Don't unlink the temp file when an object transfer fails, so next attempt
will pick up where the failed transfer left off
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add the sanity checks discussed on the list with Nick Hengeveld in
<20050927000931.GA15615@reactrix.com>.
* unlink of previous and rename from temp to previous can fail for
reasons other than benign ones (missing previous and missing temp).
Report these failures when we encounter them, to make diagnosing
problems easier.
* when rewinding the partially written result, make sure to
truncate the file.
Also verify the pack after downloading by calling
verify_packfile().
Signed-off-by: Junio C Hamano <junkio@cox.net>
HTTP partial transfer support for object, pack, and index transfers
[jc: this should not be placed in "master" -- it does not have any
fixes requested on the list.]
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... so try to set it only in later versions.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added support for additional CURL SSL settings via environment variables.
Client certificate/key files can be specified as well as alternate CA
information.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Return CURL error message when object transfer fails
[jc: added similar curl_errorstr errors to places where we
use curl_easy_perform() to run fetch that _must_ succeed.]
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the --recover option, we verify that we have absolutely
everything reachable from the target, not assuming that things
reachable from refs will be complete.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unlike write_sha1_file() that tries to create the object file in a
temporary location and then move it to the final location, fetch_object
could have been interrupted in the middle, leaving a corrupt file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows the remote repository to refer to additional repositories
in a file objects/info/http-alternates or
objects/info/alternates. Each line may be:
a relative path, starting with ../, to get from the objects directory
of the starting repository to the objects directory of the added
repository.
an absolute path of the objects directory of the added repository (on
the same server).
(only in http-alternates) a full URL of the objects directory of the
added repository.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This tries .../objects/info/http-alternates and then
.../objects/info/alternates, looking for a file which specifies where
else to download objects and packs from.
It currently only supports absolute paths, and doesn't support full URLs.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default the curl library adds "Pragma: no-cache" header to all
requests, which disables caching by proxy servers. However, most
files in a GIT repository are immutable, and caching them is safe and
could be useful.
This patch removes the "Pragma: no-cache" header from requests for all
files except the pack list (objects/info/packs) and references
(refs/*), which are really mutable and should not be cached.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 3b2a4c46fd5093ec79fb60e1b14b8d4a58c74612 commit)
We have deprecated the old environment variable names for quite a
while and now it's time to remove them. Gone are:
SHA1_FILE_DIRECTORIES AUTHOR_DATE AUTHOR_EMAIL AUTHOR_NAME
COMMIT_AUTHOR_EMAIL COMMIT_AUTHOR_NAME SHA1_FILE_DIRECTORY
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This processes objects in two simultaneous passes. Each object will
first be given to prefetch(), as soon as it is possible to tell that
it will be needed, and then will be given to fetch(), when it is the
next object that needs to be parsed. Unless an implementation does
something with prefetch(), this should have no effect.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds support to http-pull for finding the list of pack files
available on the server, downloading the index files for those pack
files, and downloading pack files when they contain needed objects not
available individually. It retains the index files even if the pack
files were not needed, but downloads the list of pack files once per
run if an object is not found separately.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Old libcurl has curl_easy_setopt(), and http-pull requires it; it just
doesn't have one of the options.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some newer features of libcurl are used which are not strictly necessary
for http-pull. Use them only if libcurl is new enough to know about them.
[jc: I just reworked #ifdef sprinkled all over the code into a
single section that defines a set of macros.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Cause setting environment variable GIT_SSL_NO_VERIFY to turn off
curl's ssl peer verification.
Only use curl for http transfers, instead of curl and wget.
Make curl check ~/.netrc for credentials.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Packed delta files created by git-pack-objects seems to be the
way to go, and existing "delta" object handling code has exposed
the object representation details to too many places. Remove it
while we refactor code to come up with a proper interface in
sha1_file.c.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds support for refs to http-pull, both the -w option and reading
the target from a served file.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds support to pull.c for requesting a reference and writing it to a
file. All of the git-*-pull programs get stubs for now.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This addresses a concern raised by Jason McMullan in the mailing
list discussion. After retrieving and storing a potentially
deltified object, pull logic tries to check and fulfil its delta
dependency. When the pull procedure is killed at this point,
however, there was no easy way to recover by re-running pull,
since next run would have found that we already have that
deltified object and happily reported success, without really
checking its delta dependency is satisfied.
This patch introduces --recover option to git-*-pull family
which causes them to re-validate dependency of deltified objects
we are fetching. A new test t5100-delta-pull.sh covers such a
failure mode.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a remote repository is deltified, we need to get the
objects that a deltified object we want to obtain is based upon.
The initial parts of each retrieved SHA1 file is inflated and
inspected to see if it is deltified, and its base object is
asked from the remote side when it is. Since this partial
inflation and inspection has a small performance hit, it can
optionally be skipped by giving -d flag to git-*-pull commands.
This flag should be used only when the remote repository is
known to have no deltified objects.
Rsync transport does not have this problem since it fetches
everything the remote side has.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add <limits.h> to the include files handled by "cache.h", and remove
extraneous #include directives from various .c files. The rule is that
"cache.h" gets all the basic stuff, so that we'll have as few system
dependencies as possible.
- Raw hashes should be unsigned char.
- String functions want signed char.
- Hash and compress functions want unsigned char.
Signed-off By: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This moves the private "say()" function to pull.c, renames it to
"pull_say()", and introduces a global variable "get_verbosely" that
makes the pull backends report what they fetch. The -v option is
added to git-rpull and git-http-pull to match git-local-pull.
The documentation is updated to describe these pull commands.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently pull() calls fetch() without checking whether we have
the wanted object but all of the existing fetch()
implementations perform this check and return success
themselves. This patch moves the check to the caller.
I will be sending a trivial git-local-pull which depends on
this in the next message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The method for deciding what to pull is useful separately from any of the
ways of actually fetching the objects.
So split out "pull" functionality from http-pull and rpull
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Introduce xmalloc and xrealloc to die gracefully with a descriptive
message when out of memory, rather than taking a SIGSEGV.
Signed-off-by: Christopher Li<chrislgit@chrisli.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds three similar and related programs. http-pull downloads
objects from an HTTP server; rpull downloads objects by using ssh and
rpush on the other side; and rpush uploads objects by using ssh and rpull
on the other side.
The algorithm should be sufficient to make the network throughput required
depend only on how much content is new, not at all on how much content the
repository contains.
The combination should enable people to have remote repositories by way of
ssh login for authenticated users and HTTP for anonymous access.
Signed-Off-By: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Nick Hengeveld