As noted in CodingGuidelines, error messages should not be capitalized.
Fix up a few of these that were copied verbatim from merge-recursive to
match our modern style.
We'll likewise fix up the matching ones from merge-recursive. We care a
bit less there, since the hope is that it will eventually go away. But
besides being the right thing to do in the meantime, it is necessary for
t6406 to pass both with and without GIT_TEST_MERGE_ALGORITHM set (one of
our CI jobs sets it to "recursive", which will use the merge-recursive.c
code). An alternative would be to use "grep -i" in the test to check
the message, but it's nice for the test suite to be be more exact (we'd
notice if the capitalization fix regressed).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `--type=<type>` was added as a prefered alias for `--<type>` by
fb0dc3bac1 (builtin/config.c: support `--type=<type>` as preferred
alias for `--<type>`), the explanation for the path type was
reworded. Whereas the previous explanation said "expand a leading
`~`" this was changed to "adding a leading `~`". Change "adding" to
"expanding" to correctly explain the canonicalization.
Signed-off-by: Evan Gates <evan.gates@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To redact header lines in http/2 curl traces, we have to parse past some
prefix bytes that curl sticks in the info lines it passes to us. That
changed once already, and we adapted in db30130165 (http: handle both
"h2" and "h2h3" in curl info lines, 2023-06-17).
Now it has changed again, in curl's fbacb14c4 (http2: cleanup trace
messages, 2023-08-04), which was released in curl 8.3.0. Running a build
of git linked against that version will fail to redact the trace (and as
before, t5559 notices and complains).
The format here is a little more complicated than the other ones, as it
now includes a "stream id". This is not constant but is always numeric,
so we can easily parse past it.
We'll continue to match the old versions, of course, since we want to
work with many different versions of curl. We can't even select one
format at compile time, because the behavior depends on the runtime
version of curl we use, not the version we build against.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to parse out curl's http/2 trace lines so we can redact their
headers. We already match two different types of lines from various
vintages of curl. In preparation for adding another (which will be
slightly more complex), let's pull the matching into its own function,
rather than doing it in the middle of a conditional.
While we're doing so, let's expand the comment a bit to describe the two
matches. That probably should have been part of db30130165 (http: handle
both "h2" and "h2h3" in curl info lines, 2023-06-17), but will become
even more important as we add new types.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge_options parameter has never been used since the function was
introduced in 64aceb6d73 (merge-ort: add code to check for whether
cached renames can be reused, 2021-05-20). In theory some merge options
might impact our decisions here, but that has never been the case so
far.
Let's drop it to appease -Wunused-parameter; it would be easy to add
back later if we need to (there is only one caller).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes three trees representing the merge base and both
sides of the merge, but never looks at any of them. This is due to
f78cf97617 (merge-ort: call diffcore_rename() directly, 2021-02-14).
Prior to that commit, we passed pairs of trees to diff_tree_oid(). But
after that commit, we collect a custom diff_queue for each pair in the
merge_options struct, and just run diffcore_rename() on the result. So
the function does not need to know about the original trees at all
anymore.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function doesn't look at its merge_options parameter. It used to
pass it down to err(), but that function no longer exists (and didn't
look at "opt" anyway). We can drop it here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-ort code has an err() function, but it's really just error()
in disguise. It differs in two ways:
1. It takes a "struct merge_options" argument. But the function
completely ignores it! We can simply remove it.
2. It formats the error string into a strbuf, prepending "error: ",
and then feeds the result into error(). But this is wrong! The
error() function already adds the prefix, so we end up with:
error: error: Failed to execute internal merge
So let's just drop this function entirely and call error() directly, as
the functions are otherwise identical (note that they both always return
-1).
Presumably nobody noticed the bogus messages because they are quite hard
to trigger (they are mostly internal errors reading and writing
objects). However, one easy trigger is a custom merge driver which dies
by signal; we have a test already here, but we were not checking the
contents of stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References from description of the `--patch` option in various
manual pages have been simplified and improved.
* so/diff-doc-for-patch-update:
doc/diff-options: fix link to generating patch section
Various fixes to the behaviour of "rebase -i" when the command got
interrupted by conflicting changes.
* pw/rebase-i-after-failure:
rebase -i: fix adding failed command to the todo list
rebase --continue: refuse to commit after failed command
rebase: fix rewritten list for failed pick
sequencer: factor out part of pick_commits()
sequencer: use rebase_path_message()
rebase -i: remove patch file after conflict resolution
rebase -i: move unlink() calls
The default log message created by "git revert", when reverting a
commit that records a revert, has been tweaked.
* ob/revert-of-revert-is-reapply:
git-revert.txt: add discussion
sequencer: beautify subject of reverts of reverts
"git log --format" has been taught the %(decorate) placeholder.
* ak/pretty-decorate-more:
decorate: use commit color for HEAD arrow
pretty: add pointer and tag options to %(decorate)
pretty: add %(decorate[:<options>]) format
decorate: color each token separately
decorate: avoid some unnecessary color overhead
decorate: refactor format_decorations()
pretty-formats: enclose options in angle brackets
pretty-formats: define "literal formatting code"
We now limit depth of the tree objects and maximum length of
pathnames recorded in tree objects.
* jk/tree-name-and-depth-limit:
lower core.maxTreeDepth default to 2048
tree-diff: respect max_allowed_tree_depth
list-objects: respect max_allowed_tree_depth
read_tree(): respect max_allowed_tree_depth
traverse_trees(): respect max_allowed_tree_depth
add core.maxTreeDepth config
fsck: detect very large tree pathnames
tree-walk: rename "error" variable
tree-walk: drop MAX_TRAVERSE_TREES macro
tree-walk: reduce stack size for recursive functions
"git for-each-ref --sort='contents:size'" sorts the refs according
to size numerically, giving a ref that points at a blob twelve-byte
(12) long before showing a blob hundred-byte (100) long.
* ks/ref-filter-sort-numerically:
ref-filter: sort numerically when ":size" is used
When generating the list of packs to store in a MIDX (when given the
`--write-midx` option), we include any cruft packs both during
--geometric and non-geometric repacks.
But the rules for when we do and don't have to check whether any of
those cruft packs were queued for deletion differ slightly between the
two cases.
But the two can be unified, provided there is a little bit of extra
detail added in the comment to clarify when it is safe to avoid checking
for any pending deletions (and why it is OK to do so even when not
required).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `->util` field corresponding to each string_list_item is used to
track the existence of some pack at the beginning of a repack operation
was originally intended to be used as a bitfield.
This bitfield tracked:
- (1 << 0): whether or not the pack should be deleted
- (1 << 1): whether or not the pack is cruft
The previous commit removed the use of the second bit, but a future
patch (from a different series than this one) will introduce a new use
of it.
So we could stop treating the util pointer as a bitfield and instead
start treating it as if it were a boolean. But this would require some
backtracking when that later patch is applied.
Instead, let's avoid touching the ->util field directly, and instead
introduce convenience functions like:
- pack_mark_for_deletion()
- pack_is_marked_for_deletion()
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When repacking with the `--write-midx` option, we invoke the function
`midx_included_packs()` in order to produce the list of packs we want to
include in the resulting MIDX.
This list is comprised of:
- existing .keep packs
- any pack(s) which were written earlier in the same process
- any unchanged packs when doing a `--geometric` repack
- any cruft packs
Prior to this patch, we stored pre-existing cruft and non-cruft packs
together (provided those packs are non-kept). This meant we needed an
additional bit to indicate which non-kept pack(s) were cruft versus
those that aren't.
But alternatively we can store cruft packs in a separate list, avoiding
the need for this extra bit, and simplifying the code below.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is:
- at least one pre-existing packfile (which is not marked as kept),
- repacking with the `-d` flag, and
- not doing a cruft repack
, then we pass a handful of additional options to the inner
`pack-objects` process, like `--unpack-unreachable`,
`--keep-unreachable`, and `--pack-loose-unreachable`, in addition to
marking any packs we just wrote for promisor remotes as kept in-core
(with `--keep-pack`, as opposed to the presence of a ".keep" file on
disk).
Because we store both cruft and non-cruft packs together in the same
`existing.non_kept_packs` list, it suffices to check its `nr` member to
see if it is zero or not.
But a following change will store cruft- and non-cruft packs separately,
meaning this check would break as a result. Prepare for this by
extracting this part of the check into a new helper function called
`has_existing_non_kept_packs()`.
This patch does not introduce any functional changes, but prepares us to
make a more isolated change in a subsequent patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To remove redundant packs at the end of a repacking operation, Git uses
its `remove_redundant_pack()` function in a loop over the set of
pre-existing, non-kept packs.
In a later commit, we will split this list into two, one for
pre-existing cruft pack(s), and another for non-cruft pack(s). Prepare
for this by factoring out the routine to loop over and delete redundant
packs into its own function.
Instead of calling `remove_redundant_pack()` directly, we now will call
`remove_redundant_existing_packs()`, which itself dispatches a call to
`remove_redundant_packs_1()`. Note that the geometric repacking code
will still call `remove_redundant_pack()` directly, but see the previous
commit for more details.
Having `remove_redundant_packs_1()` exist as a separate function may
seem like overkill in this patch. However, a later patch will call
`remove_redundant_packs_1()` once over two separate lists, so this
refactoring sets us up for that.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To reduce the complexity of the already quite-long `cmd_repack()`
implementation, extract out the parts responsible for deleting redundant
packs from a geometric repack out into its own sub-routine.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of a repack (when given `-d`), Git attempts to remove any
packs which have been made "redundant" as a result of the repacking
operation. For example, an all-into-one (`-A` or `-a`) repack makes
every pre-existing pack which is not marked as kept redundant. Geometric
repacks (with `--geometric=<n>`) make any packs which were rolled up
redundant, and so on.
But before deleting the set of packs we think are redundant, we first
check to see whether or not we just wrote a pack which is identical to
any one of the packs we were going to delete. When this is the case, Git
must avoid deleting that pack, since it matches a pack we just wrote
(so deleting it may cause the repository to become corrupt).
Right now we only process the list of non-kept packs in a single pass.
But a future change will split the existing non-kept packs further into
two lists: one for cruft packs, and another for non-cruft packs.
Factor out this routine to prepare for calling it twice on two separate
lists in a future patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repack machinery needs to keep track of which packfiles were present
in the repository at the beginning of a repack, segmented by whether or
not each pack is marked as kept.
The names of these packs are stored in two `string_list`s, corresponding
to kept- and non-kept packs, respectively. As a consequence, many
functions within the repack code need to take both `string_list`s as
arguments, leading to code like this:
ret = write_cruft_pack(&cruft_po_args, packtmp, pack_prefix,
cruft_expiration, &names,
&existing_nonkept_packs, /* <- */
&existing_kept_packs); /* <- */
Wrap up this pair of `string_list`s into a single structure that stores
both. This saves us from having to pass both string lists separately,
and prepares for adding additional fields to this structure.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update an error message (which would probably never been seen).
* ob/sequencer-reword-error-message:
sequencer: fix error message on failure to copy SQUASH_MSG
Unused parameters to functions are marked as such, and/or removed,
in order to bring us closer to -Wunused-parameter clean.
* jk/unused-post-2.42-part2:
parse-options: mark unused parameters in noop callback
interpret-trailers: mark unused "unset" parameters in option callbacks
parse-options: add more BUG_ON() annotations
merge: do not pass unused opt->value parameter
parse-options: mark unused "opt" parameter in callbacks
parse-options: prefer opt->value to globals in callbacks
checkout-index: delay automatic setting of to_tempfile
format-patch: use OPT_STRING_LIST for to/cc options
merge: simplify parsing of "-n" option
merge: make xopts a strvec
The completion code can be told to use a particular completion for
aliases that shell out by using ': git <cmd> ;' as the first command of
the alias. This only works if <cmd> and the semicolon are separated by a
space, since if the space is missing __git_aliased_command returns (for
example) 'checkout;' instead of just 'checkout', and then
__git_complete_command fails to find a completion for 'checkout;'.
The examples have that space but it's not clear if it's just for
style or if it's mandatory. Explicitly mention it.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we added support for completing configured
trailer tokens in 'git commit --trailer'.
Make the implementation more robust by:
- using '__git' instead of plain 'git', as the rest of the completion
script does
- using a stricter pattern for --get-regexp to avoid false hits
- using 'cut' and 'rev' instead of 'awk' to account for tokens including
dots.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was introduced by 56dc3ab04 ("sequencer (rebase -i): implement the
'edit' command", 2017-01-02), and was pointless from the get-go: all
early exits from the loop above are returns, so todo_list->current ==
todo_list->nr is an invariant after the loop.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test was introduced by commit 0c164ae7a ("rebase -i: add another
reword test", 2021-08-20). I didn't quite get what it was meant to do,
so here's an explanation from Phillip:
The purpose of the test is to ensure that
(i) There are no uncommitted changes when the editor runs. i.e., we
commit without running the editor and then reword by amending
that commit. This ensures that we have the same user experience
whether or not the commit was fast-forwarded [1].
(ii) That the todo list is re-read after the commit has been reworded.
This is to allow the user to update the todo list while the rebase
is paused for editing the commit message.
[1] https://lore.kernel.org/git/20190812175046.GM20404@szeder.dev/
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As "git update-index --show-index-version" can do the same thing,
the 'index-version' subcommand in the test-tool lost its reason to
exist. Remove it and replace its use with the end-user facing
'git update-index --show-index-version'.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index --index-version N" is used to set the index format
version to a specific version, but there was no way to query the
current version used in the on-disk index file.
Teach the command a new "--show-index-version" option, and also
teach the "--index-version N" option to report what the version was
when run with the "--verbose" option.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Being invented in late 2012 no longer makes the index v4 format
"relatively young".
The support for the index version 4 was added to libgit2 with their
5625d86b (index: support index v4, 2016-05-17) and to JGit with
their e9cb0a8e (DirCache: support index V4, 2020-08-10).
Let's update the paragraph that discouraged its use for folks overly
cautious about cross-tool compatibility.
Helped-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git diff-index` may return incorrect deleted entries when fsmonitor
is used in a repository with git submodules. This can be observed on
Mac machines, but it can affect all other supported platforms too.
If fsmonitor is used, `stat *st` is not initialized if cache_entry has
CE_FSMONITOR_VALID set. But, there are three call sites that rely on stat
afterwards, which can result in incorrect results.
This change partially reverts commit 4f3d6d02 (fsmonitor: skip lstat
deletion check during git diff-index, 2021-03-17).
Signed-off-by: Josip Sokcevic <sokcevic@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running in the Windows Subsystem for Linux (WSL), it is usually
necessary to use the Git Credential Manager for authentication when
performing the background fetches.
This requires interoperability between the Windows Subsystem for Linux
and the Windows host to work, which uses so-called vsocks, i.e. sockets
intended for communcations between virtual machines and the host they
are running on.
However, when Git is configured to run background maintenance via
`systemd`, the address families available to those maintenance processes
are restricted, and did not include `AF_VSOCK`. This leads to problems
e.g. when a background fetch tries to access github.com:
systemd[437]: Starting Optimize Git repositories data...
git[747387]: WSL (747387) ERROR: UtilBindVsockAnyPort:285: socket failed 97
git[747381]: fatal: could not read Username for 'https://github.com': No such device or address
git[747381]: error: failed to prefetch remotes
git[747381]: error: task 'prefetch' failed
systemd[437]: git-maintenance@hourly.service: Main process exited, code=exited, status=1/FAILURE
systemd[437]: git-maintenance@hourly.service: Failed with result 'exit-code'.
systemd[437]: Failed to start Optimize Git repositories data.
Address this (pun intended) by adding the `AF_VSOCK` address family to
the allow list.
This fixes https://github.com/microsoft/git/issues/604.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When -R is given, queue_diff() swaps the mode and name variables of the
two files to produce a reverse diff. 1e3f26542a (diff --no-index:
support reading from named pipes, 2023-07-05) added variables that
indicate whether files are special, i.e named pipes or - for stdin.
These new variables were not swapped, though, which broke the handling
of stdin with with -R. Swap them like the other metadata variables.
Reported-by: Martin Storsjö <martin@martin.st>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, process_command_line_args did two things:
(1) parse trailers from the configuration, and
(2) parse trailers defined on the command line.
Separate (1) outside to a new function, parse_trailers_from_config.
Rename the remaining logic to parse_trailers_from_command_line_args.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, process_input_file does three things:
(1) parse the input string for trailers,
(2) print text before the trailers, and
(3) calculate the position of the input where the trailers end.
Rename this function to parse_trailers(), and make it only do
(1). The caller of this function, process_trailers, becomes responsible
for (2) and (3). These items belong inside process_trailers because they
are both concerned with printing the surrounding text around
trailers (which is already one of the immediate concerns of
process_trailers).
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fields here are not meant to be used by downstream callers, so put
them behind an anonymous struct named as "internal" to warn against
their use. This follows the pattern in 576de3d956 (unpack_trees: start
splitting internal fields from public API, 2023-02-27).
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git switch --track ` is to be completed, only remote refs are
eligible because that is what the `--track` option targets.
And when the short-hand `-t` is used instead, the same _should_ happen.
Let's make it so.
Note that the bug exists both in the completions of `switch` and
`completion`, even if it manifests in slightly different ways: While
the completion of `git switch -t ` will not even look at remote refs,
the completion of `git checkout -t ` will look at both remote _and_
local refs. Both should look only at remote refs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --rfc --subject-prefix=<foo>" used to ignore the
"--subject-prefix" option and used "[RFC PATCH]"; now we will add
"RFC" prefix to whatever subject prefix is specified.
This is a backward compatible change that may deserve a note.
* dd/format-patch-rfc-updates:
format-patch: --rfc honors what --subject-prefix sets
Unused parameters to functions are marked as such, and/or removed,
in order to bring us closer to -Wunused-parameter clean.
* jk/unused-post-2.42: (22 commits)
update-ref: mark unused parameter in parser callbacks
gc: mark unused descriptors in scheduler callbacks
bundle-uri: mark unused parameters in callbacks
fetch: mark unused parameter in ref_transaction callback
credential: mark unused parameter in urlmatch callback
grep: mark unused parmaeters in pcre fallbacks
imap-send: mark unused parameters with NO_OPENSSL
worktree: mark unused parameters in noop repair callback
negotiator/noop: mark unused callback parameters
add-interactive: mark unused callback parameters
grep: mark unused parameter in output function
test-trace2: mark unused argv/argc parameters
trace2: mark unused config callback parameter
trace2: mark unused us_elapsed_absolute parameters
stash: mark unused parameter in diff callback
ls-tree: mark unused parameter in callback
commit-graph: mark unused data parameters in generation callbacks
worktree: mark unused parameters in each_ref_fn callback
pack-bitmap: mark unused parameters in show_object callback
ref-filter: mark unused parameters in parser callbacks
...
Jeff King