The code to skip "UTF" and "UTF-" prefix, when computing an advice
message, did not work correctly when the prefix was "UTF", which
has been fixed.
* rs/convert-fix-utf-without-dash:
convert: fix handling of dashless UTF prefix in validate_encoding()
Miscellaneous code clean-ups.
* ah/cleanups:
git_mkstemps_mode(): replace magic numbers with computed value
wrapper: use a loop instead of repetitive statements
diffcore-break: use a goto instead of a redundant if statement
commit-graph: remove a duplicate assignment
The rename detection logic sorts a list of rename source candidates
by similarity to pick the best candidate, which means that a tie
between sources with the same similarity is broken by the original
location in the original candidate list (which is sorted by path).
Force the sorting by similarity done with a stable sort, which is
not promised by system supplied qsort(3), to ensure consistent
results across platforms.
* js/diff-rename-force-stable-sort:
diffcore_rename(): use a stable sort
Move git_sort(), a stable sort, into into libgit.a
Correct code that tried to reference all entries in a sparse array
of pointers by mistake.
* as/shallow-slab-use-fix:
shallow.c: don't free unallocated slabs
Inspired by the thoroughly stale https://github.com/git/git/pull/159,
this patch fixes a couple of typos, rewraps and clarifies some comments.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the tests for GIT_SKIP_TESTS do not cover the situation where
we skip an entire test suite. The tests also do not cover the situation
where we have GIT_SKIP_TESTS defined but the test suite does not match.
Add two test cases so we cover this blindspot.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building the packfile to be sent, send_pack() is given a list of
remote refs to be used as exclusions. For each ref, it first checks if
the ref exists locally, and if it does, passes it with a "^" prefix to
pack-objects. However, in a partial clone, the check may trigger a lazy
fetch.
The additional commit ancestry information obtained during such fetches
may show that certain objects that would have been sent are already
known to the server, resulting in a smaller pack being sent. But this is
at the cost of fetching from many possibly unrelated refs, and the lazy
fetches do not help at all in the typical case where the client is
up-to-date with the upstream of the branch being pushed.
Ensure that these lazy fetches do not occur.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 6bd26f58ea (t4014: use test_line_count() where possible, 2019-08-27),
we converted many test cases to take advantage of the test_line_count()
function. In one conversion, we inverted the expected and actual value
as tested by test_line_count(). Although functionally correct, if
format-patch ever produced incorrect output, the debugging output would
be a bunch of hashes which would be difficult to debug.
Invert the expected and actual values provided to test_line_count() so
that if format-patch produces incorrect output, the debugging output
will be a list of human-readable files instead.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ef283b3699 ("apply: make parse_git_diff_header public", 2019-07-11)
the 'parse_git_diff_header' function was made public and useable by
callers outside of apply.c.
However it was missed that its (then) only caller, 'find_header' did
some error handling, and completing 'struct patch' appropriately.
range-diff then started using this function, and tried to handle this
appropriately itself, but fell short in some cases. This in turn
would lead to range-diff segfaulting when there are mode-only changes
in a range.
Move the error handling and completing of the struct into the
'parse_git_diff_header' function, so other callers can take advantage
of it. This fixes the segfault in 'git range-diff'.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous step added annotations with "the_repository" to various
functions in the push codepath in the transport layer, but they all
can take arbitrary repository pointer, and may be working on a
repository that is not the_repository. Fix them.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Empty arguments passed on the command line can be represented by
a '', however sq_quote_buf_pretty was incorrectly dropping these
arguments altogether. Fix this problem by ensuring that such
arguments are emitted as '' instead.
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 8e4ec337 ("merge-recursive: fix the diff3 common ancestor
label for virtual commits", 2019-10-01), which was a fix to commit
743474cbfa ("merge-recursive: provide a better label for diff3
common ancestor", 2019-08-17), the label for the common ancestor was
changed from always being
"merged common ancestors"
to instead be based on the number of merge bases and whether the merge
base was a real commit or a virtual one:
>=2: "merged common ancestors"
1, via merge_recursive_generic: "constructed merge base"
1, otherwise: <abbreviated commit hash>
0: "<empty tree>"
The handling for "constructed merge base" worked by allowing
opt->ancestor to be set in merge_recursive_generic(), so we paid
attention to the setting of that variable in merge_recursive_internal().
Now, for the outer merge, the code flow was simply the following:
ancestor_name = "merged merge bases"
loop over merge_bases: merge_recursive_internal()
The first merge base not needing recursion would determine its own
ancestor_name however necessary and thus run
ancestor_name = $SOMETHING
empty loop over merge_bases...
opt->ancestor = ancestor_name
merge_trees_internal()
Now, the next set of merge_bases that would need to be merged after this
particular merge had completed would note that opt->ancestor has been
set to something (to a local ancestor_name variable that has since been
popped off the stack), and thus it would run:
... else if (opt->ancestor) {
ancestor_name = opt->ancestor; /* OOPS! */
loop over merge_bases: merge_recursive_internal()
opt->ancestor = ancestor_name
merge_trees_internal()
This resulted in garbage strings being printed for the virtual merge
bases, which was visible in git.git by just merging commit b744c3af07
into commit 6d8cb22a4f. There are two ways to fix this: set
opt->ancestor to NULL after using it to avoid re-use, or add a
!opt->priv->call_depth check to the if block for using a pre-defined
opt->ancestor. Apply both fixes.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dev support.
* dl/honor-cflags-in-hdr-check:
ci: run `hdr-check` as part of the `Static Analysis` job
Makefile: emulate compile in $(HCO) target better
pack-bitmap.h: remove magic number
promisor-remote.h: include missing header
apply.h: include missing header
A bug in merge-recursive code that triggers when a branch with a
symbolic link is merged with a branch that replaces it with a
directory has been fixed.
* jt/merge-recursive-symlink-is-not-a-dir-in-way:
merge-recursive: symlink's descendants not in way
The hg-to-git script (in contrib/) has been updated to work with
Python 3.
* hb/hg-to-git-py3:
hg-to-git: make it compatible with both python3 and python2
The code to parse and use the commit-graph file has been made more
robust against corrupted input.
* tb/commit-graph-harden:
commit-graph.c: handle corrupt/missing trees
commit-graph.c: handle commit parsing errors
t/t5318: introduce failing 'git commit-graph write' tests
The cache-tree code has been taught to be less aggressive in
attempting to see if a tree object it computed already exists in
the repository.
* jt/cache-tree-avoid-lazy-fetch-during-merge:
cache-tree: do not lazy-fetch tentative tree
Coccinelle checks are done on more source files than before now.
* dl/cocci-everywhere:
Makefile: run coccicheck on more source files
Makefile: strip leading ./ in $(FIND_SOURCE_FILES)
Makefile: define THIRD_PARTY_SOURCES
Makefile: strip leading ./ in $(LIB_H)
The code used in following tags in "git fetch" has been optimized.
* ms/fetch-follow-tag-optim:
fetch: use oidset to keep the want OIDs for faster lookup
The object name parser for "Nth parent" syntax has been made more
robust against integer overflows.
* rs/nth-parent-parse:
sha1-name: check for overflow of N in "foo^N" and "foo~N"
rev-parse: demonstrate overflow of N for "foo^N" and "foo~N"
The object traversal machinery has been optimized not to load tree
objects when we are only interested in commit history.
* jk/list-objects-optim-wo-trees:
list-objects: don't queue root trees unless revs->tree_objects is set
The "upload-pack" (the counterpart of "git fetch") needs to disable
commit-graph when responding to a shallow clone/fetch request, but
the way this was done made Git panic, which has been corrected.
* jk/disable-commit-graph-during-upload-pack:
upload-pack: disable commit graph more gently for shallow traversal
commit-graph: bump DIE_ON_LOAD check to actual load-time
The command line completion for "git archive" and "git rebase" are
now made less prone to go out of sync with the binary.
* dl/complete-rebase-and-archive:
completion: teach archive to use __gitcomp_builtin
completion: teach rebase to use __gitcomp_builtin
A pair of small fixups to "git commit-graph" have been applied.
* jk/commit-graph-cleanup:
commit-graph: turn off save_commit_buffer
commit-graph: don't show progress percentages while expanding reachable commits
"git log --decorate-refs-exclude=<pattern>" was incorrectly
overruled when the "--simplify-by-decoration" option is used, which
has been corrected.
* rs/simplify-by-deco-with-deco-refs-exclude:
log-tree: call load_ref_decorations() in get_name_decoration()
log: test --decorate-refs-exclude with --simplify-by-decoration
The name of the blob object that stores the filter specification
for sparse cloning/fetching was interpreted in a wrong place in the
code, causing Git to abort.
* jk/partial-clone-sparse-blob:
list-objects-filter: use empty string instead of NULL for sparse "base"
list-objects-filter: give a more specific error sparse parsing error
list-objects-filter: delay parsing of sparse oid
t5616: test cloning/fetching with sparse:oid=<oid> filter
"git stash" learned to write refreshed index back to disk.
* tg/stash-refresh-index:
stash: make sure to write refreshed cache
merge: use refresh_and_write_cache
factor out refresh_and_write_cache function
Junio C Hamano