This cuts down the work for the "real merge" to stuff where
people might actually disagree on the algorithm. The trivial
cases would seem to be totally independent of any policy.
This adds --stage option to show-files command. It shows
file-mode, SHA1, stage and pathname. Record separator follows
the usual convention of -z option as before.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The ce_namelen field has been renamed to ce_flags and split into
the top 2-bit unused, next 2-bit stage number and the lowest
12-bit name-length, stored in the network byte order. A new
macro create_ce_flags() is defined to synthesize this value from
length and stage, but it forgets to turn the value into the
network byte order. Here is a fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Normally you'd use state 0 for the "merged" state, and start out with
state 1 being "origin", state 2 being "first tree" and state 3 being
"second tree".
Once all the index entries are back in state 0, we have a successful
merge and can write the result tree back.
Of course, we can't even generate such an index yet, but give me
some time. This is a cunning plan. Let's see if it actually works.
(I feel like Wile E Coyote, waiting for the big rock to fall).
This adds '-z' to merge-tree and changes its default line termination to
LF to make it consistent with your other recent changes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds the '-q' option for show-diff.c to squelch complaints for
missing files.
It is handy if you want to run it in the merge temporary directory after
running merge-trees with its minimum checkout mode, which is the
default, because you would not find any files other than the ones that
needs human validation after the merge there.
It also fixes the argument parsing bug Paul Mackerras noticed in
<16991.42305.118284.139777@cargo.ozlabs.ibm.com> but slightly
differently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds NUL-terminated output (-z) to show-files. This is necessary
for merge-trees script to deal with filenames with embedded newlines.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This allows using a git tree over NFS with different byte order, and
makes it possible to just copy a fully populated repository and have
the end result immediately usable (needing just a refresh to update
the stat information).
This make all dates be stores as seconds since UTC epoch, with the
author's or committer's timezone as auxiliary data so that dates can be
pretty-printed in the original timezone later if anyone cares. I left
the date parsing in rev-tree.c for backward compatibility but it can be
dropped when we change to base64 :)
commit-tree now eats RFC2822 dates as AUTHOR_DATE because that's
what you're going to want to feed it.
Yes, glibc sucks and strptime is a pile of crap. We have to parse it
ourselves.
This adds '-r' (recursive) option and '-z' (NUL terminated)
option to ls-tree. I need it so that the merge-trees (formerly
known as git-merge.perl) script does not need to create any
temporary dircache while merging. It used to use show-files on
a temporary dircache to get the list of files in the ancestor
tree, and also used the dircache to store the result of its
automerge. I probably still need it for the latter reason, but
with this patch not for the former reason anymore.
It is relative to bb95843a5a0f397270819462812735ee29796fb4
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It's really a very generic thing: the notion of one sha1 revision
referring to another one. "fsck" uses it for all nodes, and "rev-tree"
only tracks commit-node relationships, but the code was already
the same - now we just make that explicit by moving it to a common
header file.
command line.
"arbitrary" is a bit wrong, since it is limited by the argument
size limit (128kB or so), but let's see if anybody ever cares.
Arguably you should prune your tree before you have a few thousand
dangling heads in your archive.
We can fix it by passing in a file listing if we ever care.
This makes things a lot more efficient, and makes it trivial to do things
like reachability analysis.
Add command line flags to tell what the head is, and whether to warn
about unreachable objects.
Changes diff-tree output format so that fields are separated by tabs instead of
spaces (readibility, parseability), and tree entry type is listed along the
entry (avoids having to figure that out from the mode in the scripts).
This is what my scripts expect.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
It seems like the nsec portability is limited; in particular, older
glibcs (<=2.2.4 at least) don't seem to like it. So access the nsec
fields in struct stat only when -DNSEC.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Ancient cat-file command used to leave temp_git_file_* and there
was support to remove them in the clean target of Makefile. I
do not think it is needed anymore.
From: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Now there is error() for "library" errors and die() for fatal "application"
errors. usage() is now used strictly only for usage errors.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
The nsec field of ctime/mtime is now checked only with -DNSEC defined during
compilation. nsec acts broken since it is stored in the icache but apparently
just gets to zero when flushed to filesystem not supporting it (e.g. ext3),
creating illusions of false changes. At least that's my impression.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
When compiled with -DCOLLISION_CHECK, we will check against SHA1
collisions when writing to the object database.
From: Christopher Li <chrislgit@chrisli.org>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
ls-tree tool provides just a way to export the binary tree objects
to a usable text format. This is bound to be useful in variety
of scripts, although none of those I have currently uses it.
But e.g. the simple script I've sent to HPA for purging the object
database uses it.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
My convention is that contrary to files trimmed to zero size,
deleted files always go to /dev/null. This patch turns show-diff
to abide this.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
This patch adds a -s flag for show-diff, which will surpress the
actual diffing. This is useful for my scripts when they just want
to see what needs to be updated in the cache.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Also, add "date" information to the output so that you can do something
like this:
rev-tree `cat .git/HEAD` | sort -nr | cut -d' ' -f2 | while read i; do cat-file commit $i; done
which basically becomes a "git log" (aka "git changes") where things are
sorted by time.
To do the automated commit-mailing I need to be able to answer the
question "which commits are here today but weren't yesterday"... i.e.
given two commit-ids $HEAD and $YESTERDAY I want to be able to do:
rev-tree $HEAD ^$YESTERDAY
to list those commits which are in the tree now but weren't
ancestors of yesterday's head.
Yes, I could probably do this with
rev-tree $HEAD $YESTERDAY | egrep -v ^[a-z0-9]*:3
but I prefer not to.
The ideas is that using the show-diff to generate the
patch including deleted and new file (in the next patch).
So we don't have to do the temp new file diff dance on the
script.
The cache index now contain enough information to generate
the whole patch. So the GIT SCM don't need separate command
for check out file to edit or delete. Just do the edit and
remove and GIT will generate the correct patch.
It still require tell GIT to add new files.
I looked a bit at my old BK tools for the same thing, but they were
just so horrid in many ways that I largely rewrote it all and these
tools do things a bit differently. Instead of aggressively piping
data from one process to another (which was clever but very hard
to follow), this first just splits out the mbox into many smaller
email files, and then does some scripts on these temporary files.
change. Promise.
It now always outputs all the revisions as <sha1>:<reachability>, where the
reachability is the bitmask of how that revision was reachable from the
commits in the argument list.
Trivially, if there is only one commit, the reachability will always be
(1 << 0) == 1 for all reachable revisions, and there won't be any edges
(so the "--edges" flag only makes sense with multiple commit keys).
or more commit points.
This is important both to know what the difference between two commit
points is, but also to figure out where to try to merge from.
Slight change of output format: it now lists all parents on the same line.
This allows it to work on initial commits too (which have no parents), and
also makes the output format a lot more intuitive.
Linus Torvalds