"git pack-redundant" has been marked for removal in Git 3.0.
* ps/declare-pack-redundamt-dead:
Documentation/BreakingChanges: announce removal of git-pack-redundant(1)
--ours, --theirs, and --union are already supported in `git merge-file`
for automatically resolving conflicts in favor of one version or the
other, instead of leaving conflict markers in the file. Support them in
`git apply -3` as well because the two commands do the same kind of
file-level merges.
In case in the future --ours, --theirs, and --union gain a meaning
outside of three-way-merges, they do not imply --3way but rather must be
specified alongside it.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when 7cc91a2f (Add the configuration option skipFetchAll,
2009-11-09) added for the sole purpose of adding skipFetchAll as a
synonym to skipDefaultUpdate, there was no explanation about the
reason why it was needed., but these two configuration variables
mean exactly the same thing.
Also, when we taught the "prefetch" task to "git maintenance" later,
we did make it pay attention to the setting, but we forgot to
document it.
Document these variables as synonyms that collectively implements
the last-one-wins semantics, and also clarify that the prefetch task
is also controlled by this variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_ADVICE environment variable was added implicitly in b79deeb554
(advice: add --no-advice global option, 2024-05-03) but was not
documented. Add documentation to show that it is an option for tools
that want to disable these messages. Make note that while the
--no-advice option exists, older Git versions will fail to parse that
option. The environment variable presents a way to change the behavior
of Git versions that understand it without disrupting older versions.
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some large repositories use tags to track a huge list of release
versions. While this choice is costly on the ref advertisement, it is
further wasteful for clients who do not need those tags. Allow clients
to optionally skip the tag advertisement.
This behavior is similar to that of 'git clone --no-tags' implemented in
0dab2468ee (clone: add a --no-tags option to clone without tags,
2017-04-26), including the modification of the remote.origin.tagOpt
config value to include "--no-tags".
One thing that is opposite of the 'git clone' implementation is that
this allows '--tags' as an assumed option, which can be naturally negated
with '--no-tags'. The clone command does not accept '--tags' but allows
"--no-no-tags" as the negation of its '--no-tags' option.
While testing this option, combine the test with the previously untested
'--no-src' option introduced in 4527db8ff8 (scalar: add --[no-]src
option, 2023-08-28).
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make our codebase compilable with the -Werror=unused-parameter
option.
* jk/unused-parameters:
CodingGuidelines: mention -Wunused-parameter and UNUSED
config.mak.dev: enable -Wunused-parameter by default
compat: mark unused parameters in win32/mingw functions
compat: disable -Wunused-parameter in win32/headless.c
compat: disable -Wunused-parameter in 3rd-party code
t-reftable-readwrite: mark unused parameter in callback function
gc: mark unused config parameter in virtual functions
Our unit testing framework is a homegrown solution. While it supports
most of our needs, it is likely that the volume of unit tests will grow
quite a bit in the future such that we can exercise low-level subsystems
directly. This surfaces several shortcomings that the current solution
has:
- There is no way to run only one specific tests. While some of our
unit tests wire this up manually, others don't. In general, it
requires quite a bit of boilerplate to get this set up correctly.
- Failures do not cause a test to stop execution directly. Instead,
the test author needs to return manually whenever an assertion
fails. This is rather verbose and is not done correctly in most of
our unit tests.
- Wiring up a new testcase requires both implementing the test
function and calling it in the respective test suite's main
function, which is creating code duplication.
We can of course fix all of these issues ourselves, but that feels
rather pointless when there are already so many unit testing frameworks
out there that have those features.
We line out some requirements for any unit testing framework in
"Documentation/technical/unit-tests.txt". The "clar" unit testing
framework, which isn't listed in that table yet, ticks many of the
boxes:
- It is licensed under ISC, which is compatible.
- It is easily vendorable because it is rather tiny at around 1200
lines of code.
- It is easily hackable due to the same reason.
- It has TAP support.
- It has skippable tests.
- It preprocesses test files in order to extract test functions, which
then get wired up automatically.
While it's not perfect, the fact that clar originates from the libgit2
project means that it should be rather easy for us to collaborate with
upstream to plug any gaps.
Import the clar unit testing framework at commit 1516124 (Merge pull
request #97 from pks-t/pks-whitespace-fixes, 2024-08-15). The framework
will be wired up in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-pack-redundant(1) command is already in the process of being
phased out and dies unless the user passes the `--i-still-use-this` flag
since 4406522b76 (pack-redundant: escalate deprecation warning to an
error, 2023-03-23). We haven't heard any complaints, so let's announce
the removal of this command in Git 3.0 in our breaking changes document.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More trace2 events at key points on push and fetch code paths have
been added.
* js/fetch-push-trace2-annotation:
send-pack: add new tracing regions for push
fetch: add top-level trace2 regions
trace2: implement trace2_printf() for event target
A function that uses a parameter in one build may lose all uses of
the parameter in another build, depending on the configuration. A
workaround for such a case, MAYBE_UNUSED, should also be mentioned
when we recommend the use of UNUSED to our developers.
Keep the addition to the guideline short and document the criteria
to choose between UNUSED and MAYBE_UNUSED near their definition.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/unused-parameters:
CodingGuidelines: mention -Wunused-parameter and UNUSED
config.mak.dev: enable -Wunused-parameter by default
compat: mark unused parameters in win32/mingw functions
compat: disable -Wunused-parameter in win32/headless.c
compat: disable -Wunused-parameter in 3rd-party code
t-reftable-readwrite: mark unused parameter in callback function
gc: mark unused config parameter in virtual functions
Now that -Wunused-parameter is on by default for DEVELOPER=1 builds,
people may trigger it, blocking their build. When it's a mistake for the
parameter to exist, the path forward is obvious: remove it. But
sometimes you need to suppress the warning, and the "UNUSED" mechanism
for that is specific to our project, so people may not know about it.
Let's put some advice in CodingGuidelines, including an example warning
message. That should help people who grep for the warning text after
seeing it from the compiler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git check-mailmap command reads the mailmap from either the default
.mailmap location and then from the mailmap.blob and mailmap.file
configurations.
A following change to git send-email will want to support new
configuration options based on the configured identity. The
identity-based configuration and options only make sense in the context
of git send-email.
Expose the read_mailmap_file and read_mailmap_blob functions from
mailmap.c. Teach git check-mailmap the --mailmap-file and
--mailmap-blob options which load the additional mailmap sources.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git check-mailmap splits each provided contact using split_ident_line.
This function requires that the contact either be of the form "Name
<user@host>" or of the form "<user@host>". In particular, if the mail
portion of the contact is not surrounded by angle brackets,
split_ident_line will reject it.
This results in git check-mailmap rejecting attempts to translate simple
email addresses:
$ git check-mailmap user@host
fatal: unable to parse contact: user@host
This limits the usability of check-mailmap as it requires placing angle
brackets around plain email addresses.
In particular, attempting to use git check-mailmap to support mapping
addresses in git send-email is not straight forward. The sanitization
and validation functions in git send-email strip angle brackets from
plain email addresses. It is not trivial to add brackets prior to
invoking git check-mailmap.
Instead, modify check_mailmap() to allow such strings as contacts. In
particular, treat any line which cannot be split by split_ident_line as
a simple email address.
No attempt is made to actually parse the address line, or validate that
it is actually an email address. Implementing such validation is not
trivial. Besides, we weren't validating the address between angle
brackets before anyways.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsis says --regexp=<regexp> but the --regexp option is a
Boolean that says "the name given is not literal, but a pattern to
match the name".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git config --get-all foo.bar" shows all values for the foo.bar
variable, but does not give the variable name in each output entry.
Hence it is equivalent to "git config get --all foo.bar", without
"--show-names", in the more modern syntax.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git for-each-ref' learned a new "--format" atom to find the branch
that the history leading to a given commit "%(is-base:<commit>)" is
likely based on.
* ds/for-each-ref-is-base:
p1500: add is-base performance tests
for-each-ref: add 'is-base' token
commit: add gentle reference lookup method
commit-reach: add get_branch_base_for_tip
"git send-email" learned "--translate-aliases" option that reads
addresses from the standard input and emits the result of applying
aliases on them to the standard output.
* jk/send-email-translate-aliases:
send-email: teach git send-email option to translate aliases
t9001-send-email.sh: update alias list used for pine test
t9001-send-email.sh: fix quoting for mailrc --dump-aliases test
Maintenance tasks other than "gc" now properly go background when
"git maintenance" runs them.
* ps/maintenance-detach-fix:
run-command: fix detaching when running auto maintenance
builtin/maintenance: add a `--detach` flag
builtin/gc: add a `--detach` flag
builtin/gc: stop processing log file on signal
builtin/gc: fix leaking config values
builtin/gc: refactor to read config into structure
config: fix constness of out parameter for `git_config_get_expiry()`
The default object hash and ref backend format used to be settable
only with explicit command line option to "git init" and
environment variables, but now they can be configured in the user's
global and system wide configuration.
* ps/hash-and-ref-format-from-config:
setup: make ref storage format configurable via config
setup: make object format configurable via config
setup: merge configuration of repository formats
t0001: delete repositories when object format tests finish
t0001: exercise initialization with ref formats more thoroughly
Commit 4e51389000 (builtin/config: introduce "get" subcommand, 2024-05-06)
introduced this typo. It uses 3 dashes for regexp argument instead of
correct 2 dashes.
Signed-off-by: Celeste Liu <CoelacanthusHex@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The trace2 event target does not have an implementation for
trace2_printf(). While the event target is for structured events, and
trace2_printf() is for unstructured, human-readable messages, it may
still be useful to wrap these unstructured messages in a structured JSON
object. Among other things, it may reduce confusion when manually
debugging using event trace data.
Add a simple implementation for the event target that wraps
trace2_printf() messages in a minimal JSON object. Document this in
Documentation/technical/api-trace2.txt, and bump the event format
version since we're adding a new event type.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The batched mode of git-cat-file(1) reads multiple objects from stdin
and prints their respective contents to stdout.
The order in which those objects are printed is not documented
and may not be immediately obvious to the user.
Document it.
Signed-off-by: ahmed akef <aemed.akef.1@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git svn" has been taught about svn:global-ignores property
recent versions of Subversion has.
* ag/git-svn-global-ignores:
git-svn: mention `svn:global-ignores` in help+docs
git-svn: use `svn:global-ignores` to create .gitignore
git-svn: add public property `svn:global-ignores`
As we have operated with "write like how your surrounding code is
written" for too long, after a huge code drop from another project,
we'll end up being inconsistent before such an imported code is
cleaned up. We have many uses of cast operator with a space before
its operand, mostly in the reftable code.
Spell the convention out before it spreads to other places.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git send-email has support for converting shorthand alias names to
canonical email addresses via the alias file. It supports a wide variety
of alias file formats based on popular email program file formats.
Other programs, such as b4, would like the ability to convert aliases in
the same way as git send-email without needing to re-implement the logic
for understanding the many file formats.
Teach git send-email a new option, --translate-aliases, which will
enable this functionality. Similar to --dump-aliases, this option works
like a new mode of operation for git send-email.
When run with --translate-aliases, git send-email reads from standard
input and converts any provided alias into its canonical name and email
according to the alias file. Each expanded name and address is printed
to standard output, one per line.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" infrastructure has been taught to also check the sanity
of the ref database, in addition to the object database.
* sj/ref-fsck:
fsck: add ref name check for files backend
files-backend: add unified interface for refs scanning
builtin/refs: add verify subcommand
refs: set up ref consistency check infrastructure
fsck: add refs report function
fsck: add a unified interface for reporting fsck messages
fsck: make "fsck_error" callback generic
fsck: rename objects-related fsck error functions
fsck: rename "skiplist" to "skip_oids"
"git rebase --help" referred to "offset" (the difference between
the location a change was taken from and the change gets replaced)
incorrectly and called it "fuzz", which has been corrected.
* jc/doc-rebase-fuzz-vs-offset-fix:
doc: difference in location to apply is "offset", not "fuzz"
It has been documented that we avoid "VAR=VAL shell_func" and why.
* jc/doc-one-shot-export-with-shell-func:
CodingGuidelines: document a shell that "fails" "VAR=VAL shell_func"
Similar to the preceding commit, introduce a new "init.defaultRefFormat"
config that allows the user to globally set the ref storage format used
by newly created repositories.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object format for repositories can either be configured explicitly
by passing the `--object-format=` option to git-init(1) or git-clone(1),
or globally by setting the `GIT_DEFAULT_HASH` environment variable.
While the former makes sense, setting random environment variables is
not really a good user experience in case someone decides to only use
SHA256 repositories.
It is only natural to expect for a user that things like this can also
be configured via their config. As such, introduce a new config
"init.defaultObjectFormat", similar to "init.defaultBranch", that allows
the user to configure the default object format when creating new repos.
The precedence order now is the following, where the first one wins:
1. The `--object-format=` switch.
2. The `GIT_DEFAULT_HASH` environment variable.
3. The `init.defaultObjectFormat` config variable.
This matches the typical precedence order we use in Git. We typically
let the environment override the config such that the latter can easily
be overridden on an ephemeral basis, for example by scripts.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the past, we used to execute `git gc --auto` as part of our automatic
housekeeping routines. As git-gc(1) may require quite some time to
perform the housekeeping, it knows to detach itself and run in the
background so that the user can continue their work.
Eventually, we refactored our automatic housekeeping to instead use the
more flexible git-maintenance(1) command. The upside of this new infra
is that the user can configure which maintenance tasks are performed, at
least to a certain degree. So while it continues to run git-gc(1) by
default, it can also be adapted to e.g. use git-multi-pack-index(1) for
maintenance of the object database.
The auto-detach of the new infra is somewhat broken though once the user
configures non-standard tasks. The problem is essentially that we detach
at the wrong level in the process hierarchy: git-maintenance(1) never
detaches itself, but instead it continues to be git-gc(1) which does.
When configured to only run the git-gc(1) maintenance task, then the
result is basically the same as before. But when configured to run other
tasks, then git-maintenance(1) will wait for these to run to completion.
Even worse, it may be that git-gc(1) runs concurrently with other
housekeeping tasks, stomping on each others feet.
Fix this bug by asking git-gc(1) to not detach when it is being invoked
via git-maintenance(1). Instead, git-maintenance(1) now respects a new
config "maintenance.autoDetach", the equivalent of "gc.autoDetach", and
detaches itself into the background when running as part of our auto
maintenance. This should continue to behave the same for all users which
use the git-gc(1) task, only. For others though, it means that we now
properly perform all tasks in the background. The default behaviour of
git-maintenance(1) when executed by the user does not change, it will
remain in the foreground unless they pass the `--detach` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running `git gc --auto`, the command will by default detach and
continue running in the background. This behaviour can be tweaked via
the `gc.autoDetach` config, but not via a command line switch. We need
that in a subsequent commit though, where git-maintenance(1) will want
to ask its git-gc(1) child process to not detach anymore.
Add a `--[no-]detach` flag that does this for us.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support to specify ref backend for submodules has been enhanced.
* ps/submodule-ref-format:
object: fix leaking packfiles when closing object store
submodule: fix leaking seen submodule names
submodule: fix leaking fetch tasks
builtin/submodule: allow "add" to use different ref storage format
refs: fix ref storage format for submodule ref stores
builtin/clone: propagate ref storage format to submodules
builtin/submodule: allow cloning with different ref storage format
git-submodule.sh: break overly long command lines
A policy document that describes platform support levels and
expectation on platform stakeholders has been introduced.
* es/doc-platform-support-policy:
Documentation: add platform support policy
Forgot to mention that the preformatted documentation repositories
are updated every time the master branch of the project advances.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git-SVN was previously taught to use the svn:global-ignores property as
well as svn:ignore when creating or showing .gitignore files from a
Subversion repository. However, the documentation and help message still
only mentioned svn:ignore. Update Git-SVN's documentation and help
command to mention support for the new property. Also capitalize the
help message for the 'mkdirs' command, for consistency.
Signed-off-by: Alex Galvin <agalvin@comqi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The value of http.proxy can have "path" at the end for a socks
proxy that listens to a unix-domain socket, but we started to
discard it when we taught proxy auth code path to use the
credential helpers, which has been corrected.
* rh/http-proxy-path:
http: do not ignore proxy path
The previous change introduced the get_branch_base_for_tip() method in
commit-reach.c. The motivation of that change was about using a heuristic to
deteremine the base branch for a source commit from a list of candidate
commit tips. This change makes that algorithm visible to users via a new
atom in the 'git for-each-ref' format. This change is very similar to the
chang in 49abcd21da (for-each-ref: add ahead-behind format atom,
2023-03-20).
Introduce the 'is-base:<source>' atom, which will indicate that the
algorithm should be computed and the result of the algorithm is reported
using an indicator of the form '(<source>)'. For example, using
'%(is-base:HEAD)' would result in one line having the token '(HEAD)'.
Use the sorted order of refs included in the ref filter to break ties in the
algorithm's heuristic. In the previous change, the motivating examples
include using an L0 trunk, long-lived L1 branches, and temporary release
branches. A caller could communicate the ordered preference among these
categories using the input refpecs and avoiding a different sort mechanism.
This sorting behavior is tested in the test scripts.
It is important to include this atom as a special case to
can_do_iterative_format() to match the expectations created in bd98f9774e
(ref-filter.c: filter & format refs in the same callback, 2023-11-14). The
ahead-behind atom was one of the special cases, and this similarly requires
using an algorithm across all input refs before starting the format of any
single ref.
In the test script, the format tokens use colons or lack whitespace to avoid
Git complaining about trailing whitespace errors.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some project conventions have been added to CodingGuidelines.
* ps/doc-more-c-coding-guidelines:
Documentation: consistently use spaces inside initializers
Documentation: document idiomatic function names
Documentation: document naming schema for structs and their functions
Documentation: clarify indentation style for C preprocessor directives
clang-format: fix indentation width for preprocessor directives
The git-fsck(1) only implicitly checks the reference, it does not fully
check refs with bad format name such as standalone "@".
However, a file ending with ".lock" should not be marked as having a bad
ref name. It is expected that concurrent writers may have such lock files.
We currently ignore this situation. But for bare ".lock" file, we will
report it as error.
In order to provide such checks, add a new fsck message id "badRefName"
with default ERROR type. Use existing "check_refname_format" to explicit
check the ref name. And add a new unit test to verify the functionality.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For refs and reflogs, we need to scan its corresponding directories to
check every regular file or symbolic link which shares the same pattern.
Introduce a unified interface for scanning directories for
files-backend.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new subcommand "verify" in git-refs(1) to allow the user to
check the reference database consistency and also this subcommand will
be used as the entry point of checking refs for "git-fsck(1)".
Add "verbose" field into "fsck_options" to indicate whether we should
print verbose messages when checking refs and objects consistency.
Remove bit-field for "strict" field, this is because we cannot take
address of a bit-field which makes it unhandy to set member variables
when parsing the command line options.
The "git-fsck(1)" declares "fsck_options" variable with "static"
identifier which avoids complaint by the leak-checker. However, in
"git-refs verify", we need to do memory clean manually. Thus add
"fsck_options_clear" function in "fsck.c" to provide memory clean
operation.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Same as with "clone", users may want to add a submodule to a repository
with a non-default ref storage format. Wire up a new `--ref-format=`
option that works the same as for `git submodule clone`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As submodules are proper self-contained repositories, it is perfectly
valid for them to have a different ref storage format than their parent
repository. There is no obvious way for users to ask for the ref storage
format when initializing submodules though. Whether the setup of such
mixed-ref-storage-format constellations is all that useful remains to be
seen. But there is no good reason to not expose such an option, and we
will require it in a subsequent patch.
Introduce a new `--ref-format=` option for git-submodule(1) that allows
the user to pick the ref storage format. This option will also be used
in a subsequent commit, where we start to propagate the same flag from
git-clone(1) to cloning submodules with the `--recursive` switch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the rest of the MIDX subsystem and relevant callers have been
updated to learn about how to read and process incremental MIDX chains,
let's finally update the implementation in `write_midx_internal()` to be
able to write incremental MIDX chains.
This new feature is available behind the `--incremental` option for the
`multi-pack-index` builtin, like so:
$ git multi-pack-index write --incremental
The implementation for doing so is relatively straightforward, and boils
down to a handful of different kinds of changes implemented in this
patch:
- The `compute_sorted_entries()` function is taught to reject objects
which appear in any existing MIDX layer.
- Functions like `write_midx_revindex()` are adjusted to write
pack_order values which are offset by the number of objects in the
base MIDX layer.
- The end of `write_midx_internal()` is adjusted to move
non-incremental MIDX files when necessary (i.e. when creating an
incremental chain with an existing non-incremental MIDX in the
repository).
There are a handful of other changes that are introduced, like new
functions to clear incremental MIDX files that are unrelated to the
current chain (using the same "keep_hash" mechanism as in the
non-incremental case).
The tests explicitly exercising the new incremental MIDX feature are
relatively limited for two reasons:
1. Most of the "interesting" behavior is already thoroughly covered in
t5319-multi-pack-index.sh, which handles the core logic of reading
objects through a MIDX.
The new tests in t5334-incremental-multi-pack-index.sh are mostly
focused on creating and destroying incremental MIDXs, as well as
stitching their results together across layers.
2. A new GIT_TEST environment variable is added called
"GIT_TEST_MULTI_PACK_INDEX_WRITE_INCREMENTAL", which modifies the
entire test suite to write incremental MIDXs after repacking when
combined with the "GIT_TEST_MULTI_PACK_INDEX" variable.
This exercises the long tail of other interesting behavior that is
defined implicitly throughout the rest of the CI suite. It is
likewise added to the linux-TEST-vars job.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare to implement incremental multi-pack indexes (MIDXs) over the
next several commits by first describing the relevant prerequisites
(like a new chunk in the MIDX format, the directory structure for
incremental MIDXs, etc.)
The format is described in detail in the patch contents below, but the
high-level description is as follows.
Incremental MIDXs live in $GIT_DIR/objects/pack/multi-pack-index.d, and
each `*.midx` within that directory has a single "parent" MIDX, which is
the MIDX layer immediately before it in the MIDX chain. The chain order
resides in a file 'multi-pack-index-chain' in the same directory.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Supporting many platforms is only possible when we have the right tools to
ensure that support.
Teach platform maintainers how they can help us to help them, by
explaining what kind of tooling support we would like to have, and what
level of support becomes available as a result. Provide examples so that
platform maintainers can see what we're asking for in practice.
With this policy in place, we can make changes with stronger assurance
that we are not breaking anybody we promised not to. Instead, we can
feel confident that our existing testing and integration practices
protect those who care from breakage.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for `http.proxy` describes that option, and the
environment variables it overrides, as supporting "the syntax understood
by curl". curl allows SOCKS proxies to use a path to a Unix domain
socket, like `socks5h://localhost/path/to/socket.sock`. Git should
therefore include, if present, the path part of the proxy URL in what it
passes to libcurl.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ryan Hendrickson <ryan.hendrickson@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reviewing guidelines document now explicitly encourages people
to give positive reviews and how.
* jc/doc-reviewing-guidelines-positive-reviews:
ReviewingGuidelines: encourage positive reviews more
"git rebase --help" referred to "offset" (the difference between
the location a change was taken from and the change gets replaced)
incorrectly and called it "fuzz", which has been corrected.
* jc/doc-rebase-fuzz-vs-offset-fix:
doc: difference in location to apply is "offset", not "fuzz"
It has been documented that we avoid "VAR=VAL shell_func" and why.
* jc/doc-one-shot-export-with-shell-func:
CodingGuidelines: document a shell that "fails" "VAR=VAL shell_func"
Our coding guide is inconsistent with how it uses spaces inside of
initializers (`struct foo bar = { something }`). While we mostly carry
the space between open and closing braces and the initialized members,
in one case we don't.
Fix this one instance such that we consistently carry the space. This is
also consistent with how clang-format formats such initializers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We semi-regularly have discussions around whether a function shall be
named `S_release()`, `S_clear()` or `S_free()`. Indeed, it may not be
obvious which of these is preferable as we never really defined what
each of these variants means exactly.
Carve out a space where we can add idiomatic names for common functions
in our coding guidelines and define each of those functions. Like this,
we can get to a shared understanding of their respective semantics and
can easily point towards our style guide in future discussions such that
our codebase becomes more consistent over time.
Note that the intent is not to rename all functions which violate these
semantics right away. Rather, the intent is to slowly converge towards a
common style over time.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We nowadays have a proper mishmash of struct-related functions that are
called `<verb>_<struct>` (e.g. `clear_prio_queue()`) versus functions
that are called `<struct>_<verb>` (e.g. `strbuf_clear()`). While the
former style may be easier to tie into a spoken conversation, most of
our communication happens in text anyway. Furthermore, prefixing
functions with the name of the structure they operate on makes it way
easier to group them together, see which functions are related, and will
also help folks who are using code completion.
Let's thus settle on one style, namely the one where functions start
with the name of the structure they operate on.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit, we have settled on using a single space per
nesting level to indent preprocessor directives. Clarify our coding
guidelines accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --format option on the git-ls-files man page states that `%xx`
interpolates to the character with hex code `xx`. This mirrors the
documentation and behavior of `git for-each-ref --format=...`. However,
in reality it requires the character with code `XX` to be specified as
`%xXX`, mirroring the behaviour of `git log --format`.
Signed-off-by: Jayson Rhynas <jayrhynas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation to "git rebase" says that the line numbers (in the
rebased change) may not exactly be the same as the line numbers the
change gets replayed on top of the new base, but uses a wrong noun
"fuzz". It should have said "offset".
They are both terms of art. "fuzz" is about context lines not
exactly matching. "offset" is about the difference in the location
that a change was taken from the original and the change gets
replayed on the target. "offset" is often inevitable and part of
normal life. "fuzz" on the other hand is often a sign of trouble
(and indeed "Git" refuses to apply a change with "fuzz", except
there are options to be fuzzy about whitespaces).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I saw some contributors hesitate to give a positive review on
patches by their coworkers. When written well, a positive review
does not have to be a hollow "looks good" that rubber stamps an
useless approval on a topic that is not interesting to others.
Let's add a few paragraphs to encourage positive reviews, which is a
bit harder to give than a review to point out things to improve.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around asciidoctor's css that renders `monospace` material
in the SYNOPSIS section of manual pages as block elements.
* js/doc-markup-updates-fix:
Doc: fix Asciidoctor css workaround
asciidoctor: fix `synopsis` rendering
The previous step introduced docinfo.html to be used to tweak the
CSS used by the asciidoctor, that by default renders <code> inside
<pre> as a block element, breaking the SYNOPSIS section of a few
pages that adopted a new convention we use since Git 2.45.
But in this project, HTML files are all generated. We do not force
any human to write HTML by hand, which is an unusual and cruel
punishment. "*.html" is in the .gitignore file, and "make clean"
removes them. Having a tracked .html file makes "make clean" make
the tree dirty by removing the tracked docinfo.html file.
Let's do an obvious, minimum and stupid workaround to generate that
file at runtime instead. The mark-up is being rethought in a major
way for the next development cycle, and the CSS workaround we added
in the previous step may have to adjusted, possibly in a large way,
anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over the years, we accumulated the community wisdom to avoid the
common "one-short export" construct for shell functions, but seem to
have lost on which exact platform it is known to fail. Now during
an investigation on a breakage for a recent topic, we found one
example of failing shell. Let's document that.
This does *not* mean that we can freely start using the construct
once Ubuntu 20.04 is retired. But it does mean that we cannot use
the construct until Ubuntu 20.04 is fully retired from the machines
that matter. Moreover, posix explicitly says that the behaviour for
the construct is unspecified.
Helped-by: Kyle Lippincott <spectral@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second line of the synopsis, starting with [--dry-run] has a
dangling closing paren in the second optional group. Probably added by
mistake, so remove it.
Signed-off-by: Tomas Nordin <tomasn@posteo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 76880f0510 (doc: git-clone: apply new documentation formatting
guidelines, 2024-03-29), the synopsis of `git clone`'s manual page is
rendered differently than before; Its parent commit did the same for
`git init`.
The result looks quite nice. When rendered with AsciiDoc, that is. When
rendered using AsciiDoctor and displayed in a graphical web browser such
as Firefox, Chrome, Edge, etc, the result is quite unpleasant to my eye,
reading something like this:
SYNOPSIS
git clone
[
--template=
<template-directory>]
[
-l
] [
-s
] [
--no-hardlinks
] [
-q
] [
[... continuing like this ...]
The reason is that AsciiDoctor's default style sheet contains this (see
https://github.com/asciidoctor/asciidoctor/blob/854923b15533/src/stylesheets/asciidoctor.css#L519-L521
for context):
pre > code {
display: block;
}
It is this `display: block` that forces the parts that are enclosed in
`<code>` tags (such as the `git clone` or the `--template=` part) to be
rendered on their own line.
Side note: This seems not to affect console web browsers like `lynx` or
`w3m`, most likely because most style sheet directions cannot be
respected in text terminals and therefore they seem to punt on style
sheets altogether.
To fix this, let's apply the method recommended by AsciiDoctor in
https://docs.asciidoctor.org/asciidoctor/latest/html-backend/default-stylesheet/#customize-docinfo
to partially override AsciiDoctor's default style sheet so that the
`<code>` sections of the synopsis are no longer each rendered on their
own, individual lines.
This fixes https://github.com/git-for-windows/git/issues/5063.
Even on the Git home page, where AsciiDoctor's default stylesheet is
_not_ used, this change resulted in some unpleasant rendering where not
only the font is changed for the `<code>` sections of the synopsis, but
padding and a different background color make the visual impression
quite uneven. This has been addressed in the meantime, via
https://github.com/git/git-scm.com/commit/a492d0565512.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc.py does not have the concept of generalized roles, whereas
asciidoctor interprets [foo]`blah` as blah with role foo in the
synopsis, making in effect foo disappear in the output. Note that
square brackets not directly followed by an inline markup do not
define a role, which is why we do not have the issue on other parts of
the documentation.
In order to get a consistant result across asciidoctor and
asciidoc.py, the hack is to use the {empty} entity
to split the bracket part from the inline format part.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some "implementation details" of how I perform these integration
tasks day to day have changed since the document was originally
written. Update to reflect the way things are currently done.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "policy" part is more important than the "daily operation" part
in that it establishes why certain maintainer tasks exist and are
performed the way they are.
The text briefly touches the role each integration branches play in
the workflow, but does not give the whole picture of what happens in
a single development cycle using these branches. Extend the
description to describe a whole development cycle.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
What happens when http.cookieFile gets the special value "" has
been clarified in the documentation.
* ps/doc-http-empty-cookiefile:
doc: update http.cookieFile with in-memory cookie processing
When `core.maxTreeDepth` was originally introduced via be20128bfa (add
core.maxTreeDepth config, 2023-08-31), its default value was 4096.
There have since been a couple of updates to its default value that were
not reflected in the documentation for `core.maxTreeDepth`:
- 4d5693ba05 (lower core.maxTreeDepth default to 2048, 2023-08-31)
- b64d78ad02 (max_tree_depth: lower it for MSVC to avoid stack
overflows, 2023-11-01)
Commit 4d5693ba05 lowers the default to 2048 for platforms with smaller
stack sizes, and commit b64d78ad02 lowers the default even further when
Git is compiled with MSVC.
Neither of these changes were reflected in the documentation, which I
noticed while merging newer releases back into GitHub's private fork
(which contained the original implementation of `core.maxTreeDepth`).
Update the documentation to reflect what the platform-specific default
values are.
Noticed-by: Keith W. Campbell <keithc@ca.ibm.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This document contains a few sample config snippets. At least with
Asciidoctor, the section headers are rendered *more* indented than the
variables that follow:
[bitmapPseudoMerge "all"]
pattern = "refs/"
...
To address this, wrap these listings in AsciiDoc listing blocks. Remove
the indentation from the section headings. This is similar to how we
handle such sample config elsewhere, e.g., in config.txt.
While we're here, fix the nearby "wiht" typo.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of entries are added to the GitFAQ document.
* bc/gitfaq-more:
doc: mention that proxies must be completely transparent
gitfaq: add entry about syncing working trees
gitfaq: give advice on using eol attribute in gitattributes
gitfaq: add documentation on proxies
The http transport can now be told to send request with
authentication material without first getting a 401 response.
* bc/http-proactive-auth:
http: allow authenticating proactively
A new warning message is issued when a command has to expand a
sparse index to handle working tree cruft that are outside of the
sparse checkout.
* ds/advice-sparse-index-expansion:
advice: warn when sparse index expands
The `githooks` documentation mentions that the post-receive hook
executes once after git-receive-pack(1) updates all references and that
it also receives the same information as the pre-receive hook on
standard input. This is misleading though because the hook only
executes once if at least one of the attempted reference updates is
successful. Also, while each line provided on standard input is in the
same format as the pre-receive hook, the information received only
includes the set of references that were successfully updated.
Update the documentation to clarify these points and also provide a
reference to the post-receive hook section of the `git-receive-pack`
documentation which has additional information.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted Porcelain commands do not allow use of "local" because
it is not universally supported, but we use it liberally in our test
scripts, which means some POSIX compliant shells (like "ksh93") can
not be used to run our tests.
Document the status quo, to help the next person who gets perplexed
seeing our tests fail.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation only mentions how to read cookies from the given file
and how to save them to the file using http.saveCookies.
But underlying libcURL allows the HTTP cookies used only in memory;
cookies from the server will be accepted and sent back in successive
requests within same connection, by using an empty string as the
filename. Document this.
Signed-off-by: Piotr Szlazak <piotr.szlazak@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When making a request over HTTP(S), Git only sends authentication if it
receives a 401 response. Thus, if a repository is open to the public
for reading, Git will typically never ask for authentication for fetches
and clones.
However, there may be times when a user would like to authenticate
nevertheless. For example, a forge may give higher rate limits to users
who authenticate because they are easier to contact in case of excessive
use. Or it may be useful for a known heavy user, such as an internal
service, to proactively authenticate so its use can be monitored and, if
necessary, throttled.
Let's make this possible with a new option, "http.proactiveAuth". This
option specifies a type of authentication which can be used to
authenticate against the host in question. This is necessary because we
lack the WWW-Authenticate header to provide us details; similarly, we
cannot accept certain types of authentication because we require
information from the server, such as a nonce or challenge, to
successfully authenticate.
If we're in auto mode and we got a username and password, set the
authentication scheme to Basic. libcurl will not send authentication
proactively unless there's a single choice of allowed authentication,
and we know in this case we didn't get an authtype entry telling us what
scheme to use, or we would have taken a different codepath and written
the header ourselves. In any event, of the other schemes that libcurl
supports, Digest and NTLM require a nonce or challenge, which means that
they cannot work with proactive auth, and GSSAPI does not use a username
and password at all, so Basic is the only logical choice among the
built-in options.
Note that the existing http_proactive_auth variable signifies proactive
auth if there are already credentials, which is different from the
functionality we're adding, which always seeks credentials even if none
are provided. Nonetheless, t5540 tests the existing behavior for
WebDAV-based pushes to an open repository without credentials, so we
preserve it. While at first this may seem an insecure and bizarre
decision, it may be that authentication is done with TLS certificates,
in which case it might actually provide a quite high level of security.
Expand the variable to use an enum to handle the additional cases and a
helper function to distinguish our new cases from the old ones.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already document in the FAQ that proxies must be completely
transparent and not modify the request or response in any way, but add
similar documentation to the http.proxy entry. We know that while the
FAQ is very useful, users sometimes are less likely to read in favor of
the documentation specific to an option or command, so adding it in both
places will help users be adequately informed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users very commonly want to sync their working tree with uncommitted
changes across machines, often to carry across in-progress work or
stashes. Despite this not being a recommended approach, users want to
do it and are not dissuaded by suggestions not to, so let's recommend a
sensible technique.
The technique that many users are using is their preferred cloud syncing
service, which is a bad idea. Users have reported problems where they
end up with duplicate files that won't go away (with names like "file.c
2"), broken references, oddly named references that have date stamps
appended to them, missing objects, and general corruption and data loss.
That's because almost all of these tools sync file by file, which is a
great technique if your project is a single word processing document or
spreadsheet, but is utterly abysmal for Git repositories because they
don't necessarily snapshot the entire repository correctly. They also
tend to sync the files immediately instead of when the repository is
quiescent, so writing multiple files, as occurs during a commit or a gc,
can confuse the tools and lead to corruption.
We know that the old standby, rsync, is up to the task, provided that
the repository is quiescent, so let's suggest that and dissuade people
from using cloud syncing tools. Let's tell people about common things
they should be aware of before doing this and that this is still
potentially risky. Additionally, let's tell people that Git's security
model does not permit sharing working trees across users in case they
planned to do that. While we'd still prefer users didn't try to do
this, hopefully this will lead them in a safer direction.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the FAQ, we tell people how to use the text attribute, but we fail to
explain what to do with the eol attribute. As we ourselves have
noticed, most shell implementations do not care for carriage returns,
and as such, people will practically always want them to use LF endings.
Similar things can be said for batch files on Windows, except with CRLF
endings.
Since these are common things to have in a repository, let's help users
make a good decision by recommending that they use the gitattributes
file to correctly check out the endings.
In addition, let's correct the cross-reference to this question, which
originally referred to "the following entry", even though a new entry
has been inserted in between. The cross-reference notation should
prevent this from occurring and provide a link in formats, such as HTML,
which support that.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many corporate environments and local systems have proxies in use. Note
the situations in which proxies can be used and how to configure them.
At the same time, note what standards a proxy must follow to work with
Git. Explicitly call out certain classes that are known to routinely
have problems reported various places online, including in the Git for
Windows issue tracker and on Stack Overflow, and recommend against the
use of such software, noting that they are associated with myriad
security problems (including, for example, breaking sandboxing and image
integrity[0], and, for TLS middleboxes, the use of insecure protocols
and ciphers and lack of certificate verification[1]). Don't mention the
specific nature of these security problems in the FAQ entry because they
are extremely numerous and varied and we wish to keep the FAQ entry
relatively brief.
[0] https://issues.chromium.org/issues/40285192
[1] https://faculty.cc.gatech.edu/~mbailey/publications/ndss17_interception.pdf
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Bloom filter used for path limited history traversal was broken
on systems whose "char" is unsigned; update the implementation and
bump the format version to 2.
* tb/path-filter-fix:
bloom: introduce `deinit_bloom_filters()`
commit-graph: reuse existing Bloom filters where possible
object.h: fix mis-aligned flag bits table
commit-graph: new Bloom filter version that fixes murmur3
commit-graph: unconditionally load Bloom filters
bloom: prepare to discard incompatible Bloom filters
bloom: annotate filters with hash version
repo-settings: introduce commitgraph.changedPathsVersion
t4216: test changed path filters with high bit paths
t/helper/test-read-graph: implement `bloom-filters` mode
bloom.h: make `load_bloom_filter_from_graph()` public
t/helper/test-read-graph.c: extract `dump_graph_info()`
gitformat-commit-graph: describe version 2 of BDAT
commit-graph: ensure Bloom filters are read with consistent settings
revision.c: consult Bloom filters for root commits
t/t4216-log-bloom.sh: harden `test_bloom_filters_not_used()`
"git archive --add-virtual-file=<path>:<contents>" never paid
attention to the --prefix=<prefix> option but the documentation
said it would. The documentation has been corrected.
* jc/archive-prefix-with-add-virtual-file:
archive: document that --add-virtual-file takes full path
Typically, forcing a sparse index to expand to a full index means that
Git could not determine the status of a file outside of the
sparse-checkout and needed to expand sparse trees into the full list of
sparse blobs. This operation can be very slow when the sparse-checkout
is much smaller than the full tree at HEAD.
When users are in this state, there is usually a modified or untracked
file outside of the sparse-checkout mentioned by the output of 'git
status'. There are a number of reasons why this is insufficient:
1. Users may not have a full understanding of which files are inside or
outside of their sparse-checkout. This is more common in monorepos
that manage the sparse-checkout using custom tools that map build
dependencies into sparse-checkout definitions.
2. In some cases, an empty directory could exist outside the
sparse-checkout and these empty directories are not reported by 'git
status' and friends.
3. If the user has '.gitignore' or 'exclude' files, then 'git status'
will squelch the warnings and not demonstrate any problems.
In order to help users who are in this state, add a new advice message
to indicate that a sparse index is expanded to a full index. This
message should be written at most once per process, so add a static
global 'give_advice_on_expansion' to sparse-index.c. Further, there is a
case in 'git sparse-checkout set' that uses the sparse index as an
in-memory data structure (even when writing a full index) so we need to
disable the message in that kind of case.
The t1092-sparse-checkout-compatibility.sh test script compares the
behavior of several Git commands across full and sparse repositories,
including sparse repositories with and without a sparse index. We need
to disable the advice in the sparse-index repo to avoid differences in
stderr. By leaving the advice on in the sparse-checkout repo (without
the sparse index), we can test the behavior of disabling the advice in
convert_to_sparse(). (Indeed, these tests are how that necessity was
discovered.) Add a test that reenables the advice and demonstrates that
the message is output.
The advice message is defined outside of expand_index() to avoid super-
wide lines. It is also defined as a macro to avoid compile issues with
-Werror=format-security.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The number to be displayed is calculated by the following defined in
object.h:
#define REV_SHIFT 2
#define MAX_REVS (FLAG_BITS - REV_SHIFT)
FLAG_BITS is currently 28, so 26 is the correct number.
Signed-off-by: Rikita Ishikawa <lagrange.resolvent@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Memory ownership rules for the in-core representation of
remote.*.url configuration values have been straightened out, which
resulted in a few leak fixes and code clarification.
* jk/remote-wo-url:
remote: drop checks for zero-url case
remote: always require at least one url in a remote
t5801: test remote.*.vcs config
t5801: make remote-testgit GIT_DIR setup more robust
remote: allow resetting url list
config: document remote.*.url/pushurl interaction
remote: simplify url/pushurl selection
remote: use strvecs to store remote url/pushurl
remote: transfer ownership of memory in add_url(), etc
remote: refactor alias_url() memory ownership
archive: fix check for missing url
Earlier we stopped using the tree of HEAD as the default source of
attributes in a bare repository, but failed to document it. This
has been corrected.
* jc/no-default-attr-tree-in-bare:
attr.tree: HEAD:.gitattributes is no longer the default in a bare repo
When the user adds to "git rebase -i" instruction to "pick" a merge
commit, the error experience is not pleasant. Such an error is now
caught earlier in the process that parses the todo list.
* pw/rebase-i-error-message:
rebase -i: improve error message when picking merge
rebase -i: pass struct replay_opts to parse_insn_line()
The safe.directory configuration knob has been updated to
optionally allow leading path matches.
* jc/safe-directory-leading-path:
safe.directory: allow "lead/ing/path/*" match
The documentation for "git diff --name-only" has been clarified
that it is about showing the names in the post-image tree.
* jc/doc-diff-name-only:
diff: document what --name-only shows
A scheduled "git maintenance" job is expected to work on all
repositories it knows about, but it stopped at the first one that
errored out. Now it keeps going.
* js/for-each-repo-keep-going:
maintenance: running maintenance should not stop on errors
for-each-repo: optionally keep going on an error
Tom Scogland noticed that `--add-virtual-file` option uses the path
specified as its value as-is, without prepending any value given to
the `--prefix` option like `--add-file` does.
The behaviour has always been that way since the option was
introduced, but the documentation has always been wrong and said
that it would use the value of `--prefix` just like `--add-file`
does.
We could modify the behaviour to make it literally work like the
documentation said, but it would break existing scripts the users
use.
Noticed-by: Tom Scogland <scogland1@llnl.gov>
Acked-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The murmur3 implementation in bloom.c has a bug when converting series
of 4 bytes into network-order integers when char is signed (which is
controllable by a compiler option, and the default signedness of char is
platform-specific). When a string contains characters with the high bit
set, this bug causes results that, although internally consistent within
Git, does not accord with other implementations of murmur3 (thus,
the changed path filters wouldn't be readable by other off-the-shelf
implementatios of murmur3) and even with Git binaries that were compiled
with different signedness of char. This bug affects both how Git writes
changed path filters to disk and how Git interprets changed path filters
on disk.
Therefore, introduce a new version (2) of changed path filters that
corrects this problem. The existing version (1) is still supported and
is still the default, but users should migrate away from it as soon
as possible.
Because this bug only manifests with characters that have the high bit
set, it may be possible that some (or all) commits in a given repo would
have the same changed path filter both before and after this fix is
applied. However, in order to determine whether this is the case, the
changed paths would first have to be computed, at which point it is not
much more expensive to just compute a new changed path filter.
So this patch does not include any mechanism to "salvage" changed path
filters from repositories. There is also no "mixed" mode - for each
invocation of Git, reading and writing changed path filters are done
with the same version number; this version number may be explicitly
stated (typically if the user knows which version they need) or
automatically determined from the version of the existing changed path
filters in the repository.
There is a change in write_commit_graph(). graph_read_bloom_data()
makes it possible for chunk_bloom_data to be non-NULL but
bloom_filter_settings to be NULL, which causes a segfault later on. I
produced such a segfault while developing this patch, but couldn't find
a way to reproduce it neither after this complete patch (or before),
but in any case it seemed like a good thing to include that might help
future patch authors.
The value in t0095 was obtained from another murmur3 implementation
using the following Go source code:
package main
import "fmt"
import "github.com/spaolacci/murmur3"
func main() {
fmt.Printf("%x\n", murmur3.Sum32([]byte("Hello world!")))
fmt.Printf("%x\n", murmur3.Sum32([]byte{0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff}))
}
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent commit will introduce another version of the changed-path
filter in the commit graph file. In order to control which version to
write (and read), a config variable is needed.
Therefore, introduce this config variable. For forwards compatibility,
teach Git to not read commit graphs when the config variable
is set to an unsupported version. Because we teach Git this,
commitgraph.readChangedPaths is now redundant, so deprecate it and
define its behavior in terms of the config variable we introduce.
This commit does not change the behavior of writing (Git writes changed
path filters when explicitly instructed regardless of any config
variable), but a subsequent commit will restrict Git such that it will
only write when commitgraph.changedPathsVersion is a recognized value.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code change to Git to support version 2 will be done in subsequent
commits.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For over a year, setting add.interactive.useBuiltin configuration
variable did nothing but giving a "this does not do anything"
warning. Finally remove it.
* jc/add-i-retire-usebuiltin-config:
add-i: finally retire add.interactive.useBuiltin
Earlier we stopped using the tree of HEAD as the default source of
attributes in a bare repository, but failed to document it. This
has been corrected.
* jc/no-default-attr-tree-in-bare:
attr.tree: HEAD:.gitattributes is no longer the default in a bare repo
The pseudo-merge reachability bitmap to help more efficient storage
of the reachability bitmap in a repository with too many refs has
been added.
* tb/pseudo-merge-reachability-bitmap: (26 commits)
pack-bitmap.c: ensure pseudo-merge offset reads are bounded
Documentation/technical/bitmap-format.txt: add missing position table
t/perf: implement performance tests for pseudo-merge bitmaps
pseudo-merge: implement support for finding existing merges
ewah: `bitmap_equals_ewah()`
pack-bitmap: extra trace2 information
pack-bitmap.c: use pseudo-merges during traversal
t/test-lib-functions.sh: support `--notick` in `test_commit_bulk()`
pack-bitmap: implement test helpers for pseudo-merge
ewah: implement `ewah_bitmap_popcount()`
pseudo-merge: implement support for reading pseudo-merge commits
pack-bitmap.c: read pseudo-merge extension
pseudo-merge: scaffolding for reads
pack-bitmap: extract `read_bitmap()` function
pack-bitmap-write.c: write pseudo-merge table
pseudo-merge: implement support for selecting pseudo-merge commits
config: introduce `git_config_double()`
pack-bitmap: make `bitmap_writer_push_bitmapped_commit()` public
pack-bitmap: implement `bitmap_writer_has_bitmapped_object_id()`
pack-bitmap-write: support storing pseudo-merge commits
...
The "--heads" option of "ls-remote" and "show-ref" has been been
deprecated; "--branches" replaces "--heads".
* jc/heads-are-branches:
show-ref: introduce --branches and deprecate --heads
ls-remote: introduce --branches and deprecate --heads
refs: call branches branches
The structure of the document that records longer-term project
decisions to deprecate/remove/update various behaviour has been
outlined.
* ps/document-breaking-changes:
BreakingChanges: document that we do not plan to deprecate git-checkout
BreakingChanges: document removal of grafting
BreakingChanges: document upcoming change from "sha1" to "sha256"
docs: introduce document to announce breaking changes
When the user adds to "git rebase -i" instruction to "pick" a merge
commit, the error experience is not pleasant. Such an error is now
caught earlier in the process that parses the todo list.
* pw/rebase-i-error-message:
rebase -i: improve error message when picking merge
rebase -i: pass struct replay_opts to parse_insn_line()
"git update-ref --stdin" learned to handle transactional updates of
symbolic-refs.
* kn/update-ref-symref:
update-ref: add support for 'symref-update' command
reftable: pick either 'oid' or 'target' for new updates
update-ref: add support for 'symref-create' command
update-ref: add support for 'symref-delete' command
update-ref: add support for 'symref-verify' command
refs: specify error for regular refs with `old_target`
refs: create and use `ref_update_expects_existing_old_ref()`
"git diff --exit-code --ext-diff" learned to take the exit status
of the external diff driver into account when deciding the exit
status of the overall "git diff" invocation when configured to do
so.
* rs/diff-exit-code-with-external-diff:
diff: let external diffs report that changes are uninteresting
userdiff: add and use struct external_diff
t4020: test exit code with external diffs
"git am" has a safety feature to prevent it from starting a new
session when there already is a session going. It reliably
triggers when a mbox is given on the command line, but it has to
rely on the tty-ness of the standard input. Add an explicit way to
opt out of this safety with a command line option.
* jk/am-retry:
test-terminal: drop stdin handling
am: add explicit "--retry" option
A new command has been added to migrate a repository that uses the
files backend for its ref storage to use the reftable backend, with
limitations.
* ps/ref-storage-migration:
builtin/refs: new command to migrate ref storage formats
refs: implement logic to migrate between ref storage formats
refs: implement removal of ref storages
worktree: don't store main worktree twice
reftable: inline `merged_table_release()`
refs/files: fix NULL pointer deref when releasing ref store
refs/files: extract function to iterate through root refs
refs/files: refactor `add_pseudoref_and_head_entries()`
refs: allow to skip creation of reflog entries
refs: pass storage format to `ref_store_init()` explicitly
refs: convert ref storage format to an enum
setup: unset ref storage when reinitializing repository version
"make check-docs" noticed problems and reported to its output but
failed to signal its findings with its exit status, which has been
corrected.
* ps/check-docs-fix:
ci/test-documentation: work around SyntaxWarning in Python 3.12
gitlab-ci: add job to run `make check-docs`
Documentation/lint-manpages: bubble up errors
Makefile: extract script to lint missing/extraneous manpages
While investigating a benign Coverity warning on the new pseudo-merge
implementation, I was struggling to understand the (paraphrased) below:
ofs = index_end - 24 - (index->pseudo_merges.nr * sizeof(uint64_t));
for (i = 0; i < index->pseudo_merges.nr; i++) {
index->pseudo_merges.v[i].at = get_be64(ofs);
ofs += sizeof(uint64_t);
}
, in pack-bitmap.c::load_bitmap_header(). Looking at the documentation,
the diagram describing the on-disk format (prior to this patch)
suggested that the optional extended lookup table immediately preceded
the trailing metadata portion.
If that were the case, that would make the above code from
load_bitmap_header() incorrect, as we'd be blindly reading into the
extended offset table.
But later on in the documentation there is a description of the
pseudo-merge position table as immediately preceding the trailing
metadata portion of the extension. And indeed, we do write the position
table in pack-bitmap-write.c:
/* write positions for all pseudo merges */
for (i = 0; i < writer->pseudo_merges_nr; i++)
hashwrite_be64(f, pseudo_merge_ofs[i]);
hashwrite_be32(f, writer->pseudo_merges_nr);
hashwrite_be32(f, kh_size(writer->pseudo_merge_commits));
hashwrite_be64(f, table_start - start);
hashwrite_be64(f, hashfile_total(f) - start + sizeof(uint64_t));
So this is purely a case of the diagram being out of sync with the
textual description and actual implementation of the format
specification.
Add the missing component back to the format diagram to avoid further
confusion in this area.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because remote.*.url is treated as a multi-valued key, there is no way
to override previous config. So for example if you have
remote.origin.url set to some wrong value, doing:
git -c remote.origin.url=right fetch
would not work. It would append "right" to the list, which means we'd
still fetch from "wrong" (since subsequent values are used only as push
urls).
Let's provide a mechanism to reset the list, like we do for other
multi-valued keys (e.g., credential.helper, http.extraheaders, and
merge.suppressDest all use this "empty string means reset" pattern).
Reported-by: Mathew George <mathewegeorge@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for these keys gives a very terse definition and
points you to the fetch/push manpages. But from reading those pages it
was not at all obvious to me that:
- these are keys that can be defined multiple times with meaningful
behavior (especially remote.*.url)
- the way that pushurl overrides url (the git-push page does mention
that "pushurl defaults to url", but it is not immediately clear what
a multi-valued url would do in that situation).
Let's try to summarize the current behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-checkout(1) command is seen by many as hard to understand
because it connects two somewhat unrelated features: switching between
branches and restoring worktree files from arbitrary revisions. In 2019,
we thus implemented two new commands git-switch(1) and git-restore(1) to
split out these separate concerns into standalone functions.
This "replacement" of git-checkout(1) has repeatedly triggered concerns
for our userbase that git-checkout(1) will eventually go away. This is
not the case though: the use of that command is still widespread, and it
is not expected that this will change anytime soon.
Document that all three commands will remain for the foreseeable future.
This decision may be revisited in case we ever figure out that most
everyone has given up on any of the commands.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grafting mechanism for objects has been deprecated in e650d0643b
(docs: mark info/grafts as outdated, 2014-03-05), which is more than a
decade ago. The mechanism can lead to hard-to-debug issues and has a
superior replacement with replace refs.
Follow through with the deprecation and mark grafts for removal in Git
3.0.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with 8e42eb0e9a (doc: sha256 is no longer experimental,
2023-07-31), the "sha256" object format is no longer considered to be
experimental. Furthermore, the SHA-1 hash function is actively
recommended against by for example NIST and FIPS 140-2, and attacks
against it are becoming more practical both due to new weaknesses
(SHAppening, SHAttered, Shambles) and due to the ever-increasing
computing power. It is only a matter of time before it can be considered
to be broken completely.
Let's plan for this event by being active instead of waiting for it to
happend and announce that the default object format is going to change
from "sha1" to "sha256" with Git 3.0.
All major Git implementations (libgit2, JGit, go-git) support the
"sha256" object format and are thus prepared for this change. The most
important missing piece in the puzzle is support in forges. But while
GitLab recently gained experimental support for the "sha256" object
format though, to the best of my knowledge GitHub doesn't support it
yet. Ideally, announcing this upcoming change will encourage forges to
start building that support.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over time, Git has grown quite a lot. With this evolution, many ideas
that were sensible at the time they were introduced are not anymore and
are thus considered to be deprecated. And while some deprecations may be
noted in manpages, most of them are actually deprecated in the "hive
mind" of the Git community, only.
Introduce a new document that tracks such breaking changes, but also
deprecations which we are not willing to go through with, to address
this issue. This document serves multiple purposes:
- It is a way to facilitate discussion around proposed deprecations.
- It allows users to learn about deprecations and speak up in case
they have good reasons why a certain feature should not be
deprecated.
- It states intent and documents where the Git project wants to go,
both in the case where we want to deprecate, but also in the case
where we don't want to deprecate a specific feature.
The document is _not_ intended to cast every single discussion into
stone. It is supposed to be a living document that may change over time
when there are good reasons for it to change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The safe.directory configuration knob has been updated to
optionally allow leading path matches.
* jc/safe-directory-leading-path:
safe.directory: allow "lead/ing/path/*" match
The alias-expanded command lines are logged to the trace output.
* iw/trace-argv-on-alias:
run-command: show prepared command
Documentation: alias: add notes on shell expansion
Documentation: alias: rework notes into points
The options --exit-code and --quiet instruct git diff to indicate
whether it found any significant changes by exiting with code 1 if it
did and 0 if there were none. Currently this doesn't work if external
diff programs are involved, as we have no way to learn what they found.
Add that ability in the form of the new configuration options
diff.trustExitCode and diff.<driver>.trustExitCode and the environment
variable GIT_EXTERNAL_DIFF_TRUST_EXIT_CODE. They pair with the config
options diff.external and diff.<driver>.command and the environment
variable GIT_EXTERNAL_DIFF, respectively.
The new options are off by default, keeping the old behavior. Enabling
them indicates that the external diff returns exit code 1 if it finds
significant changes and 0 if it doesn't, like diff(1).
The name of the new options is taken from the git difftool and mergetool
options of similar purpose. (There they enable passing on the exit code
of a diff tool and to infer whether a merge done by a merge tool is
successful.)
The new feature sets the diff flag diff_from_contents in
diff_setup_done() if we need the exit code and are allowed to call
external diffs. This disables the optimization that avoids calling the
program with --quiet. Add it back by skipping the call if the external
diff is not able to report empty diffs. We can only do that check after
evaluating the file-specific attributes in run_external_diff().
If we do run the external diff with --quiet, send its output to
/dev/null.
I considered checking the output of the external diff to check whether
its empty. It was added as 11be65cfa4 (diff: fix --exit-code with
external diff, 2024-05-05) and quickly reverted, as it does not work
with external diffs that do not write to stdout. There's no reason why
a graphical diff tool would even need to write anything there at all.
I also considered using a non-zero exit code for empty diffs, which
could be done without adding new configuration options. We'd need to
disable the optimization that allows git diff --quiet to skip calling
external diffs, though -- that might be quite surprising if graphical
diff programs are involved. And assigning the opposite meaning of the
exit codes compared to diff(1) and git diff --exit-code to the external
diff can cause unnecessary confusion.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to check the exit code of git diff with its options --quiet
and --exit-code when using an external diff program. Currently we
cannot tell whether it found significant changes or not.
While at it, document briefly that --quiet turns off execution of
external diff programs because that behavior surprised me for a moment
while writing the tests.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that the interactive.singleKey configuration option is
disabled by default, using rather subtle wording that avoids an
emphasis on the actual default value. This should eliminate any
associated doubts.
While there, touch up the remaining wording of the description a bit.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'symref-update' command to the '--stdin' mode of 'git-update-ref' to
allow updates of symbolic refs. The 'symref-update' command takes in a
<new-target>, which the <ref> will be updated to. If the <ref> doesn't
exist it will be created.
It also optionally takes either an `ref <old-target>` or `oid
<old-oid>`. If the <old-target> is provided, it checks to see if the
<ref> targets the <old-target> before the update. If <old-oid> is provided
it checks <ref> to ensure that it is a regular ref and <old-oid> is the
OID before the update. This by extension also means that this when a
zero <old-oid> is provided, it ensures that the ref didn't exist before.
The divergence in syntax from the regular `update` command is because if
we don't use a `(ref | oid)` prefix for the old_value, then there is
ambiguity around if the value provided should be treated as an oid or a
reference. This is more so the reason, because we allow anything
committish to be provided as an oid. While 'symref-verify' and
'symref-delete' also take in `<old-target>` we do not have this
divergence there as those commands only work with symrefs. Whereas
'symref-update' also works with regular refs and allows users to convert
regular refs to symrefs.
The command allows users to perform symbolic ref updates within a
transaction. This provides atomicity and allows users to perform a set
of operations together.
This command supports deref mode, to ensure that we can update
dereferenced regular refs to symrefs.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'symref-create' command to the '--stdin' mode 'git-update-ref' to
allow creation of symbolic refs in a transaction. The 'symref-create'
command takes in a <new-target>, which the created <ref> will point to.
Also, support the 'core.prefersymlinkrefs' config, wherein if the config
is set and the filesystem supports symlinks, we create the symbolic ref
as a symlink. We fallback to creating a regular symref if creating the
symlink is unsuccessful.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new command 'symref-delete' to allow deletions of symbolic refs in
a transaction via the '--stdin' mode of the 'git-update-ref' command.
The 'symref-delete' command can, when given an <old-target>, delete the
provided <ref> only when it points to <old-target>.
This command is only compatible with the 'no-deref' mode because we
optionally want to check the 'old_target' of the ref being deleted.
De-referencing a symbolic ref would provide a regular ref and we already
have the 'delete' command for regular refs.
While users can also use 'git symbolic-ref -d' to delete symbolic refs,
the 'symref-delete' command in 'git-update-ref' allows users to do so
within a transaction, which promises atomicity of the operation and can
be batched with other commands.
When no 'old_target' is provided it can also delete regular refs,
similar to how the 'delete' command can delete symrefs when no 'old_oid'
is provided.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'symref-verify' command allows users to verify if a provided <ref>
contains the provided <old-target> without changing the <ref>. If
<old-target> is not provided, the command will verify that the <ref>
doesn't exist.
The command allows users to verify symbolic refs within a transaction,
and this means users can perform a set of changes in a transaction only
when the verification holds good.
Since we're checking for symbolic refs, this command will only work with
the 'no-deref' mode. This is because any dereferenced symbolic ref will
point to an object and not a ref and the regular 'verify' command can be
used in such situations.
Add required tests for symref support in 'verify'. Since we're here,
also add reflog checks for the pre-existing 'verify' tests, there is no
divergence from behavior, but we never tested to ensure that reflog
wasn't affected by the 'verify' command.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The promisor.quiet configuration knob can be set to true to make
lazy fetching from promisor remotes silent.
* th/quiet-lazy-fetch-from-promisor:
promisor-remote: add promisor.quiet configuration option
After a patch fails, you can ask "git am" to try applying it again with
new options by running without any of the resume options. E.g.:
git am <patch
# oops, it failed; let's try again
git am --3way
But since this second command has no explicit resume option (like
"--continue"), it looks just like an invocation to read a fresh patch
from stdin. To avoid confusing the two cases, there are some heuristics,
courtesy of 8d18550318 (builtin-am: reject patches when there's a
session in progress, 2015-08-04):
if (in_progress) {
/*
* Catch user error to feed us patches when there is a session
* in progress:
*
* 1. mbox path(s) are provided on the command-line.
* 2. stdin is not a tty: the user is trying to feed us a patch
* from standard input. This is somewhat unreliable -- stdin
* could be /dev/null for example and the caller did not
* intend to feed us a patch but wanted to continue
* unattended.
*/
if (argc || (resume_mode == RESUME_FALSE && !isatty(0)))
die(_("previous rebase directory %s still exists but mbox given."),
state.dir);
if (resume_mode == RESUME_FALSE)
resume_mode = RESUME_APPLY;
[...]
So if no resume command is given, then we require that stdin be a tty,
and otherwise complain about (potentially) receiving an mbox on stdin.
But of course you might not actually have a terminal available! And
sadly there is no explicit way to hit this same code path; this is the
only place that sets RESUME_APPLY. So you're stuck, and scripts like our
test suite have to bend over backwards to create a pseudo-tty.
Let's provide an explicit option to trigger this mode. The code turns
out to be quite simple; just setting "resume_mode" to RESUME_FALSE is
enough to dodge the tty check, and then our state is the same as it
would be with the heuristic case (which we'll continue to allow).
When we don't have a session in progress, there's already code to
complain when resume_mode is set (but we'll add a new test to cover
that).
To test the new option, we'll convert the existing tests that rely on
the fake stdin tty. That lets us test them on more platforms, and will
let us simplify test_terminal a bit in a future patch.
It does, however, mean we're not testing the tty heuristic at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new command that allows the user to migrate a repository
between ref storage formats. This new command is implemented as part of
a new git-refs(1) executable. This is due to two reasons:
- There is no good place to put the migration logic in existing
commands. git-maintenance(1) felt unwieldy, and git-pack-refs(1) is
not the correct place to put it, either.
- I had it in my mind to create a new low-level command for accessing
refs for quite a while already. git-refs(1) is that command and can
over time grow more functionality relating to refs. This should help
discoverability by consolidating low-level access to refs into a
single executable.
As mentioned in the preceding commit that introduces the ref storage
format migration logic, the new `git refs migrate` command still has a
bunch of restrictions. These restrictions are documented accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "lint-manpages.sh" script does not return an error in case any of
its checks fail. While this is faithful to the implementation that we
had as part of the "check-docs" target before the preceding commit, it
makes it hard to spot any violations of the rules via the corresponding
CI job, which will of course exit successfully, too.
Adapt the script to bubble up errors.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "check-docs" target of our top-level Makefile fulfills two different
roles. For one it runs the "lint-docs" target of the "Documentation/"
Makefile. And second it performs some checks of whether there are any
manpages that are missing or extraneous via some inline scripts.
The second set of checks feels quite misplaced in the top-level Makefile
as it would fit in much better with our "lint-docs" target. Back when
the checks were introduced in 8c989ec528 (Makefile: $(MAKE) check-docs,
2006-04-13), that target did not yet exist though.
Furthermore, the script makes use of several Makefile variables which
are defined in the top-level Makefile, which makes it hard to access
their contents from elsewhere. There is a trick though that we already
use in "check-builtins.sh" to gain access: we can create an ad-hoc
Makefile that has an extra target to print those variables.
Pull out the script into a separate "lint-manpages.sh" script by using
that trick. Wire up that script via the "lint-docs" target. For one,
normal shell scripts are way easier to reason about than those which are
embedded in a Makefile. Second, it allows one to easily execute the
script standalone without any of the other checks.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration variable stopped doing anything (other than
announcing itself as a variable that does not do anything useful,
when it is used) in Git 2.40.
At this point, it is not even worth giving the warning, which was
meant to be a way to help users notice they are carrying unused
cruft in their configuration files and give them a chance to
clean-up.
Let's remove the warning and documentation for it, and truly stop
paying attention to it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Documentation/config/add.txt | 6 ------
builtin/add.c | 6 +-----
t/t3701-add-interactive.sh | 15 ---------------
3 files changed, 1 insertion(+), 26 deletions(-)
51441e64 (stop using HEAD for attributes in bare repository by
default, 2024-05-03) has addressed a recent performance regression
by partially reverting a topic that was merged at 26dd307c (Merge
branch 'jc/attr-tree-config', 2023-10-30). But it forgot to update
the documentation to remove the mention of a special case in bare
repositories.
Let's update the document before the update hits the next release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call the tips of branches "heads", but this command calls the
option to show only branches "--heads", which confuses the branches
themselves and the tips of branches.
Straighten the terminology by introducing "--branches" option that
limits the output to branches, and deprecate "--heads" option used
that way.
We do not plan to remove "--heads" or "-h" yet; we may want to do so
at Git 3.0, in which case, we may need to start advertising upcoming
removal with an extra warning when they are used.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call the tips of branches "heads", but this command calls the
option to show only branches "--heads", which confuses the branches
themselves and the tips of branches.
Straighten the terminology by introducing "--branches" option that
limits the output to branches, and deprecate "--heads" option used
that way.
We do not plan to remove "--heads" or "-h" yet; we may want to do so
at Git 3.0, in which case, we may need to start advertising upcoming
removal with an extra warning when they are used.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing inline shell for shell-expansion aliases (i.e. prefixed
with "!"), there are some caveats around argument parsing to be aware
of. This series of notes attempts to explain what is happening more
clearly.
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SubmittingPatches document now refers folks to manpages
translation project.
* jc/doc-manpages-l10n:
SubmittingPatches: advertise git-manpages-l10n project a bit
Adjust jc/fix-2.45.1-and-friends-for-2.39 for more recent
maintenance track.
* jc/fix-2.45.1-and-friends-for-maint:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
The knobs to tweak how reftable files are written have been made
available as configuration variables.
* ps/reftable-write-options:
refs/reftable: allow configuring geometric factor
reftable: make the compaction factor configurable
refs/reftable: allow disabling writing the object index
refs/reftable: allow configuring restart interval
reftable: use `uint16_t` to track restart interval
refs/reftable: allow configuring block size
reftable/dump: support dumping a table's block structure
reftable/writer: improve error when passed an invalid block size
reftable/writer: drop static variable used to initialize strbuf
reftable: pass opts as constant pointer
reftable: consistently refer to `reftable_write_options` as `opts`
The only todo commands that accept a merge commit are "merge" and
"reset". All the other commands like "pick" or "reword" fail when they
try to pick a a merge commit and print the message
error: commit abc123 is a merge but no -m option was given.
followed by a hint about the command being rescheduled. This message is
designed to help the user when they cherry-pick a merge and forget to
pass "-m". For users who are rebasing the message is confusing as there
is no way for rebase to cherry-pick the merge.
Improve the user experience by detecting the error and printing some
advice on how to fix it when the todo list is parsed rather than waiting
for the "pick" command to fail. The advice recommends "merge" rather
than "exec git cherry-pick -m ..." on the assumption that cherry-picking
merges is relatively rare and it is more likely that the user chose
"pick" by a mistake.
It would be possible to support cherry-picking merges by allowing the
user to pass "-m" to "pick" commands but that adds complexity to do
something that can already be achieved with
exec git cherry-pick -m1 abc123
Reported-by: Stefan Haller <lists@haller-berlin.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When safe.directory was introduced in v2.30.3 timeframe, 8959555c
(setup_git_directory(): add an owner check for the top-level
directory, 2022-03-02), it only allowed specific opt-out
directories. Immediately after an embargoed release that included
the change, 0f85c4a3 (setup: opt-out of check with safe.directory=*,
2022-04-13) was done as a response to loosen the check so that a
single '*' can be used to say "I trust all repositories" for folks
who host too many repositories to list individually.
Let's further loosen the check to allow people to say "everything
under this hierarchy is deemed safe" by specifying such a leading
directory with "/*" appended to it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default "creation-factor" used by "git format-patch" has been
raised to make it more aggressively find matching commits.
* jc/format-patch-more-aggressive-range-diff:
format-patch: run range-diff with larger creation-factor
The documentation for "git diff --name-only" has been clarified
that it is about showing the names in the post-image tree.
* jc/doc-diff-name-only:
diff: document what --name-only shows
Terminology to call various ref-like things are getting
straightened out.
* ps/pseudo-ref-terminology:
refs: refuse to write pseudorefs
ref-filter: properly distinuish pseudo and root refs
refs: pseudorefs are no refs
refs: classify HEAD as a root ref
refs: do not check ref existence in `is_root_ref()`
refs: rename `is_special_ref()` to `is_pseudo_ref()`
refs: rename `is_pseudoref()` to `is_root_ref()`
Documentation/glossary: define root refs as refs
Documentation/glossary: clarify limitations of pseudorefs
Documentation/glossary: redefine pseudorefs as special refs
The SubmittingPatches document now refers folks to manpages
translation project.
* jc/doc-manpages-l10n:
SubmittingPatches: advertise git-manpages-l10n project a bit
There are a number of caveats when using aliases. Rather than
stuffing them all together in a paragraph, let's separate them out
into individual points to make it clearer what's going on.
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration option to allow output from the promisor
fetching objects to be suppressed.
This allows us to stop commands like 'git blame' being swamped
with progress messages and gc notifications from the promisor
when used in a partial clone.
Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fixes/2.45.1/2.44:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
* fixes/2.45.1/2.43:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
* fixes/2.45.1/2.42:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
* fixes/2.45.1/2.41:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
* fixes/2.45.1/2.40:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
Revert overly aggressive "layered defence" that went into 2.45.1
and friends, which broke "git-lfs", "git-annex", and other use
cases, so that we can rebuild necessary counterparts in the open.
* jc/fix-2.45.1-and-friends-for-2.39:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
Teach the new pseudo-merge machinery how to select non-bitmapped commits
for inclusion in different pseudo-merge group(s) based on a handful of
criteria.
Note that the selected pseudo-merge commits aren't actually used or
written anywhere yet. This will be done in the following commit.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare to implement pseudo-merge bitmaps over the next several commits
by first describing the serialization format which will store the new
pseudo-merge bitmaps themselves.
This format is implemented as an optional extension within the bitmap v1
format, making it compatible with previous versions of Git, as well as
the original .bitmap implementation within JGit.
The format is described in detail in the patch contents below, but the
high-level description is as follows:
- An array of pseudo-merge bitmaps, each containing a pair of EWAH
bitmaps: one describing the set of pseudo-merge "parents", and
another describing the set of object(s) reachable from those
parents.
- A lookup table to determine which pseudo-merge(s) a given commit
appears in. An optional extended lookup table follows when there is
at least one commit which appears in multiple pseudo-merge groups.
- Trailing metadata, including the number of pseudo-merge(s), number
of unique parents, the offset within the .bitmap file for the
pseudo-merge commit lookup table, and the size of the optional
extension itself.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some details to the gitpacking(7) manual page which motivate and
describe pseudo-merge bitmaps.
The exact on-disk format and many of the configuration knobs will be
described in subsequent commits.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new manual page, gitpacking(7) to collect useful information
about advanced packing concepts in Git.
In future commits in this series, this manual page will expand to
describe the new pseudo-merge bitmaps feature, as well as include
examples, relevant configuration bits, use-cases, and so on.
Outside of this series, this manual page may absorb similar pieces from
other parts of Git's documentation about packing.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kn/ref-transaction-symref:
refs: remove `create_symref` and associated dead code
refs: rename `refs_create_symref()` to `refs_update_symref()`
refs: use transaction in `refs_create_symref()`
refs: add support for transactional symref updates
refs: move `original_update_refname` to 'refs.c'
refs: support symrefs in 'reference-transaction' hook
files-backend: extract out `create_symref_lock()`
refs: accept symref values in `ref_transaction_update()`
* ps/pseudo-ref-terminology:
refs: refuse to write pseudorefs
ref-filter: properly distinuish pseudo and root refs
refs: pseudorefs are no refs
refs: classify HEAD as a root ref
refs: do not check ref existence in `is_root_ref()`
refs: rename `is_special_ref()` to `is_pseudo_ref()`
refs: rename `is_pseudoref()` to `is_root_ref()`
Documentation/glossary: define root refs as refs
Documentation/glossary: clarify limitations of pseudorefs
Documentation/glossary: redefine pseudorefs as special refs
This reverts commit a33fea08 (fsck: warn about symlink pointing
inside a gitdir, 2024-04-10), which warns against symbolic links
commonly created by git-annex.
Updates to symbolic refs can now be made as a part of ref
transaction.
* kn/ref-transaction-symref:
refs: remove `create_symref` and associated dead code
refs: rename `refs_create_symref()` to `refs_update_symref()`
refs: use transaction in `refs_create_symref()`
refs: add support for transactional symref updates
refs: move `original_update_refname` to 'refs.c'
refs: support symrefs in 'reference-transaction' hook
files-backend: extract out `create_symref_lock()`
refs: accept symref values in `ref_transaction_update()`
The Git project currently operates according to an informal
consensus-building process, which is currently described in the
SubmittingPatches document. However, that focuses on small/medium-scale
patch series. For larger-scale decisions, the process is not as well
described. Document what to expect so that we have something concrete to
help inform newcomers to the project.
This document explicitly does not aim to impose a formal process to
decision-making, nor to change pre-existing norms. Its only aim is to
describe how the project currently operates today.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--name-only" option is about showing the name of each file in
the post-image tree that got changed and nothing else (like "was it
created?"). Unlike the "--name-status" option that tells how the
change happened (e.g., renamed with similarity), it does not give
anything else, like the name of the corresponding file in the old
tree.
For example, if you start from a clean checkout that has a file
whose name is COPYING, here is what you would see:
$ git mv COPYING RENAMING
$ git diff -M --name-only HEAD
RENAMING
$ git diff -M --name-status HEAD
R100 COPYING RENAMING
Lack of the description of this fact has confused readers in the
past. Even back when dda2d79a ([PATCH] Clean up diff option
descriptions., 2005-07-13) documented "--name-only", "git diff"
already supported the renames, so in a sense, from day one, this
should have been documented more clearly but it wasn't.
Belatedly clarify it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The project takes our AsciiDoc sources of documentation and actively
maintains the translations to various languages.
Let's give them enhanced visibility to help those who want to
volunteer find them.
Acked-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano