kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Nanako Shiraishi	0cb0e143ff	tests: use "git xyzzy" form (t0000 - t3599) Converts tests between t0050-t3903. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Stephan Beyer	d492b31caf	t/: Use "test_must_fail git" instead of "! git" This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	41ac414ea2	Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test should succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>	17 years ago
Junio C Hamano	5be60078c9	Rewrite "git-frotz" to "git frotz" This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Junio C Hamano	a6080a0a44	War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>	18 years ago
Junio C Hamano	207dfa0791	Remove git-resolve. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Nicolas Pitre	ebd124c678	make commit message a little more consistent and conforting It is nicer to let the user know when a commit succeeded all the time, not only the first time. Also the commit sha1 is much more useful than the tree sha1 in this case. This patch also introduces a -q switch to supress this message as well as the summary of created/deleted files. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Robin Rosenberg	b599deec18	Error in test description of t1200-tutorial Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	6a74642c50	git-commit --amend: two fixes. When running "git commit --amend" only to fix the commit log message without any content change, we mistakenly showed the git-status output that says "nothing to commit" without commenting it out. If you have already run update-index but you want to amend the top commit, "git commit --amend --only" without any paths should have worked, because --only means "starting from the base commit, update-index these paths only to prepare the index to commit, and perform the commit". However, we refused -o without paths. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Linus Torvalds	9153983310	Log message printout cleanups On Sun, 16 Apr 2006, Junio C Hamano wrote: > > In the mid-term, I am hoping we can drop the generate_header() > callchain _and_ the custom code that formats commit log in-core, > found in cmd_log_wc(). Ok, this was nastier than expected, just because the dependencies between the different log-printing stuff were absolutely _everywhere_, but here's a patch that does exactly that. The patch is not very easy to read, and the "--patch-with-stat" thing is still broken (it does not call the "show_log()" thing properly for merges). That's not a new bug. In the new world order it _should_ do something like if (rev->logopt) show_log(rev, rev->logopt, "---\n"); but it doesn't. I haven't looked at the --with-stat logic, so I left it alone. That said, this patch removes more lines than it adds, and in particular, the "cmd_log_wc()" loop is now a very clean: while ((commit = get_revision(rev)) != NULL) { log_tree_commit(rev, commit); free(commit->buffer); commit->buffer = NULL; } so it doesn't get much prettier than this. All the complexity is entirely hidden in log-tree.c, and any code that needs to flush the log literally just needs to do the "if (rev->logopt) show_log(...)" incantation. I had to make the combined_diff() logic take a "struct rev_info" instead of just a "struct diff_options", but that part is pretty clean. This does change "git whatchanged" from using "diff-tree" as the commit descriptor to "commit", and I changed one of the tests to reflect that new reality. Otherwise everything still passes, and my other tests look fine too. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	eb0e0024b7	Fix t1200 test for breakage caused by removal of full-stop at the end of fast-forward message. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	130fcca63f	git-commit: revamp the git-commit semantics. - "git commit" without _any_ parameter keeps the traditional behaviour. It commits the current index. We commit the whole index even when this form is run from a subdirectory. - "git commit --include paths..." (or "git commit -i paths...") is equivalent to: git update-index --remove paths... git commit - "git commit paths..." acquires a new semantics. This is an incompatible change that needs user training, which I am still a bit reluctant to swallow, but enough people seem to have complained that it is confusing to them. It 1. refuses to run if $GIT_DIR/MERGE_HEAD exists, and reminds trained git users that the traditional semantics now needs -i flag. 2. refuses to run if named paths... are different in HEAD and the index (ditto about reminding). Added paths are OK. 3. reads HEAD commit into a temporary index file. 4. updates named paths... from the working tree in this temporary index. 5. does the same updates of the paths... from the working tree to the real index. 6. makes a commit using the temporary index that has the current HEAD as the parent, and updates the HEAD with this new commit. - "git commit --all" can run from a subdirectory, but it updates the index with all the modified files and does a whole tree commit. - In all cases, when the command decides not to create a new commit, the index is left as it was before the command is run. This means that the two "git diff" in the following sequence: $ git diff $ git commit -a $ git diff would show the same diff if you abort the commit process by making the commit log message empty. This commit also introduces much requested --author option. $ git commit --author 'A U Thor <author@example.com>' Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	ebedc31952	show-branch: make the current branch and merge commits stand out. This changes the character used to mark the commits that is on the branch from '+' to '*' for the current branch, to make it stand out. Also we show '-' for merge commits. When you have a handful branches with relatively long diversion, it is easier to see which one is the current branch this way. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	1fdfd05db2	tests: make scripts executable just for consistency. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	4bc51db0fe	t1200: use --topo-order to keep the show-branch output stable. Because a batch-oriented script creates many commits within a second on a fast machine, show-branch output of the test results are unstable without topo-order. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	494245d6d1	Revert "Adapt tutorial to cygwin and add test case" This reverts `2ae6c70674` commit.	19 years ago
Johannes Schindelin	2ae6c70674	Adapt tutorial to cygwin and add test case Lacking reliable symlinks, the instructions in the tutorial did not work in a cygwin setup. Also, a few outputs were not correct. This patch fixes these, and adds a test case which follows the instructions of the tutorial (except git-clone, -fetch and -push, which I have not done yet). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago

17 Commits (17225c49d501a304a0ae9ff370ca5cc3ae4afe4d)