Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After a failed "git am" attempt:
git apply --reject --verbose .dotest/patch
applies hunks that are applicable and leaves *.rej files the
rejected hunks, and it reports what it is doing. With --index,
files with a rejected hunk do not get their index entries
updated at all, so "git diff" will show the hunks that
successfully got applied.
Without --verbose to remind the user that the patch updated some
other paths cleanly, it is very easy to lose track of the status
of the working tree, so --reject implies --verbose.
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-apply.c defines a local variable 'c' which is used only
once and then later gets shadowed by another instance of 'c'.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-apply.c and builtin-push.c uses a local variable called 'error'
which shadows the error() function.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new flag "--reject", hunks that do not apply are sent to
the standard output, and the usable hunks are applied. The command
itself exits with non-zero status when this happens, so that the
user or wrapper can take notice and sort the remaining mess out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Parsing of a binary hunk did not consume the terminating blank
line. When applying in reverse, it did not use the second,
reverse binary hunk.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace sha1 comparisons to null_sha1 with a global inline (which previously an
unused static inline in builtin-apply.c)
[jc: with a fix from Jonas Fonseca.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the implementation of "git-apply --binary", and
implements reverse application of binary patches (when git-diff
is converted to emit reversible binary patches).
Earlier, the types of encoding (either deflated literal or
deflated delta) were stored in is_binary field in struct patch,
which meant that we cannot store more than one fragment that
differ in the encoding for a patch. This moves the information
to a field in struct fragment that is otherwise unused for
binary patches, and makes it possible to hang two (or more, but
two is enough) hunks for a binary patch.
The original "binary patch" output from git-diff is internally
parsed into an "is_binary" patch with one fragment. Upcoming
reversible binary patch output will have two fragments, the
first one being the forward patch and the second one the reverse
patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Having is_reverse in each patch did not make sense. This will hopefully
simplify the work needed to introduce reversible binary diff format.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most of the callers except the one in refs.c use the function to
update the index file. Among the index writers, everybody
except write-tree dies if they cannot open it for writing.
This gives the function an extra argument, to tell it to die
when it cannot create a new file as the lockfile.
The only caller that does not have to die is write-tree, because
updating the index for the cache-tree part is optional and not
being able to do so does not affect the correctness. I think we
do not have to be so careful and make the failure into die() the
same way as other callers, but that would be a different patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The internal representation of the result is counted string
(i.e. char *buf and ulong size), which is fine for writing out
to regular file, but throwing the buf at symlink(2) was a
no-no.
Reported by Willy Tarreau.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the calling convention of built-in commands and
passes the "prefix" (i.e. pathname of $PWD relative to the
project root level) down to them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On cygwin, when you try to create a symlink over a directory, you do
not get EEXIST, but EACCES.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A type-change diff is always split into a patch to delete old,
immediately followed by a patch to create new. check_patch()
routine noticed that the path to be created already exists in
the working tree and/or in the index when looking at the
creation patch and mistakenly thought it to be an error.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reworks write_out_result() loop so we first remove the paths that
are to go away and then create them after finishing all the removal.
This is necessary when a patch creates a file "foo" and removes a file
"foo/bar".
Signed-off-by: Junio C Hamano <junkio@cox.net>
When creating a new file where a directory used to be (or the user had
an empty directory) the code did not check the result from lstat() closely
enough, and mistakenly thought the path already existed in the working tree.
This does not fix the problem where you have a patch that creates a file
at "foo" and removes a file at "foo/bar" (which presumably is the last file
in "foo/" directory in the original). For that, we would need to restructure
write_out_results() loop.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This doesn't make the code uglier or harder to read, yet it makes the
code more portable. This also simplifies checking for other potential
incompatibilities. "gcc -std=c89 -pedantic" can flag many incompatible
constructs as warnings, but C99 comments will cause it to emit an error.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It does not make much sense to build git whose behaviour is
different depending on the brokenness of diff implementation of
the platform because the brokenness of the patch that is applied
with the tool depends on brokenness of the diff the person who
generates the patch uses. So we do not use NO_ACCURATE_DIFF
anymore, but help people to apply patches that do not record
incomplete lines correctly with a runtime flag.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
ANSI C99 doesn't allow void-pointer arithmetic. This patch fixes this in
various ways. Usually the strategy that required the least changes was used.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The framework to create lockfiles that are removed at exit is
first used to reliably write the index file, but it is
applicable to other things, so stop calling it "cache_file".
This also rewords a few remaining error message that called the
index file "cache file".
Signed-off-by: Junio C Hamano <junkio@cox.net>
The --cached mode does not deal with the working tree, so we
should not check it with lstat. An earlier code omitted the
call to lstat but forgot to omit the check for the errno.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new flag "--cached" takes the cached data, applies the patch
and stores the result in the index, without using the working
tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When multiple patches are passed to git-apply, it will attempt
to open multiple file descriptors to an index, which means
multiple entries will be in the circular cache_file_list.
This change makes git-apply only open the index once and
write the index at exit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the user interface and generated diff data format.
* "diff --binary" is used to signal that we want an e-mailable
binary patch. It implies --full-index and -p.
* "apply --allow-binary-replacement" acquired a short synonym
"apply --binary".
* After the "GIT binary patch\n" header line there is a token
to record which binary patch mechanism was used, so that we
can extend it later. Currently there are two mechanisms
defined: "literal" and "delta". The former records the
deflated postimage and the latter records the deflated delta
from the preimage to postimage.
For purely implementation convenience, I added the deflated
length after these "literal/delta" tokens (otherwise the
decoding side needs to guess and reallocate the buffer while
inflating). Improvement patches are very welcomed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds "binary patch" to the diff output and teaches apply
what to do with them.
On the diff generation side, traditionally, we said "Binary
files differ\n" without giving anything other than the preimage
and postimage object name on the index line. This was good
enough for applying a patch generated from your own repository
(very useful while rebasing), because the postimage would be
available in such a case. However, this was not useful when the
recipient of such a patch via e-mail were to apply it, even if
the preimage was available.
This patch allows the diff to generate "binary" patch when
operating under --full-index option. The binary patch follows
the usual extended git diff headers, and looks like this:
"GIT binary patch\n"
<length byte><data>"\n"
...
"\n"
Each line is prefixed with a "length-byte", whose value is upper
or lowercase alphabet that encodes number of bytes that the data
on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ...,
'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of
5-byte sequence, each of which encodes up to 4 bytes in base85
encoding. Because 52 / 4 * 5 = 65 and we have the length byte,
an output line is capped to 66 characters. The payload is the
same diff-delta as we use in the packfiles.
On the consumption side, git-apply now can decode and apply the
binary patch when --allow-binary-replacement is given, the diff
was generated with --full-index, and the receiving repository
has the preimage blob, which is the same condition as it always
required when accepting an "Binary files differ\n" patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates git-apply to maintain cache-tree information. With
this and the previous write-tree patch, repeated "apply --index"
followed by "write-tree" on a huge tree will hopefully become
faster.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Ok this really should be the good version. The option
handling has been reworked to be automation safe.
Currently to import the -mm tree I have to work around
git-apply by using patch. Because some of Andrews
patches in quilt will only apply with fuzz.
I started out implementing a --fuzz option and then I realized
fuzz is not a very safe concept for an automated system. What
you really want is a minimum number of context lines that must
match. This allows policy to be set without knowing how many
lines of context a patch actually provides. By default
the policy remains to match all provided lines of context.
Allowng git-apply to match a restricted set of context makes
it much easier to import the -mm tree into git. I am still only
processing 1.5 to 1.6 patches a second for the 692 patches in
2.6.17-rc1-mm2 is still painful but it does help.
If I just loop through all of Andrews patches in order
and run git-apply --index -C1 I process the entire patchset
in 1m53s or about 6 patches per second. So running
git-mailinfo, git-write-tree, git-commit-tree, and
git-update-ref everytime has a measurable impact,
and shows things can be speeded up even more.
All of these timings were taking on my poor 700Mhz Athlon
with 512MB of ram. So people with fast machiens should
see much better performance.
When a match is found after the number of context are reduced a
warning is generated. Since this is a rare event and possibly
dangerous this seems to make sense. Unless you are patching
a single file the error message is a little bit terse at
the moment, but it should be easy to go back and fix.
I have also updated the documentation for git-apply to reflect
the new -C option that sets the minimum number of context
lines that must match.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces occurences of "blob", "commit", "tag", and "tree",
where they're really used as type specifiers, which we already
have defined global constants for.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was triggered by me testing the "@@" numbering shorthand by GNU
patch, which not only showed that git-apply thought it meant the number
was duplicated (when it means that the second number is 1), but my tests
showed than when git-apply mis-understood the number, it would then not
raise an alarm about it if the patch ended early.
Now, this doesn't actually _matter_, since with a three-line context, the
only case that "x,1" will be shorthanded to "x" is when x itself is 1 (in
which case git-apply got it right), but the fact that git-apply would also
silently accept truncated patches was a missed opportunity for additional
sanity-checking.
So make git-apply refuse to look at a patch fragment that ends early.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sometimes it is convient for a Porcelain to be able to checkout all
unmerged files in all stages so that an external merge tool can be
executed by the Porcelain or the end-user. Using git-unpack-file
on each stage individually incurs a rather high penalty due to the
need to fork for each file version obtained. git-checkout-index -a
--stage=all will now do the same thing, but faster.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We were missing the --whitespace option in the usage string for
git-apply and git-am, so this commit adds them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the default --whitespace policy to nowarn when we
are only getting --stat, --summary etc. IOW when not applying
the patch. When applying the patch, the default is warn (spit
out warning message but apply the patch).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the default --whitespace policy to nowarn when we
are only getting --stat, --summary etc. IOW when not applying
the patch. When applying the patch, the default is warn (spit
out warning message but apply the patch).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce