Remove extra + 1 from resp_len, the length of the byte sequence to be
Base64 encoded and passed to the server as the response. Or the response
incorrectly contains an extra \0.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't check for NOLOGIN (LOGINDISABLED) capability when imap.authMethod
is specified.
LOGINDISABLED capability doesn't forbid using AUTHENTICATE, so it should
be allowed, or we can't connect to IMAP servers which only accepts
AUTHENTICATE command.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test uses hardcoded #!/bin/sh to create a pre-commit hook
script. Because the generated script uses $(command substitution),
which is not supported by /bin/sh on some platforms (e.g. Solaris),
the resulting pre-commit always fails.
Which is not noticeable as the test that uses the hook is about
checking the behaviour of the command when the hook fails ;-), but
nevertheless it is not testing what we wanted to test.
Use write_script so that the resulting script is run under the same
shell our scripted Porcelain commands are run, which must support
the necessary $(construct).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test prepares a sample file "dir/two" with a single incomplete
line in it with "printf", and also prepares a small helper script
"diff" to create a file with a single incomplete line in it, again
with "printf". The output from the latter is compared with an
expected output, again prepared with "printf" hence lacking the
final LF. There is no reason for this test to be using files with
an incomplete line at the end, and these look more like a mistake
of not using
printf "%s\n" "string to be written"
and using
printf "string to be written"
Depending on what would be in $GIT_PREFIX, using the latter form
could be a bug waiting to happen. Correct them.
Also, the test uses hardcoded #!/bin/sh to create a small helper
script. For a small task like what the generated script does, it
does not matter too much in that what appears as /bin/sh would not
be _so_ broken, but while we are at it, use write_script instead,
which happens to make the result easier to read by reducing need
of one level of quoting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent cleanup in b7cbbff switched t5532's use of
backticks to $(). This matches our normal shell style, which
is good. But it also breaks the test on Solaris, where
/bin/sh does not understand $().
Our normal shell style assumes a modern-ish shell which
knows about $(). However, some tests create small helper
scripts and just write "#!/bin/sh" into them. These scripts
either need to go back to using backticks, or they need to
respect $SHELL_PATH. The easiest way to do the latter is to
use write_script.
While we're at it, let's also stick the script creation
inside a test_expect block (our usual style), and split the
perl snippet into its own script (to prevent quoting
madness).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pass off to the "_gently" form to do the real work, and
just die() if it returned an error. However, our die message
de-references "value", which may be NULL if the request was
to unset a variable. Nobody using glibc noticed, because it
simply prints "(null)", which is good enough for the test
suite (and presumably very few people run across this in
practice). But other libc implementations (like Solaris) may
segfault.
Let's not only fix that, but let's make the message more
clear about what is going on in the "unset" case.
Reported-by: "Tom G. Christensen" <tgc@jupiterrise.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is just a thin wrapper for the "_gently" form
of the function. But the gently form is designed to feed
builtin/config.c, which passes our return code directly to
its exit status, and thus uses positive error values for
some cases. We check only negative values, meaning we would
fail to die in some cases (e.g., a malformed key).
This may or may not be triggerable in practice; we tend to
use this non-gentle form only when setting internal
variables, which would not have malformed keys.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This follows our usual style (both throughout git, and
throughout the rest of this file).
This covers the whole file, but note that I left the capitalization in
the multi-sentence:
error: malformed value...
error: Must be one of ...
because it helps make it clear that we are starting a new sentence in
the second one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felix Ruess <felix.ruess@gmail.com> noticed that with configuration
$ git config --global 'http.proxy=socks5h://127.0.0.1:1080'
connections to remote sites time out, waiting for DNS resolution.
The logic to detect various flavours of SOCKS proxy and ask the
libcurl layer to use appropriate one understands the proxy string
that begin with socks5, socks4a, etc., but does not know socks5h,
and we end up using CURLPROXY_SOCKS5. The correct one to use is
CURLPROXY_SOCKS5_HOSTNAME.
https://curl.haxx.se/libcurl/c/CURLOPT_PROXY.html says
..., socks5h:// (the last one to enable socks5 and asking the
proxy to do the resolving, also known as CURLPROXY_SOCKS5_HOSTNAME
type).
which is consistent with the way the breakage was reported.
Tested-by: Felix Ruess <felix.ruess@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emit an informative error when failed to hold lock of HEAD.
2233066e (refs: add a new function set_worktree_head_symref,
2016-03-27) added set_worktree_head_symref(), but this is missing a
call to unable_to_lock_message() after hold_lock_file_for_update()
fails, so it emits an empty error message:
% git branch -m oldname newname
error:
error: HEAD of working tree /path/to/wt is not updated
fatal: Branch renamed to newname, but HEAD is not updated!
Thanks to Eric Sunshine for pointing this out.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When f9568530 (builtin-commit: resurrect behavior for multiple -m
options, 2007-11-11) converted a "char *message" to "struct strbuf
message" to hold the messages given with the "-m" option, it
incorrectly changed the checks "did we get a message with the -m
option?" to "is message.len 0?". Later, we noticed one breakage
from this change and corrected it with 25206778 (commit: don't start
editor if empty message is given with -m, 2013-05-25).
However, "we got a message with -m, even though an empty one, so we
shouldn't be launching an editor" was not the only breakage.
* "git commit --amend -m '' --allow-empty", even though it looks
strange, is a valid request to amend the commit to have no
message at all. Due to the misdetection of the presence of -m on
the command line, we ended up keeping the log messsage from the
original commit.
* "git commit -m "$msg" -F file" should be rejected whether $msg is
an empty string or not, but due to the same bug, was not rejected
when $msg is empty.
* "git -c template=file -m "$msg"" should ignore the template even
when $msg is empty, but it didn't and instead used the contents
from the template file.
Correct these by checking have_option_m, which the earlier 25206778
introduced to fix the same bug.
Reported-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git commit --amend -m ''` seems to be an unambiguous request to blank a
commit message, but it actually leaves the commit message as-is. That's
the case regardless of whether `--allow-empty-message` is specified, and
doesn't so much as drop a non-zero return code.
Add failing tests to show this behaviour.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update 75faa45a (replace trivial malloc + sprintf / strcpy
calls with xstrfmt, 2015-09-24) rewrote
prepare an empty buffer
if (len)
append the first len bytes of "prefix" to the buffer
append "path" to the buffer
that computed "path", optionally prefixed by "prefix", into
xstrfmt("%.*s%s", len, prefix, path);
However, passing a NULL pointer to the printf(3) family of functions
to format it with %s conversion, even with the precision set to 0,
i.e.
xstrfmt("%.*s", 0, NULL)
yields undefined results, at least on some platforms.
Avoid this problem by substituting prefix with "" when len==0, as
prefix can legally be NULL in that case. This would mimick the
intent of the original code better.
Reported-by: Tom G. Christensen <tgc@jupiterrise.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never used Data::Dumper in this script. The only reference
of it was always commented out and removed over a decade ago in
commit 4bc87a28be
("send-email: Change from Mail::Sendmail to Net::SMTP")
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a YYYYmmddHHMMSS date representation is more meaningful to
humans, especially when used for lookups on NNTP servers or linking
to archive sites via Message-ID (e.g. mid.gmane.org or
mid.mail-archive.com). This timestamp format more easily gives a
reader of the URL itself a rough date of a linked message compared
to having them calculate the seconds since the Unix epoch.
Furthermore, having the MUA name in the Message-ID seems to be a
rare oddity I haven't noticed outside of git-send-email. We
already have an optional X-Mailer header field to advertise for
us, so extending the Message-ID by 15 characters can make for
unpleasant Message-ID-based URLs to archive sites.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git blame reports lines as not "Not Committed Yet" when they have
CRLF in the index, CRLF in the worktree and core.autocrlf is true.
Since commit c4805393 (autocrlf: Make it work also for un-normalized
repositories, 2010-05-12), files that have CRLF in the index are not
normalized at commit when core.autocrl is set.
Add a call to read_cache() early in fake_working_tree_commit(),
before calling convert_to_git().
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct api is trace_printf_key(), not trace_print_key().
Also do not throw a random string at printf(3)-like function;
instead, feed it as a parameter that is fed to a "%s" conversion
specifier.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general "echo 2>&1 $msg" to redirect a possible error message
that comes from 'echo' itself into the same standard output stream
$msg is getting written to does not make any sense; it is not like
we are expecting to see any errors out of 'echo' in these statements,
and even if it were the case, there is no reason to prevent the
error messages from being sent to the standard error stream.
These are clearly meant to send the argument given to echo to the
standard error stream as error messages. Correctly redirect by
saying "send what is written to the standard output to the standard
error", i.e. "1>&2" aka ">&2".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit aedcb7d (branch.c: use 'ref-filter' APIs, 2015-09-23)
adjusted the symref-printing code to look like this:
if (item->symref) {
skip_prefix(item->symref, "refs/remotes/", &desc);
strbuf_addf(&out, " -> %s", desc);
}
This has three bugs in it:
1. It always skips past "refs/remotes/", instead of
skipping past the prefix associated with the branch we
are showing (so commonly we see "refs/remotes/" for the
refs/remotes/origin/HEAD symref, but the previous code
would skip "refs/heads/" when showing a symref it found
in refs/heads/.
2. If skip_prefix() does not match, it leaves "desc"
untouched, and we show whatever happened to be in it
(which is the refname from a call to skip_prefix()
earlier in the function).
3. If we do match with skip_prefix(), we stomp on the
"desc" variable, which is later passed to
add_verbose_info(). We probably want to retain the
original refname there (though it likely doesn't matter
in practice, since after all, one points to the other).
The fix to match the original code is fairly easy: record
the prefix to strip based on item->kind, and use it here.
However, since we already have a local variable named "prefix",
let's give the two prefixes verbose names so we don't
confuse them.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make a few more spots more readable by using the recently introduced,
Windows-specific helper.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-format-patch recognizes -s as shorthand only for --signoff, however,
its documentation shows -s as shorthand for both --signoff and
--no-patch. Resolve this confusion by suppressing the bogus -s shorthand
for --no-patch.
While here, also avoid showing the --no-patch option in git-format-patch
documentation since it doesn't make sense to ask to suppress the patch
while at the same time explicitly asking to format the patch (which,
after all, is the purpose of git-format-patch).
Reported-by: Kevin Brodsky <corax26@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a branch, currently only the HEAD of current working tree
is updated, but it must update HEADs of all working trees which point at
the old branch.
This is the current behavior, /path/to/wt's HEAD is not updated:
% git worktree list
/path/to 2c3c5f2 [master]
/path/to/wt 2c3c5f2 [oldname]
% git branch -m master master2
% git worktree list
/path/to 2c3c5f2 [master2]
/path/to/wt 2c3c5f2 [oldname]
% git branch -m oldname newname
% git worktree list
/path/to 2c3c5f2 [master2]
/path/to/wt 0000000 [oldname]
This patch fixes this issue by updating all relevant worktree HEADs
when renaming a branch.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function set_worktree_head_symref, to update HEAD symref for
the specified worktree.
To update HEAD of a linked working tree,
create_symref("worktrees/$work_tree/HEAD", "refs/heads/$branch", msg)
could be used. However when it comes to updating HEAD of the main
working tree, it is unusable because it uses $GIT_DIR for
worktree-specific symrefs (HEAD).
The new function takes git_dir (real directory) as an argument, and
updates HEAD of the working tree. This function will be used when
renaming a branch.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Acked-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file was renamed in 4ad21f5 (README: use markdown syntax,
2016-02-25), but that commit forgot to update git.spec.in, which
caused the rpmbuild target in the Makefile to fail.
Reported-by: Ron Isaacson <isaacson.ljits@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value of fprintf is unchecked, which may lead to
unreported errors. Use fprintf_or_die to report the error to the user.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
absolute_path() is designed to allow its callers to take a brief
peek of the result (typically, to be fed to functions like
strbuf_add() and relative_path() as a parameter) without having to
worry about freeing it, but the other side of the coin of that
memory model is that the caller shouldn't rely too much on the
result living forever--there may be a helper function the caller
subsequently calls that makes its own call to absolute_path(),
invalidating the earlier result.
Use xstrdup() to make our own copy, and free(3) it when we are done.
While at it, remove an unnecessary sm_gitdir_rel variable that was
only used to as a parameter to call absolute_path() and never used
again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When giving relative paths to `relative_path` to compute a relative path
from one directory to another, this may fail in `relative_path`.
Make sure both arguments to `relative_path` are always absolute.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We make sure that the parent directory of path exists (or create it
otherwise) and then do the same for path + "/.git".
That is equivalent to just making sure that the parent directory of
path + "/.git" exists (or create it otherwise).
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't dereference NULL 'path' if it was never assigned. Also
protect against an empty --path argument.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update --init --recursive" uses full path to refer to
the true location of the repository in the "gitdir:" pointer for
nested submodules; the command used to use relative paths.
This was reported by Norio Nomura in $gmane/290280.
The root cause for that bug is in using recursive submodules as
their relative path handling was broken in ee8838d (2015-09-08,
submodule: rewrite `module_clone` shell function in C).
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git send-pack with --all option
and a target repository specification ([<host>:]<directory>),
usage message is being displayed instead of performing
the actual transmission.
The reason for this issue is that destination and refspecs are being set
in the same conditional and are populated from argv. When a target
repository is passed, refspecs is being populated as well with its value.
This makes the check for refspecs not being NULL to always return true,
which, in conjunction with the check for --all or --mirror options,
is always true as well and returns usage message instead of proceeding.
This ensures that send-pack will stop execution only when --all
or --mirror switch is used in conjunction with any refspecs passed.
Signed-off-by: Stanislav Kolotinskiy <stanislav@assembla.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the two paths 'dir/A/file' and 'dir/B/file' have identical content
and the parent directory is renamed, e.g. 'git mv dir other-dir', then
diffcore reports the following exact renames:
renamed: dir/B/file -> other-dir/A/file
renamed: dir/A/file -> other-dir/B/file
While technically not wrong, this is confusing not only for the user,
but also for git commands that make decisions based on rename
information, e.g. 'git log --follow other-dir/A/file' follows
'dir/B/file' past the rename.
This behavior is a side effect of commit v2.0.0-rc4~8^2~14
(diffcore-rename.c: simplify finding exact renames, 2013-11-14): the
hashmap storing sources returns entries from the same bucket, i.e.
sources matching the current destination, in LIFO order. Thus the
iteration first examines 'other-dir/A/file' and 'dir/B/file' and, upon
finding identical content and basename, reports an exact rename.
Other hashmap users are apparently happy with the current iteration
order over the entries of a bucket. Changing the iteration order
would risk upsetting other hashmap users and would increase the memory
footprint of each bucket by a pointer to the tail element.
Fill the hashmap with source entries in reverse order to restore the
original exact rename detection behavior.
Reported-by: Bill Okara <billokara@gmail.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In MSVC2015 the behavior of vsnprintf was changed.
W/o this fix there is one character missing at the end.
Signed-off-by: Sven Strickroth <sven@cs-ware.de>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a branch is checked out by current working tree, deleting the
branch is forbidden. However when the branch is checked out only by
other working trees, deleting incorrectly succeeds.
Use find_shared_symref() to check if the branch is in use, not just
comparing with the current working tree's HEAD.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT_CMDMODE mechanism was introduced in the release of 1.8.5 to actively
notice when multiple "operation mode" options that specify mutually
incompatible operation modes are given.
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At builtin/checkout.c:1154, merge is a parameter to --conflict=<style>
(git checkout --conflict=merge).
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
At builtin/tag.c:23 French message translation, "<key-id>" was
translated to "<id-clé>", but at builtin/tag.c:355 "key-id" was
translated to "id de clé", hence an inconsistency in git tag -h output.
Translate "key-id" to "id-clé".
Alternatively, both places could use "id de clé" instead of "id-clé".
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
In the original source, tags and heads refer to that options (--head and
--tags) for git show-ref.
Don't translate that terms, since they refer to actual option names.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
"dir" was translated to the same string at builtin/log.c:1236,
but, also at that code line, "<dir>" was translate to "<répertoire>".
Before this commit, git format-patch -h would output "-o,
--output-directory <dir>" and <répertoire> in its description.
Use <répertoire> in both the parameter and description.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
* js/mingw-tests-2.8:
mingw: skip some tests in t9115 due to file name issues
t1300: fix the new --show-origin tests on Windows
t1300-repo-config: make it resilient to being run via 'sh -x'
config --show-origin: report paths with forward slashes
A fix for a small regression in "module_list" helper that was
rewritten in C (also applies to 2.7.x).
* sb/submodule-module-list-pathspec-fix:
submodule: fix regression for deinit without submodules
Junio C Hamano