This particular message is talking about a specific option in the
configuration file named "gui.$name". This option is not localized
so we cannot localize the "gui." that denotes the section the option
$name is found within. Currently there are no plans to localize the
configuration options for git-gui, but if that were to change in the
future then it would be necessary to localize not only the "gui."
section prefix but also the $name (fontui and fontdiff).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We don't actually need to create the lib/msgs symlink back to our
po directory in the source tree. git-gui.sh is smart enough to
figure out this is where the msg files are and will load them from
the po directory if invoked as git-gui.sh.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
with contributions from LI Yang, WANG Cong, ZHANG Le, and rae l
from the zh-kernel.org mailing list.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jes: includes patches from Michele Ballabio]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jes: Also includes work from Junio Hamano]
Signed-off-by: しらいしななこ <nanako3@bluebottle.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This way, it should be easier for new translators to actually find out
about the glossary.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Usually, generated files are not part of the tracked content in
a project. However, translators may lack the tools to generate
git-gui.pot. Besides, it is possible that a contributor does
not even check out the repository, but gets this file via gitweb.
Pointed out by Junio.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This short note is to help a translation contributor to help us
localizing git-gui message files by covering the basics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jes: with fixes by the i18n team.]
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The procedure [mc ...] will translate the strings through msgcat.
Strings must be enclosed in quotes, not in braces, because otherwise
xgettext cannot extract them properly, although on the Tcl side both
delimiters would work fine.
[jes: I merged the later patches to that end.]
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tcl's msgcat library and corresponding mc procedure can locate a
translated string for any user message, provided that it is first
given a directory where the *.msg files are located containing the
translations.
During installation we will place the translations in lib/msgs/,
so we need to inform msgcat of this location once we determine it
during startup. Our source code tree however will store all of
the translations within the po/ directory, so we need to special
case this variant.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To support a localized version of git-gui we need to locate the
library directory early so we can initialize Tcl's msgcat package
to load translated messages from. This needs to occur before we
declare our git-version proc so that errors related to locating
git or assessing its version can be reported to the end-user in
their preferred language. However we have to keep the library
loading until after git-version has been declared, otherwise we
will fail to start git-gui if we are using a fake tclIndex that
was generated by our Makefile.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
David Kastrup pointed out that the following sequence was not
working as we had intended:
$ cd lib
$ git gui blame console.tcl
fatal: cannot stat path lib/console.tcl: No such file or directory
The problem here was we disabled the chdir to the root of the
working tree when we are running with a "bare allowed" feature
such as blame or browser, but we still kept the prefix we found via
`git rev-parse --show-prefix`. This caused us to try and look for
the file "console.tcl" within the subdirectory but also include
the subdirectory's own path from the root of the working tree.
This is unlikely to succeed, unless the user just happened to have
a "lib/lib/console.tcl" file in the repository, in which case we
would produce the wrong result.
In the case of a bare repository we shouldn't get back a value from
`rev-parse --show-prefix`, so really $_prefix should only be set
to the non-empty string if we are in a working tree and we are in a
subdirectory of that working tree. If this is true we really want
to always be at the top level of the working tree, as all paths are
accessed as though they were relative to the top of the working tree.
Converting $_prefix to a ../ sequence is a fairly simple approach
to moving up the requisite levels.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-apply does not accept a patch that was generated as a three-way
combined diff format such as we see during merge conflicts. If we
get such a diff in our diff viewer and try to send it to git-apply
it just errors out and the user is left confused wondering why they
cannot stage that hunk.
Instead of feeding a known to be unacceptable hunk to git-apply we
now just disable the stage/unstage context menu option if the hunk
came from a three way diff. The user may still be confused about
why they cannot work with a combined diff, but at least they are
only confused as to why git-gui is not offering them the action.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The current popup_diff_menu procedure is somewhat messy as it has a
few duplications of the same logic in each of the different legs of
the routine. We can simplify these by setting a few state variables
in the different legs.
No functional change, just a cleanup to make it easier to implement
future functional changes within this block.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the tclsh command was not available to us at the time we were
"built" our lib/tclIndex just lists all of our library files and
we source all of them at once during startup, rather than trying
to lazily load only the procedures we need. This is a problem as
some of our library code now depends upon the git-version proc,
and that proc is not defined until after the library was fully
loaded.
I'm moving the library loading until after we have determined the
version of git we are talking to, as this ensures that the required
git-reversion procedure is defined before any library code can be
loaded. Since error_popup is defined in the library we instead use
tk_messageBox directly for errors found during the version detection.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In a13ee29b97 I totally broke the
"Stage Hunk For Commit" feature by making this menu item always
appear in a disabled state, so it was never invokable. A "teaser
feature", just sitting there taunting the poor user who has become
used to having it available.
The issue caused by a13ee was I added a test to look at the data
in $file_states, but I didn't do that test correctly as it was
always looking at a procedure local $file_states array, which is
not defined, so the test was always true and we always disabled
the menu entry.
Instead we only want to disable the menu entry if the current file
we are looking at has no file state information (git-gui is just a
very confused little process) or it is an untracked file (and we
cannot stage individual hunks).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Earlier when I rewrote the merge implementation for git-gui I broke
it such that the conflict markers for the "theirs" side of the hunk
was using a full SHA-1 ID in hex, rather than the name of the branch
the user had merged. This was because I got paranoid and passed off
the full SHA-1 to git-merge, instead of giving it the reference name
the user saw in the merge dialog.
I'd still like to resolve the SHA-1 upfront in git-gui and always use
that value throughout the merge, but I can't do that until we have a
full implementation of git-merge written in Tcl. Until then its more
important that the conflict markers be useful to the end-user, so we
need to pass off the ref name and not the SHA-1 ID.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
cehteh on #git noticed that secondary windows such as console
windows from push/fetch/merge or the blame browser failed on ion
when we tried to open them a second time.
The issue turned out to be the fact that on ion [winfo ismapped .]
returns false if . is not visible right now because it has been
obscured by another window in the same panel. So we need to keep
track of whether or not the root window has been displayed for this
application, and once it has been we cannot ever assume that ismapped
is going to return true.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
OS X sends Button-2 on a "real" right click, such as with a three
button mouse, or by using the two-finger trackpad click.
Signed-off-by: Väinö Järvelä <v@pp.inet.fi>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If there is no path currently shown in the diff viewer then we
were getting Tcl errors anytime the user right-clicked on the
diff viewer to bring up its popup menu. The bug here is caused
by trying to get the file_state for the empty string; this path
is never seen so we never have file_state for it. In such cases
we now disable the Stage Hunk For Commit option.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is just a small code movement to cleanup how we generate
the command line for a merge. I'm only doing it to make the
next series of changes slightly more readable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a replacement of all of the icons in our tree browser
window, as the prior icons just looked too 1980s Tk-ish. The
icons used here are actually from a KDE themed look, so they
might actually be familiar to some users of git-gui.
Aside from using more modern looking icons we now have a special
icon for executable blobs, to make them stand out from the normal
non-executable blobs. We also denote symlinks now with a different
icon, so they stand out from the other types of objects in the tree.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user looks at an untracked file in our diff pane we used
to offer "Stage Hunk For Commit" in the context menu when they
right-clicked in that pane. The problem is we don't actually
have any diff hunks in untracked files, so there is nothing to
really select for staging. So we now grey out the menu item,
so the user cannot invoke it and think its broken when it does
not perform any useful action.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are started for only a blame/browser/citool run we don't
usually initialize the list of remotes, or determine which refs
are tracking branches and which are local branch heads. This is
because some of that work is relatively expensive and is usually
not going to be needed if we are started only for a blame, or to
make a single commit.
However by not loading the remote configuration we were crashing
if the user tried to open a browser for another branch through
the Repository menu, as our load_all_heads procedure was unable
to decide which refs/heads/ items were actually local heads. We
now force all remote configuration data to be loaded if we have
not done so already and we are trying to create a revision mega
widget.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Resetting a large number of files on a slow filesystem can take
considerable time, just as switching branches in such a case can
take more than two seconds. We now take advantage of the progress
meter output by read-tree and show it in the main window status
bar, just like we do during checkout (branch switch).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Recent git versions have a git-status that honors the core.excludesfile
configuration option when it reports on untracked files. Unfortunately
I missed the introduction of this configuration option in the core
porcelain implementation, so it was not reflected here in git-gui.
Found and reported by Lars Noschinski <lars@public.noschinski.de>.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Also, the warning message when clicking "Reset" is adapted to
the wording "Reset" rather than a confusion "Cancel commit?".
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user is in the middle of a merge and has already started to
modify their commit message we were losing the user's changes when
they pressed 'Rescan' after resolving issues or making changes in
the working directory.
The problem here was our background timer that saves the commit
message buffer. It marks the commit message buffer as not being
modified when it writes it out to disk, so during the rescan we
assumed the buffer should be replaced with what we read from the
MERGE_MSG file. So we now only read these files from .git if we
have a valid backup file. Since we clear it on commit this will
only have an impact while the user is actively editing the current
commit.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are being asked to merge a tracking branch that comes from a
remote repository accessed by the very common SSH URL format of
"user@host:/path/to/repo" then we really don't need the username
as part of the merge message, it only clutters up the history and
makes things more confusing. So we instead clip the username part
off if the local filesystem path is absolute, as its probably not
going to be an ambiguous URL even when it is missing the username.
On the other hand we cannot clip the username off if the URL is
not absolute, because in such cases (e.g. "user@host:myrepo") the
directory that the repository path is resolved in is relative to
the user's home directory, and the username becomes important.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are merging a tracking branch we know exactly what remote URL
that branch is fetched from, and what its name is on that remote
repository. In this case we can setup a merge message that looks
just like a standard `git-pull $remote $branch` operation by filling
out FETCH_HEAD before we start git-merge, and then run git-merge just
like git-pull does.
I think the result of this behavior is that merges look a lot nicer
when the came off of local tracking branches, because they no longer
say "commit 'origin/...'" to describe the commit being merged but
instead now mention the specific repository we fetched those commits
from.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that we only support merging one branch we can offer the user
a better user interface experience by allowing them to select the
revision they want to merge through our revision picking widget.
This change neatly solves the problem of locating a branch out of
a sea of 200 tracking branches, and of dealing with very long branch
names that all have a common prefix.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we can we now show the last modification date of a loose ref as
part of the tooltip information shown in the revision picker. This
gives the user an indication of when was the last time that the ref
was modified locally, and may especially be of interest when looking
at a tracking branch.
If we cannot find the loose ref file than we try to fallback on the
reflog and scan it for the date of the last record. We don't start
with the reflog however as scanning it backwards from the end is not
an easy thing to do in Tcl. So I'm being lazy here and just going
through the entire file, line by line. Since that is less efficient
than a single stat system call, its our fallback strategy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Our revision chooser mega-widget now sets up tooltips for itself so
that it displays details about a commit (or a tag and the commit
it refers to) when the user mouses over that line in the filtered
ref list. If the item is from a remote tracking branch then we also
show the remote url and what branch on that remote we fetch from, so
the user has a clear concept of where that revision data originated.
To help the merge dialog I've also added a new constructor that
makes the dialog only offer unmerged revisions (those not in HEAD),
as this allows users to avoid performing merges only to get "Already
up to date" messages back from core Git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm storing the URLs of any pre-configured remote repositories
that we happen to come across so that we can later use these
URLs to show to the user in parts of the UI that might care.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are checking out the branch we are already on then there is no
need to call symbolic-ref to update the HEAD pointer to the "new"
branch name, it is already correct.
Currently this situation does not happen very often, but it can be
seen in some workflows where the user always recreates their local
branch from a remote tracking branch and more-or-less ignores what
branch he/she is on right now. As they say, ignorance is bliss.
This case will however become a tad more common when we overload
checkout_op to actually also perform all of our merges. In that
case we will likely see that the branch we want to "checkout" is
the current branch, as we are actually just merging into it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The i18n team has also identified a rather ugly block of code in
git-gui that is used to make a pair of Repository menu items show
the current branch name. This code is difficult to convert to use
[mc ...] to lookup the translation, so I'm refactoring it into a
procedure.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The folks working on the i18n version of git-gui have had some
trouble trying to convert these English strings into [mc] calls
due to the double evaluation. Moving this block into a standard
procedure eliminates the double evaluation, making their work
easier.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
My earlier introduction of the GITGUI_BCK file (which saves the user's
commit message buffer while they are typing it) broke the Quit function.
If the user makes a commit we delete the GITGUI_BCK file; if they then
immediately quit the application we fail to rename the GITGUI_BCK file
to GITGUI_MSG. This is because the file does not exist, but our flag
still says it does. The root cause is we did not unset the flag during
commit.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio recently pointed out on the mailing list that our "Add Existing"
feature is a lot like `git add -u`, which is generally described as
"(Re)Add Tracked Files". This came up during discussion of how to
translate "Add Existing" into Japanese, as the individual working on
the translation was not quite sure what the option meant and therefore
had some trouble selecting the best translation.
I'm changing the menu option to "Add Tracked Files To Commit" and the
button to "Add Tracked". This should help new users to better understand
the actions behind those GUI widgets.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are trying to checkout a local branch which is matched to a
remote tracking branch, but the local branch is newer than the remote
tracking branch we actually just want to switch to the local branch.
The local branch is "Already up to date".
Unfortunately we tossed away the local branch's commit SHA-1 and kept
the remote tracking branch's SHA-1, which meant that the user lost the
local changes when we updated the working directory. At least we did
not update the local branch ref, so the user's data was still intact.
We now toss the tracking branch's SHA-1 and replace with the local
branch's SHA-1 before the checkout, ensuring that we pass of the right
tree to git-read-tree when we update the working directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This menu option of Tools/Migrate has been living inside of git-gui
as a local hack to support some coworkers of mine. It has no value
to anyone outside of my day-job team and never really should have
been in a release version of git-gui. So I'm pulling it out, so
that nobody else has to deal with this garbage.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce