kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Jeff King	a3da882120	pager: do wait_for_pager on signal death Since `ea27a18` (spawn pager via run_command interface), the original git process actually does git work, and the pager is a child process (actually, on Windows it has always been that way, since Windows lacks fork). After spawning the pager, we register an atexit() handler that waits for the pager to finish. Unfortunately, that handler does not always run. In particular, if git is killed by a signal, then we exit immediately. The calling shell then thinks that git is done; however, the pager is still trying to run and impact the terminal. The result can be seen by running a long git process with a pager (e.g., "git log -p") and hitting ^C. Depending on your config, you should see the shell prompt, but pressing a key causes the pager to do any terminal de-initialization sequence. This patch just intercepts any death-dealing signals and waits for the pager before dying. Under typical less configuration, that means hitting ^C will cause git to stop generating output, but the pager will keep running. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	a8335024c2	pager: do not dup2 stderr if it is already redirected An earlier commit `61b8050` (sending errors to stdout under $PAGER, 2008-02-16) avoided losing the error messages that are sent to the standard error when $PAGER is in effect by dup2'ing fd 2 to the pager. his way, showing a tag object that points to a bad object: $ git show tag-foo would give the error message to the pager. However, it was not quite right if the user did: $ git show 2>error.log tag-foo i.e. use the pager but store the errors in a separate file. Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Jeff King	ea27a18ce2	spawn pager via run_command interface This has two important effects: 1. The pager is now the _child_ process, instead of the parent. This means that whatever spawned git (e.g., the shell) will see the exit code of the git process, and not the pager. 2. The mingw and regular code are now unified, which makes the setup_pager function much simpler. There are two caveats: 1. We used to call execlp directly on the pager, followed by trying to exec it via the shall. We now just use the shell (which is what mingw has always done). This may have different results for pager names which contain shell metacharacters. It is also slightly less efficient because we unnecessarily run the shell; however, pager spawning is by definition an interactive task, so it shouldn't be a huge problem. 2. The git process will remain in memory while the user looks through the pager. This is potentially wasteful. We could get around this by turning the parent into a meta-process which spawns _both_ git and the pager, collects the exit status from git, waits for both to end, and then exits with git's exit code. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Sixt	bfdd9ffd2f	Windows: Make the pager work. Since we have neither fork() nor exec(), we have to spawn the pager and feed it with the program's output. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>	17 years ago
Johannes Schindelin	ef90d6d420	Provide git_config with a callback-data parameter git_config() only had a function parameter, but no callback data parameter. This assumes that all callback functions only modify global variables. With this patch, every callback gets a void * parameter, and it is hoped that this will help the libification effort. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	61b80509e3	sending errors to stdout under $PAGER If you do this (and you are not an Emacs user who uses PAGER=cat in your shell buffer): $ git init Initialized empty Git repository in .git/ $ echo hello world >foo $ H=$(git hash-object -w foo) $ git tag -a foo-tag -m "Tags $H" $H $ echo $H 3b18e512dba79e4c8300dd08aeb37f8e728b8dad $ rm -f .git/objects/3b/18e5* $ git show foo-tag tag foo-tag Tagger: Junio C Hamano <gitster@pobox.com> Date: Sat Feb 16 10:43:23 2008 -0800 Tags 3b18e512dba79e4c8300dd08aeb37f8e728b8dad you do not get any indication of error. If you are careful, you would notice that no contents from the tagged object is displayed, but that is about it. If you run the "show" command without pager, however, you will see the error: $ git --no-pager show foo-tag tag foo-tag Tagger: Junio C Hamano <gitster@pobox.com> Date: Sat Feb 16 10:43:23 2008 -0800 Tags 3b18e512dba79e4c8300dd08aeb37f8e728b8dad error: Could not read object 3b18e512dba79e4c8300dd08aeb37f8e728b8dad Because we spawn the pager as the foreground process and feed its input via pipe from the real command, we cannot affect the exit status the shell sees from git command when the pager is in use (I think there is not much gain we can have by working it around, though). But at least it may make sense to show the error message to the user sitting in front of the pager. [jc: Edgar Toernig suggested a much nicer implementation than what I originally posted, which I took.] Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jeff King	6e9af863ee	Support GIT_PAGER_IN_USE environment variable When deciding whether or not to turn on automatic color support, git_config_colorbool checks whether stdout is a tty. However, because we run a pager, if stdout is not a tty, we must check whether it is because we started the pager. This used to be done by checking the pager_in_use variable. This variable was set only when the git program being run started the pager; there was no way for an external program running git indicate that it had already started a pager. This patch allows a program to set GIT_PAGER_IN_USE to a true value to indicate that even though stdout is not a tty, it is because a pager is being used. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Sixt	80bbe72b76	Move #include <sys/select.h> and <sys/ioctl.h> to git-compat-util.h. ... since all system headers are pulled in via git-compat-util.h Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	cad3a2056d	pager: find out pager setting from configuration It was very unfortunate that we added core.pager setting to the configuration file; even when the underlying command does not care if there is no git repository is involved (think "git diff --no-index"), the user would now rightfully want the configuration setting to be honored, which means we would need to read the configuration file before we launch the pager. This is a minimum change in the sense that it restores the old behaviour of not even reading config in setup_git_directory(), but have the core.pager honored when we know it matters. Note that this does not cover "git -p --git-dir where command"; the -p option immediately trigger the pager settings before we even see --git-dir to learn where the configuration file is, so we will end up reading the configuration from the place where we would _normally_ find the git repository. Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Brian Gernhardt	54adf3706c	Add core.pager config variable. This adds a configuration variable that performs the same function as, but is overridden by, GIT_PAGER. Signed-off-by: Brian Gernhardt <benji@silverinsanity.com> Acked-by: Johannes E. Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Linus Torvalds	35ce862279	pager: Work around window resizing bug in 'less' If you resize the terminal while less is waiting for input, less will exit entirely without even showing the output. This is very noticeable if you do something like "git diff" on a big and cold-cache tree and git takes a few seconds to think, and then you resize the window while it's preparing. Boom. No output AT ALL. The way to reproduce the problem is to do some pager operation that takes a while in git, and resizing the window while git is thinking about the output. Try git diff --stat v2.6.12.. in the kernel tree to do something where it takes a while for git to start outputting information. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	0abc0260fa	pager: default to LESS=FRSX not LESS=FRS Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	96a035d1db	pager: default to LESS=FRS Recent change to paginate "git diff" by default is often irritating when you do not have any change (or very small change) in your working tree. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Matthias Lederhofer	c27d205aae	pager: environment variable GIT_PAGER to override PAGER Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Johannes Schindelin	b75a82b754	Fix linking for not-so-clever linkers. On one of my systems, the linker is not intelligent enough to link with pager.o (in libgit.a) when only the variable pager_in_use is needed. The consequence is that the linker complains about an undefined variable. So, put the variable into environment.o, where it is linked always. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	85fb65ed6e	"git -p cmd" to page anywhere This allows you to say: git -p diff v2.6.16-rc5.. and the command pipes the output of any git command to your pager. [jc: this resurrects a month old RFC patch with improvement suggested by Linus to call it --paginate instead of --less.] Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Johannes Schindelin	cd112cef99	diff options: add --color This patch is a slightly adjusted version of Junio's patch: http://www.gelato.unsw.edu.au/archives/git/0604/19354.html However, instead of using a config variable, this patch makes it available as a diff option. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Linus Torvalds	34fd1c9ac5	git-log produces no output When $PAGER is set to 'less -i', we used to fail because we assumed the $PAGER is a command and simply exec'ed it. Try exec first, and then run it through shell if it fails. This allows even funkier PAGERs like these ;-): PAGER='sed -e "s/^/`date`: /" \| more' PAGER='contrib/colordiff.perl \| less -RS' Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	caef71a535	Do not fork PAGER=cat Unless the user has a nonstandard "cat" command that does not meow like a cat, this should not break anything and would save an extra pipe. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Johannes Schindelin	402461aab1	pager: do not fork a pager if PAGER is set to empty. This skips an extra pipe, and helps debugging tremendously. [jc: PAGER=cat is a questionable hack and should be done as a separate patch. ] Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Linus Torvalds	f67b45f862	Introduce trivial new pager.c helper infrastructure This introduces the new function void setup_pager(void); to set up output to be written through a pager applocation. All in preparation for doing the simple scripts in C. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago

23 Commits (7a4ee28f41270bf032d0dd0bfb17f601b9b3971a)