kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Jon Loeliger	323b9db839	Fix Documentation typos surrounding the word 'handful'. Some instances replaced by "handful of", others use the word "few", a couple get a slight rewording. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Nanako Shiraishi	e1a5977407	Document git-ls-tree --full-tree Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	16 years ago
Junio C Hamano	1ceb95c804	Update my e-mail address The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	7ddea13af2	ls-tree documentation: enhance notes on subdirectory and pathspec behaviour When run in a working copy subdirectory, git-ls-tree will automagically add the prefix to the pathspec, which can result in an unexpected behavior when the tree object accessed is not the root tree object. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	59eb68aa2b	Update my e-mail address The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jonathan Nieder	b1889c36d8	Documentation: be consistent about "git-" versus "git " Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Christian Couder	9e1f0a85c6	documentation: move git(7) to git(1) As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Dan McGee	5162e69732	Documentation: rename gitlink macro to linkgit Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w\|-)?):(?P<target>\S?)(\[(?P<attrlist>.?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http\|https\|ftp\|file\|mailto\|callto\|image\|link)):(?P<target>\S?)(\[(?P<attrlist>.?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	a6080a0a44	War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Jakub Narebski	a5bbda8b7b	Add an option to git-ls-tree to display also the size of blob Add -l/--long option to git-ls-tree command, which displays object size of a blob entry. Object size is placed after object id (left-justified with minimum width of 7 characters). For non-blob entries `-' is used. Rationale: for non-blob entries size of an object has no much meaning, and is not very interesting. Moreover, in planned pack v4 tree objects would be constructed on demand, so tree size would need to be calculated. Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	c3f0baacad	Documentation: sync git.txt command list and manual page title Also reorders a handful entries to make each list sorted alphabetically. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	4269822012	Documentation: git-ls-tree (typofix) spotted by jdl. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Jonas Fonseca	fd7e9fb7ae	Document git-ls-tree --fullname Additionally, reformat synopsis and remove stub notice. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Eric Wong	cb85bfe5df	ls-tree: add --abbrev[=<n>] option Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Fredrik Kuivinen	7bd7f2804d	Remove trailing dot after short description Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Petr Baudis	7b9b4c452c	Update the git-ls-tree documentation This patch aims to freshen up a bit the git-ls-tree documentation. It hints that the list of paths are in fact patterns to be matched, explains the new -t, --name-only and --name-status options, corrects the original autorship information to refer to yours sincerely, corrects several grammar mistakes, etc. Since the documentation still deserves some significant work (at least proper description of the pattern matching), I also added the stub notice. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	d88156e943	Update documentation for C-style quoting. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	98438bd0e8	Remove the version tags from the manpages Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Sergey Vlasov	a7154e916c	[PATCH] Documentation: Update all files to use the new gitlink: macro The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>	20 years ago
Johannes Schindelin	2c6e477195	[PATCH] Assorted documentation patches [jc: Johannes spent time and effort to see how consistent our use of terminilogy is, and as a byproduct made these corrections not related to the terminology unification. I really appreciate it.] Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>	20 years ago
Junio C Hamano	6af1f0192f	[PATCH] Rewrite ls-tree to behave more like "/bin/ls -a" This is a complete rewrite of ls-tree to make it behave more like what "/bin/ls -a" does in the current working directory. Namely, the changes are: - Unlike the old ls-tree behaviour that used paths arguments to restrict output (not that it worked as intended---as pointed out in the mailing list discussion, it was quite incoherent), this rewrite uses paths arguments to specify what to show. - Without arguments, it implicitly uses the root level as its sole argument ("/bin/ls -a" behaves as if "." is given without argument). - Without -r (recursive) flag, it shows the named blob (either file or symlink), or the named tree and its immediate children. - With -r flag, it shows the named path, and recursively descends into it if it is a tree. - With -d flag, it shows the named path and does not show its children even if the path is a tree, nor descends into it recursively. This is still request-for-comments patch. There is no mailing list consensus that this proposed new behaviour is a good one. The patch to t/t3100-ls-tree-restrict.sh illustrates user-visible behaviour changes. Namely: * "git-ls-tree $tree path1 path0" lists path1 first and then path0. It used to use paths as an output restrictor and showed output in cache entry order (i.e. path0 first and then path1) regardless of the order of paths arguments. * "git-ls-tree $tree path2" lists path2 and its immediate children but having explicit paths argument does not imply recursive behaviour anymore, hence paths/baz is shown but not paths/baz/b. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>	20 years ago
Jason McMullan	6d3a5077dd	[PATCH] ls-tree matching multiple paths Enhance git-ls-tree to allow optional 'match paths' that restricts the output of git-ls-tree. This is useful to retrieve a single file's SHA1 out of a tree without creating an index. [JC: I added the test case] Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>	20 years ago
David Greaves	2cf565c53c	[PATCH 1/4] split core-git.txt and update Split the core-git.txt file Formatting fix to the diff-format.txt Signed-off-by: David Greaves <david@dgreaves.com>	20 years ago

23 Commits (3bec8ff99a7792cae67aaeb5892d832478d7f548)