This implements a protocol extension between fetch-pack and
upload-pack to allow stderr stream from upload-pack (primarily
used for the progress bar display) to be passed back.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If your repository have more roots than the remote repository
you ask an object for, the remote upload-pack keeps responding
"ack continue" until it fills up its received-have buffer
(currently 256 entries). Usually this is not a problem because
the requester stops traversing the ancestry chain from the commit
it gets "ack continue" for, but this mechanism does not work as
a roadblock when it traverses down the path to the root the
other side does not have.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently, fetched refs are output in the order the remote side
happened to send them. This changes the order to match the
order of refs that were given on the command line. To the
existing core callers (git-fetch and git-clone) this does not
make any difference, but for other Porcelain use, it would be
more intuitive.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This does two things.
* A new flag --reference can be used to name a local repository
that is to be used as an alternate. This is in response to
an inquiry by James Cloos in the message on the list
<m3r74ykue7.fsf@lugabout.cloos.reno.nv.us>.
* A new flag --use-separate-remote stops contaminating local
branch namespace by upstream branch names. The upstream
branch heads are copied in .git/refs/remotes/ instead of
.git/refs/heads/ and .git/remotes/origin file is set up to
reflect this as well. It requires to have fetch/pull update
to understand .git/refs/remotes by Eric Wong to further
update the repository cloned this way.
For the former change, git-fetch-pack is taught a new flag --all
to fetch from all the remote heads. Nobody uses the git-clone-pack
with this change, so we could deprecate the command, but removal
of the command will be left to a separate round.
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Fix -Wundef -Wold-style-definition warnings
- Make pll_free() static
[jc: original patch by Timo had another unrelated bits:
- Use setenv() instead of putenv()
I'm postponing that part for now.]
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It used to be that "git-unpack-objects" would give nice percentages, but
now that we don't unpack the initial clone pack any more, it doesn't. And
I'd love to do that nice percentage view in the pack objects downloader
too, but the thing doesn't even read the pack header, much less know how
much it's going to get, so I was lazy and didn't.
Instead, it at least prints out how much data it's gotten, and what the
packing speed is. Which makes the user realize that it's actually doing
something useful instead of sitting there silently (and if the recipient
knows how large the final result is, he can at least make a guess about
when it migt be done).
So with this patch, I get something like this on my DSL line:
[torvalds@g5 ~]$ time git clone master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 clone-test
Packing 188543 objects
48.398MB (154 kB/s)
where even the speed approximation seems to be roughtly correct (even
though my algorithm is a truly stupid one, and only really gives "speed in
the last half second or so").
Anyway, _something_ like this is definitely needed. It could certainly be
better (if it showed the same kind of thing that git-unpack-objects did,
that would be much nicer, but would require parsing the object stream as
it comes in). But this is big step forward, I think.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If git-fetch-pack was called with out any refspec, it would ask the server
for funny refs. That cannot work, since the funny refs are not marked
as OUR_REF by upload-pack, which just exits with an error.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While we are at it, give fully spelled --keep to fetch-pack.
Also give --quiet in addition to -q to fetch-pack as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Split out the functions that deal with the socketpair after
finishing git protocol handshake to receive the packed data into
a separate file, and use it in fetch-pack to keep/explode the
received pack data. We earlier had something like that on
clone-pack side once, but the list discussion resulted in the
decision that it makes sense to always keep the pack for
clone-pack, so unpacking option is not enabled on the clone-pack
side, but we later still could do so easily if we wanted to with
this change.
Signed-off-by: Junio C Hamano <junkio@cox.net>
These are whole-tree operations and there is not much point
making them operable from within a subdirectory, but it is easy
to do so, and using setup_git_directory() upfront helps git://
proxy specification picked up from the correct place.
Signed-off-by: Junio C Hamano <junkio@cox.net>
'git-fetch remote no-such-ref' succeeded without fetching any
ref from the remote. Detect such case and report an error.
Note that this makes 'git-fetch remote master master' to fail,
because the remote branch 'master' matches the first refspec,
and the second refspec is left unmatched, which is detected by
the error checking logic. This is somewhat unintuitive, but
giving the same refspec more than once to git-fetch is useless
in any case so it should not be much of a problem. I'd accept a
patch to change this if somebody cares enough, though.
Signed-off-by: Junio C Hamano <junkio@cox.net>
One caller of deref_tag() was not careful enough to make sure
what deref_tag() returned was not NULL (i.e. we found a tag
object that points at an object we do not have). Fix it, and
warn about refs that point at such an incomplete tag where
needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When git-fetch-pack gets the remote refs, it does not need to filter them
right away, but it can see which refs are common (taking advantage of the
patch which makes git-fetch-pack not use git-rev-list).
This means that we ask get_remote_heads() to return all remote refs,
including the funny refs, and filtering them with a separate function later.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The code used to call git-rev-list to enumerate the local revisions.
A disadvantage of that method was that git-rev-list, lacking a
control apart from the command line, would happily enumerate
ancestors of acknowledged common commits, which was just taking
unnecessary bandwidth.
Therefore, do not use git-rev-list on the fetching side, but rather
construct the list on the go. Send the revisions starting from the
local heads, ignoring the revisions known to be common.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch concludes the series, which makes
git-fetch-pack/git-upload-pack negotiate a potentially better set of
common revs. It should make a difference when fetching from a repository
with a few branches.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The code used to call git-rev-list to enumerate the local revisions. A
disadvantage of that method was that git-rev-list, lacking a control apart
from the command line, would happily enumerate ancestors of acknowledged
common commits, which was just taking unnecessary bandwidth.
Therefore, do not use git-rev-list on the fetching side, but rather
construct the list on the go. Send the revisions starting from the local
heads, ignoring the revisions known to be common.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also Johannes noticed we use parse_object to look up if we know that
object already -- we should just ask the in-core object registry with
lookup_object() for that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The previous round to optimize fetch-pack has a small bug that
feeds SHA1^ ("parent commit") before making sure SHA1 is
actually a commit (or a tag that eventually dereferences to a
commit). Also it did not help culling the known-to-be-common
parents if the common one was a merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was all good and well to check if all remote refs are complete (local
refs or descendants thereof), but we can just as easily use the same
information to avoid sending "want" lines just for the complete objects in
the case that not all remote refs are complete (or their names differ).
Also, git-fetch-pack does not have to ask for descendants of remote refs
which are complete (for now, git-rev-list is told to ignore only the first
parent). That change also eliminates a code path where a popen()ed handle
was not pclose()ed.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On top of optimization by Linus not to ask refs that already match, we
can walk our refs and not issue "want" for things that are known to be
reachable from them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On top of optimization by Linus not to ask refs that already match, we
can walk our refs and not issue "want" for things that are known to be
reachable from them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If everything is up-to-date locally, we don't need to even ask for a
pack-file from the remote, or try to unpack it.
This is especially important for tags - since the pack-file common commit
logic is based purely on the commit history, it will never be able to find
a common tag, and will thus always end up re-fetching them.
Especially notably, if the tag points to a non-commit (eg a tagged tree),
the pack-file would be unnecessarily big, just because it cannot any most
recent common point between commits for pruning.
Short-circuiting the case where we already have that reference means that
we avoid a lot of these in the common case.
NOTE! This only matches remote ref names against the same local name,
which works well for tags, but is not as generic as it could be. If we
ever need to, we could match against _any_ local ref (if we have it, we
have it), but this "match against same name" is simpler and more
efficient, and covers the common case.
Renaming of refs is common for branch heads, but since those are always
commits, the pack-file generation can optimize that case.
In some cases we might still end up fetching pack-files unnecessarily, but
this at least avoids the re-fetching of tags over and over if you use a
regular
git fetch --tags ...
which was the main reason behind the change.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On top of optimization by Linus not to ask refs that already match, we
can walk our refs and not issue "want" for things that are known to be
reachable from them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If everything is up-to-date locally, we don't need to even ask for a
pack-file from the remote, or try to unpack it.
This is especially important for tags - since the pack-file common commit
logic is based purely on the commit history, it will never be able to find
a common tag, and will thus always end up re-fetching them.
Especially notably, if the tag points to a non-commit (eg a tagged tree),
the pack-file would be unnecessarily big, just because it cannot any most
recent common point between commits for pruning.
Short-circuiting the case where we already have that reference means that
we avoid a lot of these in the common case.
NOTE! This only matches remote ref names against the same local name,
which works well for tags, but is not as generic as it could be. If we
ever need to, we could match against _any_ local ref (if we have it, we
have it), but this "match against same name" is simpler and more
efficient, and covers the common case.
Renaming of refs is common for branch heads, but since those are always
commits, the pack-file generation can optimize that case.
In some cases we might still end up fetching pack-files unnecessarily, but
this at least avoids the re-fetching of tags over and over if you use a
regular
git fetch --tags ...
which was the main reason behind the change.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows the remote side (most notably, upload-pack) to show
additional information without affecting the downloader. Peek-remote
does not ignore them -- this is to make it useful for Pasky's
automatic tag following.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows the remote side (most notably, upload-pack) to show
additional information without affecting the downloader. Peek-remote
does not ignore them -- this is to make it useful for Pasky's
automatic tag following.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a beginning of resurrecting the multi-head pulling support
for git-fetch-pack command. The git-fetch-script wrapper still
only knows about fetching a single head, without renaming, so it is
not very useful unless you directly call git-fetch-pack itself yet.
It also fixes a longstanding obsolete description of how the command
discovers the list of local commits.
This adds documentation for 'smarter pull' family of commands.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Oh, well.. FC4 has UTF-8 as the default environment, and I applaud
that, but then it sometimes results in these characters that aren't
actually visible as a problem.
"git_path()" returns a static pathname pointer into the git directory
using a printf-like format specifier.
"head_ref()" works like "for_each_ref()", except for just the HEAD.
It returns the result SHA1 on stdout, so you can do
remote=$(git-fetch-pack host:dir branchname)
and it will unpack the objects and "remote" will be the SHA1 name of the
branch on the other side. You can then save that off, or merge it, or
whatever.
It's meant to be used by "git fetch" for the local and ssh case.
It doesn't actually do the fetching now, but it does discover the common
commit point.
Junio C Hamano