There's a lot of reasons why the user might need to obtain the
complete (or just part of) path of a file which they are currently
viewing in the diff viewer pane. So now we allow selection on this
widget by using a text widget instead of a label. We also offer a
context menu which has actions for copying the selection or the entire
value onto the clipboard.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we shove a large number of files at update-index and they have
very short path names we are likely going to fit a large number of
them into the pipe buffer very early; thereby seeing a huge progress
update followed by lots of waiting between progress updates due to
the latency of update-index.
Using a smaller buffer should help smooth out the progress updates
as we are better able to keep tabs on the update-index process'
progress through our list of paths.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its a little surprising to see the UI update the icons for files
in random order, due to the fact that the files are updating in
the order they appear within the array (which is based on a hash
function and not order). So sort the list of files before we send
any to update-index so the order of operation is means something to
the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When displaying a diff the Git default of 3 line of context may not be
enough for a user to see what has actually changed. Consequently we
set our own program default to 5 lines of context and then allow the
user to adjust this on a per-repository and global level through our
options dialog.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'd like to allow the user to have more control over how we format
the diff in the diff viewer; to that end we need to add additional
options to the diff-index command line as we construct the command
for execution.
So cleanup the command handling code now to use lappend so we can
come back and add in our additional options.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We can't ask the diff viewer to recompute the diff until after our
update-index child process terminates, as the diff programs need to
be able to read the updated index in order to generate the correct
diff. This is actually why we prevent diffs from being generated
while there is an update lock on the index, which is why we ignored
our own show_diff invocation in the middle of the write_update_index
event handler.
So now we mark a flag if we identify that the file currently in the
diff viewer was also sent to update-index; then later when the
update-index process has terminated we update the diff viewer if
the flag is true.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is one of those stupid Tcl mistakes that an experienced Tcl
programmer just wouldn't make. We should always use eq and ne to
compare string values (and never == or !=) as when we use ==/!=
Tcl will attempt to convert either side to numeric if one of the
two sides looks like a numeric. This could cause some trouble if
a file named "1" exists and a different file named "1.0" also exists;
their paths are equal according to == but not according to eq.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since git-commit.sh invokes hooks/post-commit after running git rerere
we should do the same if its available and executable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We were originally trying to use $commit_active to tell us if there was
a commit currently in progress, just so we didn't attempt to start a
second (parallel) one by mistake. But really the index lock handles
this for us as it won't let us lock the index if it is already locked
for update. So this can't happen.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I started to notice on Windows that commits took a lot longer to get
going than on my Mac OS X system. The real reason is the repositories
that I'm testing with on Windows all enabled the standard pre-commit hook
while my test repository on Mac OS X doesn't have it executable (so its
not running). So the Windows repositories are spending this
lag time running that hook.
Now we run the pre-commit hook in the background, allowing the UI to
update and tell the user we are busy doing things.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because the pull diffstat summary can take as long as the pull itself
some users may just choose to disable the summary and save themselves
an extra few seconds during each pull. This is especially true if the
user really doesn't care about the other files being modified, as due
to their project organizational structure they aren't really responsible
for their content.
This adds an option to the options panel which lets the user disable
the diffstat summary (and thus we pass --no-summary to git-pull) but
there does appear to be a bug in the config saving code where we did
not set the local repo config differently from the global config.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since git-repo-config will supply us a union of both the global and
the local repository configuration data when we invoke it during startup
there is no reason to go get the global configuration with an extra call
to repo-config unless the user is trying to view & edit all options in
the options dialog.
Since skipping this extra repo-config invocation save us a little bit of
time its nice to be able to avoid it when we are invoked as git-citool
and won't be running very long.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user is invoking us as git-citool then they want to perform a
single commit and exit quickly. Since we are about to be a very short
lived process we should do what we can to avoid spending CPU time setting
up menus which the user will never use, like the fetch/push/pull menus.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently Tcl is being helpful on Windows during exec and is throwing a
\ in front of every { it finds in the string. I'm guessing they think
the value might be read by another Tcl program? Anyway, Git faithfully
stores the \{ sequence and sends it back that way to Tcl, at which point
Tcl parses the list wrong and starts to break it in the middle of any
element which contains spaces. Therefore a list such as:
-family {Times New Roman}
gets broken up into the pairs:
{-family \{Times}
{New Roman}
which is very incorrect. So now we replace all { and } with "", at which
point Tcl doesn't throw \ in front of the " on the way out to Git yet it
reads it correctly as a list on the way back in.
I also found and fixed a bug in the way we restored the fonts when the
user presses Restore Defaults in the options dialog.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The tkwait visibility command and Windows doesn't seem to realize
the window is visible, consequently we are never finishing our
initialization by calling update_status.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since the font name can only be chosen from within the options dialog
giving the user fast access to this dialog from within a context menu
that already talks about increasing and decreasing the font size may
help users to locate the font name setting as well.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Display the name of "this" repository rather than the quite ambiguous
string "This". The idea is that seeing the name of the directory the
repository is stored in should help jog the user's memory about what
they are setting options for.
Also place the options dialog immediately over the git-gui main window
when it gets opened. This way the user isn't scrolling very far away
to gain access to the window. At least on my Mac OS X system not doing
this makes the options dialog open rather far away, thus requiring lots
of mouse activity to reach it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The git-update-index process can take a while to process a large
number of files; for example my laptop would probably need almost
an hour to chug through 20,000 modified files. In these incredibly
large cases the user should be given at least some feedback to let
them know the application is still working on their behalf, even if
it won't them do anything else (as the index is locked).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This turned out to take a lot more time than I thought it would take;
but now users can edit the main UI font and the diff/fixed with font
by changing both the family name and/or the point size of the text.
We save the complete Tk font specification to the user's ~/.gitconfig
file upon saving options. This is probably more verbose than it needs
to be as there are many useless options recorded (e.g. -overstrike 0)
that a user won't really want to use in this application.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I decided that the options menu was going to turn into a mess after
a while as I start to add additional features to git-gui. The better
approach would be to create a dialog that lets the user edit the options,
including their --global options.
We also wisely let the user press Cancel (or destroy the window) to abort
any sort of option editing session, without the options being changed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Arrow is available on all Tk platforms and is mapped to the native
system cursor on Windows and Mac OS X. Consequently its the better
cursor choice as it should match whatever the system has configured
for the standard pointing thingy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently <Button-3> doesn't work on my single button PowerBook
mouse under Mac OS X. I'm guessing this is because Tk is stealing
every event and doesn't realize that Control-Button-1 is actually
supposed to invoke the context menu on this platform.
So now we have a utility procedure is_MacOSX to guess if we are
running on a Mac OS X system, and if so setup Control-Button-1 to
also activate what Button-3 should have. This does mean that I need
to stay away from using Control-Button-1 as a binding in any other
context. Of course we should use $M1B for that, which is M1 (aka
Command) on Mac OS X so that shouldn't prove to be a problem.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The native Tk font system is actually quite powerful and has the nice
property that modifications to a named font are immediately reflected
throughout all widgets currently displayed. This really saves us
from needing to write all of the reconfigure code as part of our font
display.
I also fixed the way we detect and apply the system font on the main
UI widgets as although it worked on a Windows 2000 system it does not
work at all on my Mac OS 10.4 system.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the user has enabled the Trust File Modification Timestamp option
then we may display a file as being modified yet that file may not have
a difference. When the user clicks on that file we wind up displaying
an empty diff viewer, which makes no sense to the user.
So instead if we get an empty diff and the user has this option enabled
and the file's current state is _M (no change in index but the working
file appears modified) then run a quick update-index on just that file
and remove it from the list of modified files. We also give the user
a quick dialog stating we are removing it, and why.
Usually I don't run into this situation when I have the Trust File
Modification Timestamp option enabled, so its not that annoying to
have a dialog pop open to remind me why there are no differences.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because the diff area is one of the most important areas to be able to
read users should be able to increase or decrease the size of the font
used within that area.
Currently we save that back to the global configuration, even if it
may have originated from the local repository configuration. This
is probably going to be considered to be a bug by at least one user
who wants some sort of different font within a given repository, but
I'm just going to ignore the problem for now.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Rather than hardcoding our fonts to something that I thought was
reasonable, guess font_ui off the font used by the system in the
menu bar. This way the application conforms by default to whatever
the user's desktop is setup to.
We also now let the user supply font configuration through their
repository configuration as gui.fontui (the overall UI font) and
gui.fontdiff (the font used for the diff viewer).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we sign off on a commit we want to add a blank line between
whatever is in the commit buffer and the new Signed-off-by line,
unless there already is a Signed-off-by (or Acked-by) tag at the end
of the buffer already. This change makes us do the right thing more
often.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The mouse cursor (at least on Windows) seemed to be picking up the
cursor from the sash controls and then never resetting itself back
to the standard text cursor (the I-beam) when it was over a text area
that the user can edit (like the commit buffer) or over a text area
the user can copy from (like the diff viewer).
So now we always set the cursor to left_ptr (which according to the Tk
documentation should be available everywhere) and only for the two text
areas which we use to list file names, as the user clicks in these but
is not permitted to select text.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This change adds a context menu to the commit message buffer providing
fast access to the contents of the Edit menu, and to the console text
buffer, providing easy ways to copy selections of the buffer or the
entire buffer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Make sure the file_lists array has both elements set at all times,
otherwise we get Tcl errors during mouse clicks in the file list
areas due to the list not being defined.
Also added M1-A as a keyboard binding within the console window
text area. This lets users select all text easily and copy it
to the clipboard.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A number of lines were line wrapping in a rather ugly way when opened
in vim with line numbers enabled, so I split most of these lines over
two lines using a sensible wrapping policy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The gui.geometry config value was starting to contain
the odd string \\{ as part of its value due to the
way the Tcl lists were being supplied to git repo-config.
Now we write out only three values: the overall window
geomtry, the y position of the horizontal sash, and
the x position of the vertical sash. All other data is
skipped, which makes the gui.geometry value simpler.
While debugging this I noticed that the save_my_config
procedure was being invoked multiple times during exit
due to do_quit getting invoked over and over again. So
now we set a flag in do_quit and don't perform any of our
"at exit" type of logic if we've already been through the
do_quit procedure once.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Added an extra blank line between the first line of each error message
and the rest of the message, as usually the rest of the message is
coming from Tcl or is the stderr output of a git command we tried to
invoke. This makes it easier to read the output (if any).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Rather than drawing our own toplevel for error messages we really
should just use the the native tk_messageBox command to display
any error messages.
Major benefits for doing so are:
- automatically centers over main window;
- less code required on our part in git-gui;
- includes a nifty error icon on most systems;
- better fits the look-and-feel of the operating system.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I found difffont to be a very awkward varible name, due to the use
of three f's in a row. So use easier to read variable names.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we reshow the current diff file it can be faster to just fetch
the value from the file_states array than it is to ask for all paths
whose name exactly matches the one we want to show. This is because
[array names -exact] is O(n) in the number of files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we commit we know that whatever was in the index went as part
of the commit. Since we generally assume that the user does not
update the index except through our user interface we can be reasonably
certain that any file which was marked as A/M/D in the index will have
had that A/M/D state changed to an _ (not different) by the commit.
We can use this knowledge to update the user interface post commit
by simply updating the index part of the file state of all files whose
index state was A/M/D to _ and then removing any file memory any which
wound up with a final state of __ (not different anywhere). Finally we
redraw the file lists and update the diff view.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are given a file whose path name contains an LF (\n) we now
escape it by inserting the common escape string \n instead of the
LF character whenever we display the name in the UI. This way the
text fields don't start to span multiple lines just to display one
file, and it keeps the line numbers correct within the file lists.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we did a rescan to update the file lists we lost the tag which
indicated which file was currently in the diff viewer. This occurs
because we delete every line from the two file list boxes (thus
removing the tag) and then redisplay the diff in the diff viewer
but then fail to restore the tag in the file list.
Now we restore that tag by searching for the file in the file lists
and adding the tag back when the diff viewer displays something.
We also no longer obtain the file path directly from the file list
text box. Instead we now keep two Tcl lists, one for each file list,
holding the file names in sorted order. These lists can be searched
with the native [lsearch -sorted] operation (which should be faster
than our crude bsearch) or can be quickly accessed by index to return
the file path. This should help make things safer should we ever be
given a file name which contains an LF within it (as that would span
two lines in the file list, not one).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we load a message file (e.g. MERGE_MSG) or we have just finished
making a commit and are clearing out the commit buffer we should also
clear out the undo/redo stack associated with that buffer. The prior
undo/redo stack has no associated with the new content and therefore
is not useful to the user.
Also modified the sign-off operation to perform the entire update in
a single undo/redo operation, allowing the user to undo the signoff
in case they didn't actually want to do that.
I also noticed what may be a crash on Windows related to the up and
down arrow keys navigating within the diff viewer. Since I got back
no stack trace (just an application exit with a loss of the commit
message) I suspect that the binding to scroll the text widget crashed
with an error and the wish process just terminated. So now we catch
(and ignore) any sort of error related to the arrow keys in the diff
viewer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Users have come to expect basic editing features within their
applications, such as cut/copy/paste/undo/redo/select-all. I
found these features to be lacking in git-gui so now we have
them.
I also added basic keyboard bindings for the diff viewing area
so that the arrow keys move around single units (lines or columns)
and the M1-X/C keys will copy the selected text and the M1-A key
will select the entire diff.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that we call the update-index all files action "Include All" it
makes more sense to make this M1-I (so Control-I or Command-I depending
on platform) than M1-U, which stood for update but is somewhat confusing
to users.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I started to find it very annoying that my test application kept
opening at the wrong location on my desktop, so now we save the
basic window geometry and sash positions into the config file as
gui.geometry.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Caching the Signed-Off-By line isn't very important (as its not
performance critical). The major improvement here is that we
now report an error to the user if we can't obtain their name
from git-var.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's really no great reason to show the entire commit object id
within the GUI, especially if the user is unable to copy and paste
it into another interface such as gitk or a terminal window. So
we'll just show them the first 8 digits and hope that is unique
within their repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
At least one user was confused by the term 'check-in'; he thought that
clicking that button would commit just that one file, but he wanted to
include all modified files into his next commit.
Since git doesn't really have a check-in concept this really was poor
language to use. Git does have an update-index concept but that is a
little too low level to show to the user.
So instead we now talk about including files in a commit.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When a file jumps between the file lists due to its state changing we
crashed thanks to a stale variable reference within the procedure as we
tried to setup the new icon.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce