This idea was suggested by Bill Lear
(Message-ID: <17920.38942.364466.642979@lisa.zopyra.com>)
and I think it is a very good one.
This patch adds a new test file for "git bisect run", but there
is currently only one basic test.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There has not been any work on the shallow stuff lately, so it is hard
to find out what it does, and how. This document describes the ideas
as well as the current problems, and can serve as a starting point for
shallow people.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Setting up a git-daemon came up the other day on IRC, and it is slightly
non trivial for the uninitiated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I think we can start to slow down, as we now have covered
everything I listed earlier in the short-term release plan.
The last release 1.5.0 took painfully too long.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new configuration variable core.deltaBaseCacheLimit allows the
user to control how much memory they are willing to give to Git for
caching base objects of deltas. This is not normally meant to be
a user tweakable knob; the "out of the box" settings are meant to
be suitable for almost all workloads.
We default to 16 MiB under the assumption that the cache is not
meant to consume all of the user's available memory, and that the
cache's main purpose was to cache trees, for faster path limiters
during revision traversal. Since trees tend to be relatively small
objects, this relatively small limit should still allow a large
number of objects.
On the other hand we don't want the cache to start storing 200
different versions of a 200 MiB blob, as this could easily blow
the entire address space of a 32 bit process.
We evict OBJ_BLOB from the cache first (credit goes to Junio) as
we want to favor OBJ_TREE within the cache. These are the objects
that have the highest inflate() startup penalty, as they tend to
be small and thus don't have that much of a chance to ammortize
that penalty over the entire data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Linux kernel, for example, it's common to include Cc: lines
for cases when you want to remember to cc someone on a patch without
necessarily claiming they signed off on it. Make git-send-email
aware of these.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I was using "branch" to mean "head", but that's perhaps a little
sloppy; so instead start by using the terms "branch head" and "head",
while still quickly falling back on "branch", since that's what
people actually say more frequently.
Also include glossary references on the first uses of "head" and "tag".
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The sort_glossary.pl script sorts the glossary, checks for duplicates,
and automatically adds cross-references.
But it's not so hard to do all that by hand, and sometimes the automatic
cross-references are a little wrong; so let's run the script one last
time and check in its output.
Note: to make the output fit better into the user manual I also deleted
the acknowledgements at the end, which was maybe a little rude; feel
free to object and I can find a different solution.
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
I'd like to start using references to the glossary in the user manual.
The "ref_" prefix for these references seems a little generic; so
replace with "def_".
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
"file patch" was doubtless intended to be "file path",
but "directory name" is clearer.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The --nonet option prevents xsltproc from going to the network to find
anything. But it always tries to find them locally first, so for a
user with the necessary docbook stylesheets installed the build will
work just fine without xsltproc attempting to use the network; all
--nonet does is make it fail rather than falling back on that. That
doesn't seem particularly helpful.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
This patch adds support for a dummy remote '.' to avoid having
to declare a fake remote like
[remote "local"]
url = .
fetch = refs/heads/*:refs/heads/*
Such a builtin remote simplifies the operation of "git-fetch",
which will populate FETCH_HEAD but will not pretend that two
repositories are in use, will not create a thin pack, and will
not perform any useless remapping of names. The speed
improvement is around 20%, and it should improve more if
"git-fetch" is converted to a builtin.
To this end, git-parse-remote is grown with a new kind of
remote, 'builtin'. In git-fetch.sh, we treat the builtin remote
specially in that it needs no pack/store operations. In fact,
doing git-fetch on a builtin remote will simply populate
FETCH_HEAD appropriately.
The patch also improves of the --track/--no-track support,
extending it so that branch.<name>.remote items referring '.'
can be created. Finally, it fixes a typo in git-checkout.sh.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This introduces a new command-line option: --exit-code. The diff
programs will return 1 for differences, return 0 for equality, and
something else for errors.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Previous formulation could make it appear as removing all lines
matching a regexp (at least, I was looking for such a flag, and
confused this flag for what I was looking for).
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This avoids fetching new revisions remotely, and is usefuly
versus plain "git rebase" because the user does not have to
specify which remote head to rebase against.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Format some lists really as lists. Improves both html and man
output.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-mergetool program can be used to automatically run an appropriate
merge resolution program to resolve merge conflicts. It will automatically
run one of kdiff3, tkdiff, meld, xxdiff, or emacs emerge programs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Chain-reply-to is a personal perference, and is unlikely to change from
patchset to patchset. Similarly, bcc is likely to have the same values
every invocation is one likes to bcc oneself.
So, allow both to be set via configuration variables.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Wishing to implement an email aliases file, I found that they were already
implmented. Document them for the next user.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov, Andy Parkins and Alex Riesen all pointed out that it
is possible for a single invocation of receive-pack to be given more
refs than the OS might allow us to pass as command line parameters
to a single hook invocation.
We don't want to break these up into multiple invocations (like
xargs might do) as that makes it impossible for the pre-receive
hook to verify multiple related ref updates occur at the same time,
and it makes it harder for post-receive to send out a single batch
notification.
Instead we pass the reference data on a pipe connected to the
hook's stdin, supplying one ref per line to the hook. This way a
single hook invocation can obtain an infinite amount of ref data,
without bumping into any operating system limits.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In order to track and build on top of a branch 'topic' you track from
your upstream repository, you often would end up doing this sequence:
git checkout -b mytopic origin/topic
git config --add branch.mytopic.remote origin
git config --add branch.mytopic.merge refs/heads/topic
This would first fork your own 'mytopic' branch from the 'topic'
branch you track from the 'origin' repository; then it would set up two
configuration variables so that 'git pull' without parameters does the
right thing while you are on your own 'mytopic' branch.
This commit adds a --track option to git-branch, so that "git
branch --track mytopic origin/topic" performs the latter two actions
when creating your 'mytopic' branch.
If the configuration variable branch.autosetupmerge is set to true, you
do not have to pass the --track option explicitly; further patches in
this series allow setting the variable with a "git remote add" option.
The configuration variable is off by default, and there is a --no-track
option to countermand it even if the variable is set.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Asciidoc appears to interpret a backslash at the end of a line as
escaping the end-of-line character, which screws up the display of
history diagrams like
o--o--o
\
o--...
The obvious fix (replacing "\" by "\\") doesn't work. The only
workaround I've found is to include all such diagrams in a LiteralBlock.
Asciidoc claims that should be equivalent to a literal paragraph, so I
don't understand why the difference--perhaps it's an asciidoc bug.
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
There should be a colon in this git-show example.
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
I used "git pull ." instead of "git merge" here without any explanation.
Stick instead to "git merge" for now (the equivalent pull syntax is
still covered in a later chapter).
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The configuration file fragment here is inconsistent with the text
above. Thanks to Ramsay Jones for the correction.
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The script sort_glossary.pl turns each use of "term" into a link to the
definition of "term". To avoid mangling links like
gitlink:git-term[1]
it doesn't replace any occurence of "term" preceded by "link:git-".
This fails for gitlink:git-symbolic-ref[1] when substituting for "ref".
So instead just refuse to replace anything preceded by a "-".
That could result in missing some opportunities, but that's a less
annoying error.
Actually I find the automatic substitution a little distracting; some
day maybe we should just run it once and commit the result, so it can
be hand-tuned.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The --interactive option behaves like "git commit", except that
"git add --interactive" is executed before committing. It is
incompatible with -a and -i.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm giving fast-import a lesson on how to reload the marks table
using the same format it outputs with --export-marks. This way
a frontend can reload the marks table from a prior import, making
incremental imports less painful.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Bill Lear pointed out that it is easy to send out notifications of
changes with the update hook, but successful execution of the update
hook does not necessarily mean that the ref was actually updated.
Lock contention on the ref or being unable to append to the reflog
may prevent the ref from being changed. Sending out notifications
prior to the ref actually changing is very misleading.
To help this situation I am introducing two new hooks to the
receive-pack flow: pre-receive and post-receive. These new hooks
are invoked only once per receive-pack execution and are passed
three arguments per ref (refname, old-sha1, new-sha1).
The new post-receive hook is ideal for sending out notifications,
as it has the complete list of all refnames that were successfully
updated as well as the old and new SHA-1 values. This allows more
interesting notifications to be sent. Multiple ref updates could
be easily summarized into one email, for example.
The new pre-receive hook is ideal for logging update attempts, as it
is run only once for the entire receive-pack operation. It can also
be used to verify multiple updates happen at once, e.g. an update
to the `maint` head must also be accompained by a new annotated tag.
Lots of documentation improvements for receive-pack are included
in this change, as we want to make sure the new hooks are clearly
explained.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds support to archimport for remapping the branch
names to match those used in git more closely. This is useful
for projects that migrate to git (as opposed to users that want
to use git on Arch-based projects). For example, one can choose
an Arch branch name and call it "master".
The new command-line syntax works even if there is a colon in
a branch name, since only the part after the last colon is taken
to be the git name (git does not allow colons in branch names).
The new feature is implemented so that archives rotated every
year can also be remapped into a single git archive.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most of the git-diff-* documentation used [<common diff options>]
instead of [--diff-options], so make that change in git-diff and
git-format-patch.
In addition, git-format-patch didn't include the meanings of the diff
options.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Theodore Ts'o