Earlier we made "rev-list --object-edge" more aggressively list the
objects at the edge commits, in order to reduce number of objects
fetched into a shallow repository, but the change affected cases
other than "fetching into a shallow repository" and made it
unusably slow (e.g. fetching into a normal repository should not
have to suffer the overhead from extra processing). Limit it to a
more specific case by introducing --objects-edge-aggressive, a new
option to rev-list.
* bc/fetch-thin-less-aggressive-in-normal-repository:
pack-objects: use --objects-edge-aggressive for shallow repos
rev-list: add an option to mark fewer edges as uninteresting
Documentation: add missing article in rev-list-options.txt
"git checkout-index --temp=$target $path" did not work correctly
for paths outside the current subdirectory in the project.
* es/checkout-index-temp:
checkout-index: fix --temp relative path mangling
t2004: demonstrate broken relative path printing
t2004: standardize file naming in symlink test
t2004: drop unnecessary write-tree/read-tree
t2004: modernize style
The logic in "git bisect bad HEAD" etc. to avoid forcing the test
of the common ancestor of bad and good commits was broken.
* cc/bisect-rev-parsing:
bisect: add test to check that revs are properly parsed
bisect: parse revs before passing them to check_expected_revs()
The gettext N_ macro is used to mark strings for translation
without actually translating them. At runtime the string is
expected to be passed to the gettext API for translation.
If two N_ macro invocations appear next to each other with only
whitespace (or nothing at all) between them, the two separate
strings will be marked for translation, but the preprocessor
will then silently combine the strings into one and at runtime
the string passed to gettext will not match the strings that
were translated so no translation will actually occur.
Avoid this by adding parentheses around the expansion of the
N_ macro so that instead of ending up with two adjacent strings
that are then combined by the preprocessor, two adjacent strings
surrounded by parentheses result instead which causes a compile
error so the mistake can be quickly found and corrected.
However, since these string literals are typically assigned to
static variables and not all compilers support parenthesized
string literal assignments, allow this to be controlled by the
Makefile with the default only enabled when the compiler is
known to support the syntax.
For now only __GNUC__ enables this by default which covers both
gcc and clang which should result in early detection of any
adjacent N_ macros.
Although the necessary tests make the affected files a bit less
elegant, the benefit of avoiding propagation of a translation-
marking error to all the translation teams thus creating extra
work for them when the error is eventually detected and fixed
would seem to outweigh the minor inelegance the additional
configuration tests introduce.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- "exec_cmd.h" became unnecessary at b931aa5a (Call builtin ls-tree
in git-cat-file -p, 2006-05-26), when it changed an earlier code
that delegated tree display to "ls-tree" via the run_command()
API (hence needing "exec_cmd.h") to call cmd_ls_tree() directly.
We should have removed the include in the same commit, but we
forgot to do so.
- "diff.h" was added at e5fba602 (textconv: support for cat_file,
2010-06-15), together with "userdiff.h", but "userdiff.h" can be
included without including "diff.h"; the header was unnecessary
from the beginning.
- "tag.h" and "tree.h" were necessary since 8e440259 (Use blob_,
commit_, tag_, and tree_type throughout., 2006-04-02) to check
the type of object by comparing typename with tree_type and
tag_type (pointers to extern strings).
21666f1a (convert object type handling from a string to a number,
2007-02-26) made these <type>_type strings unnecessary, and it
could have switched to include "object.h", which is necessary to
use typename(), but it forgot to do so. Because "tag.h" and
"tree.h" include "object.h", it did not need to explicitly
include "object.h" in order to start using typename() itself.
We do not even have to include "object.h" after removing these
two #includes, because "builtin.h" includes "commit.h" which in
turn includes "object.h" these days. This happened at 7b9c0a69
(git-commit-tree: make it usable from other builtins,
2008-07-01).
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"cache.h" and "commit.h" are already included via "builtin.h".
We started to include "quote.h" at 575ba9d6 (GIT_TRACE: show which
built-in/external commands are executed, 2006-06-25) that wanted to
use sq_quote_print().
When 6ce4e61f (Trace into a file or an open fd and refactor tracing
code., 2006-09-02) introduced trace.c API, the calls this file makes
to sq_quote_print() were replaced by calls to trace_argv_printf()
that are declared in "cache.h", which this file already includes.
We should have stopped including "quote.h" in that commit, but
forgot to do so.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OpenSSL version 0.9.6b and before defined the function HMAC_cleanup.
Newer versions define HMAC_CTX_cleanup. Check for HMAC_CTX_cleanup and
fall back to HMAC_cleanup when the newer function is missing.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set or clear Makefile variables HAVE_CLOCK_GETTIME and
HAVE_CLOCK_MONOTONIC based upon results of the checks (overriding
default values from config.mak.uname).
CLOCK_MONOTONIC isn't available on RHEL3, but there are still RHEL3
systems being used in production.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect 'tv_nsec' field in 'struct stat' and set Makefile variable
NO_NSEC appropriately.
A side-effect of the above detection is that we also determine
whether 'stat.st_mtimespec' is available, so, as a bonus, set the
Makefile variable USE_ST_TIMESPEC, as well.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive.denyCurrentBranch is set to updateInstead, a push that
tries to update the branch that is currently checked out is accepted
only when the index and the working tree exactly matches the
currently checked out commit, in which case the index and the
working tree are updated to match the pushed commit. Otherwise the
push is refused.
This hook can be used to customize this "push-to-deploy" logic. The
hook receives the commit with which the tip of the current branch is
going to be updated, and can decide what kind of local changes are
acceptable and how to update the index and the working tree to match
the updated tip of the current branch.
For example, the hook can simply run `git read-tree -u -m HEAD "$1"`
in order to emulate 'git fetch' that is run in the reverse direction
with `git push`, as the two-tree form of `read-tree -u -m` is
essentially the same as `git checkout` that switches branches while
keeping the local changes in the working tree that do not interfere
with the difference between the branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have been silently tolerating errors by returning early with an
error that the caller ignores since rerere.autoupdate was introduced
in v1.6.0-rc0~120^2 (2008-06-22). So on error (for example if the
index is already locked), rerere can return success silently without
updating the index or with only some items in the index updated.
Better to treat such failures as a fatal error so the operator can
figure out what is wrong and fix it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds tests for the atomic push option.
The first four tests check if the atomic option works in
good conditions and the last three patches check if the atomic
option prevents any change to be pushed if just one ref cannot
be updated.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command line argument to the git push command to request atomic
pushes.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds support to send-pack to negotiate and use atomic pushes
iff the server supports it. Atomic pushes are activated by a new command
line flag --atomic.
In order to do this we also need to change the semantics for send_pack()
slightly. The existing send_pack() function actually doesn't send all the
refs back to the server when multiple refs are involved, for example
when using --all. Several of the failure modes for pushes can already be
detected locally in the send_pack client based on the information from the
initial server side list of all the refs as generated by receive-pack.
Any such refs that we thus know would fail to push are thus pruned from
the list of refs we send to the server to update.
For atomic pushes, we have to deal thus with both failures that are detected
locally as well as failures that are reported back from the server. In order
to do so we treat all local failures as push failures too.
We introduce a new status code REF_STATUS_ATOMIC_PUSH_FAILED so we can
flag all refs that we would normally have tried to push to the server
but we did not due to local failures. This is to improve the error message
back to the end user to flag that "these refs failed to update since the
atomic push operation failed."
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This renames ref_update_to_be_sent to check_to_send_update and inverts
the meaning of the return value. Having the return value inverted we
can have different values for the error codes. This is useful in a
later patch when we want to know if we hit the CHECK_REF_STATUS_REJECTED
case.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the atomic protocol option to allow
receive-pack to inform the client that it has
atomic push capability.
This commit makes the functionality introduced
in the previous commits go live for the serving
side. The changes in documentation reflect the
protocol capabilities of the server.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces the new function execute_commands_atomic which will use
one atomic transaction for all updates. The default behavior is still
the old non atomic way, one ref at a time. This is to cause as little
disruption as possible to existing clients. It is unknown if there are
client scripts that depend on the old non-atomic behavior so we make it
opt-in for now.
A later patch will add the possibility to actually use the functionality
added by this patch. For now use_atomic is always 0.
Inspired-by: Ronnie Sahlberg <sahlberg@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves all code related to transactions into the
execute_commands_non_atomic function. This includes
beginning and committing the transaction as well as
dealing with the errors which may occur during the
begin and commit phase of a transaction.
No functional changes intended.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit allows us in a later patch to easily distinguish between
the non atomic way to update the received refs and the atomic way which
is introduced in a later patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Discussion on the previous patch revealed we rather want to err on the
safe side. To do so we need to stop receive-pack in case of the possible
future bug when connectivity is not checked on a shallow push.
Also while touching that code we considered that removing the reported
refs may be harmful in some situations. Sound the message more like a
"This Cannot Happen, Please Investigate!" instead of giving advice to
remove refs.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the main "execute_commands" loop in receive-pack easier to read
by splitting out some steps into helper functions. The new helper
'should_process_cmd' checks if a ref update is unnecessary, whether
due to an error having occurred or for another reason. The helper
'warn_if_skipped_connectivity_check' warns if we have forgotten to
run a connectivity check on a ref which is shallow for the client
which would be a bug.
This will help us to duplicate less code in a later patch when we make
a second copy of the "execute_commands" loop.
No functional change intended.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apache servers using mod_auth_kerb can be configured to allow the user
to authenticate either using Negotiate (using the Kerberos ticket) or
Basic authentication (using the Kerberos password). Often, one will
want to use Negotiate authentication if it is available, but fall back
to Basic authentication if the ticket is missing or expired.
However, libcurl will try very hard to use something other than Basic
auth, even over HTTPS. If Basic and something else are offered, libcurl
will never attempt to use Basic, even if the other option fails.
Teach the HTTP client code to stop trying authentication mechanisms that
don't use a password (currently Negotiate) after the first failure,
since if they failed the first time, they will never succeed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.submodule when set to log produces output which git-am cannot
handle. Ignore this setting when generating patch output.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am will break when using diff.submodule=log; add some test cases
to illustrate this breakage as simply as possible. There are
currently two ways this can fail:
* With errors ("unrecognized input"), if only change
* Silently (no submodule change), if other files change
Test for both conditions and ensure without diff.submodule this works.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sample pre-push hook used customized IFS=' ' for no good reason.
* jh/pre-push-sample-no-custom-ifs:
pre-push.sample: remove unnecessary and misleading IFS=' '
Using the exit status of the last command in the prompt, e.g.
PS1='$(__git_ps1) $? ', did not work well because the helper
function stomped on the exit status.
* tf/prompt-preserve-exit-status:
git-prompt: preserve value of $? inside shell prompt
Simplify the procedure to generate unicode table.
* bb/update-unicode-table:
update_unicode.sh: delete the command group
update_unicode.sh: make the output structure visible
update_unicode.sh: shorten uniset invocation path
update_unicode.sh: set UNICODE_DIR only once
update_unicode.sh: simplify output capture
"git send-email" normally identifies itself via X-Mailer: header
in the message it sends out. A new command line flag allows the
user to squelch the header.
* lh/send-email-hide-x-mailer:
test/send-email: --[no-]xmailer tests
send-email: add --[no-]xmailer option
"git send-email" did not handle RFC 2047 encoded headers quite
right.
* rd/send-email-2047-fix:
send-email: handle adjacent RFC 2047-encoded words properly
send-email: align RFC 2047 decoding more closely with the spec
The top-of-the-file instruction for completion scripts (in contrib/)
did not name the files correctly.
* pd/completion-filenames-fix:
Update documentation occurrences of filename .sh
"git add -i" did not notice when the interactive command input
stream went away and kept asking.
* jk/add-i-read-error:
add--interactive: leave main loop on read error
Traditionally we tried to avoid interpreting date strings given by
the user as future dates, e.g. GIT_COMMITTER_DATE=2014-12-10 when
used early November 2014 was taken as "October 12, 2014" because it
is likely that a date in the future, December 10, is a mistake.
Loosen this and do not tiebreak by future-ness of the date when
(1) ISO-like format is used, and
(2) the string can make sense interpreted as both y-m-d and y-d-m.
* jk/approxidate-avoid-y-d-m-over-future-dates:
approxidate: allow ISO-like dates far in the future
pass TIME_DATE_NOW to approxidate future-check
Junio C Hamano