Extract author email to 'author_email' key, and comitter mail to
'committer_mail' key; uniquify committer and author lines handling
by the way.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use "git show-ref --dereference" instead of "git peek-remote
$projectroot/project" in git_get_references. git-show-ref is faster
than git-peek-remote (40ms vs 56ms user+sys for git.git repository);
even faster is reading info/refs file (if it exists), but the
information in info/refs can be stale; that and the fact that
info/refs is meant for dumb protocol transports, not for gitweb.
git-show-ref is available since v1.4.4; the output format is slightly
different than git-peek-remote output format, but we accept both.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not use esc_html in esc_path subroutine to avoid double quoting;
expand esc_html body (except quoting) in esc_path.
Move esc_path before quot_cec and quot_upr. Add some comments.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It seems that gitweb tries to consistently use chomp without parentheses
around its operands, but there were two places that said "chomp($var);".
Let's be consistent.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit messages had SPC replaced with entity;
make it so also in tag message (tag comment).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This finishes work started by commit 4777b0141a
"gitweb: Restore object-named links in item lists"
by Petr Baudis. It brings back rest of "blob" links in difftree-raw
like part of "commit" and "commitdiff" views, namely in
git_difftree_body subroutine.
Now the td.link table cell has the following links:
* link to diff ("blobdiff" view) in "commit" view, if applicable
(there is no link to uninteresting creation/deletion diff), or
link to patch anchor in "commitdiff" view.
* link to current version of file ("blob" view), with the obvious
exception of file deletion, where it is link to the parent
version.
* link to "blame" view, if it is enabled, and file was not just
created (i.e. it has any history).
* link to history of the file ("history" view), again with sole
exception of the case of new file.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add support for more modern Atom web feed format. Both RSS and Atom
feeds are generated by git_feed subroutine to avoid code duplication;
git_rss and git_atom are thin wrappers around git_feed. Add links to
Atom feed in HTML header and in page footer (but not in OPML; we
should use APP, Atom Publishing Proptocol instead).
Allow for feed generation for branches other than current (HEAD)
branch, and for generation of feeds for file or directory history.
Do not use "pre ${\sub_returning_scalar(...)} post" trick, but join
strings instead: "pre " . sub_returning_scalar(...) . " post".
Use href(-full=>1, ...) instead of hand-crafting gitweb urls.
Make output prettier:
* Use title similar to the title of web page
* Use project description (if exists) for description/subtitle
* Do not add anything (committer name, commit date) to feed entry title
* Wrap the commit message in <pre>
* Make file names into an unordered list
* Add links (diff, conditional blame, history) to the file list.
In addition to the above points, the attached patch emits a
Last-Changed: HTTP response header field, and doesn't compute the feed
body if the HTTP request type was HEAD. This helps keep the web server
load down for well-behaved feed readers that check if the feed needs
updating.
If browser (feed reader) sent Accept: header, and it prefers 'text/xml' type
to 'application/rss+xml' (in the case of RSS feed) or 'application/atom+xml'
(in the case of Atom feed), then use 'text/xml' as content type.
Both RSS and Atom feeds validate at http://feedvalidator.org
and at http://validator.w3.org/feed/
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Andreas Fuchs <asf@boinkor.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
href subroutine by default generates absolute URL (generated using
CGI::url(-absolute=>1), and saved in $my_uri) using $my_uri as base;
add an option to generate full URL using $my_url as base.
New feature usage: href(..., -full=>1)
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we have provided enough info, and diff is not combined diff,
and if provided diff line is chunk header, then:
* split chunk header into .chunk_info and .section span elements,
first containing proper chunk header, second section heading
(aka. which function), for separate styling: the proper chunk
header is on non-white background, section heading part uses
slightly lighter color.
* hyperlink from-file-range to starting line of from-file, if file
was not created.
* hyperlink to-file-range to starting line of to-file, if file
was not deleted.
Links are of invisible variety (and "list" class).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Set $hash parameter to $hash_base || "HEAD" if it is not set (if it is
not true to be more exact). This allows [hand-edited] URLs with 'action'
"commit" or "commitdiff" but without 'hash' parameter.
If there is 'h' (hash) parameter provided, then gitweb tries
to use this. HEAD is used _only_ if nether hash, nor hash_base
are provided, i.e. for URL like below
URL?p=project.git;a=commit
i.e. without neither 'h' nor 'hb'.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There are some cases when one line from "raw" git-diff output (raw format)
corresponds to more than one patch in the patchset git-diff output. To deal
with this buffer git diff header and extended diff header (everything up to
actual patch) to check from information from "index <hash>..<hash>" extended
header line if the patch corresponds to the same or next difftree raw line.
This could also be used to gather information needed for hyperlinking, and
used for printing gitweb quoted filenames, from extended diff header instead
of raw git-diff output.
While at it, refactor git_patchset_body subroutine from the event-driven,
AWK-like state-machine parsing to sequential parsing: for each patch
parse (and output) git diff header, parse extended diff header, parse two-line
from-file/to-file diff header, parse patch itself; patch ends with the end
of input [file] or the line matching m/^diff /.
For better understanding the code, there were added assertions in the
comments a la Carp::Assert module. Just in case there is commented out code
dealing with unexpected end of input (should not happen, hence commented
out).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We may read an undef from <$fd> and unconditionally chomping it
would result in a warning.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Looks like a repo.or.cz-specific change slipped in.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The same change as the previous. It is rather sad that commit log
message parser gives list of chomped lines while tag message parser
gives unchomped ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This revealed that the output from blame and tag was not chomped
properly and was relying on HTML output not noticing that extra
whitespace that resulted from the newline, which was also fixed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace "gitweb diff header" with its full sha1 of blobs and replace
it by "git diff" header and extended diff header. Change also somewhat
highlighting of diffs.
Added `file_type_long' subroutine to convert file mode in octal to
file type description (only for file modes which used by git).
Changes:
* "gitweb diff header" which looked for example like below:
file:_<sha1 before>_ -> file:_<sha1 after>_
where 'file' is file type and '<sha1>' is full sha1 of blob is
changed to
diff --git _a/<file before>_ _b/<file after>_
In both cases links are visible and use default link style. If file
is added, a/<file> is not hyperlinked. If file is deleted, b/<file>
is not hyperlinked.
* there is added "extended diff header", with <path> and <hash>
hyperlinked (and <hash> shortened to 7 characters), and <mode>
explained: '<mode>' is extended to '<mode> (<file type description>)',
where added text is slightly lighter to easy distinguish that it
was added (and it is difference from git-diff output).
* from-file/to-file two-line header lines have slightly darker color
than removed/added lines.
* chunk header has now delicate line above for easier finding chunk
boundary, and top margin of 2px, both barely visible.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of simply hiding control characters in esc_path by replacing
them with '?', use Character Escape Codes (CEC) i.e. alphabetic
backslash sequences like those found in C programming language and
many other languages influenced by it, such as Java and Perl. If
control characted doesn't have corresponding character escape code,
use octal char sequence to escape it.
Alternatively, controls can be replaced with Unicode Control
Pictures U+2400 - U+243F (9216 - 9279), the Unicode characters
reserved for representing control characters when it is
necessary to print or display them.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extend unquote subroutine, which unquotes quoted and escaped filenames
which git may return, to deal not only with octal char sequence
quoting, but also quoting ordinary characters including '\"' and '\\'
which are respectively quoted '"' and '\', and to deal also with
C escape sequences including '\t' for TAB and '\n' for LF.
Add esc_path subroutine for gitweb quoting and HTML escaping filenames
(currently it does equivalent of ls' --hide-control-chars, which means
showing undisplayable characters (including '\n' and '\t') as '?'
(question mark) character, and use 'span' element with cntrl CSS class
to help rendering them differently.
Convert gitweb to use esc_path correctly to print pathnames.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A forked project is defined to be $projname/$forkname.git for
$projname.git; the code did not check this correctly and mistook
$projname/.git to be a fork of itself. This minimally fixes the
breakage.
Also forks were not checked when index.aux file was in use.
Listing the forked ones in index.aux would show them also on the
toplevel index which may go against the hierarchical nature of
forks, but again this is a minimal fix to whip it in a better
shape suitable to be in the 'master' branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Apparently this code was never tested without "forks". check-feature
returns a one-element list (0) when disabled, and assigning that to a
scalar variable made it to be called in a scalar context, which meant
my $check_forks = gitweb_check_feature("forks") were always 1!
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this change we get a wrong $pfxlen value and the check_export_ok()
checks with with a wrong directory name. Without this patch the below
$projects_list fails with gitweb
$projects_list = "/tmp/a/b/";
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add option to replace SPC (' ') with hard (non-breakable) space HTML
entity ' ' in esc_html subroutine.
Replace ' ' with ' ' for the code/diff display part in git_blob
and git_patchset_body; this is to be able to view code and diffs in
web browsers which doesn't understand "white-space: pre;" CSS
declaration.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove skipping over empty patches (i.e. patches which consist solely
of extended headers) in git_patchset_body, and add links to those
header-only patches in git_difftree_body (but not generate blobdiff
links when there were no change in file contents).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add two subroutines: git_get_heads_list and git_get_refs_list, which
fill out needed parts of refs info (heads and tags respectively) info
using single call to git-for-each-ref, instead of using
git-peek-remote to get list of references and using parse_ref for each
ref to get ref info, which in turn uses at least one call of git
command.
Replace call to git_get_refs_list in git_summary by call to
git_get_references, git_get_heads_list and git_get_tags_list
(simplifying this subroutine a bit). Use git_get_heads_list in
git_heads and git_get_tags_list in git_tags. Modify git_tags_body
slightly to accept output from git_get_tags_list.
Remove no longer used, and a bit hackish, git_get_refs_list.
parse_ref is no longer used, but is left for now.
Generating "summary" and "tags" views should be much faster for
projects which have large number of tags.
CHANGES IN OUTPUT: Before, if ref in refs/tags was tag pointing to
commit we used committer epoch as epoch for ref, and used tagger epoch
as epoch only for tag pointing to object of other type. If ref in
refs/tags was commit, we used committer epoch as epoch for ref (see
parse_ref; we sorted in gitweb by 'epoch' field).
Currently we use committer epoch for refs pointing to commit objects,
and tagger epoch for refs pointing to tag object, even if tag points
to commit.
Simple ab benchmark before and after this patch for my git.git
repository (git/jnareb-git.git) with some heads and tags added
as compared to git.git repository, shows around 2.4-3.0 times speedup
for "summary" and "tags" views:
summary 3134 +/- 24.2 ms --> 1081 +/- 30.2 ms
tags 2886 +/- 18.9 ms --> 1196 +/- 15.6 ms
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use 's' (treat string as single line) regexp modifier in
git_get_hash_by_path (against future changes, probably unnecessary)
and in parse_ls_tree_line (when called with '-z'=>1 option) to secure
against filenames containing newline.
[jc: the hunk on git_get_hash_by_path was unneeded, and I noticed the
regexp was doing unnecessary capture, so fixed it up while I was at it.]
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add "--" after <commit-ish> or <tree-ish> argument to clearly mark it
as <commit-ish> or <tree-ish> and not pathspec, securing against refs
with the same names as files or directories in [live] repository.
Some wrapping to reduce line length as well.
[jc: with "oops, ls-tree does not want --" fix-up manually applied.]
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Blame fails for example on
block/ll_rw_blk.c at v2.6.19-rc3.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a kind of "next" view in the bottom part of navigation bar for
"commitdiff" view.
For commitdiff between two commits:
(from: _commit_)
For commitdiff for one single parent commit:
(parent: _commit_)
For commitdiff for one merge commit
(merge: _commit_ _commit_ ...)
For commitdiff for root (parentless) commit
(initial)
where _link_ denotes hyperlink. SHA1 is shortened to 7 characters on
display, everything is perhaps unnecessary esc_html on display.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is purely cosmetic. Having git_get_* between two parse_* subroutines
violated a good convention to group related things together.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This seems to be a pre-++ residual declaration and it wasn't good for
anything at all besides flooding the webserver errorlog with "omg, our in
the same scope!!" warnings.
[jc: the patch was bogus by defining the variable which defeated a
later test that checked it with "defined", which I fixed up.]
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Check if each of git base URLs in @git_base_url_list is true before
appending "/$project" to it to generate project URL.
This fixes the error that for default configuration for gitweb in
Makefile, with GITWEB_BASE_URL empty (and "++GITWEB_BASE_URL++" being
"" in gitweb.cgi), we had URL of "/$project" in the summary view.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use --no-commit-id option to git-diff-tree command in git_commit and
git_commitdiff to filter out commit ID output that git-diff-tree adds
when called with only one <tree-ish> (not only for --stdin). Remove
filtering commit IDs from git-diff-tree output.
This option is in git since at least v1.0.0, so make use of it.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On repo.or.cz, I want to support project 'forks', which are meant
for repositories which are spinoffs of a given project and share
its objects database through the alternates mechanism. But another
(and perhaps even greater) incentive for that is that those 'forked
projects' do not clutter the main project index but are completely
grouped inside of the project view.
A forked project is just like a normal project, but given project
$projectroot/$projname.git, the forked project resides in directory
$projectroot/$projname/$forkname.git. This is a somewhat arbitrary
naming rule, but I think that for now it's fine; if someone will need
something wildly different, let them submit a patch. The 'forked'
mode is by default off and can be turned on in runtime gitweb
configuration just like other features.
A project having forks is marked by a '+' (pointing to the list of
forks) in the project list (this could become some cutesy AJAXy
DHTML in the future), there is a forks section in the project
summary similar to the heads and tags sections, and of course
a forks view which looks the same as the root project list.
Forks can be recursive.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Print the rest of commit message (title, i.e. first line of commit
message, is printed separately) only if there is any.
In repository which uses signoffs this shouldn't happen, because
commit message should consist of at least title and signoff.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Filter out commit ID output that git-diff-tree adds when called with
only one <tree-ish> (not only for --stdin) in git_commit and
git_commitdiff.
This also works with older git versions, which doesn't have
--no-commit-id option to git-diff-tree.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace calls to git_print_simplified_log with its expansion,
i.e. with calling git_print_log with appropriate options.
Remove no longer used git_print_simplified_log subroutine.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the repository includes a README.html file, show it in the summary page.
The usual "this should be in the config file" argument does not apply here
since this can be larger and having such a big string in the config file
would be impractical.
I don't know if this is suitable upstream, but it's one of the repo.or.cz
custom modifications that I've thought could be interesting for others
as well.
Compared to the previous patch, this adds the '.html' extension to the
filename, so that it's clear it is, well, HTML.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you customized the site name, you probably do not want the " git"
appended so that the page title is not bastardized; I want repo.or.cz pages
titled "Public Git Hosting", not "Public Git Hosting git" (what's hosting
what?).
This slightly changes the $site_name semantics but only very
insignificantly.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the multiple search types actually usable by the user;
if you don't read the gitweb source, you don't even have an idea
that you can write things like that there.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This restores the redundant links removed earlier. It supersedes my patch
to stick slashes to tree entries.
Sorry about the previous version of the patch, an unrelated snapshot link
addition to tree entries slipped through (and it it didn't even compile);
I've dropped the idea of snapshot links in tree entries in the meantime
anyway.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the commit couldn't have been read, $/ wasn't restored to \n properly,
causing random havoc like git_get_ref_list() returning the ref names with
trailing \n.
Aside of potential confusion in the body of git_search(), no other $/
surprises are hopefully hidden in the code.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Adds '..' (up directory) link at the top of "tree" view listing,
if both $hash_base and $file_name are provided, and $file_name
is not empty string.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add link to "tree root" (root directory) also for not defined name,
for example for "tree" action without defined "file_name" which means
"tree root".
Add " / " at the end of path when $type eq "tree".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In git_tree, rename $base variable (which is passed as $basedir
argument to git_print_tree_entry) to $basedir. Do not esc_html
$basedir, as it is part of file_name ('f') argument in link and not
printed. Add '/' at the end only if $basedir is not empty (it is empty
for top directory) and doesn't end in '/' already.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Code should be aligned the same way, regardless of tab size.
Use tabs for indent, but spaces for align.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The project list page shows last change from the HEAD branch but
often people would want to view activity on any branch.
Unfortunately that is fairly expensive without the core-side
support. for-each-ref was invented exactly for that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently that was broken. Ideal fix would make the search form use
PATH_INFO too, but it's just one insignificant place so it's no big deal if
we don't for now... This at least makes it work.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski