Using konsole, I get no colored output at the end of "t7005-editor.sh"
without this patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shuts down the "* ok ##: `test description`" messages.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test uses a rot13 filter, which is its own inverse. It tested only
that the content was the same as the original after both the 'clean' and
the 'smudge' filter were applied. This way it would not detect whether
any filter was run at all. Hence, here we add another test that checks
that the repository contained content that was processed by the 'clean'
filter.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When matching source and destination refs, we were failing
to pull the 'force' parameter from wildcard refspecs (but
not explicit ones) and attach it to the ref struct.
This adds a test for explicit and wildcard refspecs; the
latter fails without this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git may segfault if gitattributes contains an invalid
entry. A test is added to t0020 that triggers the segfault.
The parsing code is fixed to avoid the crash.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The first test (updating local refs) should succeed without the
prior commit, but the second one (not updating on error) used to
fail before the prior commit was written.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are in the middle of resolving a merge conflict there may be
one or more files whose entries in the index represent an unmerged
state (index entries in the higher-order stages).
Attempting to run git-blame on any file in such a working directory
resulted in "fatal: internal error: ce_mode is 0" as we use the magic
marker for an unmerged entry is 0 (set up by things like diff-lib.c's
do_diff_cache() and builtin-read-tree.c's read_tree_unmerged())
and the ce_match_stat_basic() function gets upset about this.
I'm not entirely sure that the whole "ce_mode = 0" case is a good
idea to begin with, and maybe the right thing to do is to remove
that horrid freakish special case, but removing the internal error
seems to be the simplest fix for now.
Linus
[sp: Thanks to Björn Steinbrink for the test case]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This allows one to easily retrieve a list of svn properties from within
git-svn without requiring svn or knowing the URL of a repository.
* git-svn.perl (%cmd): Add the command `proplist'.
(&cmd_proplist): New.
* t/t9101-git-svn-props.sh: Test git svn proplist.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This allows one to easily retrieve a single SVN property from within
git-svn without requiring svn or remembering the URL of a repository
* git-svn.perl (%cmd): Add the new command `propget'.
($cmd_dir_prefix): New global.
(&get_svnprops): New helper.
(&cmd_propget): New. Use &get_svnprops.
* t/t9101-git-svn-props.sh: Add a test case for propget.
[ew: make sure the rev-parse --show-prefix call doesn't break
the `git-svn clone' command]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git svn create-ignore (to create one .gitignore per directory
from the svn:ignore properties. This has the disadvantage of
committing the .gitignore during the next dcommit, but when you
import a repo with tons of ignores (>1000), using git svn show-ignore
to build .git/info/exclude is *not* a good idea, because things like
git-status will end up doing >1000 fnmatch *per file* in the repo,
which leads to git-status taking more than 4s on my Core2Duo 2Ghz 2G
RAM)
* git-svn.perl (%cmd): Add the new command `create-ignore'.
(&cmd_create_ignore): New.
* t/t9101-git-svn-props.sh: Adjust the test-case for show-ignore and
add a test case for create-ignore.
[ew: added commit message from
<05CAB148-56ED-4FF1-8AAB-4BA2A0B70C2C@lrde.epita.fr> ]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Earlier, "git filter-branch --<options> HEAD" would not update the
working tree after rewriting the branch. This commit fixes it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There are a few programs, such as config and diff, which allow running
without a git repository. Therefore, they have to call
setup_git_directory_gently().
However, when GIT_DIR and GIT_WORK_TREE were set, and the current
directory was a subdirectory of the work tree,
setup_git_directory_gently() would return a bogus NULL prefix.
This patch fixes that.
Noticed by REPLeffect on IRC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When doing "git fetch <remote>" on a remote that does not have the
branch referenced in branch.<current-branch>.merge, git fetch failed.
It failed because it tried to add the "merge" ref to the refs to be
fetched.
Fix that. And add a test case.
Incidentally, this unconvered a bug in our own test suite, where
"git pull <some-path>" was expected to merge the ref given in the
defaults, even if not pulling from the default remote.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The default behaviour of git-push is potentially confusing
for new users, since it will push changes that are not on
the current branch. Publishing patches that were still
cooking on a development branch is hard to undo.
It would also be nice to be able to verify the expansion
of refspecs if you've edited them, so that you know
what branches matched on the server.
Adding a --dry-run flag allows the user to experiment
safely and learn how to use git-push properly. Originally
suggested by Steffen Prohaska.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When a user runs "git fetch -t", git crashes when it doesn't find any
tags on the remote repository.
Signed-off-by: Väinö Järvelä <v@pp.inet.fi>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This fixes an unnecessary empty line that we add to the log message when
we generate diffs, but don't actually end up printing any due to having
DIFF_FORMAT_NO_OUTPUT set.
This can happen with pickaxe or with rename following. The reason is that
we normally add an empty line between the commit and the diff, but we do
that even for the case where we've then suppressed the actual printing of
the diff.
This also updates a couple of tests that assumed the extraneous empty
line would exist at the end of output.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This tests basic functionality and also exercises a bug noticed
by Keith Packard, (prune_cache followed by add_index_entry can
trigger an attempt to realloc a pointer into the middle of an
allocated buffer).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We lost rsync support when transitioning from shell to C. Support it
again (even if the transport is technically deprecated, some people just
do not have any chance to use anything else).
Also, add a test to t5510. Since rsync transport is not configured by
default on most machines, and especially not such that you can write to
rsync://127.0.0.1$(pwd)/, it is disabled by default; you can enable it by
setting the environment variable TEST_RSYNC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was determined on the mailing list, that it makes more sense for a
"squash" to keep the author of the first commit as the author for the
result of the squash.
Make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updated post-checkout hook to take a flag specifying whether the checkout is
a branch checkout or a file checkout (from the index).
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, rebase -i refused to rebase a detached HEAD. Now it no longer
does.
Incidentally, this fixes "git gc --auto" shadowing the true exit status.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the interporate() to replace entries with NULL values
by the empty string, and uses it to interpolate missing fields in
custom format output used in git-log and friends. It is most useful
to avoid <unknown> output from %b format for a commit log message
that lack any body text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing an "edit" on a commit, editing and git-adding some files,
"git rebase -i" complained about a missing "author-script". The idea was
that the user would call "git commit --amend" herself.
But we can be nice and do that for the user.
Noticed by Dmitry Potapov.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-send-email command line in the test was missing a single hyphen.
Signed-off-by: Glenn Rempe <glenn@rempe.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These new options can be used to control the policy for fast-forward
merges: --ff allows it (this is the default) while --no-ff will create
a merge commit.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options can be used to override --no-commit and --squash, which is
needed since --no-commit and --squash now can be specified as default merge
options in $GIT_DIR/config.
The change also introduces slightly different behavior for --no-commit:
when specified, it explicitly overrides --squash. Earlier,
'git merge --squash --no-commit' would result in a squashed merge (i.e. no
$GIT_DIR/MERGE_HEAD was created) but with this patch the command will
behave as if --squash hadn't been specified.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables per branch configuration of merge options. Currently, the most
useful options to specify per branch are --squash, --summary/--no-summary
and possibly --strategy, but all options are supported.
Note: Options containing whitespace will _not_ be handled correctly. Luckily,
the only option which can include whitespace is --message and it doesn't
make much sense to give that option a default value.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test-script excercises the porcelainish aspects of git-merge, and
does it thoroughly enough to detect a small bug already noticed by Junio:
squashing an octopus generates a faulty .git/SQUASH_MSG.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if you passed a revision and a path to svn cp, it meant to look
back at that revision and select that path. New behaviour is to get the
path then go back to the revision (like other commands that accept @REV
or -rREV do). The more consistent syntax is not supported by the old
tools, so we have to try both in turn.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older svn clients did not raise a 'transaction out of date' error here, but
trunk does - so 'svn up'.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'svn mv -m "rename to thunk"' was a local operation, therefore not
needing a commit message, it was silently ignored. Newer svn clients will
instead raise an error.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My prior bug fix for git-push titled "Don't configure remote "." to
fetch everything to itself" actually broke t5520 as we were unable
to evaluate a branch configuration of:
[branch "copy"]
remote = .
merge = refs/heads/master
as remote "." did not have a "remote...fetch" configuration entry to
offer up refs/heads/master as a possible candidate available to be
fetched and merged. In shell script git-fetch and prior to the above
mentioned commit this was hardcoded for a url of "." to be the set of
local branches.
Chasing down this bug led me to the conclusion that our prior behavior
with regards to branch.$name.merge was incorrect. In the shell script
based git-fetch implementation we only fetched and merged a branch if
it appeared both in branch.$name.merge *and* in remote.$r.fetch, where
$r = branch.$name.remote. In other words in the following config file:
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = refs/heads/master:refs/remotes/origin/master
[branch "master"]
remote = origin
merge = refs/heads/master
[branch "pu"]
remote = origin
merge = refs/heads/pu
Attempting to run `git pull` while on branch "pu" would always give
the user "Already up-to-date" as git-fetch did not fetch pu and thus
did not mark it for merge in .git/FETCH_HEAD. The configured merge
would always be ignored and the user would be left scratching her
confused head wondering why merge did not work on "pu" but worked
fine on "master".
If we are using the "default fetch" specification for the current
branch and the current branch has a branch.$name.merge configured
we now union it with the list of refs in remote.$r.fetch. This
way the above configuration does what the user expects it to do,
which is to fetch only "master" by default but when on "pu" to
fetch both "master" and "pu".
This uncovered some breakage in the test suite where old-style Cogito
branches (.git/branches/$r) did not fetch the branches listed in
.git/config for merging and thus did not actually merge them if the
user tried to use `git pull` on that branch. Junio and I discussed
it on list and felt that the union approach here makes more sense to
DWIM for the end-user than silently ignoring their configured request
so the test vectors for t5515 have been updated to include for-merge
lines in .git/FETCH_HEAD where they have been configured for-merge
in .git/config.
Since we are now performing a union of the fetch specification and
the merge specification and we cannot allow a branch to be listed
twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to
perform a double loop here over all of the branch.$name.merge lines
and try to set their merge flag if we have already schedule that
branch for fetching by remote.$r.fetch. If no match is found then
we must add new specifications to fetch the branch but not store it
as no local tracking branch has been designated.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This was actually reverted in 756373da by Junio. We no longer
support merging the right hand side of a fetchspec in a branch's
branch.$name.merge configuration setting as we interpret these
names as being only those published by the remote we are going to
fetch from.
The older shell based implementation of git-fetch did not report an
error when branch.$name.merge was referencing a branch that does
not exist on the remote and we are running `git fetch` for the
current branch. The new builtin-fetch does notice this failure
and aborts the fetch, thus breaking the tests.
Junio and I kicked it around on #git earlier today and decided that
the best approach here is to error out and tell the user that their
configuration is wrong, as this is likely more user friendly than
silently ignoring the user's request. Since the new builtin-fetch
is already issuing the error there is no code change required, we
just need to remove the bad configuration from our test.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Thanks to Johannes Schindelin for review and fixes, and Julian
Phillips for the original C translation.
This changes a few small bits of behavior:
branch.<name>.merge is parsed as if it were the lhs of a fetch
refspec, and does not have to exactly match the actual lhs of a
refspec, so long as it is a valid abbreviation for the same ref.
branch.<name>.merge is no longer ignored if the remote is configured
with a branches/* file. Neither behavior is useful, because there can
only be one ref that gets fetched, but this is more consistant.
Also, fetch prints different information to standard out.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The post-merge hook enables one to hook in for `git pull` operations in order
to check and/or change attributes of a work tree from the hook. As an example,
it can be used in combination with a pre-commit hook to save/restore file
ownership and permissions data (or file ACLs) within the repository and
transparently update the working tree after a `git pull` operation.
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier commit ece7b74903 added a test
for rebase that uses "am -3", but this adds a test to check "am -3"
itself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 098e711e caused git-push to match only branches when
considering which refs to push. This patch updates the
documentation accordingly and adds a test for this behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because a partial commit is meant to be a way to ignore what are
staged in the index, "git rm --cached A && git commit A" should
just record what is in A on the filesystem. The previous patch
made the command sequence to barf, saying that A has not been
added yet. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When making a partial commit, git-commit uses git-ls-files with
the --error-unmatch option to expand and sanity check the user
supplied path patterns. When any path pattern does not match
with the paths known to the index, it errors out, in order to
catch a common mistake to say "git commit Makefiel cache.h"
and end up with a commit that touches only cache.h (notice the
misspelled "Makefile"). This detection however does not work
well when the path has already been removed from the index.
If you drop a path from the index and try to commit that
partially, i.e.
$ git rm COPYING
$ git commit -m 'Remove COPYING' COPYING
the command complains because git does not know anything about
COPYING anymore.
This introduces a new option --with-tree to git-ls-files and
uses it in git-commit when we build a temporary index to
write a tree object for the partial commit.
When --with-tree=<tree-ish> option is specified, names from the
given tree are added to the set of names the index knows about,
so we can treat COPYING file in the example as known.
Of course, there is no reason to use "git rm" and git-aware
people have long time done:
$ rm COPYING
$ git commit -m 'Remove COPYING' COPYING
which works just fine. But this caused a constant confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" does not record index lines for pure mode changes (i.e. no
lines changed). Therefore, apply --index-info would call out a bogus
error.
Instead, fall back to reading the info from the current index.
Incidentally, this fixes an error where git-rebase would not rebase a
commit including a pure mode change, and changes requiring a threeway
merge.
Noticed and later tested by Chris Shoemaker.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to rely on the fact that cherry-pick would trigger the code path
to set limited = 1 in handle_commit(), when an uninteresting commit was
encountered.
However, when cherry picking between two independent branches, i.e. when
there are no merge bases, and there is only linear development (which can
happen when you cvsimport a fork of a project), no uninteresting commit
will be encountered.
So set limited = 1 when --cherry-pick was asked for.
Noticed by Martin Bähr.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because a partial commit is meant to be a way to ignore what are
staged in the index, "git rm --cached A && git commit A" should
just record what is in A on the filesystem. The previous patch
made the command sequence to barf, saying that A has not been
added yet. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to (almost) always show the name of the file without
relying on "-H" option of GNU grep, we used to add /dev/null to
the argument list unless we are doing -l or -L. This caused
"/dev/null:0" to show up when -c is given in the output.
It is not enough to add -c to the set of options we do not pass
/dev/null for. When we have too many files, we invoke grep
multiple times and we need to avoid giving a widow filename to
the last invocation -- otherwise we will not see the name.
This keeps two filenames when the argv[] buffer is about to
overflow and we have not finished iterating over the index, so
that the last round will always have at least two paths to work
with (and not require /dev/null).
An obvious and the only exception is when there is only 1 file
that is given to the underlying grep, and in that case we avoid
passing /dev/null and let the external "grep -c" report only the
number of matches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit fixed type-change case in "git add -u".
This adds a test to make sure we do not introduce regression.
At the same time, it fixes a stupid typo in the error message.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the strbuf conversion, result was a char pointer. The if
statement checked for it being not NULL, which meant that no
"$Format:...$" string had been found and no replacement had to be
made. format_subst() returned NULL in that case -- the caller
then simply kept the original file content, as it was unaffected
by the expansion.
The length of the string being 0 is not the same as the string
being NULL (expansion to an empty string vs. no expansion at all),
so checking result.len != 0 is not a full replacement for the old
NULL check.
However, I doubt the subtle optimization explained above resulted
in a notable speed-up anyway. Simplify the code and add the tail
of the file to the expanded string unconditionally.
[jc: added a test to expose the breakage this fixes]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder