Update the diff-raw format as Linus and I discussed, except that
it does not use sequence of underscore '_' letters to express
nonexistence. All '0' mode is used for that purpose instead.
The new diff-raw format can express rename/copy, and the earlier
restriction that -M and -C _must_ be used with the patch format
output is no longer necessary. The patch makes -M and -C flags
independent of -p flag, so you need to say git-whatchanged -M -p
to get the diff/patch format.
Updated are both documentations and tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This does not actually supress the extra headers when pickaxe is
used, but prepares enough support for diff-tree to implement it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch extends diff-cache and diff-files to report the
unmodified files to diff-core as well when -C (copy detection)
is in effect, so that the unmodified files can also be used as
the source candidates. The existing test t4003 has been
extended to cover this case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This steals the "pickaxe" feature from JIT and make it available
to the bare Plumbing layer. From the command line, the user
gives a string he is intersted in.
Using the diff-core infrastructure previously introduced, it
filters the differences to limit the output only to the diffs
between <src> and <dst> where the string appears only in one but
not in the other. For example:
$ ./git-rev-list HEAD | ./git-diff-tree -Sdiff-tree-helper --stdin -M
would show the diffs that touch the string "diff-tree-helper".
In real software-archaeologist application, you would typically
look for a few to several lines of code and see where that code
came from.
The "pickaxe" module runs after "rename/copy detection" module,
so it even crosses the file rename boundary, as the above
example demonstrates.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This introduces the diff-core, the layer between the diff-tree
family and the external diff interface engine. The calls to the
interface diff-tree family uses (diff_change and diff_addremove)
have not changed and will not change. The purpose of the
diff-core layer is to provide an infrastructure to transform the
set of differences sent from the applications, before sending
them to the external diff interface.
The recently introduced rename detection code has been rewritten
to use the diff-core facility. When applications send in
separate creates and deletes, matching ones are transformed into
a single rename-and-edit diff, and sent out to the external diff
interface as such.
This patch also enhances the rename detection code further to be
able to detect copies. Currently this happens only as long as
copy sources appear as part of the modified files, but there
already is enough provision for callers to report unmodified
files to diff-core, so that they can be also used as copy source
candidates. Extending the callers this way will be done in a
separate patch.
Please see and marvel at how well this works by trying out the
newly added t/t4003-diff-rename-1.sh test script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix various things that sparse complains about:
- use NULL instead of 0
- make sure we declare everything properly, or mark it static
- use proper function declarations ("fn(void)" instead of "fn()")
Sparse is always right.
The same check we added earlier to update-cache to catch ENOTDIR
turns out to be missing from diff-files. This causes a
difference not being reported when you have DF/DF (a file in a
subdirectory) in the cache and DF is a file on the filesystem.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This cleans up the way calls are made into the diff core from diff-tree
family and diff-helper. Earlier, these programs had "if
(generating_patch)" sprinkled all over the place, but those ugliness are
gone and handled uniformly from the diff core, even when not generating
patch format.
This also allowed diff-cache and diff-files to acquire -R
(reverse) option to generate diff in reverse. Users of
diff-tree can swap two trees easily so I did not add -R there.
[ Linus' note: I'll add -R to "diff-tree" too, since a "commit
diff" doesn't have another tree to switch around: the other
tree is always the parent(s) of the commit ]
Also -M<digits-as-mantissa> suggestion made by Linus has been
implemented.
Documentation updates are also included.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fixes all in-code names that leaved during "big name change".
Signed-off-by: Alexey Nezhdanov <snake@penza-gsm.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This rips out the rename detection engine from diff-helper and moves it
to the diff core, and updates the internal calling convention used by
diff-tree family into the diff core. In order to give the same option
name to diff-tree family as well as to diff-helper, I've changed the
earlier diff-helper '-r' option to '-M' (stands for Move; sorry but the
natural abbreviation 'r' for 'rename' is already taken for 'recursive').
Although I did a fair amount of test with the git-diff-tree with
existing rename commits in the core GIT repository, this should still be
considered beta (preview) release. This patch depends on the diff-delta
infrastructure just committed.
This implements almost everything I wanted to see in this series of
patch, except a few minor cleanups in the calling convention into diff
core, but that will be a separate cleanup patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Raw hashes should be unsigned char.
- String functions want signed char.
- Hash and compress functions want unsigned char.
Signed-off By: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Again I am not sure why this was missed during the last round,
but git-diff-files mishandles symlinks on the filesystem. This
patch fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
And I'm not sure why did I miss this patch before. Sorry.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Fix update-cache to compare the blob of a symlink against the link-target
and not the file it points to. Also ignore all permissions applied to
links.
Thanks to Greg for recognizing this while he added our list of symlinks
back to the udev repository.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This also regularizes the make. The source files themselves don't get
the "git-" prefix, because that's just inconvenient. So instead we just
make the rule that "git-xxxx" depends on "xxxx.c", and do that for
all the core programs (ie the old "git-mktag.c" got renamed to just
"mktag.c" to match everything else).
And "show-diff" got renamed to "git-diff-files" while at it, since
that's what it really should be to match the other git-diff-xxx cases.
With the recent "no-patch-by-default" change, the -s flag to the
show-diff command (and silent variable in the show-diff.c) became
meaningless. This deprecates it.
Cogito uses "show-diff -s" for the purpose of "I do not want the patch
text. I just want to know if something has potentially changed, in
which case I know you will have some output. I'll run update-cache
--refresh if you say something", so we cannot barf on seeing -s on our
command line yet.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This uses the reworked diff interface to generate patches directly out
of show-diff when -p is specified.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This reworks the diff-tree-helper and show-diff to further make external
diff command interface simpler.
These commands now honor GIT_EXTERNAL_DIFF environment variable which
can point at an arbitrary program that takes 7 parameters:
name file1 file1-sha1 file1-mode file2 file2-sha1 file2-mode
The parameters for an external diff command are as follows:
name this invocation of the command is to emit diff
for the named cache/tree entry.
file1 pathname that holds the contents of the first
file. This can be a file inside the working
tree, or a temporary file created from the blob
object, or /dev/null. The command should not
attempt to unlink it -- the temporary is
unlinked by the caller.
file1-sha1 sha1 hash if file1 is a blob object, or "."
otherwise.
file1-mode mode bits for file1, or "." for a deleted file.
If GIT_EXTERNAL_DIFF environment variable is not set, the
default is to invoke diff with the set of parameters old
show-diff used to use. This built-in implementation honors the
GIT_DIFF_CMD and GIT_DIFF_OPTS environment variables as before.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With this patch, the non-core'ish part of show-diff command that
invokes an external "diff" comand to obtain patches is split
into a separate file. The next patch will introduce a new
command, diff-tree-helper, which uses this common diff interface
to format diff-tree and diff-cache output into a patch form.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Patch 1/6 in the series has already cleaned the interface to
call sq_expand(), but the comment before that function still
carries the stale interface warning. Remove it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds -R option to obtain reverse diff.
It may be useful in the merge workflow. After the base of the working
directory is merged and commited, in the working directory:
$ read-tree <tree-id-of-merged-tree>
$ show-diff -R
to re-validate if upstream changes make sense, and/or revert or
conflict with local changes you have in the working files.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This makes the diff output formatting options customizable via the
environment variables. The default is still the Linux kernel style.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adjusts the default output format of show-diff to match
the Linux kernel style, recommended in Documentation/SubmittingPatches.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch removes the custom diff generation code from the
show_diff_empty() function. Instead, just use show_differences().
This reduces the code size; but more importantly, it is needed for
the later patch to give diff options.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes show-diff to detect unreadable blob and warn
instead of going ahead and crashing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes sq_expand() and show_differences() not to use and
hold onto its privately allocated buffer, which was a misguided
attempt to reduce calls to malloc but made later changes harder.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The patch to introduce shell safety to show-diff has an
off-by-one error. Here is an fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is my bad. I added #include <ctype.h> to the file,
which I ended up not using and failed to remove it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When run on unmerged dircache, show-diff compares the working
file with each non-empty stage for that path. Two out of three
times, this is not very helpful. This patch makes it report the
unmergedness only once per each path and avoids running the
actual diff.
Upper layer SCMs like Cogito are expected to find out mode/SHA1
for each stage by using "show-files --stage" and run the diff
itself. This would result in more sensible diffs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes some stylistic problems introduced by my previous set
of patches. I'll be sending my last patch to show-diff next,
which depends on this cleanup.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The show-diff command uses a variable "new" but it is always
used to point at the original data recorded in the dircache
before the user started editing in the working file. Rename it
to "old" to avoid confusion.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The command line for running "diff" command is built without
taking shell metacharacters into account. A malicious dircache
entry "foo 2>bar" (yes, a filename with space) would result in
creating a file called "bar" with the error message "diff: foo:
No such file or directory" in it.
This is not just a user screwing over himself. Such a dircache
can be created as a result of a merge with tree from others.
Here is a fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds the -z option to the show-diff command,
primarily for use by scripts. The information emitted is
similar to that of -q option, but in a more machine readable
form. Records are terminated with NUL instead of LF, so that
the scripts can deal with pathnames with embedded newlines.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
SCMs have ways to say "I want diff only this particular file",
or "I want diff files under this directory". This patch teaches
show-diff to do something similar. Without command line
arguments, it still examines everything in the dircache as
before.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds the '-q' option for show-diff.c to squelch complaints for
missing files.
It is handy if you want to run it in the merge temporary directory after
running merge-trees with its minimum checkout mode, which is the
default, because you would not find any files other than the ones that
needs human validation after the merge there.
It also fixes the argument parsing bug Paul Mackerras noticed in
<16991.42305.118284.139777@cargo.ozlabs.ibm.com> but slightly
differently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This allows using a git tree over NFS with different byte order, and
makes it possible to just copy a fully populated repository and have
the end result immediately usable (needing just a refresh to update
the stat information).
My convention is that contrary to files trimmed to zero size,
deleted files always go to /dev/null. This patch turns show-diff
to abide this.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
This patch adds a -s flag for show-diff, which will surpress the
actual diffing. This is useful for my scripts when they just want
to see what needs to be updated in the cache.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
The ideas is that using the show-diff to generate the
patch including deleted and new file (in the next patch).
So we don't have to do the temp new file diff dance on the
script.
The cache index now contain enough information to generate
the whole patch. So the GIT SCM don't need separate command
for check out file to edit or delete. Just do the edit and
remove and GIT will generate the correct patch.
It still require tell GIT to add new files.
The tool interface sucks (especially "committing" information, which is just
me doing everything by hand from the command line), but I think this is in
theory actually a viable way of describing the world. So copyright it.
Junio C Hamano