kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Mike Ralphson	1168d402d2	Documentation: typos / spelling fixes Signed-off-by: Mike Ralphson <mike@abacus.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Abhijit Menon-Sen	f448e24e2f	Make the DESCRIPTION match <x>... items in the SYNOPSIS When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION also mentions "<path>..." and says the specified "paths" (note plural) are used for $whatever. This fixes the obvious mismatches. Signed-off-by: Abhijit Menon-Sen <ams@toroid.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jonathan Nieder	ba020ef5eb	manpages: italicize git command names (which were in teletype font) The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.])\`/'\''\1'\''/g; print }' } for i in git.txt config.txt diff.txt blame.txt fetch.txt i18n.txt \ merge.txt pretty.txt pull.txt rev.txt urls.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jonathan Nieder	b1889c36d8	Documentation: be consistent about "git-" versus "git " Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Stephan Beyer	3240240ff4	Docs: Use "-l::\n--long\n" format in OPTIONS sections The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f\|--foo:: -f \| --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Lea Wiemann	c0f6dc9b20	git-for-each-ref.txt: minor improvements Rewrapped synopsis and removed wrong asterisk behind --count option; clarified --sort=<key> description for multiple keys; documented that for-each-ref supports not only glob patterns but also prefixes like "refs/heads" as patterns, and that multiple patterns can be given. Signed-off-by: Lea Wiemann <LeWiemann@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Andy Parkins	d392e712a8	Make for-each-ref's grab_date() support per-atom formatting grab_date() gets an extra parameter - atomname; this extra parameter is checked to see if it has a ":<format>" extra component in it, and if so that "<format>" string is passed to parse_date_format() to produce an enum date_mode value which is then further passed to show_date(). In short it allows the user of git-for-each-ref to do things like this: $ git-for-each-ref --format='%(taggerdate:default)' refs/tags/v1.5.2 Sun May 20 00:30:42 2007 -0700 $ git-for-each-ref --format='%(taggerdate:relative)' refs/tags/v1.5.2 4 months ago $ git-for-each-ref --format='%(taggerdate:short)' refs/tags/v1.5.2 2007-05-20 $ git-for-each-ref --format='%(taggerdate:local)' refs/tags/v1.5.2 Sun May 20 08:30:42 2007 $ git-for-each-ref --format='%(taggerdate:iso8601)' refs/tags/v1.5.2 2007-05-20 00:30:42 -0700 $ git-for-each-ref --format='%(taggerdate:rfc2822)' refs/tags/v1.5.2 Sun, 20 May 2007 00:30:42 -0700 The default, when no ":<format>" is specified is ":default", leaving the existing behaviour unchanged. Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Matthias Kestenholz	97925fde00	Documentation: Reformatted SYNOPSIS for several commands Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Andy Parkins	69057cf39f	git-for-each-ref doesn't return "the bit after $GIT_DIR/refs" The documentation for git-for-each-ref said that the refname variable would return "the part after $GIT_DIR/refs/", which isn't true. Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Shawn O. Pearce	5558e55c06	Teach for-each-ref about a little language called Tcl. Love it or hate it, some people actually still program in Tcl. Some of those programs are meant for interfacing with Git. Programs such as gitk and git-gui. It may be useful to have Tcl-safe output available from for-each-ref, just like shell, Perl and Python already enjoy. Thanks to Sergey Vlasov for pointing out the horrible flaws in the first and second version of this patch, and steering me in the right direction for Tcl value quoting. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
René Scharfe	23bfbb815d	Documentation: a few spelling fixes Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	1dc5e55f2d	Documentation: fix git-format-patch mark-up and link it from git.txt Two asterisks the SYNOPSIS section were mistaken as emphasis, and the latter backtick in "`<key>`s" were not recognized as closing backtick. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Jakub Narebski	ba7545adab	Documentation: Update information about <format> in git-for-each-ref Update information about value of <format> used when it is left unspecified. Add information about `%%` and `%xx` interpolation (URL encoding). Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Andy Whitcroft	1729fa9878	git-for-each-ref: improve the documentation on scripting modes When reading the synopsis for git-for-each-ref it is easy to miss the obvious power of --shell and family. Call this feature out in the primary paragragh. Also add more description to the examples to indicate which features we are demonstrating. Finally add a very simple eval based example in addition to the very complex one to give a gentler introduction. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	9f613ddd21	Add git-for-each-ref: helper for language bindings This adds a new command, git-for-each-ref. You can have it iterate over refs and have it output various aspects of the objects they refer to. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago

15 Commits (445cac18c015809a7fcb4a570d3c6571b1ddaf7d)