When unpacking trees, set the default sparsity of the resultant index based
on repo settings and 'is_sparse_index_allowed()'.
Normally, when executing 'unpack_trees', the output index is marked sparse
when (and only when) it unpacks a sparse directory. However, an index may be
"sparse" even if it contains no sparse directories - when all files fall
inside the sparse-checkout definition or otherwise have SKIP_WORKTREE
disabled. Therefore, the output index may be marked "full" even when it is
"sparse", resulting in unnecessary 'ensure_full_index' calls when writing to
disk. Avoid this by setting the "default" index sparsity to match what is
expected for the repository.
As a consequence of this fix, the (non-merge) 'read-tree' performed when
applying a stash with untracked files no longer expands the index. Update
the corresponding test in 't1092'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update 'stash' to use 'merge_ort_nonrecursive()' to apply a stash to the
current working tree. When 'git stash apply' was converted from its shell
script implementation to a builtin in 8a0fc8d19d (stash: convert apply to
builtin, 2019-02-25), 'merge_recursive_generic()' was used to merge a stash
into the working tree as part of 'git stash (apply|pop)'. However, with the
single merge base used in 'do_apply_stash()', the commit wrapping done by
'merge_recursive_generic()' is not only unnecessary, but misleading (the
*real* merge base is labeled "constructed merge base"). Therefore, a
non-recursive merge of the working tree, stashed tree, and stash base tree
is more appropriate.
There are two options for a non-recursive merge-then-update-worktree
function: 'merge_trees()' and 'merge_ort_nonrecursive()'. Use
'merge_ort_nonrecursive()' to align with the default merge strategy used by
'git merge' (6a5fb96672 (Change default merge backend from recursive to ort,
2021-08-04)) and, because merge-ort does not operate in-place on the index,
avoid unnecessary index expansion. Update tests in 't1092' verifying index
expansion for 'git stash' accordingly.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index read in 'do_read_index()' does not exist on-disk, mark the
index "sparse" if the executing command does not require a full index and
sparse index is otherwise enabled.
Some commands (such as 'git stash -u') implicitly create a new index (when
the 'GIT_INDEX_FILE' variable points to a non-existent file) and perform
some operation on it. However, when this index is created, it isn't created
with the same sparsity settings as the repo index. As a result, while these
indexes may be sparse during the operation, they are always expanded before
being written to disk. We can avoid that expansion by defaulting the index
to "sparse", in which case it will only be expanded if the full index is
needed.
Note that the function 'set_new_index_sparsity()' is created despite having
only a single caller because additional callers will be added in a
subsequent patch.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose 'is_sparse_index_allowed()' publicly so that it may be used by
callers outside of 'sparse-index.c'. While no such callers exist yet, it
will be used in a subsequent commit.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable sparse index in 'git stash' by disabling
'command_requires_full_index'.
With sparse index enabled, some subcommands of 'stash' work without
expanding the index, e.g., 'git stash', 'git stash list', 'git stash drop',
etc. Others ensure the index is expanded either directly (as in the case of
'git stash [pop|apply]', where the call to 'merge_recursive_generic()' in
'do_apply_stash()' triggers the expansion), or in a command called
internally by stash (e.g., 'git update-index' in 'git stash -u'). So, in
addition to enabling sparse index, add tests to 't1092' demonstrating which
variants of 'git stash' expand the index, and which do not.
Finally, add the option to skip writing 'untracked.txt' in
'ensure_not_expanded', and use that option to successfully apply stashed
untracked files without a conflict in 'untracked.txt'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests verifying expected 'git stash' behavior in
't1092-sparse-checkout-compatibility'. These cases establish the expected
behavior of 'git stash' in a sparse-checkout and verify consistency both
with and without a sparse index. Although no sparse index compatibility has
been integrated into 'git stash' yet, the tests are all 'expect_success' -
we don't want the cone-mode sparse-checkout behavior to change depending on
whether it is using a sparse index or not. Therefore, we expect these tests
to continue passing once sparse index is integrated with 'git stash'.
Additionally, add performance test cases for 'git stash' both with and
without untracked files. Note that, unlike the other tests in
'p2000-sparse-operations.sh', the tests added for 'stash' are combination
operations. This is done to ensure the stash/unstash is not blocked by the
modification of '$SPARSE_CONE/a' performed as part of 'test_perf_on_all'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git remote -v` (`--verbose`) lists down the names of remotes along with
their URLs. It would be beneficial for users to also specify the filter
types for promisor remotes. Something like this -
origin remote-url (fetch) [blob:none]
origin remote-url (push)
Teach `git remote -v` to also specify the filters for promisor remotes.
Closes: https://github.com/gitgitgadget/git/issues/1211
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`detect-compiler` has accumulated a few compiler dependent workarounds
lately for the more and more ubiquitious gcc12. This is intended to make
CI set-ups work across tool-chain updates, but also help those
developers who build with `DEVELOPER=1`.
Alas, `detect-compiler` uses the locale dependent output of `$(CC) -v`
to parse for the version string, which fails unless it literally
contains ` version`.
Use `LANG=C $(CC) -v` instead to grep for stable output.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct choices of C compilers used in various CI jobs.
source: <patch-v3-1.1-8b3444ecc87-20220422T092015Z-avarab@gmail.com>
* ab/cc-package-fixes:
CI: select CC based on CC_PACKAGE (again)
Get rid of a bogus and over-eager coccinelle rule.
source: <xmqq1qxd6e4x.fsf@gitster.g>
* jc/cocci-xstrdup-or-null-fix:
cocci: drop bogus xstrdup_or_null() rule
"git format-patch <args> -- <pathspec>" lost the pathspec when
showing the second and subsequent commits, which has been
corrected.
source: <c36896a1-6247-123b-4fa3-b7eb24af1897@web.de>
* rs/format-patch-pathspec-fix:
2.36 format-patch regression fix
"git fast-export -- <pathspec>" lost the pathspec when showing the
second and subsequent commits, which has been corrected.
source: <2c988c7b-0efe-4222-4a43-8124fe1a9da6@web.de>
* rs/fast-export-pathspec-fix:
2.36 fast-export regression fix
"git show <commit1> <commit2>... -- <pathspec>" lost the pathspec
when showing the second and subsequent commits, which has been
corrected.
source: <xmqqo80j87g0.fsf_-_@gitster.g>
* jc/show-pathspec-fix:
2.36 show regression fix
Regression fix for 2.36 where "git name-rev" started to sometimes
reference strings after they are freed.
This fixes a regression in 2.36 and is slate to go to 2.36.1
source: <340c8810-d912-7b18-d46e-a9d43f20216a@web.de>
* rs/name-rev-fix-free-after-use:
Revert "name-rev: release unused name strings"
"diff-tree --stdin" has been broken for about a year, but 2.36
release broke it even worse by breaking running the command with
<pathspec>, which in turn broke "gitk" and got noticed. This has
been corrected by aligning its behaviour to that of "log".
This fixes a regression in 2.36 and is slate to go to 2.36.1
source: <xmqq7d7bsu2n.fsf@gitster.g>
* jc/diff-tree-stdin-fix:
2.36 gitk/diff-tree --stdin regression fix
"git submodule update" without pathspec should silently skip an
uninitialized submodule, but it started to become noisy by mistake.
This fixes a regression in 2.36 and is slate to go to 2.36.1
source: <pull.1258.v2.git.git.1650890741430.gitgitgadget@gmail.com>
* gc/submodule-update-part2:
submodule--helper: fix initialization of warn_if_uninitialized
The example was not in valid JSON format due to a duplicate key "sid".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We append an ellipsis and enclose it in backticks to indicate that it is
a function elsewhere, let's also use that here.
While at it, ensure the same for `waitpid()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 is designed to run correctly under python2.7 and python3, but
its functional behavior wrt importing user-entered text differs across
these environments:
Under python2, git-p4 "naively" writes the Perforce bytestream into git
metadata (and does not set an "encoding" header on the commits); this
means that any non-utf-8 byte sequences end up creating invalidly-encoded
commit metadata in git.
Under python3, git-p4 attempts to decode the Perforce bytestream as utf-8
data, and fails badly (with an unhelpful error) when non-utf-8 data is
encountered.
Perforce clients (especially p4v) encourage user entry of changelist
descriptions (and user full names) in OS-local encoding, and store the
resulting bytestream to the server unmodified - such that different
clients can end up creating mutually-unintelligible messages. The most
common inconsistency, in many Perforce environments, is likely to be utf-8
(typical in linux) vs cp-1252 (typical in windows).
Make the changelist-description- and user-fullname-handling code
python-runtime-agnostic, introducing three "strategies" selectable via
config:
- 'passthrough', behaving as previously under python2,
- 'strict', behaving as previously under python3, and
- 'fallback', favoring utf-8 but supporting a secondary encoding when
utf-8 decoding fails, and finally escaping high-range bytes if the
decoding with the secondary encoding also fails.
Keep the python2 default behavior as-is ('legacy' strategy), but switch
the python3 default strategy to 'fallback' with default fallback encoding
'cp1252'.
Also include tests exercising these encoding strategies, documentation for
the new config, and improve the user-facing error messages when decoding
does fail.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path taken by "git multi-pack-index" command from the end user
was compared with path internally prepared by the tool withut first
normalizing, which lead to duplicated paths not being noticed,
which has been corrected.
* ds/midx-normalize-pathname-before-comparison:
cache: use const char * for get_object_directory()
multi-pack-index: use --object-dir real path
midx: use real paths in lookup_multi_pack_index()
"git clone --origin X" leaked piece of memory that held value read
from the clone.defaultRemoteName configuration variable, which has
been plugged.
* jc/clone-remote-name-leak-fix:
clone: plug a miniscule leak
"git format-patch <args> -- <pathspec>" lost the pathspec when
showing the second and subsequent commits, which has been
corrected.
* rs/format-patch-pathspec-fix:
2.36 format-patch regression fix
"git fast-export -- <pathspec>" lost the pathspec when showing the
second and subsequent commits, which has been corrected.
* rs/fast-export-pathspec-fix:
2.36 fast-export regression fix
"git show <commit1> <commit2>... -- <pathspec>" lost the pathspec
when showing the second and subsequent commits, which has been
corrected.
* jc/show-pathspec-fix:
2.36 show regression fix
Add a coccinelle semantic patch necessary to reinforce the git coding style
guideline:
"Do not explicitly compute an integral value with constant 0 or '\ 0', or a
pointer value with constant NULL."
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13092a91 (cocci: refactor common patterns to use xstrdup_or_null(),
2016-10-12) introduced a rule to rewrite this conditional call to
xstrdup(E) and an assignment to variable V:
- if (E)
- V = xstrdup(E);
into an unconditional call to xstrdup_or_null(E) and an assignment
to variable V:
+ V = xstrdup_or_null(E);
which is utterly bogus. The original code may already have an
acceptable value in V and the conditional assignment may be to
improve the value already in V with a copy of a better value E when
(and only when) E is not NULL.
The rewritten construct unconditionally discards the existing value
of V and replaces it with a copy of E, even when E is NULL, which
changes the meaning of the program.
By the way, if it were
-if (E && !V)
- V = xstrdup(E);
+V = xstrdup_or_null(E);
it would probably have been correct. But there is no existing code
that would have been improved by such a rule, so let's just remove
the bogus one without replacing with the more specific one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote_name variable is first assigned a copy of the value of
the "clone.defaultremotename" configuration variable and then by the
value of the "--origin" command line option. The former is prepared
to see multiple instances of the configuration variable by freeing
the current value of the variable before a copy of the newly
discovered value gets assigned to it. The latter however blindly
assigned a copy of the new value to the variable, thereby leaking
the value read from the configuration variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git fast-export doesn't set no_free, so path limiting stopped working
after the first commit. Set the flag and add a basic test to make sure
only changes to the specified files are exported.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git format-patch only sets no_free when --output is given, causing it to
forget pathspecs after the first commit. Set no_free unconditionally
instead.
The existing test was unable to detect this breakage because it checks
stderr for the absence of a certain string, but format-patch writes to
stdout. Also the test was not checking the case of one commit modifying
multiple files and a pathspec limiting the diff. Replace it with a more
thorough one.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only surfaced as a regression after 2.36 release, but the
breakage was already there with us for at least a year.
e900d494 (diff: add an API for deferred freeing, 2021-02-11)
introduced a mechanism to delay freeing resources held in
diff_options struct that need to be kept as long as the struct will
be reused to compute diff. "git log -p" was taught to utilize the
mechanism but it was done with an incorrect assumption that the
underlying helper function, cmd_log_walk(), is called only once,
and it is OK to do the freeing at the end of it.
Alas, for "git show A B", the function is called once for each
commit given, so it is not OK to free the resources until we finish
calling it for all the commits given from the command line.
During 2.36 release cycle, we started clearing the <pathspec> as
part of this freeing, which made the bug a lot more visible.
Fix this breakage by tweaking how cmd_log_walk() frees the resources
at the end and using a variant of it that does not immediately free
the resources to show each commit object from the command line in
"git show".
Protect the fix with a few new tests.
Reported-by: Daniel Li <dan@danielyli.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some "simple" centralized workflows, users expect remote tracking
branch names to match local branch names. "git push" pushes to the
remote version/instance of the branch, and "git pull" pulls any changes
to the remote branch (changes made by the same user in another place, or
by other users).
This expectation is supported by the push.default default option "simple"
which refuses a default push for a mismatching tracking branch name, and
by the new branch.autosetupmerge option, "simple", which only sets up
remote tracking for same-name remote branches.
When a new branch has been created by the user and has not yet been
pushed (and push.default is not set to "current"), the user is prompted
with a "The current branch %s has no upstream branch" error, and
instructions on how to push and add tracking.
This error is helpful in that following the advice once per branch
"resolves" the issue for that branch forever, but inconvenient in that
for the "simple" centralized workflow, this is always the right thing to
do, so it would be better to just do it.
Support this workflow with a new config setting, push.autoSetupRemote,
which will cause a default push, when there is no remote tracking branch
configured, to push to the same-name on the remote and --set-upstream.
Also add a hint offering this new option when the "The current branch %s
has no upstream branch" error is encountered, and add corresponding tests.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "push.default=current" configured, a simple "git push" will push to
the same-name branch on the current branch's branch.<name>.pushRemote, or
remote.pushDefault, or origin. If none of these are defined, the push will
fail with error "fatal: No configured push destination".
The same "default to origin if no config" behavior applies with
"push.default=matching".
Other commands use "origin" as a default when there are multiple options,
but default to the single remote when there is only one - for example,
"git checkout <something>". This "assume the single remote if there is
only one" behavior is more friendly/useful than a defaulting behavior
that only uses the name "origin" no matter what.
Update "git push" to also default to the single remote (and finally fall
back to "origin" as default if there are several), for
"push.default=current" and for other current and future remote-defaulting
push behaviors.
This change also modifies the behavior of ls-remote in a consistent way,
so defaulting not only supplies 'origin', but any single configured remote
also.
Document the change in behavior, correct incorrect assumptions in related
tests, and add test cases reflecting this new single-remote-defaulting
behavior.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the default push.default option, "simple", beginners are
protected from accidentally pushing to the "wrong" branch in
centralized workflows: if the remote tracking branch they would push
to does not have the same name as the local branch, and they try to do
a "default push", they get an error and explanation with options.
There is a particular centralized workflow where this often happens:
a user branches to a new local topic branch from an existing
remote branch, eg with "checkout -b feature1 origin/master". With
the default branch.autosetupmerge configuration (value "true"), git
will automatically add origin/master as the upstream tracking branch.
When the user pushes with a default "git push", with the intention of
pushing their (new) topic branch to the remote, they get an error, and
(amongst other things) a suggestion to run "git push origin HEAD".
If they follow this suggestion the push succeeds, but on subsequent
default pushes they continue to get an error - so eventually they
figure out to add "-u" to change the tracking branch, or they spelunk
the push.default config doc as proposed and set it to "current", or
some GUI tooling does one or the other of these things for them.
When one of their coworkers later works on the same topic branch,
they don't get any of that "weirdness". They just "git checkout
feature1" and everything works exactly as they expect, with the shared
remote branch set up as remote tracking branch, and push and pull
working out of the box.
The "stable state" for this way of working is that local branches have
the same-name remote tracking branch (origin/feature1 in this
example), and multiple people can work on that remote feature branch
at the same time, trusting "git pull" to merge or rebase as required
for them to be able to push their interim changes to that same feature
branch on that same remote.
(merging from the upstream "master" branch, and merging back to it,
are separate more involved processes in this flow).
There is a problem in this flow/way of working, however, which is that
the first user, when they first branched from origin/master, ended up
with the "wrong" remote tracking branch (different from the stable
state). For a while, before they pushed (and maybe longer, if they
don't use -u/--set-upstream), their "git pull" wasn't getting other
users' changes to the feature branch - it was getting any changes from
the remote "master" branch instead (a completely different class of
changes!)
An experienced git user might say "well yeah, that's what it means to
have the remote tracking branch set to origin/master!" - but the
original user above didn't *ask* to have the remote master branch
added as remote tracking branch - that just happened automatically
when they branched their feature branch. They didn't necessarily even
notice or understand the meaning of the "set up to track 'origin/master'"
message when they created the branch - especially if they are using a
GUI.
Looking at how to fix this, you might think "OK, so disable auto setup
of remote tracking - set branch.autosetupmerge to false" - but that
will inconvenience the *second* user in this story - the one who just
wanted to start working on the topic branch. The first and second
users swap roles at different points in time of course - they should
both have a sane configuration that does the right thing in both
situations.
Make this "branches have the same name locally as on the remote"
workflow less painful / more obvious by introducing a new
branch.autosetupmerge option called "simple", to match the same-name
"push.default" option that makes similar assumptions.
This new option automatically sets up tracking in a *subset* of the
current default situations: when the original ref is a remote tracking
branch *and* has the same branch name on the remote (as the new local
branch name).
Update the error displayed when the 'push.default=simple' configuration
rejects a mismatching-upstream-name default push, to offer this new
branch.autosetupmerge option that will prevent this class of error.
With this new configuration, in the example situation above, the first
user does *not* get origin/master set up as the tracking branch for
the new local branch. If they "git pull" in their new local-only
branch, they get an error explaining there is no upstream branch -
which makes sense and is helpful. If they "git push", they get an
error explaining how to push *and* suggesting they specify
--set-upstream - which is exactly the right thing to do for them.
This new option is likely not appropriate for users intentionally
implementing a "triangular workflow" with a shared upstream tracking
branch, that they "git pull" in and a "private" feature branch that
they push/force-push to just for remote safe-keeping until they are
ready to push up to the shared branch explicitly/separately. Such
users are likely to prefer keeping the current default
merge.autosetupmerge=true behavior, and change their push.default to
"current".
Also extend the existing branch tests with three new cases testing
this option - the obvious matching-name and non-matching-name cases,
and also a non-matching-ref-type case. The matching-name case needs to
temporarily create an independent repo to fetch from, as the general
strategy of using the local repo as the remote in these tests
precludes locally branching with the same name as in the "remote".
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regression fix for 2.36 where "git name-rev" started to sometimes
reference strings after they are freed.
* rs/name-rev-fix-free-after-use:
Revert "name-rev: release unused name strings"
Victoria Dye