kernel/git - git - PowerEL Git System

Commit Graph

Author	SHA1	Message	Date
Junio C Hamano	dfdac5d9b8	git-add -u: match the index with working tree. This is a shorthand of what "git commit -a" does in preparation for making a commit, which is: git diff-files --name-only -z \| git update-index --remove -z --stdin Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	fd1c3bf053	Rename add_file_to_index() to add_file_to_cache() This function was not called "add_file_to_cache()" only because an ancient program, update-cache, used that name as an internal function name that does something slightly different. Now that is gone, we can take over the better name. The plan is to name all functions that operate on the default index xxx_cache(). Later patches create a variant of them that take an explicit parameter xxx_index(), and then turn xxx_cache() functions into macros that use "the_index". Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	30ca07a249	_GIT_INDEX_OUTPUT: allow plumbing to output to an alternative index file. When defined, this allows plumbing commands that update the index (add, apply, checkout-index, merge-recursive, mv, read-tree, rm, update-index, and write-tree) to write their resulting index to an alternative index file while holding a lock to the original index file. With this, git-commit that jumps the index does not have to make an extra copy of the index file, and more importantly, it can do the update while holding the lock on the index. However, I think the interface to let an environment variable specify the output is a mistake, as shown in the documentation. If a curious user has the environment variable set to something other than the file GIT_INDEX_FILE points at, almost everything will break. This should instead be a command line parameter to tell these plumbing commands to write the result in the named file, to prevent stupid mistakes. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Linus Torvalds	9fc42d6091	Optimize directory listing with pathspec limiter. The way things are set up, you can now pass a "pathspec" to the "read_directory()" function. If you pass NULL, it acts exactly like it used to do (read everything). If you pass a non-NULL pointer, it will simplify it into a "these are the prefixes without any special characters", and stop any readdir() early if the path in question doesn't match any of the prefixes. NOTE! This does not obviate the need for the caller to do the exact pathspec match later. It's a first-level filter on "read_directory()", but it does not do the full pathspec thing. Maybe it should. But in the meantime, builtin-add.c really does need to do first read_directory(dir, .., pathspec); if (pathspec) prune_directory(dir, pathspec, baselen); ie the "prune_directory()" part will do the exact pathspec pruning, while the "read_directory()" will use the pathspec just to do some quick high-level pruning of the directories it will recurse into. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
James Bowes	896bdfa258	add: Support specifying an excludes file with a configuration variable This adds the 'core.excludesfile' configuration variable. This variable can hold a path to a file containing patterns of file names to exclude from git-add, like $GIT_DIR/info/exclude. Patterns in the excludes file are used in addition to those in info/exclude. Signed-off-by: James Bowes <jbowes@dangerouslyinc.com> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	df59afe3eb	Make a short-and-sweet "git-add -i" synonym for "git-add --interactive" Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	4d06f8ac43	Fix 'git add' with .gitignore When '*.ig' is ignored, and you have two files f.ig and d.ig/foo in the working tree, $ git add . correctly ignored f.ig but failed to ignore d.ig/foo. This was caused by a thinko in an earlier commit `4888c534`, when we tried to allow adding otherwise ignored files. After reverting that commit, this takes a much simpler approach. When we have an unmatched pathspec that talks about an existing pathname, we know it is an ignored path the user tried to add, so we include it in the set of paths directory walker returned. This does not let you say "git add -f D" on an ignored directory D and add everything under D. People can submit a patch to further allow it if they want to, but I think it is a saner behaviour to require explicit paths to be spelled out in such a case. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	6a1ad32519	git-add -f: allow adding otherwise ignored files. Instead of just warning, refuse to add otherwise ignored files by default, and allow it with an -f option. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	1e423f5655	git-add: warn when adding an ignored file with an explicit request. We allow otherwise ignored paths to be added to the index by spelling its path out on the command line, but we would warn the user about them when we do so. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	e23ca9e1f9	git-add: add ignored files when asked explicitly. One thing many people found confusing about git-add was that a file whose name matches an ignored pattern could not be added to the index. With this, such a file can be added by explicitly spelling its name to git-add. Fileglobs and recursive behaviour do not add ignored files to the index. That is, if a pattern '.o' is in .gitignore, and two files foo.o, bar/baz.o are in the working tree: $ git add foo.o $ git add '.o' $ git add bar Only the first form adds foo.o to the index. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	6a5ad23de6	git-add --interactive: add documentation Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	93b0d86aaf	git-add: error out when given no arguments. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	85023577a8	simplify inclusion of system header files. This is a mechanical clean-up of the way *.c files include system header files. (1) sources under compat/, platform sha-1 implementations, and xdelta code are exempt from the following rules; (2) the first #include must be "git-compat-util.h" or one of our own header file that includes it first (e.g. config.h, builtin.h, pkt-line.h); (3) system headers that are included in "git-compat-util.h" need not be included in individual C source files. (4) "git-compat-util.h" does not have to include subsystem specific header files (e.g. expat.h). Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Junio C Hamano	5cde71d64a	git-add --interactive A script to be driven when the user says "git add --interactive" is introduced. When it is run, first it runs its internal 'status' command to show the current status, and then goes into its internactive command loop. The command loop shows the list of subcommands available, and gives a prompt "What now> ". In general, when the prompt ends with a single '>', you can pick only one of the choices given and type return, like this: * Commands * 1: status 2: update 3: revert 4: add untracked 5: patch 6: diff 7: quit 8: help What now> 1 You also could say "s" or "sta" or "status" above as long as the choice is unique. The main command loop has 6 subcommands (plus help and quit). * 'status' shows the change between HEAD and index (i.e. what will be committed if you say "git commit"), and between index and working tree files (i.e. what you could stage further before "git commit" using "git-add") for each path. A sample output looks like this: staged unstaged path 1: binary nothing foo.png 2: +403/-35 +1/-1 git-add--interactive.perl It shows that foo.png has differences from HEAD (but that is binary so line count cannot be shown) and there is no difference between indexed copy and the working tree version (if the working tree version were also different, 'binary' would have been shown in place of 'nothing'). The other file, git-add--interactive.perl, has 403 lines added and 35 lines deleted if you commit what is in the index, but working tree file has further modifications (one addition and one deletion). * 'update' shows the status information and gives prompt "Update>>". When the prompt ends with double '>>', you can make more than one selection, concatenated with whitespace or comma. Also you can say ranges. E.g. "2-5 7,9" to choose 2,3,4,5,7,9 from the list. You can say '' to choose everything. What you chose are then highlighted with '', like this: staged unstaged path 1: binary nothing foo.png * 2: +403/-35 +1/-1 git-add--interactive.perl To remove selection, prefix the input with - like this: Update>> -2 After making the selection, answer with an empty line to stage the contents of working tree files for selected paths in the index. * 'revert' has a very similar UI to 'update', and the staged information for selected paths are reverted to that of the HEAD version. Reverting new paths makes them untracked. * 'add untracked' has a very similar UI to 'update' and 'revert', and lets you add untracked paths to the index. * 'patch' lets you choose one path out of 'status' like selection. After choosing the path, it presents diff between the index and the working tree file and asks you if you want to stage the change of each hunk. You can say: y - add the change from that hunk to index n - do not add the change from that hunk to index a - add the change from that hunk and all the rest to index d - do not the change from that hunk nor any of the rest to index j - do not decide on this hunk now, and view the next undecided hunk J - do not decide on this hunk now, and view the next hunk k - do not decide on this hunk now, and view the previous undecided hunk K - do not decide on this hunk now, and view the previous hunk After deciding the fate for all hunks, if there is any hunk that was chosen, the index is updated with the selected hunks. * 'diff' lets you review what will be committed (i.e. between HEAD and index). This is still rough, but does everything except a few things I think are needed. * 'patch' should be able to allow splitting a hunk into multiple hunks. * 'patch' does not adjust the line offsets @@ -k,l +m,n @@ in the hunk header. This does not have major problem in practice, but it _should_ do the adjustment. * It does not have any explicit support for a merge in progress; it may not work at all. Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Nicolas Pitre	366bfcb68f	make 'git add' a first class user friendly interface to the index This brings the power of the index up front using a proper mental model without talking about the index at all. See for example how all the technical discussion has been evacuated from the git-add man page. Any content to be committed must be added together. Whether that content comes from new files or modified files doesn't matter. You just need to "add" it, either with git-add, or by providing git-commit with -a (for already known files only of course). No need for a separate command to distinguish new vs modified files please. That would only screw the mental model everybody should have when using GIT. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	18 years ago
Liu Yubao	0b7c5a5450	Fix duplicate xmalloc in builtin-add [jc: patch came without sign-off but it was too obvious and trivial.] Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Liu Yubao	d48ffdbb0b	Fix duplicate xmalloc in builtin-add [jc: patch came without sign-off but it was too obvious and trivial.] Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	40aaae88ad	Better error message when we are unable to lock the index file Most of the callers except the one in refs.c use the function to update the index file. Among the index writers, everybody except write-tree dies if they cannot open it for writing. This gives the function an extra argument, to tell it to die when it cannot create a new file as the lockfile. The only caller that does not have to die is write-tree, because updating the index for the cache-tree part is optional and not being able to do so does not affect the correctness. I think we do not have to be so careful and make the failure into die() the same way as other callers, but that would be a different patch. Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Ramsay Allan Jones	8cdf33643d	Replace some calls to die(usage_str) with usage(usage_str). The only change in behaviour should be having a "usage: " prefix on the output string rather than "fatal: ", and an exit code of 129 rather than 128. Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Linus Torvalds	a633fca0c0	Call setup_git_directory() much earlier This changes the calling convention of built-in commands and passes the "prefix" (i.e. pathname of $PWD relative to the project root level) down to them. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Johannes Schindelin	11be42a476	Make git-mv a builtin This also moves add_file_to_index() to read-cache.c. Oh, and while touching builtin-add.c, it also removes a duplicate git_config() call. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Peter Eriksen	28f7581806	Substitute xmalloc()+memset(0) with xcalloc(). Signed-off-by: Peter Eriksen <s022018@student.dtu.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Johannes Schindelin	6244b24906	Close the index file between writing and committing Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	021b6e4549	Make index file locking code reusable to others. The framework to create lockfiles that are removed at exit is first used to reliably write the index file, but it is applicable to other things, so stop calling it "cache_file". This also rewords a few remaining error message that called the index file "cache file". Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Linus Torvalds	3c6a370b0e	Move pathspec matching from builtin-add.c into dir.c I'll use it for builtin-rm.c too. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Junio C Hamano	e8f990b4e4	builtin-add: fix unmatched pathspec warnings. "git add Documentation/" when Documentation directory exists does not barf (as it should not), but "git add ." barfed when it did not add anything. This was because we checked for the path prefix ("Documentation/" in the former case, and an empty string in the latter case) for existence, and lstat("", &st) would say "Huh?". Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Linus Torvalds	f25933987f	builtin-add: warn on unmatched pathspecs This is in the same spirit as what `bba319b5` and `45e48120` tried to do to help users. A command such as "git add Documentaiton" with misspelled pathspecs would give a friendly reminder with this. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago
Linus Torvalds	0d78153952	Do "git add" as a builtin First try. Let's see how well this works. In many ways, the hard parts of "git commit" are not so different from this, and a builtin commit would share a lot of the code, I think. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>	19 years ago

31 Commits (16a4c6176ad096881d0021f1a922fbcc2835f799)