This concept is very fine, but it makes blame slow
across renames and across branches, so revert it.
There is a better way to do this.
This reverts commit 03d06a8e26f4fbd37800d1e1125c6ecf4c104466.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Finish work started by commit a2f3db2 (although not documented
in commit message) of quoting using quotemeta the filename in
HTTP -content_disposition header.
Just in case filename contains end of line character.
Also use consistent coding style to compute -content_disposition
parameter.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add git_url subroutine, which does what git_param did before commit
a2f3db2f5d, and is used to quote full
URLs, currently only $home_link.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Split validate_input subroutine into validate_pathname which is used
for $project, $file_name and $file_parent parameters, and
validate_refname which is used for $hash, $hash_base, $hash_parent and
$hash_parent_base parameters. Reintroduce validation of $file_name
and $file_parent parameters, removed in a2f3db2f
validate_pathname in addition to what validate_input did checks also
for doubled slashes and NUL character. It does not check if input is
textual hash, and does not check if all characters are from the
following set: [a-zA-Z0-9_\x80-\xff\ \t\.\/\-\+\#\~\%].
validate_refname first check if the input is textual hash, then checks
if it is valid pathname, then checks for invalid characters (according
to git-check-ref-format manpage). It does not check if all charactes
are from the [a-zA-Z0-9_\x80-\xff\ \t\.\/\-\+\#\~\%] set.
We do not have to validate pathnames we got from git.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use "return" instead of "return undef" when subroutine can return, or
always return, non-scalar (list) value.
Other places are left as is.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git_blame2() now has two more columns, "Prev" and "Diff",
before the "Commit" column, as follows:
Prev Diff Commit Line Data
SHA Diff SHA N ...
...
The "Prev" column shows the SHA of the parent commit,
between which this line changed. Clicking on it shows the
blame of the file as of the parent commit, for that line.
So clicking repeatedly on "Prev" would show you the blame
of that file, from the point of view of the changes
of that particular line whose "Prev" you're clicking on.
The "Diff" column shows "Diff" which is a link to blobdiff
between "Prev" and "Commit" commits _for that line_.
So clicking on "Diff" would show you the blobdiff (HTML)
between the parent commit and this commit which changed
that particular line.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In "tree" view, remove redundant "tree" link in the tree
listing. It is identical to simply clicking on the tree
entry itself.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Binary and non-binary blobs:
The "list" table element of tree view is identical
to the "blob" link part of the link table element.
I.e. clicking on "blob" is identical to clicking on
the entry itself.
Thus, eliminate "blob" from being shown -- the user
can get identical result by simply clicking on the
entry itself.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Contents of %diffinfo hash should be quoted upon output but kept
unquoted internally. Later users of this hash expect filenames
to be filenames, not HTML gibberish.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Consider:
http://repo.or.cz/?p=glibc-cvs.git;a=tree;h=2609cb0411389325f4ee2854cc7159756eb0671e;hb=2609cb0411389325f4ee2854cc7159756eb0671e
(click on the funny =__ify file)
We ought to handle anything in filenames and I actually see no reason why
we don't, modulo very little missing escaping that this patch hopefully
also fixes.
I have also made esc_param() escape [?=&;]. Not escaping [&;] was downright
buggy and [?=] just feels better escaped. ;-) YMMV.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It would just give HEAD snapshot instead of one of the particular tree.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As it is now, that array was never used because the customurl accessor was
broken and ''unless @url_list'' never happenned.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The link forgot to have hb parameter and the resulting tree view
failed to show the navbar for that commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Based on talk on the IRC with Junio some evenings ago, I've updated the
path showing in tree view to look better and sent updated patches
privately, but it seems the old version ended up being used, so here's
the new one again.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"head" is a reference in refs/heads/, while those labels mean HEAD,
the latest revision of the default branch.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I don't have much preference either way and as far as I'm concerned, it may
go the other way as well. Consistency is what is important.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Navigation bars in various views were empty or missed important items that
should have been there, e.g. getting a snapshot in tree view or log of
ancestry in commit view...
This feeble patch attempts to consolidate that.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Current projects list is oriented on easily getting "what's new"
information. But when already using gitweb as an interface to something,
I personally find myself to _much_ more frequently wanting to rather
see "what's in" (or "what's new in") and it's quite annoying to have to
go through the summary page (which is also rather expensive to generate)
just to get there.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch fixes two things - links to all path elements except the last
one were broken since gitweb does not like the trailing slash in them, and
the root tree was not reachable from the subdirectory view.
To compensate for the one more slash in the front, the trailing slash is
not there anymore. ;-) I don't care if it stays there though.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When adding a / to the URL, git should display the corresponding
tree object, but it has to remove the / first.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git_get_refs_list always return reference to list (and reference to
hash which we ignore), so $taglist (in git_tags) and $headlist (in
git_heads) are always defined, but @$taglist / @$headlist might be
empty. Replaced incorrect "if (defined @$taglist)" with
"if (@$taglist)" in git_tags and respectively in git_heads.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git_get_refs_list do also work of git_get_references, to avoid
calling git-peek-remote twice. Change meaning of git_get_refs_list
meaning: it is now type, and not a full path, e.g. we now use
git_get_refs_list("heads") instead of former
git_get_refs_list("refs/heads").
Modify git_summary to use only one call to git_get_refs_list instead
of one call to git_get_references and two to git_get_refs_list.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of trying to read info/refs file, which might not be present
(we did fallback to git-ls-remote), always use git-peek-remote in
git_get_references.
It is preparation for git_get_refs_info to also return references
info. We should not use info/refs for git_get_refs_info as the
repository is not served for http-fetch clients.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Require that project (repository) is given for all actions except
project_list, project_index and opml.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now the following types of path based URLs are supported:
* project overview (summary) page of project
* project/branch shortlog of branch
* project/branch:file file in branch, blob_plain view
* project/branch:dir/ directory listing of dir in branch, tree view
The following shortcuts works (see explanation below):
* project/branch: directory listing of branch, main tree view
* project/:file file in HEAD (raw)
* project/:dir/ directory listing of dir in HEAD
* project/: directory listing of project's HEAD
We use ':' as separator between branch (ref) name and file name
(pathname) because valid branch (ref) name cannot have ':' inside.
This limit applies to branch name only. This allow for hierarchical
branches e.g. topic branch 'topic/subtopic', separate remotes
tracking branches e.g. 'refs/remotes/origin/HEAD', and discriminate
between head (branch) and tag with the same name.
Empty branch should be interpreted as HEAD.
If pathname (the part after ':') ends with '/', we assume that pathname
is name of directory, and we want to show contents of said directory
using "tree" view. If pathname is empty, it is equivalent to '/' (top
directory).
If pathname (the part after ':') does not end with '/', we assume that
pathname is name of file, and we show contents of said file using
"blob_plain" view.
Pathname is stripped of leading '/', so we can use ':/' to separate
branch from pathname. The rationale behind support for PATH_INFO based
URLs was to support project web pages for small projects: just create
an html branch and then use an URL like
http://nowhere.com/gitweb.cgi/project.git/html:/index.html
The ':/' syntax allow for working links between .html files served
in such way, e.g. <a href="main.html"> link inside "index.html"
would get
http://nowhere.com/gitweb.cgi/project.git/html:/main.html.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix getting correct mimetype for "blob_plain" view for files which have
multiple extensions, e.g. foo.1.html; now only the last extension
is used to find mimetype.
Noticed by Martin Waitz.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently it is possible to give any string ending with a number as
page. -1 for example is quite bad (error log shows probably 100
warnings).
Signed-off-by: Junio C Hamano <junkio@cox.net>
$export_ok: If this variable evaluates to true it is checked
if a file with this name exists in the repository. If it
does not exist the repository cannot be viewed from gitweb.
(Similar to git-daemon-export-ok for git-daemon).
$strict_export: If this variable evaluates to true only
repositories listed on the project-list-page of gitweb can
be accessed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Perl spit out a varning when "blob" or "blob_plain" actions were
used without a $hash parameter.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now three types of path based URLs are supported:
gitweb.cgi/project.git
gitweb.cgi/project.git/branch
gitweb.cgi/project.git/branch/filename
The first one (show project summary) was already supported for a long time
now. The other two are new: they show the shortlog of a branch or
the plain file contents of some file contained in the repository.
This is especially useful to support project web pages for small
projects: just create an html branch and then use an URL like
gitweb.cgi/project.git/html/index.html.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add link to "project_index" view as [TXT] beside link to "opml" view,
(which is marked by [OPML]) to "project_list" page.
While at it add alternate links for "opml" and "project_list" to HTML
header for "project_list" view.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make it possible to use href() subroutine to generate link with
query string which does not include project ('p') parameter.
href() used to add project=$project to its parameters, if it
was not set (to be more exact if $params{'project'} was false).
Now you can pass "project => undef" if you don't want for href()
to add project parameter to query string in the generated link.
Links to "project_list", "project_index" and "opml" (all related
to list of all projects/all git repositories) doesn't need project
parameter. Moreover "project_list" is default view (action) if
project ('p') parameter is not set, just like "summary" is default
view (action) if project is set; project list served as a kind
of "home" page for gitweb instalation, and links to "project_list"
view were done without specyfying it as an action.
Convert remaining links (except $home_link and anchor links)
to use href(); this required adding 'order => "o"' to @mapping
in href(). This finishes consolidation of URL generation.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add git_project_index, which generates index.aux file that can be used
as a source of projects list, instead of generating projects list from
a directory. Using file as a source of projects list allows for some
projects to be not present in gitweb main (project_list) page, and/or
correct project owner info. And is probably faster.
Additionally it can be used to get the list of all available repositories
for scripts (in easily parseable form).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is in response to Linus's work on packed refs. Additionally it
makes gitweb work with symrefs, too.
Do not parse refs by hand, using File::Find and reading individual
heads to get hash of reference, but use git-peek-remote output
instead. Assume that the hash for deref (with ^{}) always follows hash
for ref, and that we have derefs only for tag objects; this removes
call to git_get_type (and git-cat-file -t invocation) for tags, which
speeds "summary" and "tags" views generation, but might slow generation
of "heads" view a bit. For now, we do not save and use the deref hash.
Remove git_get_hash_by_ref while at it, as git_get_refs_list was the
only place it was used.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier code to get list of projects when $projects_list is a
directory (e.g. when it is equal to $projectroot) had a hardcoded flat
(one level) list of directories. Allow for projects to be in
subdirectories also for $projects_list being a directory by using
File::Find.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git_history output is now divided into pages, like git_shortlog,
git_tags and git_heads output. As whole git-rev-list output is now
read into array before writing anything, it allows for better
signaling of errors.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As pickaxe search (selected using undocumented 'pickaxe:' operator in
search query) is resource consuming, allow to turn it on/off using
feature meachanism. Turned on by default, for historical reasons.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Divide page path into directories, so that each part of path links to
the "tree" view of the $hash_base (or HEAD, if $hash_base is not set)
version of the directory.
If the entity is blob, final part (basename) links to $hash_base or
HEAD revision of the "raw" blob ("blob_plain" view). If the entity is
tree, link to the "tree" view.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change the name of diff to parent (current commit to one of parents)
link in "commit" view (git_commit subroutine) from "commitdiff" to
"diff". Let's leave "commitdiff" for equivalent of git-show, or
git-diff-tree with one revision, i.e. diff for a given commit to its
parent (parents).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extend parse_difftree_raw_line to save commit info from when
git-diff-tree is given only one <tree-ish>, for example when fed
from git-rev-list using --stdin option.
git-diff-tree outputs a line with the commit ID when applicable.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Luben Tuikov