An error message is already printed by sha1_object_info itself, and
the failed entries are additionally marked in the listing.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the callback function invoked from read_tree_recursive() returns
the value `READ_TREE_RECURSIVE` for a gitlink entry, the traversal will
now continue into the tree connected to the gitlinked commit. This
functionality can be used to allow inter-repository operations, but
since the current users of read_tree_recursive() does not yet support
such operations, they have been modified where necessary to make sure
that they never return READ_TREE_RECURSIVE for gitlink entries (hence
no change in behaviour should be introduces by this patch alone).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The established behaviour of "git ls-tree $tree_ish" run from a subdirectory
"sub/dir" in a work tree is to limit the output to the paths in the
subdirectory, and strip off the leading "sub/dir" from the output, since
3c5e846 (ls-tree: major rewrite to do pathspec, 2005-11-26).
This was a "usability" feature made back in the days when the line between
Porcelain and plumbing was blurry, and in retrospect, it probably was
misguided. The behaviour may be what the end user would expect when the
command is run interactively from a subdirectory, but it also means that a
scripted Porcelain that wants to use the command to list the full contents
of a tree object has to do cd_to_toplevel (and save the output from
"rev-parse --show-prefix" before doing so, so that it can be used as a
pathspec if it wants to limit its operation to the original subdirectory
in other commands).
This new option makes the command operate on the full tree object,
regardless of where in the work tree it is run from. It also implies the
behaviour that is triggered by the existing --full-name option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds fflush(NULL) before fork() in start_command(), to keep
the generic interface safe.
A remaining use of fork() with no flushing is in a comment in
show_tree(). Rewrite that comment to use start_command().
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a pointer parameter to read_tree_recursive(), which is passed to the
callback function. This allows callers of read_tree_recursive() to
share data with the callback without resorting to global variables. All
current callers pass NULL.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* quote_c_style works on a strbuf instead of a wild buffer.
* quote_c_style is now clever enough to not add double quotes if not needed.
* write_name_quoted inherits those advantages, but also take a different
set of arguments. Now instead of asking for quotes or not, you pass a
"terminator". If it's \0 then we assume you don't want to escape, else C
escaping is performed. In any case, the terminator is also appended to the
stream. It also no longer takes the prefix/prefix_len arguments, as it's
seldomly used, and makes some optimizations harder.
* write_name_quotedpfx is created to work like write_name_quoted and take
the prefix/prefix_len arguments.
Thanks to those API changes, diff.c has somehow lost weight, thanks to the
removal of functions that were wrappers around the old write_name_quoted
trying to give it a semantics like the new one, but performing a lot of
allocations for this goal. Now we always write directly to the stream, no
intermediate allocation is performed.
As a side effect of the refactor in builtin-apply.c, the length of the bar
graphs in diffstats are not affected anymore by the fact that the path was
clipped.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Add -l/--long option to git-ls-tree command, which displays
object size of a blob entry. Object size is placed after
object id (left-justified with minimum width of 7 characters).
For non-blob entries `-' is used.
Rationale: for non-blob entries size of an object has no much
meaning, and is not very interesting. Moreover, in planned
pack v4 tree objects would be constructed on demand, so tree
size would need to be calculated.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This teaches the really fundamental core SHA1 object handling routines
about gitlinks. We can compare trees with gitlinks in them (although we
can not actually generate patches for them yet - just raw git diffs),
and they show up as commits in "git ls-tree".
We also know to compare gitlinks as if they were directories (ie the
normal "sort as trees" rules apply).
[jc: amended a cut&paste error]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There were instances of strncmp() that were formatted improperly
(e.g. whitespace around parameter before closing parenthesis)
that caused the earlier mechanical conversion step to miss
them. This step cleans them up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the calling convention of built-in commands and
passes the "prefix" (i.e. pathname of $PWD relative to the
project root level) down to them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead, just use the tree buffer directly, and use the tree-walk
infrastructure to walk the buffers instead of the tree-entry list.
The tree-entry list is inefficient, and generates tons of small
allocations for no good reason. The tree-walk infrastructure is
generally no harder to use than following a linked list, and allows
us to do most tree parsing in-place.
Some programs still use the old tree-entry lists, and are a bit
painful to convert without major surgery. For them we have a helper
function that creates a temporary tree-entry list on demand.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This finally removes the tree-entry list from "struct tree", since most of
the users can just use the tree-walk infrastructure to walk the raw tree
buffers instead of the tree-entry list.
The tree-entry list is inefficient, and generates tons of small
allocations for no good reason. The tree-walk infrastructure is generally
no harder to use than following a linked list, and allows us to do most
tree parsing in-place.
Some programs still use the old tree-entry lists, and are a bit painful to
convert without major surgery. For them we have a helper function that
creates a temporary tree-entry list on demand. We can convert those too
eventually, but with this they no longer affect any users who don't need
the explicit lists.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces occurences of "blob", "commit", "tag", and "tree",
where they're really used as type specifiers, which we already
have defined global constants for.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes sure that many commands that take refs on the command
line to honor core.warnambiguousrefs configuration. Earlier,
the commands affected by this patch did not read the
configuration file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes read_tree_recursive and read_tree take a struct tree
instead of a buffer. It also move the declaration of read_tree into
tree.h (where struct tree is defined), and updates ls-tree and
diff-index (the only places that presently use read_tree*()) to use
the new versions.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When run from a subdirectory, even though we filtered the output
based on where we were using pathspec, we wrote out the
repository relative paths, not subtree relative paths. This
changes things so that it shows only the current subdirectory
relative paths.
For example, in Documentation subdirectory of git itself, this
used to be the case:
$ git-ls-tree --name-only HEAD | grep how
Documentation/git-show-branch.txt
Documentation/git-show-index.txt
Documentation/howto-index.sh
Documentation/howto
But now it does this instead:
$ git-ls-tree --name-only HEAD | grep how
git-show-branch.txt
git-show-index.txt
howto-index.sh
howto
There are two things to keep in mind.
1. This shows nothing.
$ git-ls-tree --name-only HEAD ../ppc/
This is to make things consistent with ls-files, which
refuses relative path that goes uplevel.
2. These show things in full repository relative paths. In this
case, paths outside the current subdirectory are also shown.
$ git-ls-tree --name-only --full-name HEAD | grep how
Documentation/git-show-branch.txt
Documentation/git-show-index.txt
Documentation/howto-index.sh
Documentation/howto
$ git-ls-tree --name-only --full-name HEAD ../ppc/
ppc/sha1.c
ppc/sha1.h
ppc/sha1ppc.S
The flag --full-name gives the same behaviour as 1.0, so it
ought to be the default if we really care about the backward
compatibility, but in practice no Porcelain runs ls-tree from a
subdirectory yet, and without --full-name is more human
friendly, so hopefully the default being not --full-name would
be acceptable.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fingers of some "git diff" users are trained to do --name-only
which git-ls-tree unfortunately does not take. With this,
cd sub/directory && git-ls-tree -r --name-only ..
would show only the names not object names nor modes. I threw
in another synonym --name-status only for usability, but
obviously ls-tree does not do any comparison so what it does is
the same as --name-only.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this:
git-ls-tree -d HEAD -- drivers/net/
shows only immediate subtrees of drivers/net.
git-ls-tree -d -t HEAD -- drivers/net/
shows drivers, drivers/net and immediate subtrees of
drivers/net.
git-ls-tree -d -r HEAD -- drivers/net/
shows drivers, drivers/net and all subtrees of drivers/net (but
not blobs).
Signed-off-by: Junio C Hamano <junkio@cox.net>
The old (new) behaviour was that it only shows trees if the object is
specified exactly, and recursive is not set. That makes sense, because
there is obviously nothing else it can show for that case.
However, with the new "-t" option, it will show the tree even with "-r",
as it traverses down into it.
NOTE! This also means that it will show all trees leading up to that tree.
For example, if you do a
git-ls-tree -t HEAD -- drivers/char/this/file/does/not/exist
it will show the trees that lead up to the files that do not exist:
[torvalds@g5 linux]$ git-ls-tree -t HEAD -- drivers/char/this/file/does/not/exist
040000 tree 9cb687b77dcd64bf82e9a73214db467c964c1266 drivers
040000 tree 298e2fadf0ff3867d1ef49936fd2c7bf6ce1eb66 drivers/char
[torvalds@g5 linux]$
and note how this is true even though I didn't specify "-r": the fact that
I supplied a pathspec automatically implies "enough recursion" for that
particular pathspec.
I think the code is cleaner and easier to understand too: the patch looks
bigger, but it's really just splitting up the "should we recurse into this
tree" into a function of its own.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes ls-tree to work from subdirectory. It defaults to
show the paths under the current subdirectory, and interprets
user-supplied paths as relative to the current subdirectory.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The rewrite to match ls-files/diff-tree behaviour accidentally
lost the name quoting. I am not proud about this code, but this
would get the test going.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It modifies the selection a bit, so that a pathspec that is a superset of
a particular tree path will always cause it to recurse into that tree.
As an example, let's say that we do
git-ls-tree HEAD drivers/char
_without_ the "-r". What will happen is that it will start out doing all
the base tree, and for "drivers" it will notice that it's a proper subset
of "drivers/char", so it will always recurse into _that_ tree (but not
into other trees).
Then, it will not match anything else than "char" in that subdirectory,
and because that's not a proper superset (it's an exact match), it will
_not_ recurse into it, so you get:
[torvalds@g5 linux]$ ~/git/git-ls-tree HEAD drivers/char
040000 tree 9568cda453aae205bb58983747fa73b9696d9d51 drivers/char
which is what you got with the old git-ls-tree too.
But interestingly, if you add the slash, it will become a proper superset
and it will recurse into _that_ subdirectory (but no deeper: so if you
want all subdirectories _below_ drivers/char/, you still need to give
"-r"):
[torvalds@g5 linux]$ ~/git/git-ls-tree HEAD drivers/char/
100644 blob 2b6b1d772ed776fff87927fc34adc2e40500218e drivers/char/.gitignore
100644 blob 56b8a2e76ab10a5c21787cb7068a846075cbaffd drivers/char/ChangeLog
100644 blob 970f70d498f4c814e1cf3362e33d7e23ac53c299 drivers/char/Kconfig
...
See? This is on top of the previous two diffs, holler if you want a whole
new "everything combined" version..
It hasn't gotten lots of testing, but it should work.
Linus
To get more a "git-ls-files" approach, this trivial patch (on top of my
previous one) enables recursion, and doesn't show partial trees.
[jc: after further discussion, this version enables recursion by default,
and you can disable it with "-d" flag.
git-ls-tree -d HEAD Documentation/no/such/directory
shows Documentation tree (without -d it shows nothing).
git-ls-tree HEAD
shows everything from the tree. Only to get the single level from the top
git-ls-tree -d HEAD
is needed. But there is no way to get the single level with pathspec.
You need to extract the object name of Documentation tree from the parent
tree and run
git-ls-tree -d $tree_id_of_Documentation_tree
to get something similar to what you can get from the current
git-ls-tree HEAD Documentation
]
git-ls-tree should be rewritten to use a pathspec the same way everybody
else does. Right now it's the odd man out: if you do
git-ls-tree HEAD divers/char drivers/
it will show the same files _twice_, which is not how pathspecs in general
work.
How about this patch? It breaks some of the git-ls-tree tests, but it
makes git-ls-tree work a lot more like other git pathspec commands, and it
removes more than 150 lines by re-using the recursive tree traversal (but
the "-d" flag is gone for good, so I'm not pushing this too hard).
Linus
This patch fixes a bug in git-ls-tree in which the wrong filenames are
listed if the exact same file and directory contents are present in
another location in the tree.
Added a new series of test cases for directory and filename handling.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
All usage strings are now declared as static const char [].
This is carried over from my old git-pb branch.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes the problem with ls-tree which failed to show
"drivers/char" directory when the user asked for "drivers/char/"
from the command line. At the same time, if "drivers/char" were
a non directory, "drivers/char/" would not show it. This is
consistent with the way diffcore-pathspec has been recently
fixed.
This adds back the diffcore-pathspec test,dropped when my
earlier diffcore-pathspec fix was rejected.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a complete rewrite of ls-tree to make it behave more
like what "/bin/ls -a" does in the current working directory.
Namely, the changes are:
- Unlike the old ls-tree behaviour that used paths arguments to
restrict output (not that it worked as intended---as pointed
out in the mailing list discussion, it was quite incoherent),
this rewrite uses paths arguments to specify what to show.
- Without arguments, it implicitly uses the root level as its
sole argument ("/bin/ls -a" behaves as if "." is given
without argument).
- Without -r (recursive) flag, it shows the named blob (either
file or symlink), or the named tree and its immediate
children.
- With -r flag, it shows the named path, and recursively
descends into it if it is a tree.
- With -d flag, it shows the named path and does not show its
children even if the path is a tree, nor descends into it
recursively.
This is still request-for-comments patch. There is no mailing
list consensus that this proposed new behaviour is a good one.
The patch to t/t3100-ls-tree-restrict.sh illustrates
user-visible behaviour changes. Namely:
* "git-ls-tree $tree path1 path0" lists path1 first and then
path0. It used to use paths as an output restrictor and
showed output in cache entry order (i.e. path0 first and then
path1) regardless of the order of paths arguments.
* "git-ls-tree $tree path2" lists path2 and its immediate
children but having explicit paths argument does not imply
recursive behaviour anymore, hence paths/baz is shown but not
paths/baz/b.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use SP as the column separator except the ones before path which
uses TAB, to make the output format consistent across ls-* and
diff-* commands.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Enhance git-ls-tree to allow optional 'match paths' that
restricts the output of git-ls-tree. This is useful to retrieve
a single file's SHA1 out of a tree without creating an index.
[JC: I added the test case]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix various things that sparse complains about:
- use NULL instead of 0
- make sure we declare everything properly, or mark it static
- use proper function declarations ("fn(void)" instead of "fn()")
Sparse is always right.
Fixes all in-code names that leaved during "big name change".
Signed-off-by: Alexey Nezhdanov <snake@penza-gsm.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Raw hashes should be unsigned char.
- String functions want signed char.
- Hash and compress functions want unsigned char.
Signed-off By: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
cleanup: this patch adds a free() to ls-tree.c.
(Technically it's not a memory leak yet because the buffer is allocated
once by the function and then the utility exits - but it's a tad cleaner
to not leave such assumptions in the code, so that if someone reuses the
function (or extends the utility to include a loop) the uncleanliness
doesnt develop into a real memory leak.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Forward-ported.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Some commands initialize sha1_file_directory by hand. There is no
need to do so; sha1_file.c knows how to handle it.
The next patch will remove the variable altogether.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This allows the programs to use various simplified versions of
the SHA1 names, eg just say "HEAD" for the SHA1 pointed to by
the .git/HEAD file etc.
For example, this commit has been done with
git-commit-tree $(git-write-tree) -p HEAD
instead of the traditional "$(cat .git/HEAD)" syntax.
This patch renames read_tree_with_tree_or_commit_sha1() to
read_object_with_reference() and extends it to automatically
dereference not just "commit" objects but "tag" objects. With
this patch, you can say e.g.:
ls-tree $tag
read-tree -m $(merge-base $tag $HEAD) $tag $HEAD
diff-cache $tag
diff-tree $tag $HEAD
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Updates ls-tree.c to use read_tree_with_tree_or_commit_sha1()
function. The command can take either tree or commit IDs with
this patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Stephen Boyd