The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides a way for scripts to get at the new standard exclude
function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only git-ls-files(1) describes the gitignore format in detail, and it does so
with reference to git-ls-files options. Most users don't use the plumbing
command git-ls-files directly, and shouldn't have to look in its manpage for
information on the gitignore format.
Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor
out the gitignore documentation into that file, changing it to refer to
.gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference
gitignore(5) from other relevant manpages and documentation. Remove
now-redundant information on exclude patterns from git-ls-files(1), leaving
only information on how git-ls-files options specify exclude patterns and what
precedence they have.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- git-ls-files.txt: typo in description of --ignored
- git-clean.txt: s/forceRequire/requireForce/
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use .git/info/exclude in the example in git-ls-files.txt,
instead of .git/ignore, and update the list of commands looking
at .git/info/exclude in repository-layout.txt.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A bare "--" doesn't show up in man or html pages correctly
as two individual dashes unless backslashed as \--
in the asciidoc source. Note, no backslash is needed
inside a literal block.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without the --directory flag, git-ls-files wouldn't ever list directories,
producing no output for empty directories, which is good since they cannot
be added and they bear no content, even untracked one (if Git ever starts
tracking directories on their own, this should obviously change since the
content notion will change).
With the --directory flag however, git-ls-files would list even empty
directories. This may be good in some situations but sometimes you want to
prevent that. This patch adds a --no-empty-directory option which makes
git-ls-files omit empty directories.
Signed-off-by: Petr Baudis <pasky@suse.cz>
This patch makes the documentation refer to the index
as index instead of cache, but some references still
remain. (e.g. git-update-index.txt)
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates last place where checkout-cache gets mentioned wrongly
for checkout-index.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fixes focuses on improving the HTML output. Most noteworthy:
- Fix the Makefile to also make various *.html files depend on
included files.
- Consistently use 'NOTE: ...' instead of '[ ... ]' for additional
info.
- Fix ending '::' for description lists in OPTION section etc.
- Fix paragraphs in description lists ending up as preformated text.
- Always use listingblocks (preformatted text wrapped in lines with -----)
for examples that span empty lines, so they are put in only one HTML
block.
- Use '1.' instead of '(1)' for numbered lists.
- Fix linking to other GIT docs.
- git-rev-list.txt: put option descriptions in an OPTION section.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Useful if you have a file whose name starts with a dash.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add -m/--modified to show files that have been modified wrt. the index.
[jc: The original came from Brian Gerst on Sep 1st but it only checked
if the paths were cache dirty without actually checking the files were
modified. I also added the usage string and a new test.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace references to "read-cache" with references to git-read-tree in the
documentation. I chose that because reference say "see read-cache about
stages", and stages are explained in git-read-tree.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: Johannes spent time and effort to see how consistent our
use of terminilogy is, and as a byproduct made these corrections
not related to the terminology unification. I really appreciate
it.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When checkout-cache attempts to check out a non-directory where
a directory exists on the work tree, or to check out a file
under directory D when path D is a non-directory on the work
tree, the attempt fails. Before running checkout-cache, the
user can run git-ls-files with the -k (killed) option to get a
list of such paths. The tagged output format uses "K" to denote
them. This is useful for Porcelain layer to be careful when
dealing with the recently corrected behaviour of checkout-cache.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Junio C Hamano