kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Daniel Barkalow	1d0a694b8a	Fix t3200 config "git-config name = value" doesn't do anything most of the time. The test meant "git-config name value", but that leaves the configuration such that later tests will be confused, so move it to the end. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Jay Soffian	9ed36cfa35	branch: optionally setup branch..merge from upstream local branches "git branch" and "git checkout -b" now honor --track option even when the upstream branch is local. Previously --track was silently ignored when forking from a local branch. Also the command did not error out when --track was explicitly asked for but the forked point specified was not an existing branch (i.e. when there is no way to set up the tracking configuration), but now it correctly does. The configuration setting branch.autosetupmerge can now be set to "always", which is equivalent to using --track from the command line. Setting branch.autosetupmerge to "true" will retain the former behavior of only setting up branch..merge for remote upstream branches. Includes test cases for the new functionality. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	41ac414ea2	Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test should succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Johannes Schindelin	6f084a56fc	branch --track: code cleanup and saner handling of local branches This patch cleans up some complicated code, and replaces it with a cleaner version, using code from remote.[ch], which got extended a little in the process. This also enables us to fix two cases: The earlier "fix" to setup tracking only when the original ref started with "refs/remotes" is wrong. You are absolutely allowed to use a separate layout for your tracking branches. The correct fix, of course, is to set up tracking information only when there is a matching remote.<nick>.fetch line containing a colon. Another corner case was not handled properly. If two remotes write to the original ref, just warn the user and do not set up tracking. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Johannes Schindelin	4017761fd8	branch.autosetupmerge: allow boolean values, or "all" Junio noticed that switching on autosetupmerge unilaterally started cluttering the config for local branches. That is not the original intention of branch.autosetupmerge, which was meant purely for convenience when branching off of remote branches, but that semantics got lost somewhere. If you still want that "new" behavior, you can switch branch.autosetupmerge to the value "all". Otherwise, it is interpreted as a boolean, which triggers setting up defaults _only_ when branching off of a remote branch, i.e. the originally intended behavior. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Junio C Hamano	5be60078c9	Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Junio C Hamano	7b99befef7	git-branch --track: fix tracking branch computation. The original code did not take hierarchical branch names into account at all. [jc: cherry-picked `11f68d9` from 'master'] Tested-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Gerrit Pape	f1eccbab63	git-branch: cleanup config file when deleting branches When deleting branches, remove the sections referring to these branches from the config file. Signed-off-by: Gerrit Pape <pape@smarden.org>	18 years ago
Junio C Hamano	11f68d9082	git-branch --track: fix tracking branch computation. The original code did not take hierarchical branch names into account at all. Tested-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Arjen Laarhoven	4c84f0dcc6	t3200-branch.sh: small language nit Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Brian Gernhardt	08b984fb54	Distinguish branches by more than case in tests. The renaming without config test changed a branch from q to Q, which fails on non-case sensitive file systems. Change the test to use q and q2. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Geert Bosch	01ebb9dc88	Fix renaming branch without config file Make git_config_rename_section return success if no config file exists. Otherwise, renaming a branch would abort, leaving the repository in an inconsistent state. [jc: test] Signed-off-by: Geert Bosch <bosch@gnat.com> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Paolo Bonzini	9debc3241b	git-fetch, git-branch: Support local --track via a special remote '.' This patch adds support for a dummy remote '.' to avoid having to declare a fake remote like [remote "local"] url = . fetch = refs/heads/:refs/heads/ Such a builtin remote simplifies the operation of "git-fetch", which will populate FETCH_HEAD but will not pretend that two repositories are in use, will not create a thin pack, and will not perform any useless remapping of names. The speed improvement is around 20%, and it should improve more if "git-fetch" is converted to a builtin. To this end, git-parse-remote is grown with a new kind of remote, 'builtin'. In git-fetch.sh, we treat the builtin remote specially in that it needs no pack/store operations. In fact, doing git-fetch on a builtin remote will simply populate FETCH_HEAD appropriately. The patch also improves of the --track/--no-track support, extending it so that branch.<name>.remote items referring '.' can be created. Finally, it fixes a typo in git-checkout.sh. Signed-off-by: Paolo Bonzini <bonzini@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Paolo Bonzini	0746d19a82	git-branch, git-checkout: autosetup for remote branch tracking In order to track and build on top of a branch 'topic' you track from your upstream repository, you often would end up doing this sequence: git checkout -b mytopic origin/topic git config --add branch.mytopic.remote origin git config --add branch.mytopic.merge refs/heads/topic This would first fork your own 'mytopic' branch from the 'topic' branch you track from the 'origin' repository; then it would set up two configuration variables so that 'git pull' without parameters does the right thing while you are on your own 'mytopic' branch. This commit adds a --track option to git-branch, so that "git branch --track mytopic origin/topic" performs the latter two actions when creating your 'mytopic' branch. If the configuration variable branch.autosetupmerge is set to true, you do not have to pass the --track option explicitly; further patches in this series allow setting the variable with a "git remote add" option. The configuration variable is off by default, and there is a --no-track option to countermand it even if the variable is set. Signed-off-by: Paolo Bonzini <bonzini@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Tom Prince	e0d10e1c63	[PATCH] Rename git-repo-config to git-config. Signed-off-by: Tom Prince <tom.prince@ualberta.net> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	8d78b5af23	git-checkout: fix branch name output from the command When switching branches with "git checkout", we internally did $arg^0 (aka $arg^{commit}) suffix but there was no need to. The improvement is easily visible in the change to an existing test t/3200-branch.sh in this commit; it was expecting rather ugly message. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Johannes Schindelin	dc81c58cd6	git-branch: rename config vars branch.<branch>.*, too When renaming a branch, the corresponding config section should be renamed, too. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Lars Hjemli	16c2bfbb44	rename_ref: use lstat(2) when testing for symlink The current check for symlinked reflogs was based on stat(2), which is utterly embarrassing. Fix it, and add a matching testcase. Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Lars Hjemli	c976d415e5	git-branch: add options and tests for branch renaming Extend git-branch with the following options: git-branch -m\|-M [<oldbranch>] newbranch The -M variation is required to force renaming over an exsisting branchname. This also indroduces $GIT_DIR/RENAME_REF which is a "metabranch" used when renaming branches. It will always hold the original sha1 for the latest renamed branch. Additionally, if $GIT_DIR/logs/RENAME_REF exists, all branch rename events are logged there. Finally, some testcases are added to verify the new options. Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	5d9e8ee78b	t3200: git-branch testsuite update The test expected "git branch --help" to exit successfully, but built-ins spawn "man" when given --help, and when the test is run, manpages may not be installed yet and "man" can legally exit non-zero in such a case. Also the new implementation logs "Created from master", instead of "Created from HEAD" in the reflog, which makes a lot more sense, so adjust the test to match that. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Christian Couder	9c7b0b3fc4	Remove empty ref directories that prevent creating a ref. This patch also adds test cases from Linus and Junio. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Shawn Pearce	d7fb7a373a	Test that git-branch -l works. If the user supplies -l to git-branch when creating a new branch then the new branch's log should be created automatically and the branch creation should be logged in that log. Further if a branch is being deleted and it had a log then also verify that the log was deleted. Test git-checkout -b foo -l for creating a new branch foo with a log and checking out that branch. Fixed git-checkout -b foo -l as the branch variable name was incorrect in the script. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	aa9dc7afd2	t3200: branch --help does not die anymore. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Alex Riesen	08db81a9f1	allow git-update-ref create refs with slashes in names Make git-update-ref create references with slashes in them. git-branch and git-checkout already support such reference names. git-branch can use git-update-ref to create the references in a more formal manner now. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	bc6146d2ab	'build' scripts before installing. Earlier we renamed git-foo.sh to git-foo while installing, which was mostly done by inertia than anything else. This however made writing tests to use scripts harder. This patch builds the scripts the same way as we build binaries from their sources. As a side effect, you can now specify non-standard paths you have your Perl binary is in when running the make. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Amos Waterland	a3b427b9fa	[PATCH] Do not create bogus branch from flag to git branch If you run `git branch --help', you will unexpectedly have created a new branch named "--help". This simple patch adds logic and a usage statement to catch this and similar problems, and adds a testcase for it. Signed-off-by: Amos Waterland <apw@rossby.metr.ou.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago

26 Commits (189d6b8bfae62ab0c0bc62877ba97d6d88ae1595)