kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Boyd Lynn Gerber	d4c44443b6	progress.c: avoid use of dynamic-sized array Dynamically sized arrays are gcc and C99 construct. Using them hurts portability to older compilers, although using them is nice in this case it is not desirable. This patch removes the only use of the construct in stop_progress_msg(); the function is about writing out a single line of a message, and the existing callers of this function feed messages of only bounded size anyway, so use of dynamic array is simply overkill. Signed-off-by: Boyd Lynn Gerber <gerberb@zenez.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Sixt	137a0d0ef5	Flush progress message buffer in display(). This will make progress display from pack-objects (invoked via upload-pack) more responsive on platforms with an implementation of stdio whose stderr is line buffered. The standard error stream is defined to be merely "not fully buffered"; this is different from "unbuffered". If the implementation of the stdio library chooses to make it line buffered, progress reports that end with CR but do not contain LF will accumulate in the stdio buffer before written out. A fflush() after each progress display gives a nice continuous progress. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Nicolas Pitre	a984a06a07	nicer display of thin pack completion In the same spirit of prettifying Git's output display for mere mortals, here's a simple extension to the progress API allowing for a final message to be provided when terminating a progress line, and use it for the display of the number of objects needed to complete a thin pack, saving yet one more line of screen display. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Nicolas Pitre	53ed7b5a5d	make display of total transferred fully accurate The minimum delay of 1/2 sec between successive throughput updates might not have been elapsed when display_throughput() is called for the last time, potentially making the display of total transferred bytes not right when progress is said to be done. Let's force an update of the throughput display as well when the progress is complete. As a side effect, the total transferred will always be displayed even if the actual transfer rate doesn't have time to kickin. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Nicolas Pitre	218558af59	make display of total transferred more accurate The throughput display needs a delay period before accounting and displaying anything. Yet it might be called after some amount of data has already been transferred. The display of total data is therefore accounted late and therefore smaller than the reality. Let's call display_throughput() with an absolute amount of transferred data instead of a relative number, and let the throughput code find the relative amount of data by itself as needed. This way the displayed total is always exact. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Nicolas Pitre	81f6654a47	Show total transferred as part of throughput progress Right now it is infeasible to offer to the user a reasonable concept of when a clone will be complete as we aren't able to come up with the final pack size until after we have actually transferred the entire thing to the client. However in many cases users can work with a rough rule-of-thumb; for example it is somewhat well known that git.git is about 16 MiB today and that linux-2.6.git is over 120 MiB. We now show the total amount of data we have transferred over the network as part of the throughput meter, organizing it in "human friendly" terms like `ls -h` would do. Users can glance at this, see that the total transferred size is about 3 MiB, see the throughput of X KiB/sec, and determine a reasonable figure of about when the clone will be complete, assuming they know the rough size of the source repository or are able to obtain it. This is also a helpful indicator that there is progress being made even if we stall on a very large object. The thoughput meter may remain relatively constant and the percentage complete and object count won't be changing, but the total transferred will be increasing as additional data is received for this object. [from an initial proposal from Shawn O. Pearce] Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Nicolas Pitre	3e935d1982	make sure throughput display gets updated even if progress doesn't move Currently the progress/throughput display update happens only through display_progress(). If the progress based on object count remains unchanged because a large object is being received, the latest throughput won't be displayed. The display update should occur through display_throughput() as well. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Nicolas Pitre	74b6792f7b	add some copyright notice to the progress display code Some self patting on the back to keep my ego alive. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Nicolas Pitre	cf84d51c43	add throughput to progress display This adds the ability for the progress code to also display transfer throughput when that makes sense. The math was inspired by commit `c548cf4ee0` from Linus. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Nicolas Pitre	dc6a0757c4	make struct progress an opaque type This allows for better management of progress "object" existence, as well as making the progress display implementation more independent from its callers. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Nicolas Pitre	42e18fbf5f	more compact progress display Each progress can be on a single line instead of two. [sp: Changed "Checking files out" to "Checking out files" at Johannes Sixt's suggestion as it better explains the action that is taking place] Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>	17 years ago
Alex Riesen	421f9d1685	Fix the progress code to output LF only when it is really needed Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Nicolas Pitre	180a9f2268	provide a facility for "delayed" progress reporting This allows for progress to be displayed only if the progress has not reached a specified percentage treshold within a given delay in seconds. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Nicolas Pitre	13aaf14825	make progress "title" part of the common progress interface If the progress bar ends up in a box, better provide a title for it too. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Nicolas Pitre	96a02f8f6d	common progress display support Instead of having this code duplicated in multiple places, let's have a common interface for progress display. If someday someone wishes to display a cheezy progress bar instead then only one file will have to be changed. Note: I left merge-recursive.c out since it has a strange notion of progress as it apparently increase the expected total number as it goes. Someone with more intimate knowledge of what that is supposed to mean might look at converting it to the common progress interface. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago

15 Commits (79bbc7fb078f8cabe04020c4619be9b571371398)