In the previous commits, we converted `refs_create_symref()` to utilize
transactions to perform symref updates. Earlier `refs_create_symref()`
used `create_symref()` to do the same.
We can now remove `create_symref()` and any code associated with it
which is no longer used. We remove `create_symref()` code from all the
reference backends and also remove it entirely from the `ref_storage_be`
struct.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reference backends currently support transactional reference
updates. While this is exposed to users via 'git-update-ref' and its
'--stdin' mode, it is also used internally within various commands.
However, we do not support transactional updates of symrefs. This commit
adds support for symrefs in both the 'files' and the 'reftable' backend.
Here, we add and use `ref_update_has_null_new_value()`, a helper
function which is used to check if there is a new_value in a reference
update. The new value could either be a symref target `new_target` or a
OID `new_oid`.
We also add another common function `ref_update_check_old_target` which
will be used to check if the update's old_target corresponds to a
reference's current target.
Now transactional updates (verify, create, delete, update) can be used
for:
- regular refs
- symbolic refs
- conversion of regular to symbolic refs and vice versa
This also allows us to expose this to users via new commands in
'git-update-ref' in the future.
Note that a dangling symref update does not record a new reflog entry,
which is unchanged before and after this commit.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The files backend and the reftable backend implement
`original_update_refname` to obtain the original refname of the update.
Move it out to 'refs.c' and only expose it internally to the refs
library. This will be used in an upcoming commit to also introduce
another common functionality for the two backends.
We also rename the function to `ref_update_original_update_refname` to
keep it consistent with the upcoming other 'ref_update_*' functions
that'll be introduced.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `create_symref_locked()` creates a symref by creating a
'<symref>.lock' file and then committing the symref lock, which creates
the final symref.
Extract the early half of `create_symref_locked()` into a new helper
function `create_symref_lock()`. Because the name of the new function is
too similar to the original, rename the original to
`create_and_commit_symref()` to avoid confusion.
The new function `create_symref_locked()` can be used to create the
symref lock in a separate step from that of committing it. This allows
to add transactional support for symrefs, where the lock would be
created in the preparation step and the lock would be committed in the
finish step.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `ref_transaction_update()` obtains ref information and
flags to create a `ref_update` and add them to the transaction at hand.
To extend symref support in transactions, we need to also accept the
old and new ref targets and process it. This commit adds the required
parameters to the function and modifies all call sites.
The two parameters added are `new_target` and `old_target`. The
`new_target` is used to denote what the reference should point to when
the transaction is applied. Some functions allow this parameter to be
NULL, meaning that the reference is not changed.
The `old_target` denotes the value the reference must have before the
update. Some functions allow this parameter to be NULL, meaning that the
old value of the reference is not checked.
We also update the internal function `ref_transaction_add_update()`
similarly to take the two new parameters.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git for-each-ref" learned "--include-root-refs" option to show
even the stuff outside the 'refs/' hierarchy.
* kn/for-all-refs:
for-each-ref: add new option to include root refs
ref-filter: rename 'FILTER_REFS_ALL' to 'FILTER_REFS_REGULAR'
refs: introduce `refs_for_each_include_root_refs()`
refs: extract out `loose_fill_ref_dir_regular_file()`
refs: introduce `is_pseudoref()` and `is_headref()`
Introduce a new ref iteration flag `DO_FOR_EACH_INCLUDE_ROOT_REFS`,
which will be used to iterate over regular refs plus pseudorefs and
HEAD.
Refs which fall outside the `refs/` and aren't either pseudorefs or HEAD
are more of a grey area. This is because we don't block the users from
creating such refs but they are not officially supported.
Introduce `refs_for_each_include_root_refs()` which calls
`do_for_each_ref()` with this newly introduced flag.
In `refs/files-backend.c`, introduce a new function
`add_pseudoref_and_head_entries()` to add pseudorefs and HEAD to the
`ref_dir`. We then finally call `add_pseudoref_and_head_entries()`
whenever the `DO_FOR_EACH_INCLUDE_ROOT_REFS` flag is set. Any new ref
backend will also have to implement similar changes on its end.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract out the code for adding a single file to the loose ref dir as
`loose_fill_ref_dir_regular_file()` from `loose_fill_ref_dir()` in
`refs/files-backend.c`.
This allows us to use this function independently in the following
commits where we add code to also add pseudorefs to the ref dir.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reflog iterator tries to resolve the corresponding ref for every
reflog that it is about to yield. Historically, this was done due to
multiple reasons:
- It ensures that the refname is safe because we end up calling
`check_refname_format()`. Also, non-conformant refnames are skipped
altogether.
- The iterator used to yield the resolved object ID as well as its
flags to the callback. This info was never used though, and the
corresponding parameters were dropped in the preceding commit.
- When a ref is corrupt then the reflog is not emitted at all.
We're about to introduce a new `git reflog list` subcommand that will
print all reflogs that the refdb knows about. Skipping over reflogs
whose refs are corrupted would be quite counterproductive in this case
as the user would have no way to learn about reflogs which may still
exist in their repository to help and rescue such a corrupted ref. Thus,
the only remaining reason for why we'd want to resolve the ref is to
verify its refname.
Refactor the code to call `check_refname_format()` directly instead of
trying to resolve the ref. This is significantly more efficient given
that we don't have to hit the object database anymore to list reflogs.
And second, it ensures that we end up showing reflogs of broken refs,
which will help to make the reflog more useful.
Note that this really only impacts the case where the corresponding ref
is corrupt. Reflogs for nonexistent refs would have been returned to the
caller beforehand already as we did not pass `RESOLVE_REF_READING` to
the function, and thus `refs_resolve_ref_unsafe()` would have returned
successfully in that case.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref and reflog iterators share much of the same underlying code to
iterate over the corresponding entries. This results in some weird code
because the reflog iterator also exposes an object ID as well as a flag
to the callback function. Neither of these fields do refer to the reflog
though -- they refer to the corresponding ref with the same name. This
is quite misleading. In practice at least the object ID cannot really be
implemented in any other way as a reflog does not have a specific object
ID in the first place. This is further stressed by the fact that none of
the callbacks except for our test helper make use of these fields.
Split up the infrastucture so that ref and reflog iterators use separate
callback signatures. This allows us to drop the nonsensical fields from
the reflog iterator.
Note that internally, the backends still use the same shared infra to
iterate over both types. As the backends should never end up being
called directly anyway, this is not much of a problem and thus kept
as-is for simplicity's sake.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit we have converted the reflog iterator of the
"files" backend to be ordered, which was the only remaining ref iterator
that wasn't ordered. Refactor the ref iterator infrastructure so that we
always assume iterators to be ordered, thus simplifying the code.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When iterating through reflogs in a worktree we create a merged iterator
that merges reflogs from both refdbs. The resulting refs are ordered so
that instead we first return all worktree reflogs before we return all
common refs.
This is the only remaining case where a ref iterator returns entries in
a non-lexicographic order. The result would look something like the
following (listed with a command we introduce in a subsequent commit):
```
$ git reflog list
HEAD
refs/worktree/per-worktree
refs/heads/main
refs/heads/wt
```
So we first print the per-worktree reflogs in lexicographic order, then
the common reflogs in lexicographic order. This is confusing and not
consistent with how we print per-worktree refs, which are exclusively
sorted lexicographically.
Sort reflogs lexicographically in the same way as we sort normal refs.
As this is already implemented properly by the "reftable" backend via a
separate selection function, we simply pull out that logic and reuse it
for the "files" backend. As logs are properly sorted now, mark the
merged reflog iterator as sorted.
Tests will be added in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use a directory iterator to return reflogs via the reflog iterator.
This iterator returns entries in the same order as readdir(3P) would and
will thus yield reflogs with no discernible order.
Set the new `DIR_ITERATOR_SORTED` flag that was introduced in the
preceding commit so that the order is deterministic. While the effect of
this can only been observed in a test tool, a subsequent commit will
start to expose this functionality to users via a new `git reflog list`
subcommand.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of manually creating refs/ hierarchy on disk upon a
creation of a secondary worktree, which is only usable via the
files backend, use the refs API to populate it.
* ps/worktree-refdb-initialization:
builtin/worktree: create refdb via ref backend
worktree: expose interface to look up worktree by name
builtin/worktree: move setup of commondir file earlier
refs/files: skip creation of "refs/{heads,tags}" for worktrees
setup: move creation of "refs/" into the files backend
refs: prepare `refs_init_db()` for initializing worktree refs
Introduce a new extension "refstorage" so that we can mark a
repository that uses a non-default ref backend, like reftable.
* ps/refstorage-extension:
t9500: write "extensions.refstorage" into config
builtin/clone: introduce `--ref-format=` value flag
builtin/init: introduce `--ref-format=` value flag
builtin/rev-parse: introduce `--show-ref-format` flag
t: introduce GIT_TEST_DEFAULT_REF_FORMAT envvar
setup: introduce GIT_DEFAULT_REF_FORMAT envvar
setup: introduce "extensions.refStorage" extension
setup: set repository's formats on init
setup: start tracking ref storage format
refs: refactor logic to look up storage backends
worktree: skip reading HEAD when repairing worktrees
t: introduce DEFAULT_REPO_FORMAT prereq
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
The files ref backend will create both "refs/heads" and "refs/tags" in
the Git directory. While this logic makes sense for normal repositories,
it does not for worktrees because those refs are "common" refs that
would always be contained in the main repository's ref database.
Introduce a new flag telling the backend that it is expected to create a
per-worktree ref database and skip creation of these dirs in the files
backend when the flag is set. No other backends (currently) need
worktree-specific logic, so this is the only required change to start
creating per-worktree ref databases via `refs_init_db()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating the ref database we unconditionally create the "refs/"
directory in "setup.c". This is a mandatory prerequisite for all Git
repositories regardless of the ref backend in use, because Git will be
unable to detect the directory as a repository if "refs/" doesn't exist.
We are about to add another new caller that will want to create a ref
database when creating worktrees. We would require the same logic to
create the "refs/" directory even though the caller really should not
care about such low-level details. Ideally, the ref database should be
fully initialized after calling `refs_init_db()`.
Move the code to create the directory into the files backend itself to
make it so. This means that future ref backends will also need to have
equivalent logic around to ensure that the directory exists, but it
seems a lot more sensible to have it this way round than to require
callers to create the directory themselves.
An alternative to this would be to create "refs/" in `refs_init_db()`
directly. This feels conceptually unclean though as the creation of the
refdb is now cluttered across different callsites. Furthermore, both the
"files" and the upcoming "reftable" backend write backend-specific data
into the "refs/" directory anyway, so splitting up this logic would only
make it harder to reason about.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of `refs_init_db()` is to initialize the on-disk files of a
new ref database. The function is quite inflexible right now though, as
callers can neither specify the `struct ref_store` nor can they pass any
flags.
Refactor the interface to accept both of these. This will be required so
that we can start initializing per-worktree ref databases via the ref
backend instead of open-coding the initialization in "worktree.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to look up ref storage backends, we're currently using a linked
list of backends, where each backend is expected to set up its `next`
pointer to the next ref storage backend. This is kind of a weird setup
as backends need to be aware of other backends without much of a reason.
Refactor the code so that the array of backends is centrally defined in
"refs.c", where each backend is now identified by an integer constant.
Expose functions to translate from those integer constants to the name
and vice versa, which will be required by subsequent patches.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that `refs_delete_refs` is implemented in a generic way via the ref
transaction interfaces there are no callers left that invoke the
`delete_refs` callback anymore. Remove it from all of our backends.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both the files and the packed-refs reference backends now use the same
generic transactions-based code to delete references. Let's pull these
implementations up into `refs_delete_refs()` to deduplicate the code.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the `files_delete_refs()` callback function of the files backend we
implement deletion of references. This is done in two steps:
1. We lock the packed-refs file and delete all references from it in
a single transaction.
2. We delete all loose references via separate calls to
`refs_delete_ref()`.
These steps essentially duplicate the logic around locking and deletion
order that we already have in the transactional interfaces, where we do
know to lock and evict references from the packed-refs file. Despite the
fact that we duplicate the logic, it's also less efficient than if we
used a single generic transaction:
- The transactional interface knows to skip locking of the packed
refs in case they don't contain any of the refs which are about to
be deleted.
- We end up creating N+1 separate reference transactions, one for
the packed-refs file and N for the individual loose references.
Refactor the code to instead delete references via a single transaction.
As we don't assert the expected old object ID this is equivalent to the
previous behaviour, and we already do the same in the packed-refs
backend.
Despite the fact that the result is simpler to reason about, this change
also results in improved performance. The following benchmarks have been
executed in linux.git:
```
$ hyperfine -n '{rev}, packed={packed} refcount={refcount}' \
-L packed true,false -L refcount 1,1000 -L rev master,pks-ref-store-generic-delete-refs \
--setup 'git -C /home/pks/Development/git switch --detach {rev} && make -C /home/pks/Development/git -j17' \
--prepare 'printf "create refs/heads/new-branch-%d HEAD\n" $(seq {refcount}) | git -C /home/pks/Reproduction/linux.git update-ref --stdin && if test {packed} = true; then git pack-refs --all; fi' \
--warmup=10 \
'/home/pks/Development/git/bin-wrappers/git -C /home/pks/Reproduction/linux.git branch -d new-branch-{1..{refcount}}'
Benchmark 1: master packed=true refcount=1
Time (mean ± σ): 7.8 ms ± 1.6 ms [User: 3.4 ms, System: 4.4 ms]
Range (min … max): 5.5 ms … 11.0 ms 120 runs
Benchmark 2: master packed=false refcount=1
Time (mean ± σ): 7.0 ms ± 1.1 ms [User: 3.2 ms, System: 3.8 ms]
Range (min … max): 5.7 ms … 9.8 ms 180 runs
Benchmark 3: master packed=true refcount=1000
Time (mean ± σ): 283.8 ms ± 5.2 ms [User: 45.7 ms, System: 231.5 ms]
Range (min … max): 276.7 ms … 291.6 ms 10 runs
Benchmark 4: master packed=false refcount=1000
Time (mean ± σ): 284.4 ms ± 5.3 ms [User: 44.2 ms, System: 233.6 ms]
Range (min … max): 277.1 ms … 293.3 ms 10 runs
Benchmark 5: generic-delete-refs packed=true refcount=1
Time (mean ± σ): 6.2 ms ± 1.8 ms [User: 2.3 ms, System: 3.9 ms]
Range (min … max): 4.1 ms … 12.2 ms 142 runs
Benchmark 6: generic-delete-refs packed=false refcount=1
Time (mean ± σ): 7.1 ms ± 1.4 ms [User: 2.8 ms, System: 4.3 ms]
Range (min … max): 4.2 ms … 10.8 ms 157 runs
Benchmark 7: generic-delete-refs packed=true refcount=1000
Time (mean ± σ): 198.9 ms ± 1.7 ms [User: 29.5 ms, System: 165.7 ms]
Range (min … max): 196.1 ms … 201.4 ms 10 runs
Benchmark 8: generic-delete-refs packed=false refcount=1000
Time (mean ± σ): 199.7 ms ± 7.8 ms [User: 32.2 ms, System: 163.2 ms]
Range (min … max): 193.8 ms … 220.7 ms 10 runs
Summary
generic-delete-refs packed=true refcount=1 ran
1.14 ± 0.37 times faster than master packed=false refcount=1
1.15 ± 0.40 times faster than generic-delete-refs packed=false refcount=1
1.26 ± 0.44 times faster than master packed=true refcount=1
32.24 ± 9.17 times faster than generic-delete-refs packed=true refcount=1000
32.36 ± 9.29 times faster than generic-delete-refs packed=false refcount=1000
46.00 ± 13.10 times faster than master packed=true refcount=1000
46.10 ± 13.13 times faster than master packed=false refcount=1000
```
Especially in the case where we have many references we can see a clear
performance speedup of nearly 30%.
This is in contrast to the stated objecive in a27dcf89b6 (refs: make
delete_refs() virtual, 2016-09-04), where the virtual `delete_refs()`
function was introduced with the intent to speed things up rather than
making things slower. So it seems like we have outlived the need for a
virtual function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify the 'readdir' loop in 'loose_fill_ref_dir' to, rather than 'stat' a
file to determine whether it is a directory or not, use 'get_dtype'.
Currently, the loop uses 'stat' to determine whether each dirent is a
directory itself or not in order to construct the appropriate ref cache
entry. If 'stat' fails (returning a negative value), the dirent is silently
skipped; otherwise, 'S_ISDIR(st.st_mode)' is used to check whether the entry
is a directory.
On platforms that include an entry's d_type in in the 'dirent' struct, this
extra 'stat' check is redundant. We can use the 'get_dtype' method to
extract this information on platforms that support it (i.e. where
NO_D_TYPE_IN_DIRENT is unset), and derive it with 'stat' on platforms that
don't. Because 'stat' is an expensive call, this confers a
modest-but-noticeable performance improvement when iterating over large
numbers of refs (approximately 20% speedup in 'git for-each-ref' in a 30k
ref repo).
Unlike other existing usage of 'get_dtype', the 'follow_symlinks' arg is set
to 1 to replicate the existing handling of symlink dirents. This
unfortunately requires calling 'stat' on the associated entry regardless of
platform, but symlinks in the loose ref store are highly unlikely since
they'd need to be created manually by a user.
Note that this patch also changes the condition for skipping creation of a
ref entry from "when 'stat' fails" to "when the d_type is anything other
than DT_REG or DT_DIR". If a dirent's d_type is DT_UNKNOWN (either because
the platform doesn't support d_type in dirents or some other reason) or
DT_LNK, 'get_dtype' will try to derive the underlying type with 'stat'. If
the 'stat' fails, the d_type will remain 'DT_UNKNOWN' and dirent will be
skipped. However, it will also be skipped if it is any other valid d_type
(e.g. DT_FIFO for named pipes, DT_LNK for a nested symlink). Git does not
handle these properly anyway, so we can safely constrain accepted types to
directories and regular files.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enumerating refs in the packed-refs file, while excluding refs that
match certain patterns, has been optimized.
* tb/refs-exclusion-and-packed-refs:
ls-refs.c: avoid enumerating hidden refs where possible
upload-pack.c: avoid enumerating hidden refs where possible
builtin/receive-pack.c: avoid enumerating hidden references
refs.h: implement `hidden_refs_to_excludes()`
refs.h: let `for_each_namespaced_ref()` take excluded patterns
revision.h: store hidden refs in a `strvec`
refs/packed-backend.c: add trace2 counters for jump list
refs/packed-backend.c: implement jump lists to avoid excluded pattern(s)
refs/packed-backend.c: refactor `find_reference_location()`
refs: plumb `exclude_patterns` argument throughout
builtin/for-each-ref.c: add `--exclude` option
ref-filter.c: parameterize match functions over patterns
ref-filter: add `ref_filter_clear()`
ref-filter: clear reachable list pointers after freeing
ref-filter.h: provide `REF_FILTER_INIT`
refs.c: rename `ref_filter`
The subsequent patch will want to access an optional `excluded_patterns`
array within `refs/packed-backend.c` that will cull out certain
references matching any of the given patterns on a best-effort basis.
To do so, the refs subsystem needs to be updated to pass this value
across a number of different locations.
Prepare for a future patch by introducing this plumbing now, passing
NULLs at top-level APIs in order to make that patch less noisy and more
easily readable.
Signed-off-by: Taylor Blau <me@ttaylorr.co>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-refs" learns "--include" and "--exclude" to tweak the ref
hierarchy to be packed using pattern matching.
* jc/pack-ref-exclude-include:
pack-refs: teach pack-refs --include option
pack-refs: teach --exclude option to exclude refs from being packed
docs: clarify git-pack-refs --all will pack all refs
Allow users to be more selective over which refs to pack by adding an
--include option to git-pack-refs.
The existing options allow some measure of selectivity. By default
git-pack-refs packs all tags. --all can be used to include all refs,
and the previous commit added the ability to exclude certain refs with
--exclude.
While these knobs give the user some selection over which refs to pack,
it could be useful to give more control. For instance, a repository may
have a set of branches that are rarely updated and would benefit from
being packed. --include would allow the user to easily include a set of
branches to be packed while leaving everything else unpacked.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At GitLab, we have a system that creates ephemeral internal refs that
don't live long before getting deleted. Having an option to exclude
certain refs from a packed-refs file allows these internal references to
be deleted much more efficiently.
Add an --exclude option to the pack-refs builtin, and use the ref
exclusions API to exclude certain refs from being packed into the final
packed-refs file
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hash.h depends upon and includes repository.h, due to the definition and
use of the_hash_algo (defined as the_repository->hash_algo). However,
most headers trying to include hash.h are only interested in the layout
of the structs like object_id. Move the parts of hash.h that do not
depend upon repository.h into a new file hash-ll.h (the "low level"
parts of hash.h), and adjust other files to use this new header where
the convenience inline functions aren't needed.
This allows hash.h and object.h to be fairly small, minimal headers. It
also exposes a lot of hidden dependencies on both path.h (which was
brought in by repository.h) and repository.h (which was previously
implicitly brought in by object.h), so also adjust other files to be
more explicit about what they depend upon.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions were all defined in a separate ident.c already, so
create ident.h and move the declarations into that file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to handle worktree refs (worktrees/NAME/REF and
main-worktree/REF) existed in two places:
* ref_type() in refs.c
* parse_worktree_ref() in worktree.c
Collapse this logic together in one function parse_worktree_ref():
this avoids having to cross-check the result of parse_worktree_ref()
and ref_type().
Introduce enum ref_worktree_type, which is slightly different from
enum ref_type. The latter is a misleading name (one would think that
'ref_type' would have the symref option).
Instead, enum ref_worktree_type only makes explicit how a refname
relates to a worktree. From this point of view, HEAD and
refs/bisect/abc are the same: they specify the current worktree
implicitly.
The files-backend must avoid packing refs/bisect/* and friends into
packed-refs, so expose is_per_worktree_ref() separately.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refs code uses various polymorphic types (e.g., loose vs packed
ref_stores, abstracted iterators). Not every virtual function or
callback needs all of its parameters. Let's mark the unused ones to
quiet -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions used with for_each_ref(), etc, need to conform to the
each_ref_fn interface. But most of them don't need every parameter;
let's annotate the unused ones to quiet -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ab/refs-various-fixes:
refs debug: add a wrapper for "read_symbolic_ref"
packed-backend: remove stub BUG(...) functions
misc *.c: use designated initializers for struct assignments
refs: use designated initializers for "struct ref_iterator_vtable"
refs: use designated initializers for "struct ref_storage_be"
Updates to refs traditionally weren't fsync'ed, but we can
configure using core.fsync variable to do so.
* ps/fsync-refs:
core.fsync: new option to harden references
Karthik Nayak