kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Jeff King	6cf378f0cb	docs: stop using asciidoc no-inline-literal In asciidoc 7, backticks like `foo` produced a typographic effect, but did not otherwise affect the syntax. In asciidoc 8, backticks introduce an "inline literal" inside which markup is not interpreted. To keep compatibility with existing documents, asciidoc 8 has a "no-inline-literal" attribute to keep the old behavior. We enabled this so that the documentation could be built on either version. It has been several years now, and asciidoc 7 is no longer in wide use. We can now decide whether or not we want inline literals on their own merits, which are: 1. The source is much easier to read when the literal contains punctuation. You can use `master~1` instead of `master{tilde}1`. 2. They are less error-prone. Because of point (1), we tend to make mistakes and forget the extra layer of quoting. This patch removes the no-inline-literal attribute from the Makefile and converts every use of backticks in the documentation to an inline literal (they must be cleaned up, or the example above would literally show "{tilde}" in the output). Problematic sites were found by grepping for '`.[{\\]' and examined and fixed manually. The results were then verified by comparing the output of "html2text" on the set of generated html pages. Doing so revealed that in addition to making the source more readable, this patch fixes several formatting bugs: - HTML rendering used the ellipsis character instead of literal "..." in code examples (like "git log A...B") - some code examples used the right-arrow character instead of '->' because they failed to quote - api-config.txt did not quote tilde, and the resulting HTML contained a bogus snippet like: <tt><sub></tt> foo <tt></sub>bar</tt> which caused some parsers to choke and omit whole sections of the page. - git-commit.txt confused ``foo`` (backticks inside a literal) with ``foo'' (matched double-quotes) - mentions of `A U Thor <author@example.com>` used to erroneously auto-generate a mailto footnote for author@example.com - the description of --word-diff=plain incorrectly showed the output as "[-removed-] and {added}", not "{+added+}". - using "prime" notation like: commit `C` and its replacement `C'` confused asciidoc into thinking that everything between the first backtick and the final apostrophe were meant to be inside matched quotes - asciidoc got confused by the escaping of some of our asterisks. In particular, `credential.\` and `credential.<url>.\*` properly escaped the asterisk in the first case, but literally passed through the backslash in the second case. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	13 years ago
Michael Haggerty	87b340b967	git-show-ref doc: typeset regexp in fixed width font Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>	13 years ago
Michael Haggerty	6ab260809b	git-show-ref: fix escaping in asciidoc source Two "^" characters were incorrectly being interpreted as markup for superscripting. Fix them by writing them as attribute references "{caret}". Although a single "^" character in a paragraph cannot be misinterpreted in this way, also write other "^" characters as "{caret}" in the interest of good hygiene (unless they are in literal paragraphs, of course, in which context attribute references are not recognized). Spell "{}" consistently, namely not quoted as "\{\}". Since the braces are empty, they cannot be interpreted as an attribute reference, and either spelling is OK. So arbitrarily choose one variation and use it consistently. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>	13 years ago
Jeff King	48bb914ed6	doc: drop author/documentation sections from most pages The point of these sections is generally to: 1. Give credit where it is due. 2. Give the reader an idea of where to ask questions or file bug reports. But they don't do a good job of either case. For (1), they are out of date and incomplete. A much more accurate answer can be gotten through shortlog or blame. For (2), the correct contact point is generally git@vger, and even if you wanted to cc the contact point, the out-of-date and incomplete fields mean you're likely sending to somebody useless. So let's drop the fields entirely from all manpages except git(1) itself. We already point people to the mailing list for bug reports there, and we can update the Authors section to give credit to the major contributors and point to shortlog and blame for more information. Each page has a "This is part of git" footer, so people can follow that to the main git manpage.	14 years ago
Michael J Gruber	9fbd8986bb	git-show-ref.txt: clarify the pattern matching git-show-ref really does not do what one would expect under the name pattern matching, so describe it. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
Jonathan Nieder	f1005987e2	Documentation: unbreak regex in show-ref manual I am not sure why, but the regular expression "(?:\^\{\})" gets rendered by asciidoc as "(?:\{})". The intent seems to be a regex matching the literal string "^{}", so this rewrites the markup to produce "(?:\^{})" as output. Cc: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
Jonathan Nieder	977ed83a6d	Documentation: add a FILES section for show-ref A peek at where the refs are kept might help understanding, even if, as the DESCRIPTION section suggests, direct access is not part of the public API. Balance that out with a pointer to update-ref. Suggested-by: Geoff Russell <geoffrey.russell@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	14 years ago
Holger Weiß	4318d3ba8f	Documentation: show-ref <pattern>s are optional Specifying one or more <pattern> parameters is optional when calling show-ref, so mark them as such using brackets in the manual. Signed-off-by: Holger Weiß <holger@zedat.fu-berlin.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Thomas Rast	0b444cdb19	Documentation: spell 'git cmd' without dash throughout The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in `647ac70` (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.	15 years ago
Jonathan Nieder	e62b393505	Show usage string for 'git show-ref -h' This only changes the behavior of "git show-ref -h" without any other options and arguments. "show-ref -h" currently is short for "show-ref --head", which shows all the refs/* and HEAD, as opposed to "show-ref" that shows all the refs/* and not HEAD. Does anybody use "show-ref -h"? It was in Linus's original, most likely only because "it might be handy", not because "the command should not show the HEAD by default for such and such reasons". So I think it is okay if "show-ref -h" (but not "show-ref --head") gives help and exits. If a current script uses "git show-ref -h" without any other arguments, it would have to be adapted by changing "-h" to "--head". Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	15 years ago
Stephen Boyd	69932bc611	show-ref: migrate to parse-options Also make the docs more consistent with the usage message. While we're here remove the zero initializers from the static variables as they're unnecessary. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Stephen Boyd	d4900ee48c	git-show-ref.txt: remove word and make consistent Under is better than in because of the nested nature of the .git directory. "also using" sounds a little odd, plus we say combined with later on so just use that. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Abhijit Menon-Sen	f448e24e2f	Make the DESCRIPTION match <x>... items in the SYNOPSIS When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION also mentions "<path>..." and says the specified "paths" (note plural) are used for $whatever. This fixes the obvious mismatches. Signed-off-by: Abhijit Menon-Sen <ams@toroid.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jonathan Nieder	ba020ef5eb	manpages: italicize git command names (which were in teletype font) The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.])\`/'\''\1'\''/g; print }' } for i in git.txt config.txt diff.txt blame.txt fetch.txt i18n.txt \ merge.txt pretty.txt pull.txt rev.txt urls.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jonathan Nieder	483bc4f045	Documentation formatting and cleanup Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jonathan Nieder	b1889c36d8	Documentation: be consistent about "git-" versus "git " Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Stephan Beyer	3240240ff4	Docs: Use "-l::\n--long\n" format in OPTIONS sections The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f\|--foo:: -f \| --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Christian Couder	9e1f0a85c6	documentation: move git(7) to git(1) As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Dan McGee	5162e69732	Documentation: rename gitlink macro to linkgit Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w\|-)?):(?P<target>\S?)(\[(?P<attrlist>.?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http\|https\|ftp\|file\|mailto\|callto\|image\|link)):(?P<target>\S?)(\[(?P<attrlist>.?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Sixt	f029427259	Clean up documentation that references deprecated 'git peek-remote'. Now that 'git peek-remote' is deprecated and only an alias for 'git ls-remote', it should not be referenced from other manual pages. This also removes the description of the --exec option, which is no longer present. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Julian Phillips	8bd26c4a2f	Documentation: show-ref: document --exclude-existing Use the comment in the code to document the --exclude-existing function to git-show-ref. Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	2eaf22242f	show-ref --hash=len, --abbrev=len, and --abbrev This teaches show-ref to abbreviate the object name. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Christian Couder	9581e0fca2	Document git-show-ref [-s\|--hash] option. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Jonas Fonseca	c0990ff36f	Add man page for git-show-ref Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago

24 Commits (675a0fe297e88e0fab2ee9b311d4ebb3c3bfef28)