The new git-fast-import command is not intended to be invoked
directly by an end user. So offering it as a possible completion
for a subcommand is not very useful.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Completing the 3 core subcommands to git-remote, along with the
names of remotes for 'show' and 'prune' (which take only existing
remotes) is handy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Apparently `git-rebase -m` uses a metadata directory within .git
(.git/.dotest-merge) rather than .dotest used by git-am (and
git-rebase without the -m option). This caused the completion code
to not offer --continue, --skip or --abort when working within a
`git-rebase -m` session.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We now offer completion support for git-bisect's subcommands,
as well as ref name completion on the good/bad/reset subcommands.
This should make interacting with git-bisect slightly easier on
the fingers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We've recently added --add as an argument to git-config, but I
missed putting it into the earlier round of git-config updates
within the bash completion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't offer resolve as a possible subcommand completion. If you
read the top of the script, there is a big warning about how it
will go away soon in the near future. People should not be using it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm lazy. I don't want to type out --prune if bash can do it for
me with --<tab>.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Apparently nobody really makes use of git-diff-stages, as nobody
has complained that it is not supported by the git-diff frontend.
Since its likely this will go away in the future, we should not
offer it as a possible subcommand completion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I just realized I did not support ref name completion for git-cherry.
This tool is just too useful to contributors who submit patches
upstream by email; completion support for it is very handy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
format-patch/log/whatchanged all take --not and --all as options
to the internal revlist process. So these should be supported
as possible completions.
gitk takes anything rev-list/log/whatchanged takes, so we should
use complete_revlist to handle its options.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because our use of -o nospace prevents bash from adding a trailing space
when a completion is unique and has been fully completed, we need to
perform this addition on our own. This (large) change converts all
existing uses of compgen to our wrapper __gitcomp which attempts to
handle this by tacking a trailing space onto the end of each offered
option.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In many cases we know a completion will be unique, but we've disabled
bash's automatic space addition (-o nospace) so we need to do it
ourselves when necessary.
This change adds additional support for new configuration options
added in 1.5.0, as well as some extended completion support for
the color.* family of options.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most of these commands are not ones you want to invoke from the
command line on a frequent basis, or have been renamed in 1.5.0 to
more friendly versions, but the old names are being left behind to
support existing scripts in the wild.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because we use the nospace option for our completion function for
the main 'git' wrapper bash won't automatically add a space after a
unique completion has been made by the user. This has been pointed
out in the past by Linus Torvalds as an undesired behavior. I agree.
We have to use the nospace option to ensure path completion for
a command such as `git show` works properly, but that breaks the
common case of getting the space for a unique completion. So now we
set IFS=$'\n' (linefeed) and add a trailing space to every possible
completion option. This causes bash to insert the space when the
completion is unique.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new --interactive mode of git-add can be very useful, so users
will probably want to have completion for it.
Likewise the new git-add--interactive executable is actually a
plumbing command. Its invoked by `git add --interactive` and is
not intended to be invoked directly by the user. Therefore we
should hide it from the list of available Git commands.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that git-show is capable of displaying any file content from any
revision and is the approved Porcelain-ish level method of doing so,
cat-file should no longer be classified as a user-level utility by
the bash completion package.
I'm also classifying the new git-reflog command as plumbing for the
time being as there are no subcommands which are really useful to
the end-user. git-gc already invokes `git reflog expire --all`,
which makes it rather unnecessary for the user to invoke it directly.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The short options (-l, -f, -d) for git-branch are rather silly to
include in the completion generation as these options must be fully
typed out by the user and most users already know what the options
are anyway, so including them in the suggested completions does
not offer huge value. (The same goes for git-checkout and git-diff.)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is plausible for somebody to want to view the commit log in a
different encoding from i18n.commitencoding -- the project's
policy may be UTF-8 and the user may be using a commit message
hook to run iconv to conform to that policy (and either not have
i18n.commitencoding to default to UTF-8 or have it explicitly
set to UTF-8). Even then, Latin-1 may be more convenient for
the usual pager and the terminal the user uses.
The new variable i18n.logoutputencoding is used in preference to
i18n.commitencoding to decide what encoding to recode the log
output in when git-log and friends formats the commit log message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that 'git show' accepts ref:path as an argument to specify a
tree or blob we should use the same completion logic as we support
for cat-file's object identifier.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While adding colour to the branch command it was pointed out that a
config option like "branch.color" conflicts with the pre-existing
"branch.something" namespace used for specifying default merge urls and
branches. The suggested solution was to flip the order of the
components to "color.branch", which I did for colourising branch.
This patch does the same thing for
- git-log (color.diff)
- git-status (color.status)
- git-diff (color.diff)
- pager (color.pager)
I haven't removed the old config options; but they should probably be
deprecated and eventually removed to prevent future namespace
collisions. I've done this deprecation by changing the documentation
for the config file to match the new names; and adding the "color.XXX"
options to contrib/completion/git-completion.bash.
Unfortunately git-svn reads "diff.color" and "pager.color"; which I
don't like to change unilaterally.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit 35e65ecc broke completion of local refs, e.g. "git pull . fo<tab>"
no longer would complete to "foo". Instead it printed out an internal
git error ("fatal: Not a git repository: '.'").
The break occurred when I tried to improve performance by switching from
git-peek-remote to git-for-each-ref. Apparently git-peek-remote will
drop into directory "$1/.git" (where $1 is its first parameter) if it
is given a repository with a working directory. This allowed the bash
completion code to work properly even though it was not handing over
the true repository directory.
So now we do a stat in bash to see if we need to add "/.git" to the
path string before running any command with --git-dir.
I also tried to optimize away two "git rev-parse --git-dir" invocations
in common cases like "git log fo<tab>" as typically the user is in the
top level directory of their project and therefore the .git subdirectory
is in the current working directory. This should make a difference on
systems where fork+exec might take a little while.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since the user's git installation is not likely to grow a new command
or merge strategy in the lifespan of the current shell process we can
save time during completion operations by caching these lists during
sourcing of the completion support.
If the git executable is not available or we run into errors while
caching at load time then we defer these to runtime and generate
the list on the fly. This might happen if the user doesn't put git
into their PATH until after the completion script gets sourced.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because git-merge and git-rebase both accept -s, --strategy or --strategy=
we should recognize all three formats in the bash completion functions and
issue back all merge strategies on demand.
I also moved the prior word testing to be before the current word testing,
as the current word cannot be completed with -- if the prior word was an
option which requires a parameter, such as -s or --strategy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a really ugly completion script for git-repo-config, but it has
some nice properties. I've added all of the documented configuration
parameters from Documentation/config.txt to the script, allowing the
user to complete any standard configuration parameter name.
We also have some intelligence for the remote.*.* and branch.*.* keys
by completing not only the key name (e.g. remote.origin) but also the
values (e.g. remote.*.fetch completes to the branches available on the
corresponding remote).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that people are really likely to start using separate remotes
(due to the default in git-clone changing) we should support ref
completion for these refs in as many commands as possible.
While we are working on this routine we should use for-each-ref
to obtain a list of local refs, as this should run faster than
peek-remote as it does not need to dereference tag objects in
order to produce the list of refs back to us. It should also
be more friendly to users of StGIT as we won't generate a list
of the StGIT metadata refs.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Typing out options to git log/show/whatchanged can take a while, but
we can easily complete them with bash. So list the most common ones,
especially --pretty=online|short|medium|... so that users don't need
to type everything out.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As git-rebase is a popular command bash should know how to complete
reference names and its long options. We only support completions
which make sense given the current state of the repository, that
way users don't get shown --continue/--skip/--abort on the first
execution.
Also added support for long option --strategy to git-merge, as I
missed that option earlier and just noticed it while implementing
git-rebase.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Provide completion for currently known long options supported by
git-format-patch as well as the revision list specification argument,
which is generally either a refname or in the form a..b.
Since _git_log was the only code that knew how to complete a..b, but
we want to start adding option support to _git_log also refactor the
a..b completion logic out into its own function.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Many users want to display the current branch name of the current git
repository as part of their PS1 prompt, much as their PS1 prompt might
also display the current working directory name.
We don't force our own PS1 onto the user. Instead we let them craft
their own PS1 string and offer them the function __git_ps1 which they
can invoke to obtain either "" (when not in a git repository) or
"(%s)" where %s is the name of the current branch, as read from HEAD,
with the leading refs/heads/ removed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Users generally are not going to need to invoke plumbing-level commands
from within one line shell commands. If they are invoking these commands
then it is likely that they are glueing them together into a shell script
to perform an action, in which case bash completion for these commands is
of relatively little use.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that git-merge is high-level Porcelain users are going to expect
to be able to use it from the command line, in which case we really
should also be able to complete ref names as parameters.
I'm also including completion support for the merge strategies
that are supported by git-merge.sh, should the user wish to use a
different strategy than their default.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This change removes between 1 and 4 sed invocations per completion
entered by the user. In the case of cat-file the 4 invocations per
completion can take a while on Cygwin; running these replacements
directly within bash saves some time for the end user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that log, whatchanged, rev-list, etc. support the symmetric
difference operator '...' we should provide bash completion for it
just like we do for '..'.
While we are at it we can remove two sed invocations during the
interactive prompt and replace them with internal bash operations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user has setup a command line of "git --git-dir=baz" then
anything we complete must be performed within the scope of "baz"
and not the current working directory.
This is useful with commands such as "git --git-dir=git.git log m"
to complete out "master" and view the log for the master branch of
the git.git repository. As a nice side effect this also works for
aliases within the target repository, just as git would honor them.
Unfortunately because we still examine arguments by absolute position
in most of the more complex commands (e.g. git push) using --git-dir
with those commands will probably still cause completion to fail.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that Git natively supports remote specifications within the
config file such as:
[remote "origin"]
url = ...
we should provide bash completion support "out of the box" for
these remotes, just like we do for the .git/remotes directory.
Also cleaned up the __git_aliases expansion to use the same form
of querying and filtering repo-config as this saves two fork/execs
in the middle of a user prompted completion. Finally also forced
the variable 'word' to be local within __git_aliased_command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only platform which actually needs to define .exe suffixes as
part of its completion set is Cygwin. So don't define them on any
other platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The show-branch and merge-base commands were partially supported
when it came to bash completions as they were only specified in
one form another. Now we specify them in both forms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Completion for the --hard/--soft/--mixed modes of operation as
well as a ref name for <commit-ish> can be very useful and save
some fingers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Cygwin a user might complete the new git-branch builtin as
git-branch.exe, at which point bash requires a new completion
registration for the command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Add aliases to the list of available git commands.
- Make completion work for aliased commands.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a set of bash completion routines for many of the
popular core Git tools. I wrote these routines from scratch
after reading the git-compl and git-compl-lib routines available
from the gitcompletion package at http://gitweb.hawaga.org.uk/
and found those to be lacking in functionality for some commands.
Consequently there may be some similarities but many differences.
Since these are completion routines only for tools shipped with
core Git and since bash is a popular shell on many of the native
core Git platforms (Linux, Mac OS X, Solaris, BSD) including these
routines as part of the stock package would probably be convienent
for many users.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano