buried in refs.c. Expose a slightly enhanced version in dir.h: it can now optionally remove a non-empty directory. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Schindelin	e663674722	Add functions get_relative_cwd() and is_inside_dir() The function get_relative_cwd() works just as getcwd(), only that it takes an absolute path as additional parameter, returning the prefix of the current working directory relative to the given path. If the cwd is no subdirectory of the given path, it returns NULL. is_inside_dir() is just a trivial wrapper over get_relative_cwd(). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Jeff King	e96980ef81	builtin-add: simplify (and increase accuracy of) exclude handling Previously, the code would always set up the excludes, and then manually pick through the pathspec we were given, assuming that non-added but existing paths were just ignored. This was mostly correct, but would erroneously mark a totally empty directory as 'ignored'. Instead, we now use the collect_ignored option of dir_struct, which unambiguously tells us whether a path was ignored. This simplifies the code, and means empty directories are now just not mentioned at all. Furthermore, we now conditionally ask dir_struct to respect excludes, depending on whether the '-f' flag has been set. This means we don't have to pick through the result, checking for an 'ignored' flag; ignored entries were either added or not in the first place. We can safely get rid of the special 'ignored' flags to dir_entry, which were not used anywhere else. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Jeff King	2abd31b078	dir_struct: add collect_ignored option When set, this option will cause read_directory to keep track of which entries were ignored. While this shouldn't effect functionality in most cases, it can make warning messages to the user much more useful. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Martin Waitz	302b9282c9	rename dirlink to gitlink. Unify naming of plumbing dirlink/gitlink concept: git ls-files -z '*.[ch]' \| xargs -0 perl -pi -e 's/dirlink/gitlink/g;' -e 's/DIRLNK/GITLINK/g;' Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Linus Torvalds	095952585c	Teach directory traversal about subprojects This is the promised cleaned-up version of teaching directory traversal (ie the "read_directory()" logic) about subprojects. That makes "git add" understand to add/update subprojects. It now knows to look at the index file to see if a directory is marked as a subproject, and use that as information as whether it should be recursed into or not. It also generally cleans up the handling of directory entries when traversing the working tree, by splitting up the decision-making process into small functions of their own, and adding a fair number of comments. Finally, it teaches "add_file_to_cache()" that directory names can have slashes at the end, since the directory traversal adds them to make the difference between a file and a directory clear (it always did that, but my previous too-ugly-to-apply subproject patch had a totally different path for subproject directories and avoided the slash for that case). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Linus Torvalds	9fc42d6091	Optimize directory listing with pathspec limiter. The way things are set up, you can now pass a "pathspec" to the "read_directory()" function. If you pass NULL, it acts exactly like it used to do (read everything). If you pass a non-NULL pointer, it will simplify it into a "these are the prefixes without any special characters", and stop any readdir() early if the path in question doesn't match any of the prefixes. NOTE! This does not obviate the need for the caller to do the exact pathspec match later. It's a first-level filter on "read_directory()", but it does not do the full pathspec thing. Maybe it should. But in the meantime, builtin-add.c really does need to do first read_directory(dir, .., pathspec); if (pathspec) prune_directory(dir, pathspec, baselen); ie the "prune_directory()" part will do the exact pathspec pruning, while the "read_directory()" will use the pathspec just to do some quick high-level pruning of the directories it will recurse into. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	4d06f8ac43	Fix 'git add' with .gitignore When '*.ig' is ignored, and you have two files f.ig and d.ig/foo in the working tree, $ git add . correctly ignored f.ig but failed to ignore d.ig/foo. This was caused by a thinko in an earlier commit `4888c534`, when we tried to allow adding otherwise ignored files. After reverting that commit, this takes a much simpler approach. When we have an unmatched pathspec that talks about an existing pathname, we know it is an ignored path the user tried to add, so we include it in the set of paths directory walker returned. This does not let you say "git add -f D" on an ignored directory D and add everything under D. People can submit a patch to further allow it if they want to, but I think it is a saner behaviour to require explicit paths to be spelled out in such a case. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	c889763bf3	Revert "read_directory: show_both option." This reverts commit `4888c53409`.	18 years ago
Junio C Hamano	4888c53409	read_directory: show_both option. This teaches the internal read_directory() routine to return both interesting and ignored pathnames. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	e813d50e35	match_pathspec() -- return how well the spec matched This updates the return value from match_pathspec() so that the caller can tell cases between exact match, leading pathname match (i.e. file "foo/bar" matches a pathspec "foo"), or filename glob match. This can be used to prevent "rm dir" from removing "dir/file" without explicitly asking for recursive behaviour with -r flag, for example. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	f8a9d42872	read-tree: further loosen "working file will be lost" check. This follows up commit `ed93b449` where we removed overcautious "working file will be lost" check. A new option "--exclude-per-directory=.gitignore" can be used to tell the "git-read-tree" command that the user does not mind losing contents in untracked files in the working tree, if they need to be overwritten by a merge (either a two-way "switch branches" merge, or a three-way merge). Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Jeff King	c91f0d92ef	git-commit.sh: convert run_status to a C builtin This creates a new git-runstatus which should do roughly the same thing as the run_status function from git-commit.sh. Except for color support, the main focus has been to keep the output identical, so that it can be verified as correct and then used as a C platform for other improvements to the status printing code. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Linus Torvalds	3c6a370b0e	Move pathspec matching from builtin-add.c into dir.c I'll use it for builtin-rm.c too. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Linus Torvalds	b4189aa848	Clean up git-ls-file directory walking library interface This moves the code to add the per-directory ignore files for the base directory into the library routine. That not only allows us to turn the function push_exclude_per_directory() static again, it also simplifies the library interface a lot (the caller no longer needs to worry about any of the per-directory exclude files at all). Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Linus Torvalds	453ec4bdf4	libify git-ls-files directory traversal This moves the core directory traversal and filename exclusion logic into the general git library, making it available for other users directly. If we ever want to do "git commit" or "git add" as a built-in (and we do), we want to be able to handle most of git-ls-files as a library. NOTE! Not all of git-ls-files is libified by this. The index matching and pathspec prefix calculation is still in ls-files.c, but this is a big part of it. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago

21 Commits (7da0f3a46daac50782a71e8a6eb12355d49c419d)