Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised version of a patch or series, it can be
helpful (to reviewers) to include a summary of changes since the
previous attempt in the form of a range-diff, typically in the cover
letter. However, it is occasionally useful, despite making for a noisy
read, to insert a range-diff into the commentary section of the lone
patch of a 1-patch series.
Therefore, extend "git format-patch --range-diff=<refspec>" to insert a
range-diff into the commentary section of a lone patch rather than
requiring a cover letter.
Implementation note: Generating a range-diff for insertion into the
commentary section of a patch which itself is currently being generated
requires invoking the diffing machinery recursively. However, the
machinery does not (presently) support this since it uses global state.
Consequently, we need to take care to stash away the state of the
in-progress operation while generating the range-diff, and restore it
after.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised version of a patch or series, it can be
helpful (to reviewers) to include a summary of changes since the
previous attempt in the form of an interdiff, typically in the cover
letter. However, it is occasionally useful, despite making for a noisy
read, to insert an interdiff into the commentary section of the lone
patch of a 1-patch series.
Therefore, extend "git format-patch --interdiff=<prev>" to insert an
interdiff into the commentary section of a lone patch rather than
requiring a cover letter. The interdiff is indented to avoid confusing
git-am and human readers into considering it part of the patch proper.
Implementation note: Generating an interdiff for insertion into the
commentary section of a patch which itself is currently being generated
requires invoking the diffing machinery recursively. However, the
machinery does not (presently) support this since it uses global state.
Consequently, we need to take care to stash away the state of the
in-progress operation while generating the interdiff, and restore it
after.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In patches generated by git-format-patch, the area below the "---" line
following the commit message and before the actual 'diff' can be used
for commentary which the patch author wants to convey to readers of the
patch itself but not include in the commit message proper.
By default, the commentary area is empty, however, the --notes option
causes it to be populated with notes associated with the commit. In the
future, other options may be added which also insert content into the
commentary section.
To accommodate this, factor out the logic which delimits commentary
blocks from the commit message so that it can be re-used for upcoming
optional inserted content.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added as a NEEDSWORK in c3c36d7de2 (replace-object:
check_replace_refs is safe in multi repo environment, 2018-04-11),
waiting for a calmer period. Since doing so now doesn't conflict
with anything in 'pu', it seems as good a time as any.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_tag_buffer
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tag
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 76f5df305b (log: decorate grafted commits with "grafted" -
2011-08-18) lets us decorate grafted commits but I forgot about the
color.decorate.* config.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it helps to list all available config vars so the user can
search for something they want. The config man page can also be used
but it's harder to search if you want to focus on the variable name,
for example.
This is not the best way to collect the available config since it's
not precise. Ideally we should have a centralized list of config in C
code (pretty much like 'struct option'), but that's a lot more work.
This will do for now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard coding the name-to-id mapping in C code, keep it in an
array and use a common function to do the parsing. This reduces code
and also allows us to list all possible color slots later.
This starts using C99 designated initializers more for convenience
(the first designated initializers have been introduced in builtin/clean.c
for some time without complaints)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of relying on commit->util to store the source string, let the
user provide a commit-slab to store the source strings in.
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we write a MIME attachment, we write the mime headers
into fixed-size buffers. These are likely to be big enough
in practice, but technically the input could be arbitrarily
large (e.g., if the caller provided a lot of content in the
extra_headers string), in which case we'd quietly truncate
it and generate bogus output. Let's convert these buffers to
strbufs.
The memory ownership here is a bit funny. The original fixed
buffers were static, and we merely pass out pointers to them
to be used by the caller (and in one case, we even just
stuff our value into the opt->diffopt.stat_sep value).
Ideally we'd actually pass back heap buffers, and the caller
would be responsible for freeing them.
This patch punts on that cleanup for now, and instead just
marks the strbufs as static. That means we keep ownership in
this function, making it not a complete leak. This also
takes us one step closer to fixing it in the long term
(since we can eventually use strbuf_detach() to hand
ownership to the caller, once it's ready).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatting a series of patches using --attach and --cover-letter,
the cover letter lacks the closing MIME boundary, violating RFC 2046.
Certain clients, such as Thunderbird, discard the message body in such a
case.
Since the cover letter is just one part and sending it as
multipart/mixed is not very useful, always emit it as text/plain,
avoiding the boundary problem altogether.
Reported-by: Patrick Hemmer <git@stormcloud9.net>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is yet another patch to be filed under the keyword "libification".
There is one subtle change in behavior here, where a `git log` that has
been asked to show the mergetags would now stop reporting the mergetags
upon the first failure, whereas previously, it would have continued to the
next mergetag, if any.
In practice, that change should not matter, as it is 1) uncommon to
perform octopus merges using multiple tags as merge heads, and 2) when the
user asks to be shown those tags, they really should be there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of making trees load lazily, create a Coccinelle
script (contrib/coccinelle/commit.cocci) to ensure that all
references to the 'maybe_tree' member of struct commit are either
mutations or accesses through get_commit_tree() or
get_commit_tree_oid().
Apply the Coccinelle script to create the rest of the patch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the commit-graph file to walk commit history removes the large
cost of parsing commits during the walk. This exposes a performance
issue: lookup_tree() takes a large portion of the computation time,
even when Git never uses those trees.
In anticipation of lazy-loading these trees, rename the 'tree' member
of struct commit to 'maybe_tree'. This serves two purposes: it hints
at the future role of possibly being NULL even if the commit has a
valid tree, and it allows for unambiguous transformation from simple
member access (i.e. commit->maybe_tree) to method access.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--show-all" revision option shows UNINTERESTING
commits. Some of these commits may be unparsed when we try
to show them (since we may or may not need to walk their
parents to fulfill the request).
Commit 3131b71301 (Add "--show-all" revision walker flag for
debugging, 2008-02-09) resolved this by just skipping
pretty-printing for commits without their object contents
cached, saying:
Because we now end up listing commits we may not even have been parsed
at all "show_log" and "show_commit" need to protect against commits
that don't have a commit buffer entry.
That was the easy fix to avoid the pretty-printer segfaulting,
but:
1. It doesn't work for all formats. E.g., --oneline
prints the oid for each such commit but not a trailing
newline, leading to jumbled output.
2. It only affects some commits, depending on whether we
happened to parse them or not (so if they were at the
tip of an UNINTERESTING starting point, or if we
happened to traverse over them, you'd see more data).
3. It unncessarily ties the decision to show the verbose
header to whether the commit buffer was cached. That
makes it harder to change the logic around caching
(e.g., if we could traverse without actually loading
the full commit objects).
These days it's safe to feed such a commit to the
pretty-print code. Since be5c9fb904 (logmsg_reencode: lazily
load missing commit buffers, 2013-01-26), we'll load it on
demand in such a case. So let's just always show the verbose
headers.
This does change the behavior of plumbing, but:
a. The --show-all option was explicitly introduced as a
debugging aid, and was never documented (and has rarely
even been mentioned on the list by git devs).
b. Avoiding the commits was already not deterministic due
to (2) above. So the caller might have seen full
headers for these commits anyway, and would need to be
prepared for it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration and definition of hash_sha1_file to use
struct object_id and adjust all function calls.
Rename this function to hash_object_file.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The resolve_ref_unsafe() function may return NULL even with
a REF_ISSYMREF flag if a symref points to a broken ref. As a
result, it's possible for the decoration code's "is this
branch the current HEAD" check to segfault when it passes
the NULL to starts_with().
This is unlikely in practice, since we can only reach this
code if we already resolved HEAD to a matching sha1 earlier.
But it's possible if HEAD racily becomes broken, or if
there's a transient filesystem error.
We can fix this by returning early in the broken case, since
NULL could not possibly match any of our branch names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to get rid of some write-only variables, among them seven
SHA1 buffers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_tag to take a pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the remaining functions to take pointers to struct object_id
instead of pointers to unsigned char, and update the internals of these
functions as well. Among these functions is a caller of lookup_tag,
which we will convert shortly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the email-style subject prefix (e.g. "Subject: [PATCH] ") directly
when it's needed instead of letting log_write_email_headers() prepare
it in a static buffer in advance. This simplifies storage ownership and
code flow.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a strbuf to store the subject prefix string and move its
construction into its own function. This gets rid of two arbitrary
length limits and allows the string to be added by callers directly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=<string>" will print the
additional line-prefix on every line of output.
To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.
This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.
This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.
Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 76c61fb (log: decorate HEAD with branch name under
--decorate=full, too - 2015-05-13) adds "HEAD -> branch" decoration to
show current branch vs detached HEAD. The sign of whether HEAD is
detached or not is "->" (vs ",") because the branch is always colored
by type. Color the arrow the same as HEAD to visually emphasize that
the following branch is HEAD, without paying too much attention to the
actual separators "->" or ","
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff options already know how to print the output anywhere else
than stdout. The same is needed for log output in general, e.g.
when writing patches to files in `git format-patch`. Let's allow
users to use log_tree_commit() *without* changing global state via
freopen().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to teach the log-tree machinery to reuse the diffopt.file
field to output to a file stream other than stdout, in line with the
diff machinery already writing to diffopt.file.
However, we might want to write something after the diff in
log_tree_commit() (e.g. with the --show-linear-break option), therefore
we must not let the diff machinery close the file (as per
diffopt.close_file.
This means that log_tree_commit() itself must override the
diffopt.close_file flag and close the file, and if log_tree_commit() is
called in a loop, the caller is responsible to do the same.
Note: format-patch has an `--output-directory` option. Due to the fact
that format-patch's options are parsed first, and that the parse-options
machinery accepts uniquely abbreviated options, the diff options
`--output` (and `-o`) are shadowed. Therefore close_file is not set to 1
so that cmd_format_patch() does *not* need to handle the close_file flag
differently, even if it calls log_tree_commit() in a loop.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass graph width to pretty formatting, to make N in '%>|(N)'
include columns consumed by graph rendered when --graph option
is in use.
For example, in the output of
git log --all --graph --pretty='format: [%>|(20)%h] %ar%d'
this change will make all commit hashes align at 20th column from
the edge of the terminal, not from the edge of the graph.
Signed-off-by: Josef Kufner <josef@kufner.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This output format prevents format-patch output from breaking
readers if somebody copy+pasted an mbox into a commit message.
Unlike the traditional "mboxo" format, "mboxrd" is designed to
be fully-reversible. "mboxrd" also gracefully degrades to
showing extra ">" in existing "mboxo" readers.
This degradation is preferable to breaking message splitting
completely, a problem I've seen in "mboxcl" due to having
multiple, non-existent, or inaccurate Content-Length headers.
"mboxcl2" is a non-starter since it's inherits the problems
of "mboxcl" while being completely incompatible with existing
tooling based around mailsplit.
ref: http://homepage.ntlworld.com/jonathan.deboynepollard/FGA/mail-mbox-formats.html
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A commit log message sometimes tries to line things up using tabs,
assuming fixed-width font with the standard 8-place tab settings.
Viewing such a commit however does not work well in "git log", as
we indent the lines by prefixing 4 spaces in front of them.
This should all line up:
Column 1 Column 2
-------- --------
A B
ABCD EFGH
SPACES Instead of Tabs
Even with multi-byte UTF8 characters:
Column 1 Column 2
-------- --------
Ä B
åäö 100
A Møøse once bit my sister..
Tab-expand the lines in "git log --expand-tabs" output before
prefixing 4 spaces.
This is based on the patch by Linus Torvalds, but at this step, we
require an explicit command line option to enable the behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using FLEX_ARRAY macros reduces the amount of manual
computation size we have to do. It also ensures we don't
overflow size_t, and it makes sure we write the same number
of bytes that we allocated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Oftentimes, patches created by git format-patch will be stored in
version control or compared with diff. In these cases, two otherwise
identical patches can have different commit hashes, leading to diff
noise. Teach git format-patch a --zero-commit option that instead
produces an all-zero hash to avoid this diff noise.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Jeff King