Allow -1 as a value for hook.jobs, hook.<event>.jobs, and the -j
CLI flag to mean "use as many jobs as there are CPU cores", matching
the convention used by fetch.parallel and other Git subsystems.
The value is resolved to online_cpus() at parse time so the rest
of the code always works with a positive resolved count.
Other non-positive values (0, -2, etc) are rejected with a warning
(config) or die (CLI).
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a hook.<event>.enabled config key that disables all hooks for
a given event, when set to false, acting as a high-level switch
above the existing per-hook hook.<friendly-name>.enabled.
Event-disabled hooks are shown in "git hook list" with an
"event-disabled" tab-separated prefix before the name:
$ git hook list test-hook
event-disabled hook-1
event-disabled hook-2
With --show-scope:
$ git hook list --show-scope test-hook
local event-disabled hook-1
When a hook is both per-hook disabled and event-disabled, only
"event-disabled" is shown: the event-level switch is the more
relevant piece of information, and the per-hook "disabled" status
will surface once the event is re-enabled.
Using an event name as a friendly-name (e.g. hook.<event>.enabled)
can cause ambiguity, so a fatal error is issued when using a known
event name and a warning is issued for unknown event name, since
a collision cannot be detected with certainty for unknown events.
Suggested-by: Patrick Steinhardt <ps@pks.im>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a hook.<event>.jobs count config that allows users to override the
global hook.jobs setting for specific hook events.
This allows finer-grained control over parallelism on a per-event basis.
For example, to run `post-receive` hooks with up to 4 parallel jobs
while keeping other events at their global default:
[hook]
post-receive.jobs = 4
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the parallel job count as a command-line flag so callers can
request parallelism without relying only on the hook.jobs config.
Add tests covering serial/parallel execution and TTY behaviour under
-j1 vs -jN.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several hooks are known to be inherently non-parallelizable, so initialize
them with RUN_HOOKS_OPT_INIT_FORCE_SERIAL. This pins jobs=1 and overrides
any hook.jobs or runtime -j flags.
These hooks are:
applypatch-msg, pre-commit, prepare-commit-msg, commit-msg, post-commit,
post-checkout, and push-to-checkout.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pre-push is the only hook that keeps stdout and stderr separate (for
backwards compatibility with git-lfs and potentially other users). This
prevents parallelizing it because run-command needs stdout_to_stderr=1
to buffer and de-interleave parallel outputs.
Since we now default to jobs=1, backwards compatibility is maintained
without needing any extension or extra config: when no parallelism is
requested, pre-push behaves exactly as before.
When the user explicitly opts into parallelism via hook.jobs > 1,
hook.<event>.jobs > 1, or -jN, they accept the changed output behavior.
Document this and let get_hook_jobs() set stdout_to_stderr=1 automatically
when jobs > 1, removing the need for any extension infrastructure.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hooks always run in sequential order due to the hardcoded jobs == 1
passed to run_process_parallel(). Remove that hardcoding to allow
users to run hooks in parallel (opt-in).
Users need to decide which hooks to run in parallel, by specifying
"parallel = true" in the config, because Git cannot know if their
specific hooks are safe to run or not in parallel (for e.g. two hooks
might write to the same file or call the same program).
Some hooks are unsafe to run in parallel by design: these will marked
in the next commit using RUN_HOOKS_OPT_INIT_FORCE_SERIAL.
The hook.jobs config specifies the default number of jobs applied to all
hooks which have parallelism enabled.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hook.jobs config is a global way to set hook parallelization for
all hooks, in the sense that it is not per-event nor per-hook.
Finer-grained configs will be added in later commits which can override
it, for e.g. via a per-event type job options. Next commits will also
add to this item's documentation.
Parse hook.jobs config key in hook_config_lookup_all() and store its
value in hook_all_config_cb.jobs, then transfer it into r->jobs after
the config pass completes.
This is mostly plumbing and the cached value is not yet used.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The experimental `git replay` command learned the `--ref=<ref>` option
to allow specifying which ref to update, overriding the default behavior.
* tc/replay-ref:
replay: allow to specify a ref with option --ref
replay: use stuck form in documentation and help message
builtin/replay: mark options as not negatable
Various code clean-up around odb subsystem.
* ps/odb-cleanup:
odb: drop unneeded headers and forward decls
odb: rename `odb_has_object()` flags
odb: use enum for `odb_write_object` flags
odb: rename `odb_write_object()` flags
treewide: use enum for `odb_for_each_object()` flags
CodingGuidelines: document our style for flags
Handling of signed commits and tags in fast-import has been made more
configurable.
* jt/fast-import-signed-modes:
fast-import: add 'abort-if-invalid' mode to '--signed-tags=<mode>'
fast-import: add 'sign-if-invalid' mode to '--signed-tags=<mode>'
fast-import: add 'strip-if-invalid' mode to '--signed-tags=<mode>'
fast-import: add 'abort-if-invalid' mode to '--signed-commits=<mode>'
fast-export: check for unsupported signing modes earlier
The way the "git log -L<range>:<file>" feature is bolted onto the
log/diff machinery is being reworked a bit to make the feature
compatible with more diff options, like -S/G.
* mm/line-log-use-standard-diff-output:
doc: note that -L supports patch formatting and pickaxe options
t4211: add tests for -L with standard diff options
line-log: route -L output through the standard diff pipeline
line-log: fix crash when combined with pickaxe options
pack-objects's --stdin-packs=follow mode learns to handle
excluded-but-open packs.
* tb/stdin-packs-excluded-but-open:
repack: mark non-MIDX packs above the split as excluded-open
pack-objects: support excluded-open packs with --stdin-packs
t7704: demonstrate failure with once-cruft objects above the geometric split
pack-objects: refactor `read_packs_list_from_stdin()` to use `strmap`
pack-objects: plug leak in `read_stdin_packs()`
"git replay" (experimental) learns, in addition to "pick" and
"replay", a new operating mode "revert".
* sa/replay-revert:
replay: add --revert mode to reverse commit changes
sequencer: extract revert message formatting into shared function
Code clean-up around the recent "hooks defined in config" topic.
* ar/config-hook-cleanups:
hook: reject unknown hook names in git-hook(1)
hook: show disabled hooks in "git hook list"
hook: show config scope in git hook list
hook: introduce hook_config_cache_entry for per-hook data
t1800: add test to verify hook execution ordering
hook: make consistent use of friendly-name in docs
hook: replace hook_list_clear() -> string_list_clear_func()
hook: detect & emit two more bugs
hook: rename cb_data_free/alloc -> hook_data_free/alloc
hook: fix minor style issues
builtin/receive-pack: properly init receive_hook strbuf
hook: move unsorted_string_list_remove() to string-list.[ch]
`git backfill` learned to accept revision and pathspec arguments.
* ds/backfill-revs:
t5620: test backfill's unknown argument handling
path-walk: support wildcard pathspecs for blob filtering
backfill: work with prefix pathspecs
backfill: accept revision arguments
t5620: prepare branched repo for revision tests
revision: include object-name.h
Improve the recently introduced `git format-patch
--commit-list-format` (formerly `--cover-letter-format`) option,
including a new "modern" preset and better CLI ergonomics.
* mf/format-patch-commit-list-format:
format-patch: --commit-list-format without prefix
format-patch: add preset for --commit-list-format
format-patch: wrap generate_commit_list_cover()
format.commitListFormat: strip meaning from empty
docs/pretty-formats: add %(count) and %(total)
format-patch: rename --cover-letter-format option
format-patch: refactor generate_commit_list_cover
pretty.c: better die message %(count) and %(total)
"git format-patch --cover-letter" learns to use a simpler format
instead of the traditional shortlog format to list its commits with
a new --cover-letter-format option and format.commitListFormat
configuration variable.
* mf/format-patch-cover-letter-format:
docs: add usage for the cover-letter fmt feature
format-patch: add commitListFormat config
format-patch: add ability to use alt cover format
format-patch: move cover letter summary generation
pretty.c: add %(count) and %(total) placeholders
When option '--onto' is passed to git-replay(1), the command will update
refs from the <revision-range> passed to the command. When using option
'--advance' or '--revert', the argument of that option is a ref that
will be updated.
To enable users to specify which ref to update, add option '--ref'. When
using option '--ref', the refs described above are left untouched and
instead the argument of this option is updated instead.
Because this introduces code paths in replay.c that jump to `out` before
init_basic_merge_options() is called on `merge_opt`, zero-initialize the
struct.
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitcli(7) suggests to use stuck form. Change the documentation strings
to use this form.
While at it, reorder them to match the order in the docs.
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The HTTP transport learned to react to "429 Too Many Requests".
* vp/http-rate-limit-retries:
http: add support for HTTP 429 rate limit retries
strbuf_attach: fix call sites to pass correct alloc
strbuf: pass correct alloc to strbuf_attach() in strbuf_reencode()
We have recently iterated a bit on our style for flags. Document this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both the synopsis and explanation are incorrect and contradict each
other.
The synopsis claims "push" can only be omitted when you do not give any
options and arguments.
The explanation correctly claims that non-option arguments are not
allowed, except pathspec elements preceded by double hyphens.
But it also adds "-p" to the list of exceptions, even though it is an
option argument.
Signed-off-by: Quentin Bernet <quentin.bernet@bluewin.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pattern format section describes how patterns are interpreted
relative to the location of a .gitignore file, but does not mention
the behavior for exclude sources outside the working tree.
Clarify that patterns from $GIT_DIR/info/exclude and core.excludesFile
are treated as if they are specified at the root of the working tree,
so a leading '/' anchors matches at the repository root.
Reported-by: Dan Drake <dan@dandrake.org>
Signed-off-by: Shreyansh Paliwal <shreyanshpaliwalcmsmn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cd846bacc7 (pack-objects: introduce '--stdin-packs=follow',
2025-06-23), pack-objects learned to traverse through commits in
included packs when using '--stdin-packs=follow', rescuing reachable
objects from unlisted packs into the output.
When we encounter a commit in an excluded pack during this rescuing
phase we will traverse through its parents. But because we set
`revs.no_kept_objects = 1`, commit simplification will prevent us from
showing it via `get_revision()`. (In practice, `--stdin-packs=follow`
walks commits down to the roots, but only opens up trees for ones that
do not appear in an excluded pack.)
But there are certain cases where we *do* need to see the parents of an
object in an excluded pack. Namely, if an object is rescue-able, but
only reachable from object(s) which appear in excluded packs, then
commit simplification will exclude those commits from the object
traversal, and we will never see a copy of that object, and thus not
rescue it.
This is what causes the failure in the previous commit during repacking.
When performing a geometric repack, packs above the geometric split that
weren't part of the previous MIDX (e.g., packs pushed directly into
`$GIT_DIR/objects/pack`) may not have full object closure. When those
packs are listed as excluded via the '^' marker, the reachability
traversal encounters the sequence described above, and may miss objects
which we expect to rescue with `--stdin-packs=follow`.
Introduce a new "excluded-open" pack prefix, '!'. Like '^'-prefixed
packs, objects from '!'-prefixed packs are excluded from the resulting
pack. But unlike '^', commits in '!'-prefixed packs *are* used as
starting points for the follow traversal, and the traversal does not
treat them as a closure boundary.
In order to distinguish excluded-closed from excluded-open packs during
the traversal, introduce a new `pack_keep_in_core_open` bit on
`struct packed_git`, along with a corresponding `KEPT_PACK_IN_CORE_OPEN`
flag for the kept-pack cache.
In `add_object_entry_from_pack()`, move the `want_object_in_pack()`
check to *after* `add_pending_oid()`. This is necessary so that commits
from excluded-open packs are added as traversal tips even though their
objects won't appear in the output. As a consequence, the caller
`for_each_object_in_pack()` will always provide a non-NULL 'p', hence we
are able to drop the "if (p)" conditional.
The `include_check` and `include_check_obj` callbacks on `rev_info` are
used to halt the walk at closed-excluded packs, since objects behind a
'^' boundary are guaranteed to have closure and need not be rescued.
The following commit will make use of this new functionality within the
repack layer to resolve the test failure demonstrated in the previous
commit.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using format-patch with --commit-list-format different than shortlog,
causes the commit entry lines to wrap if they get longer than
MAIL_DEFAULT_WRAP (72 characters).
While this might be sensible for many when sending changes through
email, it forces this decision of wrapping on the user, reducing the
control granularity of --commit-list-format.
Teach generate_commit_list_cover() to respect commit entry line lengths
and place this wrapping rule on the "modern" preset format instead.
Signed-off-by: Mirko Faina <mroik@delayed.space>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation specifies that "git format-patch" would default to
format.commitListFormat if --commit-list-format is not given, but
doesn't specify the default if the format.commitListFormat is not set.
The text for --cover-letter is also obsolete as the commit list can now
be something other than a shortlog.
Document to reflect changes.
Signed-off-by: Mirko Faina <mroik@delayed.space>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc updates.
* kh/doc-interpret-trailers-1:
interpret-trailers: use placeholder instead of *
doc: config: convert trailers section to synopsis style
doc: interpret-trailers: normalize and fill out options
doc: interpret-trailers: convert to synopsis style
The reference-transaction hook was taught to be triggered before
taking locks on references in the "preparing" phase.
* ej/ref-transaction-hook-preparing:
refs: add 'preparing' phase to the reference-transaction hook
With c20f112e51 (fast-import: add 'strip-if-invalid' mode to
--signed-commits=<mode>, 2025-11-17), git-fast-import(1) learned to
verify commit signatures during import and strip signatures that fail
verification. Extend the same behavior to signed tag objects by
introducing a 'strip-if-invalid' mode for the '--signed-tags' option.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--signed-commits=<mode>' option for git-fast-import(1) configures
how signed commits are handled when encountered. In cases where an
invalid commit signature is encountered, a user may wish to abort the
operation entirely. Introduce an 'abort-if-invalid' mode to do so.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing implementation of 'git backfill' only includes downloading
missing blobs reachable from HEAD. Advanced uses may desire more general
commit limiting options, such as '--all' for all references, specifying a
commit range via negative references, or specifying a recency of use such as
with '--since=<date>'.
All of these options are available if we use setup_revisions() to parse the
unknown arguments with the revision machinery. This opens up a large number
of possibilities, only a small set of which are tested here.
For documentation, we avoid duplicating the option documentation and instead
link to the documentation of 'git rev-list'.
Note that these arguments currently allow specifying a pathspec, which
modifies the commit history checks but does not limit the paths used in the
backfill logic. This will be updated in a future change.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a `--revert <branch>` mode to git replay that undoes the changes
introduced by the specified commits. Like --onto and --advance, --revert
is a standalone mode: it takes a branch argument and updates that branch
with the newly created revert commits.
At GitLab, we need this in Gitaly for reverting commits directly on bare
repositories without requiring a working tree checkout.
The approach is the same as sequencer.c's do_pick_commit() -- cherry-pick
and revert are just the same three-way merge with swapped arguments:
- Cherry-pick: merge(ancestor=parent, ours=current, theirs=commit)
- Revert: merge(ancestor=commit, ours=current, theirs=parent)
We swap the base and pickme trees passed to merge_incore_nonrecursive()
to reverse the diff direction.
Reverts are processed newest-first (matching git revert behavior) to
reduce conflicts by peeling off changes from the top. Each revert
builds on the result of the previous one via the last_commit fallback
in the main replay loop, rather than relying on the parent-mapping
used for cherry-pick.
Revert commit messages follow the usual git revert conventions: prefixed
with "Revert" (or "Reapply" when reverting a revert), and including
"This reverts commit <hash>.". The author is set to the current user
rather than preserving the original author, matching git revert behavior.
Helped-by: Christian Couder <christian.couder@gmail.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Elijah Newren <newren@gmail.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git hook run" and "git hook list" to reject hook event names
that are not recognized by Git. This helps catch typos such as
"prereceive" when "pre-receive" was intended, since in 99% of the
cases users want known (already-existing) hook names.
The list of known hooks is derived from the generated hook-list.h
(built from Documentation/githooks.adoc). This is why the Makefile
is updated, so builtin/hook.c depends on hook-list.h. In meson the
header is already a dependency for all builtins, no change required.
The "--allow-unknown-hook-name" flag can be used to bypass this check.
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users running "git hook list" can see which hooks are configured but
have no way to tell at which config scope (local, global, system...)
each hook was defined.
Store the scope from ctx->kvi->scope in the single-pass config callback,
then carry it through the cache to the hook structs, so we can expose it
to users via the "git hook list --show-scope" flag, which mirrors the
existing git config --show-scope convention.
Without the flag the output is unchanged.
The scope is printed as a tab-separated prefix (like "git config --show-scope"),
making it unambiguously machine-parseable even when the friendly name
contains spaces.
Example usage:
$ git hook list --show-scope pre-commit
global linter
local no-leaks
hook from hookdir
Traditional hooks from the hookdir are unaffected by --show-scope since
the config scope concept does not apply to them.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both `name` and `friendly-name` is being used. Standardize on
`friendly-name` for consistency since name is rather generic,
even when used in the hooks namespace.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adrian Ratiu