These messages are relevant for the programmer only, not for the end
user. Thus, they can be unmarked for translation, saving translator
some work.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Positional arguments, such as $0, $1, etc, need to be stored on shell
variables for use in translatable strings, according to gettext manual
[1].
Add git-sh-setup.sh to LOCALIZED_SH variable in Makefile to enable
extraction of string marked for translation by xgettext.
Source git-sh-i18n in git-sh-setup.sh for gettext support.
git-sh-setup.sh is a shell library to be sourced by other shell scripts.
In order to avoid other scripts from sourcing git-sh-i18n twice, remove
line that sources it from them. Not sourcing git-sh-i18n in any script
that uses gettext would lead to failure due to, for instance, gettextln
not being found.
[1] http://www.gnu.org/software/gettext/manual/html_node/Preparing-Shell-Scripts.html
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message was not being extracted by xgettext, although it was marked
for translation, seemingly because it contained a command substitution.
Moreover, eval_gettext should be used instead of gettext for strings
with substitution.
See step 4. of section 15.5.2.1 Preparing Shell Scripts for
Internationalization from gettext manual [1]:
"Simplify translatable strings so that they don't contain command
substitution ("`...`" or "$(...)") [...]"
[1] http://www.gnu.org/software/gettext/manual/html_node/Preparing-Shell-Scripts.html
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a natural user-interface when looking for any change in the
code, not just regression. For example:
git bisect start --term-old fast --term-new slow
git bisect fast
git bisect slow
...
There were several proposed user-interfaces for this feature. This patch
implements it as options to 'git bisect start' for the following reasons:
* By construction, the terms will be valid for one and only one
bisection.
* Unlike positional arguments, using named options avoid having to
remember an order.
* We can combine user-defined terms and passing old/new commits as
argument to "git bisect start".
* The implementation is relatively simple.
See previous discussions:
http://mid.gmane.org/1435337896-20709-3-git-send-email-Matthieu.Moy@imag.fr
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As-is, the revisions that appear on the command-line are processed in
order. This would mix badly with code that changes the configuration
(e.g. change $TERM_GOOD and $TERM_BAD) while processing the options.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When not looking for a regression during a bisect but for a fix or a
change in another given property, it can be confusing to use 'good'
and 'bad'.
This patch introduce `git bisect new` and `git bisect old` as an
alternative to 'bad' and good': the commits which have a certain
property must be marked as `new` and the ones which do not as `old`.
The output will be the first commit after the change in the property.
During a new/old bisect session you cannot use bad/good commands and
vice-versa.
Some commands are still not available for old/new:
* git rev-list --bisect does not treat the revs/bisect/new and
revs/bisect/old-SHA1 files.
Old discussions:
- http://thread.gmane.org/gmane.comp.version-control.git/86063
introduced bisect fix unfixed to find fix.
- http://thread.gmane.org/gmane.comp.version-control.git/182398
discussion around bisect yes/no or old/new.
- http://thread.gmane.org/gmane.comp.version-control.git/199758
last discussion and reviews
New discussions:
- http://thread.gmane.org/gmane.comp.version-control.git/271320
( v2 1/7-4/7 )
- http://comments.gmane.org/gmane.comp.version-control.git/271343
( v2 5/7-7/7 )
Signed-off-by: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>
Signed-off-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is currently only a defensive check since the only terms are
bad/good and new/old, which pass it, but this is a preparation step for
accepting user-supplied terms.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create a file BISECT_TERMS in the repository .git to be read during a
bisection. There's no user-interface yet, but "git bisect" works if terms
other than old/new or bad/good are set in .git/BISECT_TERMS. The
fonctions to be changed if we add new terms are quite few.
In git-bisect.sh:
check_and_set_terms
bisect_voc
Co-authored-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Tweaked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>
Signed-off-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To add new tags like old/new and have keywords less confusing, the
first step is to avoid hardcoding the keywords.
The default mode is still bad/good.
Signed-off-by: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>
Signed-off-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running for example "git bisect bad HEAD" or
"git bisect good master", the parameter passed to
"git bisect (bad|good)" has to be parsed into a
commit hash before checking if it is the expected
commit or not.
We could do that in is_expected_rev() or in
check_expected_revs(), but it is already done in
bisect_state(). Let's just store the hash values
that result from this parsing, and then reuse
them after all the parsing is done.
This way we can also use a for loop over these
values to call bisect_write() on them, instead of
using eval.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Redirection operators should have a space before them, but not after them.
Signed-off-by: Jacopo Notarstefano <jacopo.notarstefano@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bisect log output of skipped commits introduced in f989cac "bisect:
Log possibly bad, skipped commits at bisection end" should obtain the range of
skipped commits from
git rev-list bad --not good-1 good-2
not
git rev-list bad --not good-1 --not good-2
when the skipped range contains a merge with good points in each parent.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the bisection completes with only skipped commits left to as possible
first bad commit, output the list of possible first bad commits to human
readers of the bisection log.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When bisect successfully finds a single revision, the first bad commit
should be shown to human readers of 'git bisect log'.
This resolves the apparent disconnect between the bisection result and
the log when a bug reporter says "I know that the first bad commit is
$rev, as you can see from $(git bisect log)".
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4796e823 ("bisect: introduce --no-checkout support into porcelain." Aug 4 2011)
made checking out the branch where we started depends on the "checkout" mode. But
unfortunately it lost the "|| exit" part after the checkout command.
As it makes no sense to continue if the checkout failed and as people have already
complained that the error message given when we just exit in this case is not clear, see:
http://thread.gmane.org/gmane.comp.version-control.git/180733/
this patch adds a "|| die <hopefully clear message>" part after the checkout command.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enhances the support for bisecting history in bare repositories.
The "git bisect" command no longer needs to be run inside a repository
with a working tree; it defaults to --no-checkout when run in a bare
repository.
Two tests are included to demonstrate this behaviour.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a few remaining lines that indented with spaces.
Also simplify the logic of checking out the original branch and reporting
error during "bisect reset".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All leading whitespace is now encoded with tabs.
After this patch, the following is true:
RAW=$(cat git-bisect.sh | md5sum) &&
ROUNDTRIP=$(cat git-bisect.sh | expand -i - | unexpand --first-only - | md5sum) &&
LEADING=$(sed -n "/^ */p" < git-bisect.sh | wc -l) &&
test $RAW = $ROUNDTRIP &&
test $LEADING = 0 &&
test -z "$(git diff -w HEAD~1 HEAD)"
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-bisect can now perform bisection of a history without performing
a checkout at each stage of the bisection process. Instead, HEAD is updated.
One use-case for this function is allow git bisect to be used with
damaged repositories where git checkout would fail because the tree
referenced by the commit is damaged.
It can also be used in other cases where actual checkout of the tree
is not required to progress the bisection.
Improved-by: Christian Couder <chriscool@tuxfamily.org>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder pointed out that the existing eval strategy
swallows an initial non-zero return. Using && to connect
the statements should fix this.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git bisect start' modifies some state prior to checking
that its arguments are valid.
This change moves argument validation before state modification
with the effect that state modification does not occur
unless argument validations succeeds.
An existing test is changed to check that new bisect state
is not created if arguments are invalid.
A new test is added to check that existing bisect state
is not modified if arguments are invalid.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "You need to start by" message in
bisect_next_check. This message assembled English output by hand so it
needed to be split up to make it translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the [Y/n] questions git-bisect presents, and leave a note
in a TRANSLATORS comment explaining that translators have to preserve
a mention of the Y/n characters since the program will expect them,
and not their localized equivalents.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize bisect_replay messages that use the $1 variable. Since it's
subroutine local we have to provide an alias for it for eval_gettext.
Since I was doing that anyway I've changed all other uses of $1
variable to use the alias variable for clarity.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ettextize bisect_reset messages that use the $1 variable. Since it's
subroutine local we have to provide an alias for it for eval_gettext.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize bisect_run messages that use the $@ variable. Since it's
subroutine local we have to provide an alias for it for eval_gettext.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If gitk is not available in the PATH, bisect ends up
exiting with the shell's 127 error code, confusing the git
wrapper into thinking that bisect is not a git command.
We already fallback to git-log if there doesn't seem to be a
graphical display available. We should do the same if gitk
is not available in our PATH at all. This not only fixes the
ugly error message, but is a much more sensible default than
failing to show the user anything.
Reported by Maxin John.
Tested-by: Maxin B. John <maxin@maxinbjohn.info>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git bisect replay' has a mandatory logfile argument, but the current
implementation doesn't check whether the user has specified one. When
the user omits the logfile argument, this leads to the following
unhelpful error message:
cannot read for replaying
So, check for the mandatory argument first, and provide a more
meaningful error message when it is omitted.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git bisect reset' (without the optional <commit> argument) returns to
the original HEAD from where the bisection was started. However,
when, for whatever reason, the user deleted the original HEAD before
invoking 'git bisect reset', then all he gets is an error message from
'git checkout':
fatal: invalid reference: somebranch
Let's try to be more helpful with an error message better describing
what went wrong and a suggestion about how to resolve the situation:
Could not check out original HEAD 'somebranch'. Try 'git bisect reset <commit>'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git bisect log' is implemented by a direct invocation of 'cat
"$GIT_DIR/BISECT_LOG"', without any sanity checks. Consequently,
running 'git bisect log' while not bisecting leads to an error,
because the bisect logfile doesn't exists. The accompanying error
message
cat: /path/to/repo/.git/BISECT_LOG: No such file or directory
is neither very helpful nor very friendly.
Instead of blindly trying to cat the log file, first check whether
there is a bisection going on (i.e. the bisect logfile exists), and
die with a more appropriate error message when not.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has exported the GREP_OPTIONS environment variable, the output
from "grep" and "egrep" in scripted Porcelains may be different from what
they expect. For example, we may want to count number of matching lines,
by "grep" piped to "wc -l", and GREP_OPTIONS=-C3 will break such use.
The approach taken by this change to address this issue is to protect only
our own use of grep/egrep. Because we do not unset it at the beginning of
our scripts, hook scripts run from the scripted Porcelains are exposed to
the same insanity this environment variable causes when grep/egrep is used
to implement logic (e.g. "grep | wc -l"), and it is entirely up to the
hook scripts to protect themselves.
On the other hand, applypatch-msg hook may want to show offending words in
the proposed commit log message using grep to the end user, and the user
might want to set GREP_OPTIONS=--color to paint the match more visibly.
The approach to protect only our own use without unsetting the environment
variable globally will allow this use case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit ad3f9a7 (Add '--bisect' revision machinery argument) the
'--bisect' option was added to easily pass bisection refs to
commands using the revision machinery.
So it is now shorter and safer to use the new '--bisect' revision
machinery option, than to compute the refs that we must pass.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
‘git bisect reset’ accepts an optional argument specifying a branch to
check out after cleaning up the bisection state. This lets you
specify an arbitrary commit.
In particular, this provides a way to clean the bisection state
without moving HEAD: ‘git bisect reset HEAD’. This may be useful if
you are not interested in the state before you began a bisect,
especially if checking out the old commit would be expensive and
invalidate most of your compiled tree.
Clarify the ‘git bisect reset’ documentation to explain this optional
argument, which was previously mentioned only in the usage message.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch replace the "--next-exit" option of "git bisect--helper"
with a "--next-all" option that does merge base checking using
the "check_good_are_ancestors_of_bad" function implemented in
"bisect.c" in a former patch.
The new "--next-all" option is then used in "git-bisect.sh" instead
of the "--next-exit" option, and all the shell functions in
"git-bisect.sh" that are now unused are removed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "sq" function was the only place using Perl in "git-bisect.sh",
this removes the Perl dependency in this script.
While at it, we also remove the sed instruction in the Makefile that
substituted @@PERL@@ with the Perl path in shell scripts, as this is
not needed anymore. (It is now only needed in "git-instaweb.sh" but
this command is dealt with separately in the Makefile.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
instead of "git bisect--helper --next-vars".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Vasco Almeida