This patch adds the configuration `am.keepcr` for git-am. It also adds
`--no-keep-cr` parameter for git-am to give the possibility to
override configuration from command line.
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c2ca1d7 (Allow mailsplit (and hence git-am) to handle mails with CRLF
line-endings, 2009-08-04) fixed "git mailsplit" to help people with
MUA whose output from save-as command uses CRLF as line terminators by
stripping CR at the end of lines.
However, when you know you are feeding output from "git format-patch"
directly to "git am", and especially when your contents have CR at the
end of line, such stripping is undesirable. To help such a use case,
teach --keep-cr option to "git am" and pass that to "git mailinfo".
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rebase calls this same function "--continue", which means
users may be trained to type it. There is no reason to
deprecate --resolved (or -r), so we will keep it as a
synonym.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
Describe what a scissors mark looks like, and explain in what situation
it is often used.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --ignore-whitespace option and corresponding config bool to
ignore whitespace differences while applying patches, akin to the
'patch' program.
'git am', 'git rebase' and the bash git completion are made aware of
this option.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am and git-rebase are talkative scripts. Teach them to be quiet when
told, allowing them to speak only when they fail or experience errors.
The quiet option is maintained when git-am or git-rebase fails to apply
a patch. This means subsequent --resolved, --continue, --skip, --abort
invocations will be quiet if the original invocation was quiet.
Drop a handful of >&2 redirection; the rest of the program sends all the
info messages to stdout, not to stderr.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's nice to know that 'it' is git-am or the subject line. Whitespace
implies characters so just remove characters.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option tells 'git-am' to ignore the date header field
recorded in the format-patch output. The commits will have the
timestamp when they are created instead.
You can work a lot in one day to accumulate many changes, but
apply and push to the public repository only some of them at
the end of the first day. Then next day you can spend all your
working hours reading comics or chatting with your coworkers,
and apply your remaining patches from the previous day using
this option to pretend that you have been working at the end
of the day.
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --reject, git-am simply passes the --reject option to git-apply and thus
allows people to work with reject files if they so prefer.
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to a200337 (git-am: propagate -C<n>, -p<n> options as well,
2008-12-04) and commits around it, "git am" is equipped to correctly
propagate the command line flags such as -C/-p/-whitespace across a patch
failure and restart.
It is trivial to support --directory option now, resurrecting previous
attempts by Kevin and Simon.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-apply documentation says that --binary is a historical option.
This patch lets git-am ignore --binary and removes advertisements of this
option.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-am, it sounds awkward to have the patches in ".git/rebase/",
but for technical reasons, we have to keep the same directory name
for git-am and git-rebase. ".git/rebase-apply" seems to be a good
compromise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After failing to apply patches in the middle of a series, "git am --abort"
lets you go back to the original commit.
[jc: doc/help update from Olivier, and fixups for "am -3" squashed in]
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the files generated and used during a rebase are never to be
tracked, they should live in $GIT_DIR. While at it, avoid the rather
meaningless term "dotest" to "rebase", and unhide ".dotest-merge".
This was wished for on the mailing list, but so far unimplemented.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Invoking git-am or git-mailsplit without mbox or Maildir results in
reading an mbox from stdin. Mention this in the synopsis and usage
strings.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge has always set ORIG_HEAD but never mentioned it, while we
recently added it to am and rebase. These facts should be reflected
in the documentation.
git-reset also sets ORIG_HEAD, but that fact is already mentioned in
the very first example so no changes were needed there.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been supported for a long time, but I do not think this feature has
been in use in the real world at all. We would eventually move this out
of the toplevel of the work tree and to somewhere under $GIT_DIR, so let's
remove the command line option to specify the location now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I believe noone uses git-applymbox, and noone definitely should, since it
is supposed to be completely superseded and everything by its younger
cousin git-am. The only known person in the universe to use it was Linus
and he declared some time ago that he will try to use git-am instead in his
famous dotest script.
The trouble is that git-applymbox existence creates confusing UI. I'm a bit
like a recycled newbie to the git porcelain and *I* was confused by
git-applymbox primitiveness until I've realized a while later that I'm of
course using the wrong command.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add --keep to synopsis.
The synopsys used a mix of tabs and spaces, unify to use only
spaces.
Shuffle options around in synopsys and description for grouping
them logically.
Add more gitlink references to other commands.
Various grammatical fixes and improvements.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-am.txt missing several short versions
of options. Added documentation for --resolvemsg=<msg>
command-line option.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is originally from Andy Parkins whose patch used --patchdepth; let's
use -p which is more in line with the underlying git-apply.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add -C[NUM] to git-am and git-rebase so that patches can be applied even
if context has changed a bit.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since we are talking about allowing potentially incompatible UI
changes in v1.5.0 iff the change improves the general situation,
I would say why not.
There is --no-utf8 flag to avoid re-coding from botching the log
message just in case, but we may not even need it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We were missing the --whitespace option in the usage string for
git-apply and git-am, so this commit adds them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In addition, also fixes a few synopses to be more consistent and a gitlink.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-am script actually transform --utf8 and --keep to -u and -k when
sent to git-mailinfo.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Michal Sojka