This version changes quite a few things:
1. The original parsed the mailmap file itself, and it did
it wrong (it did not understand entries with an extra
email key).
Instead, this version uses git's "%aE" and "%aN"
formats to have git perform the mapping, meaning we do
not have to read .mailmap at all, but still operate on
the current state that git sees (and it also works
properly from subdirs).
2. The original would find multiple names for an email,
but not the other way around.
This version can do either or both. If we find multiple
emails for a name, the resolution is less obvious than
the other way around. However, it can still be a
starting point for a human to investigate.
3. The original would order only by count, not by recency.
This version can do either. Combined with showing the
counts, it can be easier to decide how to resolve.
4. This version shows similar entries in a blank-delimited
stanza, which makes it more clear which options you are
picking from.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of __git_ps1 function operating in two-arg mode was
not very clear. It said "set PROMPT_COMMAND=__git_ps1" which is not
the right usage for this mode, followed by "To customize the prompt,
do this", giving a false impression that those who do not want to
customize it can get away with no-arg form, which was incorrect.
Make it clear that this mode always takes two arguments, pre and
post, with an example.
The straight-forward one should be listed as the primary usage, and
the confusing one should be an alternate for advanced users. Swap
the order of these two.
Acked-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For bash completion, the option '-o bashdefault' is used to indicate
that when no other choices are available, file completion should be
performed. Since this option is not available in tcsh, no file
completion is ever performed. Therefore, commands like 'git add ',
'git send-email ', etc, require the user to manually type out
the file name. This can be quite annoying.
To improve the user experience we try to simulate file completion
directly in this script (although not perfectly).
The known issues with the file completion simulation are:
- Possible completions are shown with their directory prefix.
- Completions containing shell variables are not handled.
- Completions with ~ as the first character are not handled.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_PS1_DESCRIBE_STYLE was introduced in v1.6.3.2~35. Document it in the
header comments.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A mediawiki page can contain, and even start with a " character, we have
to escape it when generating the fast-export stream, as well as \
character. While we're there, also escape newlines, but I don't think we
can get them from MediaWiki pages.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the user might get something like:
git-completion.sh:2466: command not found: compdef
If this script is loaded before compinit. The script would work either
way, but let's not be more annoying to the user.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Amit Bakshi reported, older versions of python (< 2.7) don't have
subprocess.check_output, so let's use subprocess.Popen directly as
suggested.
Suggested-by: Amit Bakshi <ambakshi@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tcsh users sometimes alias the 'git' command to another name. In
this case, the user expects to only have to issue a new 'complete'
command using the alias name.
However, the tcsh script currently uses the command typed by the
user to call the appropriate function in git-completion.bash, either
_git() or _gitk(). When using an alias, this technique no longer
works.
This change specifies the real name of the command (either 'git' or
'gitk') as a parameter to the script handling tcsh completion. This
allows the user to use any alias for the 'git' or 'gitk' commands,
while still getting completion to work.
A check for the presence of ${HOME}/.git-completion.bash is also
added to help the user make use of the script properly.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
when trying 'M-x git-status' in a submodule created with recent (1.7.5+)
git, the command fails with
| ... is not a git working tree
This is caused by creating submodules with '--separate-git-dir' but
still checking for a working tree by testing for a '.git' directory.
The patch fixes this by relaxing the existing detection a little bit.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can be presented with invalid completion results
when trying to complete a 'git checkout' command. This can happen
when using a branch name prefix that matches multiple remote branches.
For example, if available branches are:
master
remotes/GitHub/maint
remotes/GitHub/master
remotes/origin/maint
remotes/origin/master
When performing completion on 'git checkout ma' the user will be
given the choices:
maint
master
However, 'git checkout maint' will fail in this case, although
completion previously said 'maint' was valid. Furthermore, when
performing completion on 'git checkout mai', no choices will be
suggested. So, the user is first told that the branch name
'maint' is valid, but when trying to complete 'mai' into 'maint',
that completion is no longer valid.
The completion results should never propose 'maint' as a valid
branch name, since 'git checkout' will refuse it.
The reason for this bug is that the uniq program only
works with sorted input. The man page states
"uniq prints the unique lines in a sorted file".
When __git_refs uses the guess heuristic employed by checkout for
tracking branches it wants to consider remote branches but only if
the branch name is unique. To do that, it calls 'uniq -u'. However
the input given to 'uniq -u' is not sorted.
Therefore, in the above example, when dealing with 'git checkout ma',
"__git_refs '' 1" will find the following list:
master
maint
master
maint
master
which, when passed to 'uniq -u' will remain the same. Therefore
'maint' will be wrongly suggested as a valid option.
When dealing with 'git checkout mai', the list will be:
maint
maint
which happens to be sorted and will be emptied by 'uniq -u',
properly ignoring 'maint'.
A solution for preventing the completion script from suggesting
such invalid branch names is to first call 'sort' and then 'uniq -u'.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Zsh's bash completion emulation is buggy, not properly maintained, and
we have some workarounds in place for different bugs that appeared in
various versions.
Since I'm the only one that has worked on that code lately[1], it might make
snese to use the code I wrote specifically for git.
The advantages are:
1) Less workarounds
* No need to hack __get_comp_words_by_ref
* No need to hack IFS or words
2) Improved features
* 'git show master' now properly adds a space at the end (IFS bug)
* 'git checkout --conflict=' now properly returns the sub-items
(missing feature)
3) Consolidated code
* It's all now in a single chunk, and it's basically the same as
git-completion.zsh
Since there's some interest in moving the zsh-specific code out of this
script, lets go ahead and warn the users that they should be using
git-completion.zsh.
[1] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=history;f=Completion/bashcompinit
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems there's always issues with zsh's bash completion emulation.
I've tried to fix as many as I could[1], and most of the fixes are already
in the latest version of zsh, but still, there are issues.
There is no point going through all that pain; the emulation is easy to
achieve, and this patch works better than zsh's bash completion
emulation.
[1] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=commitdiff;h=23907bb840c80eef99eabba17e086e44c9b2d3fc
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current tcsh-completion support for Git, as can be found on the
Internet, takes the approach of defining the possible completions
explicitly. This has the obvious draw-back to require constant
updating as the Git code base evolves.
The approach taken by this commit is to to re-use the advanced bash
completion script and use its result for tcsh completion. This is
achieved by sourcing the bash script and outputting the completion
result for tcsh consumption.
Three solutions were looked at to implement this approach with (C)
being retained:
A) Modifications:
git-completion.bash and new git-completion.tcsh
Modify the existing git-completion.bash script to support
being sourced using bash (as now), but also executed using bash.
When being executed, the script will output the result of the
computed completion to be re-used elsewhere (e.g., in tcsh).
The modification to git-completion.bash is made not to be
tcsh-specific, but to allow future users to also re-use its
output. Therefore, to be general, git-completion.bash accepts a
second optional parameter, which is not used by tcsh, but could
prove useful for other users.
Pros:
1- allows the git-completion.bash script to easily be re-used
2- tcsh support is mostly isolated in git-completion.tcsh
Cons (for tcsh users only):
1- requires the user to copy both git-completion.tcsh and
git-completion.bash to ${HOME}
2- requires bash script to have a fixed name and location:
${HOME}/.git-completion.bash
B) Modifications:
git-completion.bash
Modify the existing git-completion.bash script to support
being sourced using bash (as now), but also executed using bash,
and sourced using tcsh.
Pros:
1- only requires the user to deal with a single file
2- maintenance more obvious for tcsh since it is entirely part
of the same git-completion.bash script.
Cons:
1- tcsh support could affect bash support as they share the
same script
2- small tcsh section must use syntax suitable for both tcsh
and bash and must be at the beginning of the script
3- requires script to have a fixed name and location:
${HOME}/.git-completion.sh (for tcsh users only)
C) Modifications:
New git-completion.tcsh
Provide a short tcsh script that generates another script
which extends git-completion.bash. This new script can be
used by tcsh to perform completion.
Pros:
1- tcsh support is entirely isolated in git-completion.tcsh
2- new tcsh script can be as complex as needed
Cons (for tcsh users only):
1- requires the user to copy both git-completion.tcsh and
git-completion.bash to ${HOME}
2- requires bash script to have a fixed name and location:
${HOME}/.git-completion.bash
3- sourcing the new script will generate a third script
Approach (C) was selected avoid any modification to git-completion.bash.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of all git commands is computed from the output of 'git help
-a', which already includes 'help', so there is no need to explicitly
add it once more when computing the list of porcelain commands.
Note that 'help' wasn't actually offered twice because of this,
because Bash filters duplicates from possible completion words.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turns out fast-export throws bad 'reset' commands because of a behavior
in transport-helper that is not even needed.
Either way, better to ignore them, otherwise the user will get warnings
when we OK them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
There's no concept of HEAD in mercurial, but let's try our best to do
something sensible.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Turns out repo.revs was introduced quite late, and it doesn't do
anything fancy for our refspec; only list all the numbers in that range.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
'hg commit' fails otherwise in some versions of mercurial because of
the missing user information. Other versions simply throw a warning and
guess though.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Some people prefer it this way.
% git config --global remote-hg.track-branches false
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
The base commands come from the tests of the hg-git project.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Base commands from hg-git tests:
https://bitbucket.org/durin42/hg-git/src
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Paint the marker for normal state in green and detached state
in red, instead of the other way around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main point is to match the colors to be more close to the color
output of "git status -sb".
- the branchname is green, or in red when the HEAD is detached;
- the flags are either red or green for unstaged/staged and the
remaining flags get a different color or none at all.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By setting GIT_PS1_SHOW_COLORHINTS when using __git_ps1
as PROMPT_COMMAND, you will get color hints in addition to
a different character (*+% etc.) to indicate the state of
the tree.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Changes __git_ps1 to allow its use as PROMPT_COMMAND in bash
in addition to setting PS1 with __git_ps1 in a command substitution.
PROMPT_COMMAND has advantages for using color without running
into prompt-wrapping issues. Only by assigning \[ and \] to PS1
directly can bash know that these and the enclosed zero-width codes in
between don't count in the length of the prompt.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To ease testing without depending on a reachable svn server, this
compact python script mimics parts of svnrdumps behaviour. It
requires the remote url to start with sim://.
Start and end revisions are evaluated. If the requested revision
doesn't exist, as it is the case with incremental imports, if no new
commit was added, it returns 1 (like svnrdump).
To allow using the same dump file for simulating multiple incremental
imports, the highest revision can be limited by setting the environment
variable SVNRMAX to that value. This simulates the situation where
higher revs don't exist yet.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Search for a note attached to the ref to update and read it's
'Revision-number:'-line. Start import from the next svn revision.
If there is no next revision in the svn repo, svnrdump terminates with
a message on stderr an non-zero return value. This looks a little
weird, but there is no other way to know whether there is a new
revision in the svn repo.
On the start of an incremental import, the parent of the first commit
in the fast-import stream is set to the branch name to update. All
following commits specify their parent by a mark number. Previous mark
files are currently not reused.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reference to update by the fast-import stream is hard-coded. When
fetching from a remote the remote-helper shall update refs in a
private namespace, i.e. a private subdir of refs/. This namespace is
defined by the 'refspec' capability, that the remote-helper advertises
as a reply to the 'capabilities' command.
Extend svndump and fast-export to allow passing the target ref.
Update svn-fe to be compatible.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 25ae7cfd19.
That patch does fix expansion of weird variables in some
simple tests, but it also seems to break other things, like
expansion of refs by "git checkout".
While we're sorting out the correct solution, we are much
better with the original bug (people with metacharacters in
their completions occasionally see an error message) than
the current bug (ref completion does not work at all).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe what '=' means in the output of __git_ps1 when using
GIT_PS1_SHOWUPSTREAM, which was not previously described.
Signed-off-by: Jonathan "Duke" Leto <jonathan@leto.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported by Jeroen Meijer[1]; the current code doesn't deal properly
with items (tags, branches, etc.) that have ${} in them because they get
expaned by bash while using compgen.
A simple solution is to quote the items so they get expanded properly
(\$\{\}).
In order to achieve that I took bash-completion's quote() function,
which is rather simple, and renamed it to __git_quote() as per Jeff
King's suggestion.
Solves the original problem for me.
[1] http://article.gmane.org/gmane.comp.version-control.git/201596
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matching the default file prefix b/ does not yield any results if config
option diff.noprefix or diff.mnemonicprefix is enabled.
Signed-off-by: Mischa POSLAWSKY <git@shiar.nl>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King