This test kicks in only if you built test-delta executable, and
makes sure that the basic delta routine is working properly even
on empty files.
This commit is to make sure we have a test to catch the
breakage. The delitifier code is still broken, which will be
fixed with the next commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a couple of tests to cover the following renaming
merge cases:
- one side renames and the other side does not, with and without
content conflicts.
- both side rename to the same path, with and without content
conflicts.
The test setup also prepares a case in which both side rename to
different destination, but currently the code collapses these
destination paths and removes the original path, which may be
wrong. The outcome of this case is not checked by the tests in
this round.
Signed-off-by: Junio C Hamano <junkio@cox.net>
People seem to be getting test failure from t6021 not becuase
git is faulty but because they forgot to install "merge". Check
this and other trivial pilot errors in the first test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is just a belts-and-suspenders check, but makes sure we
have both "git" and "git-init-db" built, executable, and
checking.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to catch an error where tests are run without first
building what are being tested. Relying on prefixing $PATH with
the build directory and expect that the PATH mechanism would
find what we just built would silently run an already installed
binaries from the PATH.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not everybody can rely on /bin/sh to be sane, and we support
SHELL_PATH for that. Use it.
mktemp(1) is not used anywhere else in the core git. Do not
introduce dependency on it.
Not everybody's "which" gives a sane return value. For example,
on Solaris 'which XXX' says "no XXX in /usr/bin /bin ..." and
exits with zero status. The lesson here is to never use 'which'
in your scripts.
Signed-off-by: Junio C Hamano <junkio@twinsun.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The test is considered OK if it exits with code $1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano, Sat, Nov 26, 2005 03:45:52 +0100:
> I haven't seriously used git-mv myself, so
> somebody needs to test it, and if it actually works and Ack on
> it, please.
It actually works in subdirs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The diff for this commit is a good illustration of what changed
in ls-tree behaviour.
- With -r, tree nodes themselves are not shown anymore, but
blobs in subtrees are shown.
- The order of paths parameters do not matter, since they are
not like arguments to /bin/ls, but are filter patterns.
- When filter patterns overlap, unintuitive things happen.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A .git/config like follows becomes valid with this patch:
[remote.junio]
url = git://git.kernel.org/pub/scm/git/git.git
pull = master:junio todo:todo +pu:pu
[remote.ibook]
url = ibook:git/
pull = master:ibook
push = master:quetzal
(This patch only does the ini file thing, git-fetch and friends still
ignore these values).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extend the regex syntax of value_regex so that prepending an exclamation
mark means non-match:
[core]
quetzal = "Dodo" for Brainf*ck
quetzal = "T. Rex" for Malbolge
quetzal = "cat"
You can match the third line with
git-config-set --get quetzal '! for '
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... namely
--replace-all, to replace any amount of matching lines, not just 0 or 1,
--get, to get the value of one key,
--get-all, the multivar version of --get, and
--unset-all, which deletes all matching lines from .git/config
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new option, --allow-binary-replacement, is introduced.
When you feed a diff that records full SHA1 name of pre- and
post-image blob on its index line to git-apply with this option,
the post-image blob replaces the path if what you have in the
working tree matches the pre-image _and_ post-image blob is
already available in the object directory.
Later we _might_ want to enhance the diff output to also include
the full binary data of the post-image, to make this more
useful, but this is good enough for local rebasing application.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Recently we fixed 'git-apply --stat' not to barf on a binary
differences. But it accidentally broke the error detection when
we actually attempt to apply them.
This commit fixes the problem and adds test cases.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The recently we updated rev-list --topo-order to show the heads
in date order, but we had a test that expected to see the old
behaviour.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git-update-ref create references with slashes in them. git-branch
and git-checkout already support such reference names.
git-branch can use git-update-ref to create the references in a more
formal manner now.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because a batch-oriented script creates many commits within a second
on a fast machine, show-branch output of the test results are unstable
without topo-order.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although it was shown that the "full contamination" was not really full
during the list discussion, the series improves things without incurring
extra parsing cost, and here is a test to check that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow failed tests to be ignored using make's "-i". The patch also
disables parallel make in t/. This doesn't make the testing any
different as before: the tests were run sequentially before.
It also allows to run more tests, ignoring the ones usually failing
just to figure out if something else broke. (Or to ignore plainly
uninteresting situations because of the testing being done on say...
cygwin ;)
Signed-off-by: Junio C Hamano <junkio@cox.net>
We checked the result of patch application for full permission bits,
when the only thing we cared about was to make sure the executable
bit was correctly set.
Noticed by Peter Baumann.
Signed-off-by: Junio C Hamano <junkio@cox.net>
For everyone cursed by dos/windows line endings (aka CRLF):
The code reading the .gitignore files (excludes and excludes per
directory) leaves \r in the patterns, which causes fnmatch to fail for
no obvious reason. Just remove a "\r" preceding a "\n"
unconditionally.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Linux, "mktemp tmp-XXXX" will not work. Also, redirect stderr on which,
so it does not complain too loudly. After all, this test should only be
executed when old binaries are available.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The next patches will extend the pack protocol. This test assures that this
extension is compatible to earlier versions of git-fetch-pack/git-upload-pack.
All you need to do to take advantage of this test, is to install older
known-to-be-working binaries in the path as "old-git-fetch-pack" and
"old-git-upload-pack".
Note that the warning when testing with old-git-fetch-pack is to be
expected (it just says that the old version was not taking advantage
of all the information which the server sent).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test provides a minimal example of what went wrong with the old
git-fetch-pack (and now works beautifully).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch allows the testsuite to run properly when the full path to
the git sources contains spaces or other symbols that need to be quoted.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the unoptimization. The previous round does not mind
missing fan-out directories, but still makes sure they exist, lest
older versions choke on a repository created/packed by it.
This round does not play that nicely anymore -- empty fan-out
directories are not created by init-db, and will stay removed by
prune-packed. The prune command also removes empty fan-out directories.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On FAT/NTFS, filenames cannot contain tabs. So t3300-funny-names would
reliably fail already when trying to create such files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Individual tests for hooks would want to have their own tests when
written. Also we should not pick up from random templates the user
happens to have.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Lacking reliable symlinks, the instructions in the tutorial did not work
in a cygwin setup. Also, a few outputs were not correct.
This patch fixes these, and adds a test case which follows the
instructions of the tutorial (except git-clone, -fetch and -push, which I
have not done yet).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-index-pack builds a pack index file for an existing packed
archive. With this utility a packed archive which was transferred
without the corresponding pack index can be added to objects/pack/
without repacking.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since cygwin does not install cpio by default, t5400 results in a very
cryptic failure. So, test for cpio explicitely.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes it possible to have a "sparse" git object subdirectory
structure, something that has become much more attractive now that people
use pack-files all the time.
As a result of pack-files, a git object directory doesn't necessarily have
any individual objects lying around, and in that case it's just wasting
space to keep the empty first-level object directories around: on many
filesystems the 256 empty directories will be aboue 1MB of diskspace.
Even more importantly, after you re-pack a project that _used_ to be
unpacked, you could be left with huge directories that no longer contain
anything, but that waste space and take time to look through.
With this change, "git prune-packed" can just do an rmdir() on the
directories, and they'll get removed if empty, and re-created on demand.
This patch also tries to fix up "write_sha1_from_fd()" to use the new
common infrastructure for creating the object files, closing a hole where
we might otherwise leave half-written objects in the object database.
[jc: I unoptimized the part that really removes the fan-out directories
to ease transition. init-db still wastes 1MB of diskspace to hold 256
empty fan-outs, and prune-packed rmdir()'s the grown but empty directories,
but runs mkdir() immediately after that -- reducing the saving from 150KB
to 146KB. These parts will be re-introduced when everybody has the
on-demand capability.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch fixes a bug in git-ls-tree in which the wrong filenames are
listed if the exact same file and directory contents are present in
another location in the tree.
Added a new series of test cases for directory and filename handling.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano