In 036876a106 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" becomes more careful when checking the refs.
* sj/ref-consistency-checks-more:
builtin/fsck: add `git refs verify` child process
packed-backend: check whether the "packed-refs" is sorted
packed-backend: add "packed-refs" entry consistency check
packed-backend: check whether the refname contains NUL characters
packed-backend: add "packed-refs" header consistency check
packed-backend: check if header starts with "# pack-refs with: "
packed-backend: check whether the "packed-refs" is regular file
builtin/refs: get worktrees without reading head information
t0602: use subshell to ensure working directory unchanged
In "packed-backend.c", there are some functions such as "create_snapshot"
and "next_record" which would check the correctness of the content of
the "packed-ref" file. When anything is bad, the program will die.
It may seem that we have nothing relevant to above feature, because we
are going to read and parse the raw "packed-ref" file without creating
the snapshot and using the ref iterator to check the consistency.
However, when using "get_worktrees" in "builtin/refs", we would parse
the "HEAD" information. If the referent of the "HEAD" is inside the
"packed-ref", we will call "create_snapshot" function to parse the
"packed-ref" to get the information. No matter whether the entry of
"HEAD" in "packed-ref" is correct, "create_snapshot" would call
"verify_buffer_safe" to check whether there is a newline in the last
line of the file. If not, the program will die.
Although this behavior has no harm for the program, it will
short-circuit the program. When the users execute "git refs verify" or
"git fsck", we should avoid reading the head information, which may
execute the read operation in packed backend with stricter checks to die
the program. Instead, we should continue to check other parts of the
"packed-refs" file completely.
Fortunately, in 465a22b338 (worktree: skip reading HEAD when repairing
worktrees, 2023-12-29), we have introduced a function
"get_worktrees_internal" which allows us to get worktrees without
reading head information.
Create a new exposed function "get_worktrees_without_reading_head", then
replace the "get_worktrees" in "builtin/refs" with the new created
function.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git refs migrate" subcommand converts the backend used for ref
storage. It always migrates reflog data as well as refs. Introduce an
option to exclude reflogs from migration, allowing them to be discarded
when they are unnecessary.
This is particularly useful in server-side repositories, where reflogs
are typically not expected. However, some repositories may still have
them due to historical reasons, such as bugs, misconfigurations, or
administrative decisions to enable reflogs for debugging. In such
repositories, it would be optimal to drop reflogs during the migration.
To address this, introduce the '--no-reflog' flag, which prevents reflog
migration. When this flag is used, reflogs from the original reference
backend are migrated. Since only the new reference backend remains in
the repository, all previous reflogs are permanently discarded.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Built-in Git subcommands are supplied the repository object to work
with; they learned to do the same when they invoke sub-subcommands.
* kn/pass-repo-to-builtin-sub-sub-commands:
builtin: pass repository to sub commands
In 9b1cb5070f (builtin: add a repository parameter for builtin
functions, 2024-09-13) the repository was passed down to all builtin
commands. This allowed the repository to be passed down to lower layers
without depending on the global `the_repository` variable.
Continue this work by also passing down the repository parameter from
the command to sub-commands. This will help pass down the repository to
other subsystems and cleanup usage of global variables like
'the_repository' and 'the_hash_algo'.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have already set up the infrastructure to check the consistency for
refs, but we do not support multiple worktrees. However, "git-fsck(1)"
will check the refs of worktrees. As we decide to get feature parity
with "git-fsck(1)", we need to set up support for multiple worktrees.
Because each worktree has its own specific refs, instead of just showing
the users "refs/worktree/foo", we need to display the full name such as
"worktrees/<id>/refs/worktree/foo". So we should know the id of the
worktree to get the full name. Add a new parameter "struct worktree *"
for "refs-internal.h::fsck_fn". Then change the related functions to
follow this new interface.
The "packed-refs" only exists in the main worktree, so we should only
check "packed-refs" in the main worktree. Use "is_main_worktree" method
to skip checking "packed-refs" in "packed_fsck" function.
Then, enhance the "files-backend.c::files_fsck_refs_dir" function to add
"worktree/<id>/" prefix when we are not in the main worktree.
Last, add a new test to check the refname when there are multiple
worktrees to exercise the code.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new subcommand "verify" in git-refs(1) to allow the user to
check the reference database consistency and also this subcommand will
be used as the entry point of checking refs for "git-fsck(1)".
Add "verbose" field into "fsck_options" to indicate whether we should
print verbose messages when checking refs and objects consistency.
Remove bit-field for "strict" field, this is because we cannot take
address of a bit-field which makes it unhandy to set member variables
when parsing the command line options.
The "git-fsck(1)" declares "fsck_options" variable with "static"
identifier which avoids complaint by the leak-checker. However, in
"git-refs verify", we need to do memory clean manually. Thus add
"fsck_options_clear" function in "fsck.c" to provide memory clean
operation.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new command that allows the user to migrate a repository
between ref storage formats. This new command is implemented as part of
a new git-refs(1) executable. This is due to two reasons:
- There is no good place to put the migration logic in existing
commands. git-maintenance(1) felt unwieldy, and git-pack-refs(1) is
not the correct place to put it, either.
- I had it in my mind to create a new low-level command for accessing
refs for quite a while already. git-refs(1) is that command and can
over time grow more functionality relating to refs. This should help
discoverability by consolidating low-level access to refs into a
single executable.
As mentioned in the preceding commit that introduces the ref storage
format migration logic, the new `git refs migrate` command still has a
bunch of restrictions. These restrictions are documented accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patrick Steinhardt