kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Junio C Hamano	3831132ace	ci/install-depends: attempt to fix "brew cask" stuff We run "git pull" against "$cask_repo"; clarify that we are expecting not to have any of our own modifications and running "git pull" to merely update, by passing "--ff-only" on the command line. Also, the "brew cask install" command line triggers an error message that says: Error: Calling brew cask install is disabled! Use brew install [--cask] instead. In addition, "brew install caskroom/cask/perforce" step triggers an error that says: Error: caskroom/cask was moved. Tap homebrew/cask instead. Attempt to see if blindly following the suggestion in these error messages gets us into a better shape. Signed-off-by: Junio C Hamano <gitster@pobox.com>	4 years ago
Junio C Hamano	92bf1b6067	ci: avoid `set-env` construct in print-test-failures.sh Imitating `cac42e47` (ci: avoid using the deprecated `set-env` construct, 2020-11-07), avoid deprecated ::set-env and use the recommended alternative instead in print-test-failures.sh Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	4 years ago
Johannes Schindelin	4463ce75b7	ci: do not skip tagged revisions in GitHub workflows When `master` is tagged, and then both `master` and the tag are pushed, Travis CI will happily build both. That is a waste of energy, which is why we skip the build for `master` in that case. Our GitHub workflow is also triggered by tags. However, the run would fail because the `windows-test` jobs are _not_ skipped on tags, but the `windows-build` job _is skipped (and therefore fails to upload the build artifacts needed by the test jobs). In addition, we just added logic to our GitHub workflow that will skip runs altogether if there is already a successful run for the same commit or at least for the same tree. Let's just change the GitHub workflow to no longer specifically skip tagged revisions. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	4 years ago
Johannes Schindelin	ef60e9f74b	ci: stop linking built-ins to the dashed versions Since `e4597aae65` (run test suite without dashed git-commands in PATH, 2009-12-02), we stopped running our tests with `git-foo` binaries found at the top-level directory of a freshly built source tree; instead we have placed only `git` and selected `git-foo` commands that must be on `$PATH` in `bin-wrappers/` and prepended that `bin-wrappers/` to the `PATH` used in the test suite. We did that to catch the tests and scripted Git commands that still try to use the dashed form. Since CI jobs will not install the built Git to anywhere, and the hardlinks we make at the top-level of the source tree for `git-add` and friends are not even used during tests, they are pure waste of resources these days. Thanks to the newly invented `SKIP_DASHED_BUILT_INS` knob, we can now skip creating these links in the source tree. So let's do that. Note that this change introduces a subtle change of behavior: when Git's `cmd_main()` calls `setup_path()`, it inserts the value of `GIT_EXEC_PATH` (defaulting to `<prefix>/libexec/git-core`) at the beginning of the environment variable `PATH`. This is necessary to find e.g. scripted commands that are installed in that location. For the purposes of Git's test suite, the `bin-wrappers/` scripts override `GIT_EXEC_PATH` to point to the top-level directory of the source code. In other words, if a scripted command had used a dashed invocation of a built-in Git command, it would not have been caught previously, which is fixed by this change. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	4 years ago
brian m. carlson	8a06d56ccb	ci: run tests with SHA-256 Now that we have Git supporting SHA-256, we'd like to make sure that we don't regress that state. Unfortunately, it's easy to do so, so to help, let's add code to run one of our CI jobs with SHA-256 as the default hash. This will help us detect any problems that may occur. We pick the linux-clang job because it's relatively fast and the linux-gcc job already runs the testsuite twice. We want our tests to run as fast as possible, so we wouldn't want to add a third run to the linux-gcc job. To make sure we properly exercise the code, let's run the tests in the default mode (SHA-1) first and then run a second time with SHA-256. We explicitly specify SHA-1 for the first run so that if we change the default in the future, we make sure to test both cases. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
SZEDER Gábor	60e47f6773	ci: use absolute PYTHON_PATH in the Linux jobs In our test suite, when 'git p4' invokes a Git command as a subprocesses, then it should run the 'git' binary we are testing. Unfortunately, this is not the case in the 'linux-clang' and 'linux-gcc' jobs on Travis CI, where 'git p4' runs the system '/usr/bin/git' instead. Travis CI's default Linux image includes 'pyenv', and all Python invocations that involve PATH lookup go through 'pyenv', e.g. our 'PYTHON_PATH=$(which python3)' sets '/opt/pyenv/shims/python3' as PYTHON_PATH, which in turn will invoke '/usr/bin/python3'. Alas, the 'pyenv' version included in this image is buggy, and prepends the directory containing the Python binary to PATH even if that is a system directory already in PATH near the end. Consequently, 'git p4' in those jobs ends up with its PATH starting with '/usr/bin', and then runs '/usr/bin/git'. So use the absolute paths '/usr/bin/python{2,3}' explicitly when setting PYTHON_PATH in those Linux jobs to avoid the PATH lookup and thus the bogus 'pyenv' from interfering with our 'git p4' tests. Don't bother with special-casing Travis CI: while this issue doesn't affect the corresponding Linux jobs on GitHub Actions, both CI systems use Ubuntu LTS-based images, so we can safely rely on these Python paths. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Đoàn Trần Công Danh	71800d31b5	ci/config: correct instruction for CI preferences From `e76eec3554` (ci: allow per-branch config for GitHub Actions, 2020-05-07), we started to allow contributors decide which branch they want to build with GitHub Actions by checking for a file named "ci/config/allow-ref". In order to assist those contributors, we provided a sample in "ci/config/allow-refs.sample", and instructed them to drop the ".sample", then commit that file to their repository. We've misspelt the filename in that change. Let's fix the spelling. While we're at it, also instruct our contributors introduce that new file to Git before commit, in case of they've never told Git before. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Junio C Hamano	4024295568	Revert "ci: add a problem matcher for GitHub Actions" This reverts commit 676eb0c1ce0d380478eb16bdc5a3f2a7bc01c1d2; as we will be reverting the change to show these extra output tokens under bash, the pattern would not match anything. Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Jeff King	e76eec3554	ci: allow per-branch config for GitHub Actions Depending on the workflows of individual developers, it can either be convenient or annoying that our GitHub Actions CI jobs are run on every branch. As an example of annoying: if you carry many half-finished work-in-progress branches and rebase them frequently against master, you'd get tons of failure reports that aren't interesting (not to mention the wasted CPU). This commit adds a new job which checks a special branch within the repository for CI config, and then runs a shell script it finds there to decide whether to skip the rest of the tests. The default will continue to run tests for all refs if that branch or script is missing. There have been a few alternatives discussed: One option is to carry information in the commit itself about whether it should be tested, either in the tree itself (changing the workflow YAML file) or in the commit message (a "[skip ci]" flag or similar). But these are frustrating and error-prone to use: - you have to manually apply them to each branch that you want to mark - it's easy for them to leak into other workflows, like emailing patches We could likewise try to get some information from the branch name. But that leads to debates about whether the default should be "off" or "on", and overriding still ends up somewhat awkward. If we default to "on", you have to remember to name your branches appropriately to skip CI. And if "off", you end up having to contort your branch names or duplicate your pushes with an extra refspec. By comparison, this commit's solution lets you specify your config once and forget about it, and all of the data is off in its own ref, where it can be changed by individual forks without touching the main tree. There were a few design decisions that came out of on-list discussion. I'll summarize here: - we could use GitHub's API to retrieve the config ref, rather than a real checkout (and then just operate on it via some javascript). We still have to spin up a VM and contact GitHub over the network from it either way, so it ends up not being much faster. I opted to go with shell to keep things similar to our other tools (and really could implement allow-refs in any language you want). This also makes it easy to test your script locally, and to modify it within the context of a normal git.git tree. - we could keep the well-known refname out of refs/heads/ to avoid cluttering the branch namespace. But that makes it awkward to manipulate. By contrast, you can just "git checkout ci-config" to make changes. - we could assume the ci-config ref has nothing in it except config (i.e., a branch unrelated to the rest of git.git). But dealing with orphan branches is awkward. Instead, we'll do our best to efficiently check out only the ci/config directory using a shallow partial clone, which allows your ci-config branch to be just a normal branch, with your config changes on top. - we could provide a simpler interface, like a static list of ref patterns. But we can't get out of spinning up a whole VM anyway, so we might as well use that feature to make the config as flexible as possible. If we add more config, we should be able to reuse our partial-clone to set more outputs. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Johannes Schindelin	f72f328bc5	ci: let GitHub Actions upload failed tests' directories Arguably, CI builds' most important task is to not only identify regressions, but to make it as easy as possible to investigate what went wrong. In that light, we will want to provide users with a way to inspect the tests' output as well as the corresponding directories. This commit adds build steps that are only executed when tests failed, uploading the relevant information as build artifacts. These artifacts can then be downloaded by interested parties to diagnose the failures more efficiently. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Johannes Schindelin	676eb0c1ce	ci: add a problem matcher for GitHub Actions With this patch, test failures will be annotated with a helpful, clickable message in GitHub Actions. For details, see https://github.com/actions/toolkit/blob/master/docs/problem-matchers.md Note: we need to set `TEST_SHELL_PATH` to Bash so that the problem matcher is fed a file and line number for each test failure. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Johannes Schindelin	4fef6321a5	ci: run gem with sudo to install asciidoctor In a later patch, we will run Documentation job in GitHub Actions. The job will run without elevated permission. Run `gem` with `sudo` to elevate permission in order to be able to install to system location. This will also keep this installation in-line with other installation in our Linux system for CI. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> [Danh: reword commit message] Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Đoàn Trần Công Danh	61432dd630	ci: explicit install all required packages In a later patch, we will support GitHub Action. Explicitly install all of our build dependencies on Linux. Since GitHub Action's Linux VM hasn't installed our build dependencies. And there're no harm to reinstall them (in Travis) Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Johannes Schindelin	87b68db3ac	ci: fix the `jobname` of the `GETTEXT_POISON` job In `6cdccfce1e` (i18n: make GETTEXT_POISON a runtime option, 2018-11-08), the `jobname` was adjusted to have the `GIT_TEST_` prefix, but that prefix makes no sense in this context. Co-authored-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Đoàn Trần Công Danh	855c158e81	ci/lib: set TERM environment variable if not exist GitHub Action doesn't set TERM environment variable, which is required by "tput". Fallback to dumb if it's not set. Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Johannes Schindelin	a3f2eec862	ci/lib: allow running in GitHub Actions For each CI system we support, we need a specific arm in that if/else construct in ci/lib.sh. Let's add one for GitHub Actions. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Johannes Schindelin	5127e8cf7a	ci/lib: if CI type is unknown, show the environment variables This should help with adding new CI-specific if-else arms. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Đoàn Trần Công Danh	e0f8690dee	travis: build and test on Linux with musl libc and busybox Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Đoàn Trần Công Danh	c3bc449eb1	ci/linux32: libify install-dependencies step In a later patch, we will add new Travis Job for linux-musl. Most of other code in this file could be reuse for that job. Move the code to install dependencies to a common script. Should we add new CI system that can run directly in container, we can reuse this script for installation step. Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Đoàn Trần Công Danh	5a33f541dd	ci: refactor docker runner script We will support alpine check in docker later in this series. While we're at it, tell people to run as root in podman, if podman is used as drop-in replacement for docker, because podman will map host-user to container's root, therefore, mapping their permission. Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Đoàn Trần Công Danh	2bd1e2d273	ci/linux32: parameterise command to switch arch In a later patch, the remaining of this command will be re-used for the CI job for linux with musl libc. Allow customisation of the emulator, now. Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Đoàn Trần Công Danh	ffce2ebdd9	ci/lib-docker: preserve required environment variables We're using "su -m" to preserve environment variables in the shell run by "su". But, that options will be ignored while "-l" (aka "--login") is specified in util-linux and busybox's su. In a later patch this script will be reused for checking Git for Linux with musl libc on Alpine Linux, Alpine Linux uses "su" from busybox. Since we don't have interest in all environment variables, pass only those necessary variables to the inner script. Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Garima Singh	d5b873c832	commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag Add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag to the test setup suite in order to toggle writing Bloom filters when running any of the git tests. If set to true, we will compute and write Bloom filters every time a test calls `git commit-graph write`, as if the `--changed-paths` option was passed in. The test suite passes when GIT_TEST_COMMIT_GRAPH and GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS are enabled. Helped-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
SZEDER Gábor	d2fae19e0f	ci: make MAKEFLAGS available inside the Docker container in the Linux32 job Once upon a time we ran 'make --jobs=2 ...' to build Git, its documentation, or to apply Coccinelle semantic patches. Then commit `eaa62291ff` (ci: inherit --jobs via MAKEFLAGS in run-build-and-tests, 2019-01-27) came along, and started using the MAKEFLAGS environment variable to centralize setting the number of parallel jobs in 'ci/libs.sh'. Alas, it forgot to update 'ci/run-linux32-docker.sh' to make MAKEFLAGS available inside the Docker container running the 32 bit Linux job, and, consequently, since then that job builds Git sequentially, and it ignores any Makefile knobs that we might set in MAKEFLAGS (though we don't set any for the 32 bit Linux job at the moment). So update the 'docker run' invocation in 'ci/run-linux32-docker.sh' to make MAKEFLAGS available inside the Docker container as well. Set CC=gcc for the 32 bit Linux job, because that's the compiler installed in the 32 bit Linux Docker image that we use (Travis CI nowadays sets CC=clang by default, but clang is not installed in this image). Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
SZEDER Gábor	6bb40ed20a	ci: use python3 in linux-gcc and osx-gcc and python2 elsewhere Python2 reached end of life, and we have been preparing our Python scripts to work with Python3. 'git p4', the main in-tree user of Python, has just received a number of compatibility updates. Our other notable Python script 'contrib/svn-fe/svnrdump_sim.py' is only used in 't9020-remote-svn.sh', and is apparently already compatible with both Python2 and 3. Our CI jobs currently only use Python2. We want to make sure that these Python scripts do indeed work with Python3, and we also want to make sure that these scripts keep working with Python2 as well, for the sake of some older LTS/Enterprise setups. Therefore, pick two jobs and use Python3 there, while leaving other jobs to still stick to Python2 for now. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Johannes Schindelin	5ed9fc3fc8	ci: prevent `perforce` from being quarantined The most recent Azure Pipelines macOS agents enable what Apple calls "System Integrity Protection". This makes `p4d -V` hang: there is some sort of GUI dialog waiting for the user to acknowledge that the copied binaries are legit and may be executed, but on build agents, there is no user who could acknowledge that. Let's ask Homebrew specifically to _not_ quarantine the Perforce binaries. Helped-by: Aleksandr Chebotov Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Johannes Schindelin	30183894ea	ci: ignore rubygems warning in the "Documentation" job A recent update in the Linux VM images used by Azure Pipelines surfaced a new problem in the "Documentation" job. Apparently, this warning appears 396 times on `stderr` when running `make doc`: /usr/lib/ruby/vendor_ruby/rubygems/defaults/operating_system.rb:10: warning: constant Gem::ConfigMap is deprecated This problem was already reported to the `rubygems` project via https://github.com/rubygems/rubygems/issues/3068. As there is nothing Git can do about this warning, and as the "Documentation" job reports this warning as a failure, let's just silence it and move on. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Johannes Schindelin	b2627cc3d4	ci: include the built-in `git add -i` in the `linux-gcc` job This job runs the test suite twice, once in regular mode, and once with a whole slew of `GIT_TEST_*` variables set. Now that the built-in version of `git add --interactive` is feature-complete, let's also throw `GIT_TEST_ADD_I_USE_BUILTIN` into that fray. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
SZEDER Gábor	176441bfb5	ci: build Git with GCC 9 in the 'osx-gcc' build job Our 'osx-gcc' build job on Travis CI relied on GCC 8 being installed (but not linked) in the image we use [1]. Alas, since the last update of this image a few days ago this is not the case anymore, and now it contains GCC 9 (installed and linked) instead of GCC 8. The results are failed 'osx-gcc' jobs, because they can't find the 'gcc-8' command [2]. Let's move on to use GCC 9, with hopefully better error reporting and improved -Wfoo flags and what not. On Travis CI this has the benefit that we can spare a few seconds while installing dependencies, because it already comes pre-installed, at least for now. The Azure Pipelines OSX image doesn't include GCC, so we have to install it ourselves anyway, and then we might as well install the newer version. In a vain attempt I tried to future-proof this a bit: - Install 'gcc@9' specifically, so we'll still get what we want even after GCC 10 comes out, and the "plain" 'gcc' package starts to refer to 'gcc@10'. - Run both 'brew install gcc@9' and 'brew link gcc@9'. If 'gcc@9' is already installed and linked, then both commands are noop and exit with success. But as we saw in the past, sometimes the image contains the expected GCC package installed but not linked, so maybe it will happen again in the future as well. In that case 'brew install' is still a noop, and instructs the user to run 'brew link' instead, so that's what we'll do. And if 'gcc@9' is not installed, then 'brew install' will install it, and the subsequent 'brew link' becomes a noop. An additional benefit of this patch is that from now on we won't unnecessarily install GCC and its dependencies in the 'osx-clang' jobs on Azure Pipelines. [1] `7d4733c501` (ci: fix GCC install in the Travis CI GCC OSX job, 2019-10-24) [2] https://travis-ci.org/git/git/jobs/615442297#L333 Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
SZEDER Gábor	a85efb5985	t5608-clone-2gb.sh: turn GIT_TEST_CLONE_2GB into a bool The GIT_TEST_CLONE_2GB environment variable is only ever checked with 'test -z' in 't5608-clone-2gb.sh', so any non-empty value is interpreted as "yes, run these expensive tests", even 'GIT_TEST_CLONE_2GB=NoThanks'. Similar GIT_TEST_* environment variables have already been turned into bools in `3b072c577b` (tests: replace test_tristate with "git env--helper", 2019-06-21), so let's turn GIT_TEST_CLONE_2GB into a bool as well, to follow suit. Our CI builds set GIT_TEST_CLONE_2GB=YesPlease, so adjust them accordingly, thus removing the last 'YesPlease' from our CI scripts. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Junio C Hamano	0dbc4a0edf	ci(osx): update homebrew-cask repository with less noise The OSX CI build procedure updates the homebrew-cask repository before attempting to install perforce again, after seeing an installation failure. This involves a "git pull" that by default computes and outputs diffstat, which would only grow as the time goes by and the repository cast in stone in the CI build image becomes more and more stale relative to the upstream repository in the outside world. Suppress the diffstat to both save cycles to generate it, and strain on the eyeballs to skip it. Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
SZEDER Gábor	7d4733c501	ci: fix GCC install in the Travis CI GCC OSX job A few days ago Travis CI updated their existing OSX images, including the Homebrew database in the xcode10.1 OSX image that we use. Since then installing dependencies in the 'osx-gcc' job fails when it tries to link gcc@8: + brew link gcc@8 Error: No such keg: /usr/local/Cellar/gcc@8 GCC8 is still installed but not linked to '/usr/local' in the updated image, as it was before this update, but now we have to link it by running 'brew link gcc'. So let's do that then, and fall back to linking gcc@8 if it doesn't, just to be sure. Our builds on Azure Pipelines are unaffected by this issue. The OSX image over there doesn't contain the gcc@8 package, so we have to 'brew install' it, which already takes care of linking it to '/usr/local'. After that the 'brew link gcc' command added by this patch fails, but the \|\|-chained fallback 'brew link gcc@8' command succeeds with an "already linked" warning. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Johannes Schindelin	0eb3671ed9	ci(osx): use new location of the `perforce` cask The Azure Pipelines builds are failing for macOS due to a change in the location of the perforce cask. The command outputs the following error: + brew install caskroom/cask/perforce Error: caskroom/cask was moved. Tap homebrew/cask-cask instead. So let's try to call `brew cask install perforce` first (which is what that error message suggests, in a most round-about way). Prior to `672f51cb` we used to install the 'perforce' package with 'brew install perforce' (note: no 'cask' in there). The justification for `672f51cb` was that the command 'brew install perforce' simply stopped working, after Homebrew folks decided that it's better to move the 'perforce' package to a "cask". Their justification for this move was that 'brew install perforce' "can fail due to a checksum mismatch ...", and casks can be installed without checksum verification. And indeed, both 'brew cask install perforce' and 'brew install caskroom/cask/perforce' printed something along the lines of: ==> No checksum defined for Cask perforce, skipping verification It is unclear why `672f51cb` used 'brew install caskroom/cask/perforce' instead of 'brew cask install perforce'. It appears (by running both commands on old Travis CI macOS images) that both commands worked all the same already back then. In any case, as the error message at the top of this commit message shows, 'brew install caskroom/cask/perforce' has stopped working recently, but 'brew cask install perforce' still does, so let's use that. CI servers are typically fresh virtual machines, but not always. To accommodate for that, let's try harder if `brew cask install perforce` fails, by specifically pulling the latest `master` of the `homebrew-cask` repository. This will still fail, of course, when `homebrew-cask` falls behind Perforce's release schedule. But once it is updated, we can now simply re-run the failed jobs and they will pick up that update. As for updating `homebrew-cask`: the beginnings of automating this in https://dev.azure.com/gitgitgadget/git/_build?definitionId=11&_a=summary will be finished once the next Perforce upgrade comes around. Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
Johannes Schindelin	411e4f4735	ci: run `hdr-check` as part of the `Static Analysis` job Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
SZEDER Gábor	c46ebc2496	travis-ci: do not skip successfully tested trees in debug mode Travis CI offers shell access to its virtual machine environment running the build jobs, called "debug mode" [1]. After restarting a build job in debug mode and logging in, the first thing I usually do is to install dependencies, i.e. run './ci/install-dependencies.sh'. This works just fine when I restarted a failed build job in debug mode. However, after restarting a successful build job in debug mode our CI scripts get all clever, and exit without doing anything useful, claiming that "This commit's tree has already been built and tested successfully" [2]. Our CI scripts are right, and we do want to skip building and testing already known good trees in "regular" CI builds. In debug mode, however, this is a nuisiance, because one has to delete the cache (or at least the 'good-trees' file in the cache) to proceed. Let's update our CI scripts, in particular the common 'ci/lib.sh', to not skip previously successfully built and tested trees in debug mode, so all those scripts will do what there were supposed to do even when a successful build job was restarted in debug mode. [1] https://docs.travis-ci.com/user/running-build-in-debug-mode/ [2] `9cc2c76f5e` (travis-ci: record and skip successfully built trees, 2017-12-31) Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
brian m. carlson	f6461b82b9	Documentation: fix build with Asciidoctor 2 Our documentation toolchain has traditionally been built around DocBook 4.5. This version of DocBook is the last DTD-based version of DocBook. In 2009, DocBook 5 was introduced using namespaces and its syntax is expressed in RELAX NG, which is more expressive and allows a wider variety of syntax forms. Asciidoctor, one of the alternatives for building our documentation, moved support for DocBook 4.5 out of core in its recent 2.0 release and now only supports DocBook 5 in the main release. The DocBoook 4.5 converter is still available as a separate component, but this is not available in most distro packages. This would not be a problem but for the fact that we use xmlto, which is still stuck in the DocBook 4.5 era. xmlto performs DTD validation as part of the build process. This is not problematic for DocBook 4.5, which has a valid DTD, but it clearly cannot work for DocBook 5, since no DTD can adequately express its full syntax. In addition, even if xmlto did support RELAX NG validation, that wouldn't be sufficient because it uses the libxml2-based xmllint to do so, which has known problems with validating interleaves in RELAX NG. Fortunately, there's an easy way forward: ask Asciidoctor to use its DocBook 5 backend and tell xmlto to skip validation. Asciidoctor has supported DocBook 5 since v0.1.4 in 2013 and xmlto has supported skipping validation for probably longer than that. We also need to teach xmlto how to use the namespaced DocBook XSLT stylesheets instead of the non-namespaced ones it usually uses. Normally these stylesheets are interchangeable, but the non-namespaced ones have a bug that causes them not to strip whitespace automatically from certain elements when namespaces are in use. This results in additional whitespace at the beginning of list elements, which is jarring and unsightly. We can do this by passing a custom stylesheet with the -x option that simply imports the namespaced stylesheets via a URL. Any system with support for XML catalogs will automatically look this URL up and reference a local copy instead without us having to know where this local copy is located. We know that anyone using xmlto will already have catalogs set up properly since the DocBook 4.5 DTD used during validation is also looked up via catalogs. All major Linux distributions distribute the necessary stylesheets and have built-in catalog support, and Homebrew does as well, albeit with a requirement to set an environment variable to enable catalog support. On the off chance that someone lacks support for catalogs, it is possible for xmlto (via xmllint) to download the stylesheets from the URLs in question, although this will likely perform poorly enough to attract attention. People still have the option of using the prebuilt documentation that we ship, so happily this should not be an impediment. Finally, we need to filter out some messages from other stylesheets that occur when invoking dblatex in the CI job. This tool strips namespaces much like the unnamespaced DocBook stylesheets and prints similar messages. If we permit these messages to be printed to standard error, our documentation CI job will fail because we check standard error for unexpected output. Due to dblatex's reliance on Python 2, we may need to revisit its use in the future, in which case this problem may go away, but this can be delayed until a future patch. The final message we filter is due to libxslt on modern Debian and Ubuntu. The patch which they use to implement reproducible ID generation also prints messages about the ID generation. While this doesn't affect our current CI images since they use Ubuntu 16.04 which lacks this patch, if we upgrade to Ubuntu 18.04 or a modern Debian, these messages will appear and, like the above messages, cause a CI failure. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
SZEDER Gábor	3960290675	ci: restore running httpd tests Once upon a time GIT_TEST_HTTPD was a tristate variable and we exported 'GIT_TEST_HTTPD=YesPlease' in our CI scripts to make sure that we run the httpd tests in the Linux Clang and GCC build jobs, or error out if they can't be run for any reason [1]. Then `3b072c577b` (tests: replace test_tristate with "git env--helper", 2019-06-21) came along, turned GIT_TEST_HTTPD into a bool, but forgot to update our CI scripts accordingly. So, since GIT_TEST_HTTPD is set explicitly, but its value is not one of the standardized true values, our CI jobs have been simply skipping the httpd tests in the last couple of weeks. Set 'GIT_TEST_HTTPD=true' to restore running httpd tests in our CI jobs. [1] `a1157b76eb` (travis-ci: set GIT_TEST_HTTPD in 'ci/lib-travisci.sh', 2017-12-12) Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	5 years ago
SZEDER Gábor	fb9d7431cf	travis-ci: build with GCC 4.8 as well C99 'for' loop initial declaration, i.e. 'for (int i = 0; i < n; i++)', is not allowed in Git's codebase yet, to maintain compatibility with some older compilers. Our Travis CI builds used to catch 'for' loop initial declarations, because the GETTEXT_POISON job has always built Git with the default 'cc', which in Travis CI's previous default Linux image (based on Ubuntu 14.04 Trusty) is GCC 4.8, and that GCC version errors out on this construct (not only with DEVELOPER=1, but with our default CFLAGS as well). Alas, that's not the case anymore, becase after 14.04's EOL Travis CI's current default Linux image is based on Ubuntu 16.04 Xenial [1] and its default 'cc' is now GCC 5.4, which, just like all later GCC and Clang versions, simply accepts this construct, even if we don't explicitly specify '-std=c99'. Ideally we would adjust our CFLAGS used with DEVELOPER=1 to catch this undesired construct already when contributors build Git on their own machines. Unfortunately, however, there seems to be no compiler option that would catch only this particular construct without choking on many other things, e.g. while a later compiler with '-std=c90' and/or '-ansi' does catch this construct, it can't build Git because of several screenfulls of other errors. Add the 'linux-gcc-4.8' job to Travis CI, in order to build Git with GCC 4.8, and thus to timely catch any 'for' loop initial declarations. To catch those it's sufficient to only build Git with GCC 4.8, so don't run the test suite in this job, because 'make test' takes rather long [2], and it's already run five times in other jobs, so we wouldn't get our time's worth. [1] The Azure Pipelines builds have been using Ubuntu 16.04 images from the start, so I belive they never caught 'for' loop initial declarations. [2] On Travis CI 'make test' alone would take about 9 minutes in this new job (without running httpd, Subversion, and P4 tests). For comparison, starting the job and building Git with GCC 4.8 takes only about 2 minutes. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
SZEDER Gábor	37a2e35395	ci/lib.sh: update a comment about installed P4 and Git-LFS versions A comment in 'ci/lib.sh' claims that the "OS X build installs the latest available versions" of P4 and Git-LFS, but since `f2f47150` ("ci: don't update Homebrew", 2019-07-03) that's no longer the case, as it will install the versions which were recorded in the image's Homebrew database when the image was created. Update this comment accordingly. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
SZEDER Gábor	af8ed04778	ci: disable Homebrew's auto cleanup Lately Homebrew learned to automagically clean up information about outdated packages during other 'brew' commands, which might be useful for the avarage user, but is a waste of time in CI build jobs, because the next build jobs will start from the exact same image containing the same outdated packages anyway. Export HOMEBREW_NO_INSTALL_CLEANUP=1 to disable this auto cleanup feature, shaving off about 20-30s from the time needed to install dependencies in our macOS build jobs on Travis CI. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
SZEDER Gábor	f2f4715033	ci: don't update Homebrew Lately our GCC macOS build job on Travis CI has been erroring out while installing dependencies with: +brew link gcc@8 Error: No such keg: /usr/local/Cellar/gcc@8 The command "ci/install-dependencies.sh" failed and exited with 1 during . Now, while gcc@8 is still pre-installed (but not linked) and would be perfectly usable in the Travis CI macOS image we use [1], it's at version 8.2. However, when installing dependencies we first explicitly run 'brew update', which spends over two minutes to update itself and information about the available packages, and it learns about GCC 8.3. After that point gcc@8 exclusively refers to v8.3, and, unfortunately, 'brew' is just too dumb to be able to do anything with the still installed 8.2 package, and the subsequent 'brew link gcc@8' fails. (Even 'brew uninstall gcc@8' fails with the same error!) Don't run 'brew update' to keep the already installed GCC 8.2 'brew link'-able. Note that in addition we have to 'export HOMEBREW_NO_AUTO_UPDATE=1' first, because 'brew' is so very helpful that it would implicitly run update for us on the next 'brew install <pkg>' otherwise. Disabling 'brew update' has additional benefits: - It shaves off 2-3mins from the ~4mins currently spent on installing dependencies, and the macOS build jobs have always been prone to exceeding the time limit on Travis CI. - Our builds won't suddenly break because of the occasional Homebrew breakages [2]. The drawback is that we'll be stuck with slightly older versions of the packages that we install via Homebrew (Git-LFS 2.5.2 and Perforce 2018.1; they are currently at 2.7.2 and 2019.1, respectively). We might want to reconsider this decision as time goes on and/or switch to a more recent macOS image as they become available. [1] `2000ac9fbf` (travis-ci: switch to Xcode 10.1 macOS image, 2019-01-17) [2] See e.g. `a1ccaedd62` (travis-ci: make the OSX build jobs' 'brew update' more quiet, 2019-02-02) or https://public-inbox.org/git/20180907032002.23366-1-szeder.dev@gmail.com/T/#+u Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
Ævar Arnfjörð Bjarmason	1ff750b128	tests: make GIT_TEST_GETTEXT_POISON a boolean Change the GIT_TEST_GETTEXT_POISON variable from being "non-empty?" to being a more standard boolean variable. Since it needed to be checked in both C code and shellscript (via test -n) it was one of the remaining shellscript-like variables. Now that we have "env--helper" we can change that. There's a couple of tricky edge cases that arise because we're using git_env_bool() early, and the config-reading "env--helper". If GIT_TEST_GETTEXT_POISON is set to an invalid value die_bad_number() will die, but to do so it would usually call gettext(). Let's detect the special case of GIT_TEST_GETTEXT_POISON and always emit that message in the C locale, lest we infinitely loop. As seen in the updated tests in t0017-env-helper.sh there's also a caveat related to "env--helper" needing to read the config for trace2 purposes. Since the C_LOCALE_OUTPUT prerequisite is lazy and relies on "env--helper" we could get invalid results if we failed to read the config (e.g. because we'd loop on includes) when combined with e.g. "test_i18ngrep" wanting to check with "env--helper" if GIT_TEST_GETTEXT_POISON was true or not. I'm crossing my fingers and hoping that a test similar to the one I removed in the earlier "config tests: simplify include cycle test" change in this series won't happen again, and testing for this explicitly in "env--helper"'s own tests. This change breaks existing uses of e.g. GIT_TEST_GETTEXT_POISON=YesPlease, which we've documented in po/README and other places. As noted in [1] we might want to consider also accepting "YesPlease" in "env--helper" as a special-case. But as the lack of uproar over `6cdccfce1e` ("i18n: make GETTEXT_POISON a runtime option", 2018-11-08) demonstrates the audience for this option is a really narrow set of git developers, who shouldn't have much trouble modifying their test scripts, so I think it's better to deal with that minor headache now and make all the relevant GIT_TEST_* variables boolean in the same way than carry the "YesPlease" special-case forward. 1. https://public-inbox.org/git/xmqqtvckm3h8.fsf@gitster-ct.c.googlers.com/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
SZEDER Gábor	db864306cf	ci: install 'libsvn-perl' instead of 'git-svn' Since `e7e9f5e7a1` (travis-ci: enable Git SVN tests t91xx on Linux, 2016-05-19) some of our Travis CI build jobs install the 'git-svn' package, because it was a convenient way to install its dependencies, which are necessary to run our 'git-svn' tests (we don't actually need the 'git-svn' package itself). However, from those dependencies, namely the 'libsvn-perl', 'libyaml-perl', and 'libterm-readkey-perl' packages, only 'libsvn-perl' is necessary to run those tests, the others arent, not even to fulfill some prereqs. So update 'ci/install-dependencies.sh' to install only 'libsvn-perl' instead of 'git-svn' and its additional dependencies. Note that this change has more important implications than merely not installing three unnecessary packages, as it keeps our builds working with Travis CI's Xenial images. In our '.travis.yml' we never explicitly specified which Linux image we want to use to run our Linux build jobs, and so far they have been run on the default Ubuntu 14.04 Trusty image. However, 14.04 just reached its EOL, and Travis CI has already began the transition to use 16.04 Xenial as the default Linux build environment [1]. Alas, our Linux Clang and GCC build jobs can't simply 'apt-get install git-svn' in the current Xenial images [2], like they did in the Trusty images, and, consequently, fail. Installing only 'libsvn-perl' avoids this issue, while the 'git svn' tests are still run as they should. [1] https://blog.travis-ci.com/2019-04-15-xenial-default-build-environment [2] 'apt-get install git-svn' in the Xenial image fails with: The following packages have unmet dependencies: git-svn : Depends: git (< 1:2.7.4-.) E: Unable to correct problems, you have held broken packages. The reason is that both the Trusty and Xenial images contain the 'git' package installed from 'ppa:git-core/ppa', so it's considerably newer than the 'git' package in the corresponding standard Ubuntu package repositories. The difference is that the Trusty image still contains these third-party apt repositories, so the 'git-svn' package was installed from the same PPA, and its version matched the version of the already installed 'git' package. In the Xenial image, however, these third-party apt-repositories are removed (to reduce the risk of unrelated interference and faster 'apt-get update') [3], and the version of the 'git-svn' package coming from the standard Ubuntu package repositories doesn't match the much more recent version of the 'git' package installed from the PPA, resulting in this dependecy error. Adding back the 'ppa:git-core/ppa' package repository would solve this dependency issue as well, but since the troublesome package happens to be unnecessary, not installing it in the first place is better. [3] https://docs.travis-ci.com/user/reference/xenial/#third-party-apt-repositories-removed Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
SZEDER Gábor	37fc8cb15f	ci: fix AsciiDoc/Asciidoctor stderr check in the documentation build job In 'ci/test-documentation.sh' we save the standard error of 'make doc', and, in an attempt to make sure that neither AsciiDoc nor Asciidoctor printed any warnings, we check the emptiness of the resulting file with '! test -s stderr.log'. This check has never actually worked, because in our 'ci/' build scripts we rely on 'set -e' aborting the build job when a command exits with error, and, unfortunately, the combination of the two doesn't work as intended. According to POSIX [1]: "The -e setting shall be ignored when executing [...] a pipeline beginning with the ! reserved word" [2] Watch and learn: $ echo unexpected >file $ ( set -e; ! test -s file ; echo "should not reach this" ) ; echo $? should not reach this 0 This is why we haven't noticed the warnings from Asciidoctor that were fixed in the first patches of this patch series, though some of them were already there in the build of v2.18.0-rc0 [3]. Check the emptiness of that file with 'test ! -s' instead, which works properly with 'set -e': $ ( set -e; test ! -s file ; echo "should not reach this" ) ; echo $? 1 Furthermore, dump the contents of that file to the log for our convenience, so if it were to unexpectedly end up being non-empty, then we wouldn't have to scroll through all that long build log looking for warnings, but could see them right away near the end of the log. Note that we are only really interested in the standard error of AsciiDoc and Asciidoctor, but by saving the stderr of 'make doc' we also save any error output from the make rules. Currently there is only one such line: we build the docs with Asciidoctor right after a 'make clean', meaning that 'make USE_ASCIIDOCTOR=1 doc' always starts with running 'GIT-VERSION-GEN', which in turn prints the version to stderr. A 'sed' command was supposed to remove this version line to prevent it from triggering that (previously defunct) emptiness check, but, unfortunately, this command doesn't work as intended, either, because it leaves the file to be checked intact, but that defunct emptiness check hid this issue, too... Furthermore, in the near future there will be an other line on stderr, because commit `9a71722b4d` (Doc: auto-detect changed build flags, 2019-03-17) in the currently cooking branch 'ma/doc-diff-doc-vs-doctor-comparison' will print " new asciidoc flags" at the beginning of both 'make doc' invokations. Extend that 'sed' command to remove this line, too, wrap it in a helper function so the output of both 'make doc' is filtered the same way, and change its invokation to actually write the logfile to be checked. [1] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#set [2] POSIX doesn't discuss the meaning of '! cmd' in case of simple commands, but it defines that "A pipeline is a sequence of one or more commands separated by the control operator '\|'", so apparently a simple command is considered as pipeline as well. http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_09_02 [3] https://travis-ci.org/git/git/jobs/385932007#L1463 Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
SZEDER Gábor	615a6c37e1	ci: stick with Asciidoctor v1.5.8 for now The recent release of Asciidoctor v2.0.0 broke our documentation build job on Travis CI, where we 'gem install asciidoctor', which always brings us the latest and (supposedly) greatest. Alas, we are not ready for that just yet, because it removed support for DocBook 4.5, and we have been requiring that particular DocBook version to build 'user-manual.xml' with Asciidoctor, resulting in: ASCIIDOC user-manual.xml asciidoctor: FAILED: missing converter for backend 'docbook45'. Processing aborted. Use --trace for backtrace make[1]: *** [user-manual.xml] Error 1 Unfortunately, we can't simply switch to DocBook 5 right away, as doing so leads to validation errors from 'xmlto', and working around those leads to yet another errors... [1] So let's stick with Asciidoctor v1.5.8 (latest stable release before v2.0.0) in our documentation build job on Travis CI for now, until we figure out how to deal with the fallout from Asciidoctor v2.0.0. [1] https://public-inbox.org/git/20190324162131.GL4047@pobox.com/ Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
SZEDER Gábor	f34a1bd96c	ci: install Asciidoctor in 'ci/install-dependencies.sh' When our '.travis.yml' was split into several 'ci/*' scripts [1], the installation of the 'asciidoctor' gem somehow ended up in 'ci/test-documentation.sh'. Install it in 'ci/install-dependencies.sh', where we install other dependencies of the Documentation build job as well (asciidoc, xmlto). [1] `657343a602` (travis-ci: move Travis CI code into dedicated scripts, 2017-09-10) Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
Johannes Schindelin	50b206371d	travis: remove the hack to build the Windows job on Azure Pipelines Since Travis did not support Windows (and now only supports very limited Windows jobs, too limited for our use, the test suite would time out all the time), we added a hack where a Travis job would trigger an Azure Pipeline (which back then was still called VSTS Build), wait for it to finish (or time out), and download the log (if available). Needless to say that it was a horrible hack, necessitated by a bad situation. Nowadays, however, we have Azure Pipelines support, and do not need that hack anymore. So let's retire it. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
Junio C Hamano	a8c51f77d1	ci: clear and mark MAKEFLAGS exported just once Clearing it once upfront, and turning all the assignment into appending, would future-proof the code even more, to prevent mistakes the previous one fixed from happening again. Also, mark the variable exported just once at the beginning. There is no point in marking it exported repeatedly. Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
SZEDER Gábor	406f93ae48	ci: make sure we build Git parallel Commit `2c8921db2b` (travis-ci: build with the right compiler, 2019-01-17) started to use MAKEFLAGS to specify which compiler to use to build Git. A bit later, and in a different topic branch commit `eaa62291ff` (ci: inherit --jobs via MAKEFLAGS in run-build-and-tests, 2019-01-27) started to use MAKEFLAGS as well. Unfortunately, there is a semantic conflict between these two commits: both of them set MAKEFLAGS, and since the line adding CC from `2c8921db2b` comes later in 'ci/lib.sh', it overwrites the number of parallel jobs added in `eaa62291ff`. Consequently, since both commits have been merged all our CI jobs have been building Git, building its documentation, and applying semantic patches sequentially, making all build jobs a bit slower. Running the test suite is unaffected, because the number of test jobs comes from GIT_PROVE_OPTS. Append to MAKEFLAGS when setting the compiler to use, to ensure that the number of parallel jobs to use is preserved. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago
SZEDER Gábor	a1ccaedd62	travis-ci: make the OSX build jobs' 'brew update' more quiet Before installing the necessary dependencies, our OSX build jobs run 'brew update --quiet'. This is problematic for two reasons: - This '--quiet' flag apparently broke overnight, resulting in errored builds: +brew update --quiet ==> Downloading https://homebrew.bintray.com/bottles-portable-ruby/portable-ruby-2.3.7.mavericks.bottle.tar.gz ######################################################################## 100.0% ==> Pouring portable-ruby-2.3.7.mavericks.bottle.tar.gz Usage: brew update_report [--preinstall] The Ruby implementation of brew update. Never called manually. --preinstall Run in 'auto-update' mode (faster, less output). -f, --force Override warnings and enable potentially unsafe operations. -d, --debug Display any debugging information. -v, --verbose Make some output more verbose. -h, --help Show this message. Error: invalid option: --quiet The command "ci/install-dependencies.sh" failed and exited with 1 during . I belive that this breakage will be noticed and fixed soon-ish, so we could probably just wait a bit for this issue to solve itself, but: - 'brew update --quiet' wasn't really quiet in the first place, as it listed over about 2000 lines worth of available packages that we absolutely don't care about, see e.g. one of the latest 'master' builds: https://travis-ci.org/git/git/jobs/486134962#L113 So drop this '--quiet' option and redirect 'brew update's standard output to /dev/null to make it really quiet, thereby making the OSX builds work again despite the above mentioned breakage. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	6 years ago

1 2 3

138 Commits (6f054f9fb3a501c35b55c65e547a244f14c38d56)