"git for-each-ref" learns '%(ahead-behind:<base>)' that computes the
distances from a single reference point in the history with bunch
of commits in bulk.
* ds/ahead-behind:
commit-reach: add tips_reachable_from_bases()
for-each-ref: add ahead-behind format atom
commit-reach: implement ahead_behind() logic
commit-graph: introduce `ensure_generations_valid()`
commit-graph: return generation from memory
commit-graph: simplify compute_generation_numbers()
commit-graph: refactor compute_topological_levels()
for-each-ref: explicitly test no matches
for-each-ref: add --stdin option
Update 'git write-tree' to allow using the sparse-index in memory
without expanding to a full one.
The recursive algorithm for update_one() was already updated in 2de37c5
(cache-tree: integrate with sparse directory entries, 2021-03-03) to
handle sparse directory entries in the index. Hence we can just set the
requires-full-index to false for "write-tree".
The `p2000` tests demonstrate a ~96% execution time reduction for 'git
write-tree' using a sparse index:
Test before after
-----------------------------------------------------------------
2000.78: git write-tree (full-v3) 0.34 0.33 -2.9%
2000.79: git write-tree (full-v4) 0.32 0.30 -6.3%
2000.80: git write-tree (sparse-v3) 0.47 0.02 -95.8%
2000.81: git write-tree (sparse-v4) 0.45 0.02 -95.6%
Signed-off-by: Shuqi Liang <cheskaqiqi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git describe compares the index with the working tree when (and only
when) it is run with the "--dirty" flag. This is done by the
run_diff_index() function. The function has been made aware of the
sparse-index in the series that led to 8d2c3732 (Merge branch
'ld/sparse-diff-blame', 2021-12-21). Hence we can just set the
requires-full-index to false for "describe".
Performance metrics
Test HEAD~1 HEAD
-------------------------------------------------------------------------------------------------
2000.2: git describe --dirty (full-v3) 0.08(0.09+0.01) 0.08(0.06+0.03) +0.0%
2000.3: git describe --dirty (full-v4) 0.09(0.07+0.03) 0.08(0.05+0.04) -11.1%
2000.4: git describe --dirty (sparse-v3) 0.88(0.82+0.06) 0.02(0.01+0.05) -97.7%
2000.5: git describe --dirty (sparse-v4) 0.68(0.60+0.08) 0.02(0.02+0.04) -97.1%
2000.6: echo >>new && git describe --dirty (full-v3) 0.08(0.04+0.05) 0.08(0.05+0.04) +0.0%
2000.7: echo >>new && git describe --dirty (full-v4) 0.08(0.07+0.03) 0.08(0.05+0.04) +0.0%
2000.8: echo >>new && git describe --dirty (sparse-v3) 0.75(0.69+0.07) 0.02(0.03+0.03) -97.3%
2000.9: echo >>new && git describe --dirty (sparse-v4) 0.81(0.73+0.09) 0.02(0.01+0.05) -97.5%
Signed-off-by: Raghul Nanth A <nanth.raghul@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This argument was added in 7cae7627c4 (builtin/grep.c: integrate with
sparse index, 2022-09-22), but it was a carry-over from an earlier
version where the --sparse flag was added to the 'git grep' builtin.
This argument does not exist, so currently the
p2000-sparse-operations.sh performance test script fails when reaching
this step.
With this fix, the script works with these numbers for my copy of the
Git source code repository:
Test HEAD
------------------------------------------------------------
2000.30: git grep --cached ... (full-v3) 0.34(1.20+0.14)
2000.31: git grep --cached ... (full-v4) 0.31(1.15+0.13)
2000.32: git grep --cached ... (sparse-v3) 0.26(1.13+0.12)
2000.33: git grep --cached ... (sparse-v4) 0.27(1.13+0.12)
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both 'git for-each-ref --merged=<X>' and 'git branch --merged=<X>' use
the ref-filter machinery to select references or branches (respectively)
that are reachable from a set of commits presented by one or more
--merged arguments. This happens within reach_filter(), which uses the
revision-walk machinery to walk history in a standard way.
However, the commit-reach.c file is full of custom searches that are
more efficient, especially for reachability queries that can terminate
early when reachability is discovered. Add a new
tips_reachable_from_bases() method to commit-reach.c and call it from
within reach_filter() in ref-filter.c. This affects both 'git branch'
and 'git for-each-ref' as tested in p1500-graph-walks.sh.
For the Linux kernel repository, we take an already-fast algorithm and
make it even faster:
Test HEAD~1 HEAD
-------------------------------------------------------------------
1500.5: contains: git for-each-ref --merged 0.13 0.02 -84.6%
1500.6: contains: git branch --merged 0.14 0.02 -85.7%
1500.7: contains: git tag --merged 0.15 0.03 -80.0%
(Note that we remove the iterative 'git rev-list' test from p1500
because it no longer makes sense as a comparison to 'git for-each-ref'
and would just waste time running it for these comparisons.)
The algorithm is implemented in commit-reach.c in the method
tips_reachable_from_base(). This method takes a string_list of tips and
assigns the 'util' for each item with the value 1 if the base commit can
reach those tips.
Like other reachability queries in commit-reach.c, the fastest way to
search for "can A reach B?" is to do a depth-first search up to the
generation number of B, preferring to explore first parents before later
parents. While we must walk all reachable commits up to that generation
number when the answer is "no", the depth-first search can answer "yes"
much faster than other approaches in most cases.
This search becomes trickier when there are multiple targets for the
depth-first search. The commits with lower generation number are more
likely to be within the history of the start commit, but we don't want
to waste time searching commits of low generation number if the commit
target with lowest generation number has already been found.
The trick here is to take the input commits and sort them by generation
number in ascending order. Track the index within this order as
min_generation_index. When we find a commit, if its index in the list is
equal to min_generation_index, then we can increase the generation
number boundary of our search to the next-lowest value in the list.
With this mechanism, the number of commits to search is minimized with
respect to the depth-first search heuristic. We will walk all commits up
to the minimum generation number of a commit that is _not_ reachable
from the start, but we will walk only the necessary portion of the
depth-first search for the reachable commits of lower generation.
Add extra tests for this behavior in t6600-test-reach.sh as the
interesting data shape of that repository can sometimes demonstrate
corner case bugs.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change implemented the ahead_behind() method, including an
algorithm to compute the ahead/behind values for a number of commit tips
relative to a number of commit bases. Now, integrate that algorithm as
part of 'git for-each-ref' hidden behind a new format atom,
ahead-behind. This naturally extends to 'git branch' and 'git tag'
builtins, as well.
This format allows specifying multiple bases, if so desired, and all
matching references are compared against all of those bases. For this
reason, failing to read a reference provided from these atoms results in
an error.
In order to translate the ahead_behind() method information to the
format output code in ref-filter.c, we must populate arrays of
ahead_behind_count structs. In struct ref_array, we store the full array
that will be passed to ahead_behind(). In struct ref_array_item, we
store an array of pointers that point to the relvant items within the
full array. In this way, we can pull all relevant ahead/behind values
directly when formatting output for a specific item. It also ensures the
lifetime of the ahead_behind_count structs matches the time that the
array is being used.
Add specific tests of the ahead/behind counts in t6600-test-reach.sh, as
it has an interesting repository shape. In particular, its merging
strategy and its use of different commit-graphs would demonstrate over-
counting if the ahead_behind() method did not already account for that
possibility.
Also add tests for the specific for-each-ref, branch, and tag builtins.
In the case of 'git tag', there are intersting cases that happen when
some of the selected tips are not commits. This requires careful logic
around commits_nr in the second loop of filter_ahead_behind(). Also, the
test in t7004 is carefully located to avoid being dependent on the GPG
prereq. It also avoids using the test_commit helper, as that will add
ticks to the time and disrupt the expected timestamps in later tag
tests.
Also add performance tests in a new p1300-graph-walks.sh script. This
will be useful for more uses in the future, but for now compare the
ahead-behind counting algorithm in 'git for-each-ref' to the naive
implementation by running 'git rev-list --count' processes for each
input.
For the Git source code repository, the improvement is already obvious:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.07(0.07+0.00)
1500.3: ahead-behind counts: git branch 0.07(0.06+0.00)
1500.4: ahead-behind counts: git tag 0.07(0.06+0.00)
1500.5: ahead-behind counts: git rev-list 1.32(1.04+0.27)
But the standard performance benchmark is the Linux kernel repository,
which demosntrates a significant improvement:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.27(0.24+0.02)
1500.3: ahead-behind counts: git branch 0.27(0.24+0.03)
1500.4: ahead-behind counts: git tag 0.28(0.27+0.01)
1500.5: ahead-behind counts: git rev-list 4.57(4.03+0.54)
The 'git rev-list' test exists in this change as a demonstration, but it
will be removed in the next change to avoid wasting time on this
comparison.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When UTF is enabled for a PCRE match, the corresponding flags are
added to the pcre2_compile() call, but PCRE2_UCP wasn't included.
This prevents extending the meaning of the character classes to
include those new valid characters and therefore result in failed
matches for expressions that rely on that extention, for ex:
$ git grep -P '\bÆvar'
Add PCRE2_UCP so that \w will include Æ and therefore \b could
correctly match the beginning of that word.
This has an impact on performance that has been estimated to be
between 20% to 40% and that is shown through the added performance
test.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'read-tree' with a single tree and no prefix,
'prime_cache_tree()' is called after the tree is unpacked. In that
situation, skip a redundant call to 'cache_tree_update()' in
'unpack_trees()' by enabling the 'skip_cache_tree_update' unpack option.
Removing the redundant cache tree update provides a substantial performance
improvement to 'git read-tree <tree-ish>', as shown by a test added to
'p0006-read-tree-checkout.sh':
Test before after
----------------------------------------------------------------------
read-tree br_ballast_plus_1 3.94(1.80+1.57) 3.00(1.14+1.28) -23.9%
Note that the 'read-tree' in 't1022-read-tree-partial-clone.sh' is updated
to read two trees, rather than one. The test was first introduced in
d3da223f22 (cache-tree: prefetch in partial clone read-tree, 2021-07-23) to
exercise the 'cache_tree_update()' code path, as used in 'git merge'. Since
this patch drops the call to 'cache_tree_update()' in single-tree 'git
read-tree', change the test to use the two-tree variant so that
'cache_tree_update()' is called as intended.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Enable the 'skip_cache_tree_update' option in the variants that call
'prime_cache_tree()' after 'unpack_trees()' (specifically, 'git reset
--mixed' and 'git reset --hard'). This avoids redundantly rebuilding the
cache tree in both 'cache_tree_update()' at the end of 'unpack_trees()' and
in 'prime_cache_tree()', resulting in a small (but consistent) performance
improvement. From the newly-added 'p7102-reset.sh' test:
Test before after
--------------------------------------------------------------------
7102.1: reset --hard (...) 2.11(0.40+1.54) 1.97(0.38+1.47) -6.6%
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Add a performance test comparing the execution times of 'prime_cache_tree()'
and 'cache_tree_update(_, WRITE_TREE_SILENT | WRITE_TREE_REPAIR)'. The goal
of comparing these two is to identify which is the faster method for
rebuilding an invalid cache tree, ultimately to remove one when both are
(reundantly) called in immediate succession.
Both methods are fast, so the new tests in 'p0090-cache-tree.sh' must call
each tested function multiple times to ensure the reported times (to 0.01s
resolution) convey the differences between them.
The tests compare the timing of a 'test-tool cache-tree' run as a no-op (to
capture a baseline for the overhead associated with running the tool),
'cache_tree_update()', and 'prime_cache_tree()' on four scenarios:
- A completely valid cache tree
- A cache tree with 2 invalid paths
- A cache tree with 50 invalid paths
- A completely empty cache tree
Example results:
Test this tree
-----------------------------------------------------------
0090.2: no-op, clean 1.27(0.48+0.52)
0090.3: prime_cache_tree, clean 2.02(0.83+0.85)
0090.4: cache_tree_update, clean 1.30(0.49+0.54)
0090.5: no-op, invalidate 2 1.29(0.48+0.54)
0090.6: prime_cache_tree, invalidate 2 1.98(0.81+0.83)
0090.7: cache_tree_update, invalidate 2 2.12(0.94+0.86)
0090.8: no-op, invalidate 50 1.32(0.50+0.55)
0090.9: prime_cache_tree, invalidate 50 2.10(0.86+0.89)
0090.10: cache_tree_update, invalidate 50 2.35(1.14+0.90)
0090.11: no-op, empty 1.33(0.50+0.54)
0090.12: prime_cache_tree, empty 2.04(0.84+0.87)
0090.13: cache_tree_update, empty 2.51(1.27+0.92)
These timings show that, while 'cache_tree_update()' is faster when the
cache tree is completely valid, it is equal to or slower than
'prime_cache_tree()' when there are any invalid paths. Since the redundant
calls are mostly in scenarios where the cache tree will be at least
partially invalid (e.g., 'git reset --hard'), 'prime_cache_tree()' will
likely perform better than 'cache_tree_update()' in typical cases.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
"git grep" learned to expand the sparse-index more lazily and on
demand in a sparse checkout.
* sy/sparse-grep:
builtin/grep.c: integrate with sparse index
Turn on sparse index and remove ensure_full_index().
Before this patch, `git-grep` utilizes the ensure_full_index() method to
expand the index and search all the entries. Because this method
requires walking all the trees and constructing the index, it is the
slow part within the whole command.
To achieve better performance, this patch uses grep_tree() to search the
sparse directory entries and get rid of the ensure_full_index() method.
Why grep_tree() is a better choice over ensure_full_index()?
1) grep_tree() is as correct as ensure_full_index(). grep_tree() looks
into every sparse-directory entry (represented by a tree) recursively
when looping over the index, and the result of doing so matches the
result of expanding the index.
2) grep_tree() utilizes pathspecs to limit the scope of searching.
ensure_full_index() always expands the index, which means it will
always walk all the trees and blobs in the repo without caring if
the user only wants a subset of the content, i.e. using a pathspec.
On the other hand, grep_tree() will only search the contents that
match the pathspec, and thus possibly walking fewer trees.
3) grep_tree() does not construct and copy back a new index, while
ensure_full_index() does. This also saves some time.
----------------
Performance test
- Summary:
p2000 tests demonstrate a ~71% execution time reduction for
`git grep --cached bogus -- "f2/f1/f1/*"` using tree-walking logic.
However, notice that this result varies depending on the pathspec
given. See below "Command used for testing" for more details.
Test HEAD~ HEAD
-------------------------------------------------------
2000.78: git grep ... (full-v3) 0.35 0.39 (≈)
2000.79: git grep ... (full-v4) 0.36 0.30 (≈)
2000.80: git grep ... (sparse-v3) 0.88 0.23 (-73.8%)
2000.81: git grep ... (sparse-v4) 0.83 0.26 (-68.6%)
- Command used for testing:
git grep --cached bogus -- "f2/f1/f1/*"
The reason for specifying a pathspec is that, if we don't specify a
pathspec, then grep_tree() will walk all the trees and blobs to find the
pattern, and the time consumed doing so is not too different from using
the original ensure_full_index() method, which also spends most of the
time walking trees. However, when a pathspec is specified, this latest
logic will only walk the area of trees enclosed by the pathspec, and the
time consumed is reasonably a lot less.
Generally speaking, because the performance gain is acheived by walking
less trees, which are specified by the pathspec, the HEAD time v.s.
HEAD~ time in sparse-v[3|4], should be proportional to
"pathspec enclosed area" v.s. "all area", respectively. Namely, the
wider the <pathspec> is encompassing, the less the performance
difference between HEAD~ and HEAD, and vice versa.
That is, if we don't specify a pathspec, the performance difference [1]
is indistinguishable: both methods walk all the trees and take generally
same amount of time (even with the index construction time included for
ensure_full_index()).
[1] Performance test result without pathspec (hence walking all trees):
Command used:
git grep --cached bogus
Test HEAD~ HEAD
---------------------------------------------------
2000.78: git grep ... (full-v3) 6.17 5.19 (≈)
2000.79: git grep ... (full-v4) 6.19 5.46 (≈)
2000.80: git grep ... (sparse-v3) 6.57 6.44 (≈)
2000.81: git grep ... (sparse-v4) 6.65 6.28 (≈)
--------------------------
NEEDSWORK about submodules
There are a few NEEDSWORKs that belong to improvements beyond this
topic. See the NEEDSWORK in builtin/grep.c::grep_submodule() for
more context. The other two NEEDSWORKs in t1092 are also relative.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Despite POSIX states that:
> The old egrep and fgrep commands are likely to be supported for many
> years to come as implementation extensions, allowing historical
> applications to operate unmodified.
GNU grep 3.8 started to warn[1]:
> The egrep and fgrep commands, which have been deprecated since
> release 2.5.3 (2007), now warn that they are obsolescent and should
> be replaced by grep -E and grep -F.
Prepare for their removal in the future.
[1]: https://lists.gnu.org/archive/html/info-gnu/2022-09/msg00001.html
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hoist the remainder of "scalar" out of contrib/ to the main part of
the codebase.
* vd/scalar-to-main:
Documentation/technical: include Scalar technical doc
t/perf: add 'GIT_PERF_USE_SCALAR' run option
t/perf: add Scalar performance tests
scalar-clone: add test coverage
scalar: add to 'git help -a' command list
scalar: implement the `help` subcommand
git help: special-case `scalar`
scalar: include in standard Git build & installation
scalar: fix command documentation section header
The pack bitmap file gained a bitmap-lookup table to speed up
locating the necessary bitmap for a given commit.
* ac/bitmap-lookup-table:
pack-bitmap-write: drop unused pack_idx_entry parameters
bitmap-lookup-table: add performance tests for lookup table
pack-bitmap: prepare to read lookup table extension
pack-bitmap-write: learn pack.writeBitmapLookupTable and add tests
pack-bitmap-write.c: write lookup table extension
bitmap: move `get commit positions` code to `bitmap_writer_finish`
Documentation/technical: describe bitmap lookup table extension
Add a 'GIT_PERF_USE_SCALAR' environment variable (and corresponding perf
config 'useScalar') to register a repository created with any of:
* test_perf_fresh_repo
* test_perf_default_repo
* test_perf_large_repo
as a Scalar enlistment. This is intended to allow a developer to test the
impact of Scalar on already-defined performance scenarios.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create 'p9210-scalar.sh' for testing Scalar performance and comparing
performance of Git operations in Scalar registrations and standard
repositories. Example results:
Test this tree
------------------------------------------------------------------------
9210.2: scalar clone 14.82(18.00+3.63)
9210.3: git clone 26.15(36.67+6.90)
9210.4: git status (scalar) 0.04(0.01+0.01)
9210.5: git status (non-scalar) 0.10(0.02+0.11)
9210.6: test_commit --append --no-tag A (scalar) 0.08(0.02+0.03)
9210.7: test_commit --append --no-tag A (non-scalar) 0.13(0.03+0.11)
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix broken "&&-" chains and failures in early iterations of a loop.
* es/fix-chained-tests:
t5329: notice a failure within a loop
t: detect and signal failure within loop
t1092: fix buggy sparse "blame" test
t2407: fix broken &&-chains in compound statement
Add performance tests to verify the performance of lookup table.
`p5310-pack-bitmaps.sh` contain tests with and without lookup table.
`p5312-pack-bitmaps-revs.sh` contain same tests with and without
lookup table but with `pack.writeReverseIndex` enabled.
Lookup table makes Git run faster in most of the cases. Below is the
result of `t/perf/p5310-pack-bitmaps.sh`.`perf/p5326-multi-pack-bitmaps.sh`
gives similar result. The repository used in the test is linux kernel.
Test this tree
-----------------------------------------------------------------------
5310.4: enable lookup table: false 0.01(0.00+0.00)
5310.5: repack to disk 320.89(230.20+23.45)
5310.6: simulated clone 14.04(5.78+1.79)
5310.7: simulated fetch 1.95(3.05+0.20)
5310.8: pack to file (bitmap) 44.73(20.55+7.45)
5310.9: rev-list (commits) 0.78(0.46+0.10)
5310.10: rev-list (objects) 4.07(3.97+0.08)
5310.11: rev-list with tag negated via --not 0.06(0.02+0.03)
--all (objects)
5310.12: rev-list with negative tag (objects) 0.21(0.15+0.05)
5310.13: rev-list count with blob:none 0.24(0.17+0.06)
5310.14: rev-list count with blob:limit=1k 7.07(5.92+0.48)
5310.15: rev-list count with tree:0 0.25(0.17+0.07)
5310.16: simulated partial clone 5.67(3.28+0.64)
5310.18: clone (partial bitmap) 16.05(8.34+1.86)
5310.19: pack to file (partial bitmap) 59.76(27.22+7.43)
5310.20: rev-list with tree filter (partial bitmap) 0.90(0.18+0.16)
5310.24: enable lookup table: true 0.01(0.00+0.00)
5310.25: repack to disk 319.73(229.30+23.01)
5310.26: simulated clone 13.69(5.72+1.78)
5310.27: simulated fetch 1.84(3.02+0.16)
5310.28: pack to file (bitmap) 45.63(20.67+7.50)
5310.29: rev-list (commits) 0.56(0.39+0.8)
5310.30: rev-list (objects) 3.77(3.74+0.08)
5310.31: rev-list with tag negated via --not 0.05(0.02+0.03)
--all (objects)
5310.32: rev-list with negative tag (objects) 0.21(0.15+0.05)
5310.33: rev-list count with blob:none 0.23(0.17+0.05)
5310.34: rev-list count with blob:limit=1k 6.65(5.72+0.40)
5310.35: rev-list count with tree:0 0.23(0.16+0.06)
5310.36: simulated partial clone 5.57(3.26+0.59)
5310.38: clone (partial bitmap) 15.89(8.39+1.84)
5310.39: pack to file (partial bitmap) 58.32(27.55+7.47)
5310.40: rev-list with tree filter (partial bitmap) 0.73(0.18+0.15)
Test 4-15 are tested without using lookup table. Same tests are
repeated in 16-30 (using lookup table).
Mentored-by: Taylor Blau <me@ttaylorr.com>
Co-Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the 'p0006' test "read-tree br_base br_ballast", move the '-n' flag used
in 'git read-tree' ahead of its positional arguments.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix multi-threaded 'p0004' test's use of the 'REPO_BIG_ENOUGH_FOR_MULTI'
prerequisite. Unlike normal 't/' tests, 't/perf/' tests need to have their
prerequisites declared with the '--prereq' flag.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable the sparse index within the `git-rm` command.
The `p2000` tests demonstrate a ~92% execution time reduction for
'git rm' using a sparse index.
Test HEAD~1 HEAD
--------------------------------------------------------------------------
2000.74: git rm ... (full-v3) 0.41(0.37+0.05) 0.43(0.36+0.07) +4.9%
2000.75: git rm ... (full-v4) 0.38(0.34+0.05) 0.39(0.35+0.05) +2.6%
2000.76: git rm ... (sparse-v3) 0.57(0.56+0.01) 0.05(0.05+0.00) -91.2%
2000.77: git rm ... (sparse-v4) 0.57(0.55+0.02) 0.03(0.03+0.00) -94.7%
----
Also, normalize a behavioral difference of `git-rm` under sparse-index.
See related discussion [1].
`git-rm` a sparse-directory entry within a sparse-index enabled repo
behaves differently from a sparse directory within a sparse-checkout
enabled repo.
For example, in a sparse-index repo, where 'folder1' is a
sparse-directory entry, `git rm -r --sparse folder1` provides this:
rm 'folder1/'
Whereas in a sparse-checkout repo *without* sparse-index, doing so
provides this:
rm 'folder1/0/0/0'
rm 'folder1/0/1'
rm 'folder1/a'
Because `git rm` a sparse-directory entry does not need to expand the
index, therefore we should accept the current behavior, which is faster
than "expand the sparse-directory entry to match the sparse-checkout
situation".
Modify a previous test so such difference is not considered as an error.
[1] https://github.com/ffyuanda/git/pull/6#discussion_r934861398
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make our mergesort implementation type-safe.
* rs/mergesort:
mergesort: remove llist_mergesort()
packfile: use DEFINE_LIST_SORT
fetch-pack: use DEFINE_LIST_SORT
commit: use DEFINE_LIST_SORT
blame: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT_DEBUG
mergesort: add macros for typed sort of linked lists
mergesort: tighten merge loop
mergesort: unify ranks loops
Build a typed sort function for the mergesort performance test tool
using DEFINE_LIST_SORT instead of calling llist_mergesort(). This gets
rid of the next pointer accessor functions and improves the performance
at the cost of a slightly higher object text size.
Before:
0071.12: llist_mergesort() unsorted 0.24(0.22+0.01)
0071.14: llist_mergesort() sorted 0.12(0.10+0.01)
0071.16: llist_mergesort() reversed 0.12(0.10+0.01)
__TEXT __DATA __OBJC others dec hex
6407 276 0 24701 31384 7a98 t/helper/test-mergesort.o
With this patch:
0071.12: DEFINE_LIST_SORT unsorted 0.22(0.21+0.01)
0071.14: DEFINE_LIST_SORT sorted 0.11(0.10+0.01)
0071.16: DEFINE_LIST_SORT reversed 0.11(0.10+0.01)
__TEXT __DATA __OBJC others dec hex
6615 276 0 25832 32723 7fd3 t/helper/test-mergesort.o
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5dccd9155f (t/perf: add iteration setup mechanism to perf-lib,
2022-04-04) modified the parameter parsing of test_wrapper() such that
the test title was no longer in $1, and is instead in $test_title_.
We correctly pass the new variable to the code which outputs the title
to the log, but missed the spot in test_wrapper() where the title is
written to the ".descr" file which is used to produce the final output
table. As a result, all of the titles are missing from that table (or
worse, using whatever was left in $1):
$ ./p0000-perf-lib-sanity.sh
[...]
Test this tree
------------------------------
0000.1: 0.01(0.01+0.00)
0000.2: 0.01(0.00+0.01)
0000.4: 0.00(0.00+0.00)
0000.5: true 0.00(0.00+0.00)
0000.7: 0.00(0.00+0.00)
0000.8: 0.00(0.00+0.00)
After this patch, we get the pre-5dccd9155f output:
Test this tree
--------------------------------------------------------------------------
0000.1: test_perf_default_repo works 0.00(0.00+0.00)
0000.2: test_checkout_worktree works 0.01(0.00+0.01)
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
0000.8: test-lib-functions correctly loaded in subshells 0.00(0.00+0.00)
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
"sparse-checkout" learns to work well with the sparse-index
feature.
* ds/sparse-sparse-checkout:
sparse-checkout: integrate with sparse index
p2000: add test for 'git sparse-checkout [add|set]'
sparse-index: complete partial expansion
sparse-index: partially expand directories
sparse-checkout: --no-sparse-index needs a full index
cache-tree: implement cache_tree_find_path()
sparse-index: introduce partially-sparse indexes
sparse-index: create expand_index()
t1092: stress test 'git sparse-checkout set'
t1092: refactor 'sparse-index contents' test
Introduce a filesystem-dependent mechanism to optimize the way the
bits for many loose object files are ensured to hit the disk
platter.
* ns/batch-fsync:
core.fsyncmethod: performance tests for batch mode
t/perf: add iteration setup mechanism to perf-lib
core.fsyncmethod: tests for batch mode
test-lib-functions: add parsing helpers for ls-files and ls-tree
core.fsync: use batch mode and sync loose objects by default on Windows
unpack-objects: use the bulk-checkin infrastructure
update-index: use the bulk-checkin infrastructure
builtin/add: add ODB transaction around add_files_to_cache
cache-tree: use ODB transaction around writing a tree
core.fsyncmethod: batched disk flushes for loose-objects
bulk-checkin: rebrand plug/unplug APIs as 'odb transactions'
bulk-checkin: rename 'state' variable and separate 'plugged' boolean
The sparse-checkout builtin is almost completely integrated with the
sparse index, allowing the sparse-checkout boundary to be modified
without expanding a sparse index to a full one. Add a test to
p2000-sparse-operations.sh that adds a directory to the sparse-checkout
definition, then removes it. Using both operations is important to
ensure that the operation is doing the same work in each repetition as
well as leaving the test repo in a good state for later tests.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests verifying expected 'git stash' behavior in
't1092-sparse-checkout-compatibility'. These cases establish the expected
behavior of 'git stash' in a sparse-checkout and verify consistency both
with and without a sparse index. Although no sparse index compatibility has
been integrated into 'git stash' yet, the tests are all 'expect_success' -
we don't want the cone-mode sparse-checkout behavior to change depending on
whether it is using a sparse index or not. Therefore, we expect these tests
to continue passing once sparse index is integrated with 'git stash'.
Additionally, add performance test cases for 'git stash' both with and
without untracked files. Note that, unlike the other tests in
'p2000-sparse-operations.sh', the tests added for 'stash' are combination
operations. This is done to ensure the stash/unstash is not blocked by the
modification of '$SPARSE_CONE/a' performed as part of 'test_perf_on_all'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests that affect the repo in stateful ways are easier to write if we
can run setup steps outside of the measured portion of perf iteration.
This change adds a "--setup 'setup-script'" parameter to test_perf. To
make invocations easier to understand, I also moved the prerequisites to
a new --prereq parameter.
The setup facility will be used in the upcoming perf tests for batch
mode, but it already helps in some existing tests, like t5302 and t7820.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add basic performance tests for git commands that can add data to the
object database. We cover:
* git add
* git stash
* git update-index (via git stash)
* git unpack-objects
* git commit --all
We cover all currently available fsync methods as well.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
Repeat all of the fsmonitor perf tests using `git fsmonitor--daemon` and
the "Simple IPC" interface.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change p7519 to use `test_seq` and `xargs` rather than a `for` loop
to touch thousands of files. This takes minutes off of test runs
on Windows because of process creation overhead.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not copy any of the various fsmonitor--daemon files from the .git
directory of the (GIT_PREF_REPO or GIT_PERF_LARGE_REPO) source repo
into the test's trash directory.
When perf tests start, they copy the contents of the source repo into
the test's trash directory. If fsmonitor is running in the source repo,
there may be control files, such as the IPC socket and/or fsmonitor
cookie files. These should not be copied into the test repo.
Unix domain sockets cannot be copied in the manner used by the test
setup, so if present, the test setup fails.
Cookie files are harmless, but we should avoid them.
The builtin fsmonitor keeps all such control files/sockets in
.git/fsmonitor--daemon*, so it is simple to exclude them.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize away strbuf_expand() call with a hardcoded formatting logic
specific for the default format in the --batch and --batch-check
options of "git cat-file".
* jc/cat-file-batch-default-format-optim:
cat-file: skip expanding default format
"git read-tree" has been made to be aware of the sparse-index
feature.
* vd/sparse-read-tree:
read-tree: make three-way merge sparse-aware
read-tree: make two-way merge sparse-aware
read-tree: narrow scope of index expansion for '--prefix'
read-tree: integrate with sparse index
read-tree: expand sparse checkout test coverage
read-tree: explicitly disallow prefixes with a leading '/'
status: fix nested sparse directory diff in sparse index
sparse-index: prevent repo root from becoming sparse
When format is passed into --batch, --batch-check, --batch-command,
the format gets expanded. When nothing is passed in, the default format
is set and the expand_format() gets called.
We can save on these cycles by hardcoding how to print the
information when nothing is passed as the format, or when the default
format is passed. There is no need for the fully expanded format with
the default. Since batch_object_write() happens on every object provided
in batch mode, we get a nice performance improvement.
git rev-list --all > /tmp/all-obj.txt
git cat-file --batch-check </tmp/all-obj.txt
with HEAD^:
Time (mean ± σ): 57.6 ms ± 1.7 ms [User: 51.5 ms, System: 6.2 ms]
Range (min … max): 54.6 ms … 64.7 ms 50 runs
with HEAD:
Time (mean ± σ): 49.8 ms ± 1.7 ms [User: 42.6 ms, System: 7.3 ms]
Range (min … max): 46.9 ms … 55.9 ms 56 runs
If nothing is provided as a format argument, or if the default format is
passed, skip expanding of the format and print the object info with a
default format.
See https://lore.kernel.org/git/87eecf8ork.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have various behavior that's shared across our Makefiles, or that
really should be (e.g. via defined templates). Let's create a
top-level "shared.mak" to house those sorts of things, and start by
adding the ".DELETE_ON_ERROR" flag to it.
See my own 7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) and db10fc6c09 (doc: simplify Makefile using
.DELETE_ON_ERROR, 2021-05-21) for the addition and use of the
".DELETE_ON_ERROR" flag.
I.e. this changes the behavior of existing rules in the altered
Makefiles (except "Makefile" & "Documentation/Makefile"). I'm
confident that this is safe having read the relevant rules in those
Makfiles, and as the GNU make manual notes that it isn't the default
behavior is out of an abundance of backwards compatibility
caution. From edition 0.75 of its manual, covering GNU make 4.3:
[Enabling '.DELETE_ON_ERROR' is] almost always what you want
'make' to do, but it is not historical practice; so for
compatibility, you must explicitly request it.
This doesn't introduce a bug by e.g. having this
".DELETE_ON_ERROR" flag only apply to this new shared.mak, Makefiles
have no such scoping semantics.
It does increase the danger that any Makefile without an explicit "The
default target of this Makefile is..." snippet to define the default
target as "all" could have its default rule changed if our new
shared.mak ever defines a "real" rule. In subsequent commits we'll be
careful not to do that, and such breakage would be obvious e.g. in the
case of "make -C t".
We might want to make that less fragile still (e.g. by using
".DEFAULT_GOAL" as noted in the preceding commit), but for now let's
simply include "shared.mak" without adding that boilerplate to all the
Makefiles that don't have it already. Most of those are already
exposed to that potential caveat e.g. due to including "config.mak*".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests focused on how 'git read-tree' behaves in sparse checkouts. Extra
emphasis is placed on interactions with files outside the sparse cone, e.g.
merges with out-of-cone conflicts.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index", "git checkout-index", and "git clean" are
taught to work better with the sparse checkout feature.
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
Introduce tests for a variety of `git update-index` use cases, including
performance scenarios. Tests are intended to exercise `update-index` with
options that change the commands interaction with the index (e.g.,
`--again`) and with files/directories inside and outside a sparse checkout
cone.
Of note is that these tests clearly establish the behavior of `git
update-index --add` with untracked, outside-of-cone files. Unlike `git add`,
which fails with an error when provided with such files, `update-index`
succeeds in adding them to the index. Additionally, the `skip-worktree` flag
is *not* automatically added to the new entry. Although this is pre-existing
behavior, there are a couple of reasons to avoid changing it in favor of
consistency with e.g. `git add`:
* `update-index` is low-level command for modifying the index; while it can
perform operations similar to those of `add`, it traditionally has fewer
"guardrails" preventing a user from doing something they may not want to
do (in this case, adding an outside-of-cone, non-`skip-worktree` file to
the index)
* `update-index` typically only exits with an error code if it is incapable
of performing an operation (e.g., if an internal function call fails);
adding a new file outside the sparse checkout definition is still a valid
operation, albeit an inadvisable one
* `update-index` does not implicitly set flags (e.g., `skip-worktree`) when
creating new index entries with `--add`; if flags need to be updated,
options like `--[no-]skip-worktree` allow a user to intentionally set them
All this to say that, while there are valid reasons to consider changing the
treatment of outside-of-cone files in `update-index`, there are also
sufficient reasons for leaving it as-is.
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to cover `checkout-index`, with a focus on cases interesting in a
sparse checkout (e.g., files specified outside sparse checkout definition).
New tests are intended to serve as a baseline for existing and/or expected
behavior and performance when integrating `checkout-index` with the sparse
index. Note that the test 'checkout-index --all' is marked as
'test_expect_failure', indicating that `update-index --all` will be modified
in a subsequent patch to behave as the test expects.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perf tests were run with end-user's shell, but it has been
corrected to use the shell specified by $TEST_SHELL_PATH.
* ja/perf-use-specified-shell:
t/perf: do not run tests in user's $SHELL
Correctness and performance update to "diff --color-moved" feature.
* pw/diff-color-moved-fix:
diff --color-moved: intern strings
diff: use designated initializers for emitted_diff_symbol
diff --color-moved-ws=allow-indentation-change: improve hash lookups
diff --color-moved: stop clearing potential moved blocks
diff --color-moved: shrink potential moved blocks as we go
diff --color-moved: unify moved block growth functions
diff --color-moved: call comparison function directly
diff --color-moved-ws=allow-indentation-change: simplify and optimize
diff: simplify allow-indentation-change delta calculation
diff --color-moved: avoid false short line matches and bad zebra coloring
diff --color-moved=zebra: fix alternate coloring
diff --color-moved: rewind when discarding pmb
diff --color-moved: factor out function
diff --color-moved: clear all flags on blocks that are too short
diff --color-moved: add perf tests
Broken &&-chains in the test scripts have been corrected.
* es/test-chain-lint:
t6000-t9999: detect and signal failure within loop
t5000-t5999: detect and signal failure within loop
t4000-t4999: detect and signal failure within loop
t0000-t3999: detect and signal failure within loop
tests: simplify by dropping unnecessary `for` loops
tests: apply modern idiom for exiting loop upon failure
tests: apply modern idiom for signaling test failure
tests: fix broken &&-chains in `{...}` groups
tests: fix broken &&-chains in `$(...)` command substitutions
tests: fix broken &&-chains in compound statements
tests: use test_write_lines() to generate line-oriented output
tests: simplify construction of large blocks of text
t9107: use shell parameter expansion to avoid breaking &&-chain
t6300: make `%(raw:size) --shell` test more robust
t5516: drop unnecessary subshell and command invocation
t4202: clarify intent by creating expected content less cleverly
t1020: avoid aborting entire test script when one test fails
t1010: fix unnoticed failure on Windows
t/lib-pager: use sane_unset() to avoid breaking &&-chain
The environment variable $SHELL is usually set to the user's
interactive shell. Our build and test scripts never use $SHELL because
there are no guarantees about its input language. Instead, we use
/bin/sh which should be a POSIX shell.
For systems with a broken /bin/sh, we allow to override that path via
SHELL_PATH. To run tests in yet another shell we allow to override
SHELL_PATH with TEST_SHELL_PATH.
Perf tests run in $SHELL via a wrapper defined in t/perf/perf-lib.sh,
so they break with e.g. SHELL=python. Use TEST_SHELL_PATH like
in other tests. TEST_SHELL_PATH is always defined because
t/perf/perf-lib.sh includes t/test-lib.sh, which includes
GIT-BUILD-OPTIONS.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach diff and blame to work well with sparse index.
* ld/sparse-diff-blame:
blame: enable and test the sparse index
diff: enable and test the sparse index
diff: replace --staged with --cached in t1092 tests
repo-settings: prepare_repo_settings only in git repos
test-read-cache: set up repo after git directory
commit-graph: return if there is no git directory
git: ensure correct git directory setup with -h
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top-level &&-chain checker built into t/test-lib.sh causes tests to
magically exit with code 117 if the &&-chain is broken. However, it has
the shortcoming that the magic does not work within `{...}` groups,
`(...)` subshells, `$(...)` substitutions, or within bodies of compound
statements, such as `if`, `for`, `while`, `case`, etc. `chainlint.sed`
partly fills in the gap by catching broken &&-chains in `(...)`
subshells, but bugs can still lurk behind broken &&-chains in the other
cases.
Fix broken &&-chains in compound statements in order to reduce the
number of possible lurking bugs.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various operating modes of "git reset" have been made to work
better with the sparse index.
* vd/sparse-reset:
unpack-trees: improve performance of next_cache_entry
reset: make --mixed sparse-aware
reset: make sparse-aware (except --mixed)
reset: integrate with sparse index
reset: expand test coverage for sparse checkouts
sparse-index: update command for expand/collapse test
reset: preserve skip-worktree bit in mixed reset
reset: rename is_missing to !is_in_reset_tree
Add some tests so we can monitor changes to the performance of the
move detection code. The tests record the performance --color-moved
and --color-moved-ws=allow-indentation-change for a large diff and a
sequence of smaller diffs. The range of commits used for the large
diff can be customized by exporting TEST_REV_A and TEST_REV_B when
running the test.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable the sparse index for the 'git blame' command. The index was already
not expanded with this command, so the most interesting thing to do is to
add tests that verify that 'git blame' behaves correctly when the sparse
index is enabled and that its performance improves. More specifically, these
cases are:
1. The index is not expanded for 'blame' when given paths in the sparse
checkout cone at multiple levels.
2. Performance measurably improves for 'blame' with sparse index when given
paths in the sparse checkout cone at multiple levels.
The `p2000` tests demonstrate a ~60% execution time reduction when running
'blame' for a file two levels deep and and a ~30% execution time reduction
for a file three levels deep.
Test before after
----------------------------------------------------------------
2000.62: git blame f2/f4/a (full-v3) 0.31 0.32 +3.2%
2000.63: git blame f2/f4/a (full-v4) 0.29 0.31 +6.9%
2000.64: git blame f2/f4/a (sparse-v3) 0.55 0.23 -58.2%
2000.65: git blame f2/f4/a (sparse-v4) 0.57 0.23 -59.6%
2000.66: git blame f2/f4/f3/a (full-v3) 0.77 0.85 +10.4%
2000.67: git blame f2/f4/f3/a (full-v4) 0.78 0.81 +3.8%
2000.68: git blame f2/f4/f3/a (sparse-v3) 1.07 0.72 -32.7%
2000.99: git blame f2/f4/f3/a (sparse-v4) 1.05 0.73 -30.5%
We do not include paths outside the sparse checkout cone because blame
does not support blaming files that are not present in the working
directory. This is true in both sparse and full checkouts.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable the sparse index within the 'git diff' command. Its implementation
already safely integrates with the sparse index because it shares code
with the 'git status' and 'git checkout' commands that were already
integrated. For more details see:
d76723ee53 (status: use sparse-index throughout, 2021-07-14)
1ba5f45132 (checkout: stop expanding sparse indexes, 2021-06-29)
The most interesting thing to do is to add tests that verify that 'git
diff' behaves correctly when the sparse index is enabled. These cases are:
1. The index is not expanded for 'diff' and 'diff --staged'
2. 'diff' and 'diff --staged' behave the same in full checkout, sparse
checkout, and sparse index repositories in the following partially-staged
scenarios (i.e. the index, HEAD, and working directory differ at a given
path):
1. Path is within sparse-checkout cone
2. Path is outside sparse-checkout cone
3. A merge conflict exists for paths outside sparse-checkout cone
The `p2000` tests demonstrate a ~44% execution time reduction for 'git
diff' and a ~86% execution time reduction for 'git diff --staged' using a
sparse index:
Test before after
-------------------------------------------------------------
2000.30: git diff (full-v3) 0.33 0.34 +3.0%
2000.31: git diff (full-v4) 0.33 0.35 +6.1%
2000.32: git diff (sparse-v3) 0.53 0.31 -41.5%
2000.33: git diff (sparse-v4) 0.54 0.29 -46.3%
2000.34: git diff --cached (full-v3) 0.07 0.07 +0.0%
2000.35: git diff --cached (full-v4) 0.07 0.08 +14.3%
2000.36: git diff --cached (sparse-v3) 0.28 0.04 -85.7%
2000.37: git diff --cached (sparse-v4) 0.23 0.03 -87.0%
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* vd/sparse-reset:
unpack-trees: improve performance of next_cache_entry
reset: make --mixed sparse-aware
reset: make sparse-aware (except --mixed)
reset: integrate with sparse index
reset: expand test coverage for sparse checkouts
sparse-index: update command for expand/collapse test
reset: preserve skip-worktree bit in mixed reset
reset: rename is_missing to !is_in_reset_tree
Add new tests for `--merge` and `--keep` modes, as well as mixed reset with
pathspecs. New performance test cases exercise various execution paths for
`reset`.
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid performance measurements from getting ruined by gc and other
housekeeping pauses interfering in the middle.
* rs/disable-gc-during-perf-tests:
perf: disable automatic housekeeping
The mergesort implementation used to sort linked list has been
optimized.
* rs/mergesort:
test-mergesort: use repeatable random numbers
mergesort: use ranks stack
p0071: test performance of llist_mergesort()
p0071: measure sorting of already sorted and reversed files
test-mergesort: add unriffle_skewed mode
test-mergesort: add unriffle mode
test-mergesort: add generate subcommand
test-mergesort: add test subcommand
test-mergesort: add sort subcommand
test-mergesort: use strbuf_getline()
Turn off automatic background maintenance for perf tests by default to
avoid interference with performance measurements. Do that by using the
new file t/perf/config and using it as the system config file for perf
tests. Future tests intended to measure gc performance can override
the setting locally or call "git gc" explicitly.
This fixes a breakage in p2000 caused by gc automatically emptying the
reflog due its fake dates from 2005 being older than 90 days.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git multi-pack-index write --bitmap" learns to propagate the
hashcache from original bitmap to resulting bitmap.
* tb/midx-write-propagate-namehash:
t5326: test propagating hashcache values
p5326: generate pack bitmaps before writing the MIDX bitmap
p5326: don't set core.multiPackIndex unnecessarily
p5326: create missing 'perf-tag' tag
midx.c: respect 'pack.writeBitmapHashcache' when writing bitmaps
pack-bitmap.c: propagate namehash values from existing bitmaps
t/helper/test-bitmap.c: add 'dump-hashes' mode
Teach test_perf_() to remove the temporary test_times.* files
at the end of each test.
test_perf_() runs a particular GIT_PERF_REPEAT_COUNT times and creates
./test_times.[123...]. It then uses a perl script to find the minimum
over "./test_times.*" (note the wildcard) and writes that time to
"test-results/<testname>.<testnumber>.result".
If the repeat count is changed during the pXXXX test script, stale
test_times.* files (from previous steps) may be included in the min()
computation. For example:
...
GIT_PERF_REPEAT_COUNT=3 \
test_perf "status" "
git status
"
GIT_PERF_REPEAT_COUNT=1 \
test_perf "checkout other" "
git checkout other
"
...
The time reported in the summary for "XXXX.2 checkout other" would
be "min( checkout[1], status[2], status[3] )".
We prevent that error by removing the test_times.* files at the end of
each test.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using `test_size` with `wc -c`, users on certain platforms can run
into issues when `wc` emits leading space characters in its output,
which confuses get_times.
Callers could switch to use test_file_size instead of `wc -c` (the
former never prints leading space characters, so will always work with
test_size regardless of platform), but this is an easy enough spot to
miss that we should teach get_times to be more tolerant of the input it
accepts.
Teach get_times to do just that by stripping any leading space
characters.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b3dfeebb92 (rebase: avoid computing unnecessary patch IDs, 2016-07-29)
added a perf test that calls tac(1) from GNU core utilities. Support
systems without it by reversing the generated list using sort -nr
instead. sort(1) with options -n and -r is already used in other tests.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if sorting takes advantage of already sorted or reversed content,
or if that corner case actually decreases performance, like it would for
a simplistic quicksort implementation.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_TEST_INSTALLED was moved from perf-lib.sh to run in df0f5021
(perf-lib.sh: remove GIT_TEST_INSTALLED from perf-lib.sh, 2019-05-07)
and that included a change to how it inspected the existence of a
bin-wrappers directory. However, that included a typo that made the
match of bin-wrappers never work. Specifically, the assignment was
mydir_abs_wrappers="$mydir_abs_wrappers/bin-wrappers"
which uses the same variable before it is initialized. By changing it to
mydir_abs_wrappers="$mydir_abs/bin-wrappers"
We can correctly use the bin-wrappers directory.
This is critical to successfully computing performance of commands that
execute subcommands. The bin-wrappers ensure that the --exec-path is set
correctly.
Reported-by: Victoria Dye <vdye@github.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To help test the performance of permuting the contents of the hash-cache
when generating a MIDX bitmap, we need a bitmap which has its hash-cache
populated.
And since multi-pack bitmaps don't add *new* values to the hash-cache,
we have to rely on a single-pack bitmap to generate those values for us.
Therefore, generate a pack bitmap before the MIDX one in order to ensure
that the MIDX bitmap has entries in its hash-cache. Since we don't want
to time generating the pack bitmap, move that to a non-perf test run
before we try to generate the MIDX bitmap.
Likewise, get rid of the pack bitmap afterwords, to make certain that we
are not accidentally using it in the performance tests run later on.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this performance test was originally written, `core.multiPackIndex`
was not the default and thus had to be enabled. But now that we have
18e449f86b (midx: enable core.multiPackIndex by default, 2020-09-25), we
no longer need this.
Drop the unnecessary setup (even though it's not hurting anything, it is
unnecessary at best and confusing at worst).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the tests in test_full_bitmap rely on having a tag named
perf-tag in place. We could create it in test_full_bitmap(), but we want
to have it in place before the repack starts.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These new performance tests demonstrate effectively the same behavior as
p5310, but use a multi-pack bitmap instead of a single-pack one.
Notably, p5326 does not create a MIDX bitmap with multiple packs. This
is so we can measure a direct comparison between it and p5310. Any
difference between the two is measuring just the overhead of using MIDX
bitmaps.
Here are the results of p5310 and p5326 together, measured at the same
time and on the same machine (using a Xenon W-2255 CPU):
Test HEAD
------------------------------------------------------------------------
5310.2: repack to disk 96.78(93.39+11.33)
5310.3: simulated clone 9.98(9.79+0.19)
5310.4: simulated fetch 1.75(4.26+0.19)
5310.5: pack to file (bitmap) 28.20(27.87+8.70)
5310.6: rev-list (commits) 0.41(0.36+0.05)
5310.7: rev-list (objects) 1.61(1.54+0.07)
5310.8: rev-list count with blob:none 0.25(0.21+0.04)
5310.9: rev-list count with blob:limit=1k 2.65(2.54+0.10)
5310.10: rev-list count with tree:0 0.23(0.19+0.04)
5310.11: simulated partial clone 4.34(4.21+0.12)
5310.13: clone (partial bitmap) 11.05(12.21+0.48)
5310.14: pack to file (partial bitmap) 31.25(34.22+3.70)
5310.15: rev-list with tree filter (partial bitmap) 0.26(0.22+0.04)
versus the same tests (this time using a multi-pack index):
Test HEAD
------------------------------------------------------------------------
5326.2: setup multi-pack index 78.99(75.29+11.58)
5326.3: simulated clone 11.78(11.56+0.22)
5326.4: simulated fetch 1.70(4.49+0.13)
5326.5: pack to file (bitmap) 28.02(27.72+8.76)
5326.6: rev-list (commits) 0.42(0.36+0.06)
5326.7: rev-list (objects) 1.65(1.58+0.06)
5326.8: rev-list count with blob:none 0.26(0.21+0.05)
5326.9: rev-list count with blob:limit=1k 2.97(2.86+0.10)
5326.10: rev-list count with tree:0 0.25(0.20+0.04)
5326.11: simulated partial clone 5.65(5.49+0.16)
5326.13: clone (partial bitmap) 12.22(13.43+0.38)
5326.14: pack to file (partial bitmap) 30.05(31.57+7.25)
5326.15: rev-list with tree filter (partial bitmap) 0.24(0.20+0.04)
There is slight overhead in "simulated clone", "simulated partial
clone", and "clone (partial bitmap)". Unsurprisingly, that overhead is
due to using the MIDX's reverse index to map between bit positions and
MIDX positions.
This can be reproduced by running "git repack -adb" along with "git
multi-pack-index write --bitmap" in a large-ish repository. Then run:
$ perf record -o pack.perf git -c core.multiPackIndex=false \
pack-objects --all --stdout >/dev/null </dev/null
$ perf record -o midx.perf git -c core.multiPackIndex=true \
pack-objects --all --stdout >/dev/null </dev/null
and compare the two with "perf diff -c delta -o 1 pack.perf midx.perf".
The most notable results are below (the next largest positive delta is
+0.14%):
# Event 'cycles'
#
# Baseline Delta Shared Object Symbol
# ........ ....... .................. ..........................
#
+5.86% git [.] nth_midxed_offset
+5.24% git [.] nth_midxed_pack_int_id
3.45% +0.97% git [.] offset_to_pack_pos
3.30% +0.57% git [.] pack_pos_to_offset
+0.30% git [.] pack_pos_to_midx
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new p5326 introduced by the next patch will want these same tests,
interjecting its own setup in between. Move them out so that both perf
tests can reuse them.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By using shorter names for the test repos, we will get a slightly more
compressed performance summary without comprimising clarity.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we increase our list of commands to test in
p2000-sparse-operations.sh, we will want to have a slightly smaller test
repository. Reduce the size by a factor of four by reducing the depth of
the step that creates a big index around a moderately-sized repository.
Also add a step to run 'git checkout -' on repeat. This requires having
a previous location in the reflog, so add that to the initialization
steps.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite the backend for "diff -G/-S" to use pcre2 engine when
available.
* ab/pickaxe-pcre2: (22 commits)
xdiff-interface: replace discard_hunk_line() with a flag
xdiff users: use designated initializers for out_line
pickaxe -G: don't special-case create/delete
pickaxe -G: terminate early on matching lines
xdiff-interface: allow early return from xdiff_emit_line_fn
xdiff-interface: prepare for allowing early return
pickaxe -S: slightly optimize contains()
pickaxe: rename variables in has_changes() for brevity
pickaxe -S: support content with NULs under --pickaxe-regex
pickaxe: assert that we must have a needle under -G or -S
pickaxe: refactor function selection in diffcore-pickaxe()
perf: add performance test for pickaxe
pickaxe/style: consolidate declarations and assignments
diff.h: move pickaxe fields together again
pickaxe: die when --find-object and --pickaxe-all are combined
pickaxe: die when -G and --pickaxe-regex are combined
pickaxe tests: add missing test for --no-pickaxe-regex being an error
pickaxe tests: test for -G, -S and --find-object incompatibility
pickaxe tests: add test for "log -S" not being a regex
pickaxe tests: add test for diffgrep_consume() internals
...
When the TEST_OUTPUT_DIRECTORY is defined, then all test data will be
written in that directory instead of the default directory located in
"t/". While this works as expected for our normal tests, performance
tests fail to locate and aggregate performance data because they don't
know to handle TEST_OUTPUT_DIRECTORY correctly and always look at the
default location.
Fix the issue by adding a `--results-dir` parameter to "aggregate.perl"
which identifies the directory where results are and by making the "run"
script awake of the TEST_OUTPUT_DIRECTORY variable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for the -G and -S pickaxe options and related options.
This test supports being run with GIT_TEST_LONG=1 to adjust the limit
on the number of commits from 1k to 10k. The 1k limit seems to hit a
good spot on git.git
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git repack -A -d" in a partial clone unnecessarily loosened
objects in promisor pack.
* rs/repack-without-loosening-promised-objects:
repack: avoid loosening promisor objects in partial clones
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
When `git repack -A -d` is run in a partial clone, `pack-objects`
is invoked twice: once to repack all promisor objects, and once to
repack all non-promisor objects. The latter `pack-objects` invocation
is with --exclude-promisor-objects and --unpack-unreachable, which
loosens all objects unused during this invocation. Unfortunately,
this includes promisor objects.
Because the -d argument to `git repack` subsequently deletes all loose
objects also in packs, these just-loosened promisor objects will be
immediately deleted. However, this extra disk churn is unnecessary in
the first place. For example, in a newly-cloned partial repo that
filters all blob objects (e.g. `--filter=blob:none`), `repack` ends up
unpacking all trees and commits into the filesystem because every
object, in this particular case, is a promisor object. Depending on
the repo size, this increases the disk usage considerably: In my copy
of the linux.git, the object directory peaked 26GB of more disk usage.
In order to avoid this extra disk churn, pass the names of the promisor
packfiles as --keep-pack arguments to the second invocation of
`pack-objects`. This informs `pack-objects` that the promisor objects
are already in a safe packfile and, therefore, do not need to be
loosened.
For testing, we need to validate whether any object was loosened.
However, the "evidence" (loosened objects) is deleted during the
process which prevents us from inspecting the object directory.
Instead, let's teach `pack-objects` to count loosened objects and
emit via trace2 thus allowing inspecting the debug events after the
process is finished. This new event is used on the added regression
test.
Lastly, add a new perf test to evaluate the performance impact
made by this changes (tested on git.git):
Test HEAD^ HEAD
----------------------------------------------------------
5600.3: gc 134.38(41.93+90.95) 7.80(6.72+1.35) -94.2%
For a bigger repository, such as linux.git, the improvement is
even bigger:
Test HEAD^ HEAD
-------------------------------------------------------------------
5600.3: gc 6833.00(918.07+3162.74) 268.79(227.02+39.18) -96.1%
These improvements are particular big because every object in the
newly-cloned partial repository is a promisor object.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --exclude-promisor-objects is given, before traversing any objects
we iterate over all of the objects in any promisor packs, marking them
as UNINTERESTING and SEEN. We turn the oid we get from iterating the
pack into an object with parse_object(), but this has two problems:
- it's slow; we are zlib inflating (and reconstructing from deltas)
every byte of every object in the packfile
- it leaves the tree buffers attached to their structs, which means
our heap usage will grow to store every uncompressed tree
simultaneously. This can be gigabytes.
We can obviously fix the second by freeing the tree buffers after we've
parsed them. But we can observe that the function doesn't look at the
object contents at all! The only reason we call parse_object() is that
we need a "struct object" on which to set the flags. There are two
options here:
- we can look up just the object type via oid_object_info(), and then
call the appropriate lookup_foo() function
- we can call lookup_unknown_object(), which gives us an OBJ_NONE
struct (which will get auto-converted later by object_as_type() via
calls to lookup_commit(), etc).
The first one is closer to the current code, but we do pay the price to
look up the type for each object. The latter should be more efficient in
CPU, though it wastes a little bit of memory (the "unknown" object
structs are a union of all object types, so some of the structs are
bigger than they need to be). It also runs the risk of triggering a
latent bug in code that calls lookup_object() directly but isn't ready
to handle OBJ_NONE (such code would already be buggy, but we use
lookup_unknown_object() infrequently enough that it might be hiding).
I went with the second option here. I don't think the risk is high (and
we'd want to find and fix any such bugs anyway), and it should be more
efficient overall.
The new tests in p5600 show off the improvement (this is on git.git):
Test HEAD^ HEAD
-------------------------------------------------------------------------------
5600.5: count commits 0.37(0.37+0.00) 0.38(0.38+0.00) +2.7%
5600.6: count non-promisor commits 11.74(11.37+0.37) 0.04(0.03+0.00) -99.7%
The improvement is particularly big in this script because _every_
object in the newly-cloned partial repo is a promisor object. So after
marking them all, there's nothing left to traverse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To get the list of all promisor objects, we not only include all objects
in promisor packs, but also parse each of those objects to see which
objects they reference. After parsing a tree object, the tree->buffer
field will remain populated until we explicitly free it. So in a partial
clone of blob:none, for example, we are essentially reading every tree
in the repository (since they're all in the initial promisor pack), and
keeping all of their uncompressed contents in memory at once.
This patch frees the tree buffers after we've finished marking all of
their reachable objects. We shouldn't need to do this for any other
object type. While we are using some extra memory to store the structs,
no other object type stores the whole contents in its parsed form (we do
sometimes hold on to commit buffers, but less so these days due to
commit graphs, plus most commands which care about promisor objects turn
off the save_commit_buffer global).
Even for a moderate-sized repository like git.git, this patch drops the
peak heap (as measured by massif) for git-fsck from ~1.7GB to ~138MB.
Fsck is a good candidate for measuring here because it doesn't interact
with the promisor code except to call is_promisor_object(), so we can
isolate just this problem.
The added perf test shows only a tiny improvement on my machine for
git.git, since 1.7GB isn't enough to cause any real memory pressure:
Test HEAD^ HEAD
--------------------------------------------------------------------------------
5600.4: fsck 21.26(20.90+0.35) 20.84(20.79+0.04) -2.0%
With linux.git the absolute change is a bit bigger, though still a small
percentage:
Test HEAD^ HEAD
-----------------------------------------------------------------------------
5600.4: fsck 262.26(259.13+3.12) 254.92(254.62+0.29) -2.8%
I didn't have the patience to run it under massif with linux.git, but
it's probably on the order of about 14GB improvement, since that's the
sum of the sizes of all of the uncompressed trees (but still isn't
enough to create memory pressure on this particular machine, which has
64GB of RAM). Smaller machines would probably see a bigger effect on
runtime (and sadly our perf suite does not measure peak heap).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize "rev-list --use-bitmap-index --objects" corner case that
uses negative tags as the stopping points.
* ps/pack-bitmap-optim:
pack-bitmap: avoid traversal of objects referenced by uninteresting tag
p2000-sparse-operations.sh compares different Git commands in
repositories with many files at HEAD but using sparse-checkout to focus
on a small portion of those files.
Add extra copies of the repository that use the sparse-index format so
we can track how that affects the performance of different commands.
At this point in time, the sparse-index is 100% overhead from the CPU
front, and this is measurable in these tests:
Test
---------------------------------------------------------------
2000.2: git status (full-index-v3) 0.59(0.51+0.12)
2000.3: git status (full-index-v4) 0.59(0.52+0.11)
2000.4: git status (sparse-index-v3) 1.40(1.32+0.12)
2000.5: git status (sparse-index-v4) 1.41(1.36+0.08)
2000.6: git add -A (full-index-v3) 2.32(1.97+0.19)
2000.7: git add -A (full-index-v4) 2.17(1.92+0.14)
2000.8: git add -A (sparse-index-v3) 2.31(2.21+0.15)
2000.9: git add -A (sparse-index-v4) 2.30(2.20+0.13)
2000.10: git add . (full-index-v3) 2.39(2.02+0.20)
2000.11: git add . (full-index-v4) 2.20(1.94+0.16)
2000.12: git add . (sparse-index-v3) 2.36(2.27+0.12)
2000.13: git add . (sparse-index-v4) 2.33(2.21+0.16)
2000.14: git commit -a -m A (full-index-v3) 2.47(2.12+0.20)
2000.15: git commit -a -m A (full-index-v4) 2.26(2.00+0.17)
2000.16: git commit -a -m A (sparse-index-v3) 3.01(2.92+0.16)
2000.17: git commit -a -m A (sparse-index-v4) 3.01(2.94+0.15)
Note that there is very little difference between the v3 and v4 index
formats when the sparse-index is enabled. This is primarily due to the
fact that the relative file sizes are the same, and the command time is
mostly taken up by parsing tree objects to expand the sparse index into
a full one.
With the current file layout, the index file sizes are given by this
table:
| full index | sparse index |
+-------------+--------------+
v3 | 108 MiB | 1.6 MiB |
v4 | 80 MiB | 1.2 MiB |
Future updates will improve the performance of Git commands when the
index is sparse.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a test script that takes the default performance test (the Git
codebase) and multiplies it by 256 using four layers of duplicated
trees of width four. This results in nearly one million blob entries in
the index. Then, we can clone this repository with sparse-checkout
patterns that demonstrate four copies of the initial repository. Each
clone will use a different index format or mode so peformance can be
tested across the different options.
Note that the initial repo is stripped of submodules before doing the
copies. This preserves the expected data shape of the sparse index,
because directories containing submodules are not collapsed to a sparse
directory entry.
Run a few Git commands on these clones, especially those that use the
index (status, add, commit).
Here are the results on my Linux machine:
Test
--------------------------------------------------------------
2000.2: git status (full-index-v3) 0.37(0.30+0.09)
2000.3: git status (full-index-v4) 0.39(0.32+0.10)
2000.4: git add -A (full-index-v3) 1.42(1.06+0.20)
2000.5: git add -A (full-index-v4) 1.26(0.98+0.16)
2000.6: git add . (full-index-v3) 1.40(1.04+0.18)
2000.7: git add . (full-index-v4) 1.26(0.98+0.17)
2000.8: git commit -a -m A (full-index-v3) 1.42(1.11+0.16)
2000.9: git commit -a -m A (full-index-v4) 1.33(1.08+0.16)
It is perhaps noteworthy that there is an improvement when using index
version 4. This is because the v3 index uses 108 MiB while the v4
index uses 80 MiB. Since the repeated portions of the directories are
very short (f3/f1/f2, for example) this ratio is less pronounced than in
similarly-sized real repositories.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff-index" codepath has been taught to trust fsmonitor status
to reduce number of lstat() calls.
* nk/diff-index-fsmonitor:
fsmonitor: add perf test for git diff HEAD
fsmonitor: add assertion that fsmonitor is valid to check_removed
fsmonitor: skip lstat deletion check during git diff-index
"git repack" so far has been only capable of repacking everything
under the sun into a single pack (or split by size). A cleverer
strategy to reduce the cost of repacking a repository has been
introduced.
* tb/geometric-repack:
builtin/pack-objects.c: ignore missing links with --stdin-packs
builtin/repack.c: reword comment around pack-objects flags
builtin/repack.c: be more conservative with unsigned overflows
builtin/repack.c: assign pack split later
t7703: test --geometric repack with loose objects
builtin/repack.c: do not repack single packs with --geometric
builtin/repack.c: add '--geometric' option
packfile: add kept-pack cache for find_kept_pack_entry()
builtin/pack-objects.c: rewrite honor-pack-keep logic
p5303: measure time to repack with keep
p5303: add missing &&-chains
builtin/pack-objects.c: add '--stdin-packs' option
revision: learn '--no-kept-objects'
packfile: introduce 'find_kept_pack_entry()'
Perf test update to work better in secondary worktrees.
* jk/perf-in-worktrees:
t/perf: avoid copying worktree files from test repo
t/perf: handle worktrees as test repos
When preparing the bitmap walk, we first establish the set of of have
and want objects by iterating over the set of pending objects: if an
object is marked as uninteresting, it's declared as an object we already
have, otherwise as an object we want. These two sets are then used to
compute which transitively referenced objects we need to obtain.
One special case here are tag objects: when a tag is requested, we
resolve it to its first not-tag object and add both resolved objects as
well as the tag itself into either the have or want set. Given that the
uninteresting-property always propagates to referenced objects, it is
clear that if the tag is uninteresting, so are its children and vice
versa. But we fail to propagate the flag, which effectively means that
referenced objects will always be interesting except for the case where
they have already been marked as uninteresting explicitly.
This mislabeling does not impact correctness: we now have it in our
"wants" set, and given that we later do an `AND NOT` of the bitmaps of
"wants" and "haves" sets it is clear that the result must be the same.
But we now start to needlessly traverse the tag's referenced objects in
case it is uninteresting, even though we know that each referenced
object will be uninteresting anyway. In the worst case, this can lead to
a complete graph walk just to establish that we do not care for any
object.
Fix the issue by propagating the `UNINTERESTING` flag to pointees of tag
objects and add a benchmark with negative revisions to p5310. This shows
some nice performance benefits, tested with linux.git:
Test HEAD~ HEAD
---------------------------------------------------------------------------------------------------------------
5310.3: repack to disk 193.18(181.46+16.42) 194.61(183.41+15.83) +0.7%
5310.4: simulated clone 25.93(24.88+1.05) 25.81(24.73+1.08) -0.5%
5310.5: simulated fetch 2.64(5.30+0.69) 2.59(5.16+0.65) -1.9%
5310.6: pack to file (bitmap) 58.75(57.56+6.30) 58.29(57.61+5.73) -0.8%
5310.7: rev-list (commits) 1.45(1.18+0.26) 1.46(1.22+0.24) +0.7%
5310.8: rev-list (objects) 15.35(14.22+1.13) 15.30(14.23+1.07) -0.3%
5310.9: rev-list with tag negated via --not --all (objects) 22.49(20.93+1.56) 0.11(0.09+0.01) -99.5%
5310.10: rev-list with negative tag (objects) 0.61(0.44+0.16) 0.51(0.35+0.16) -16.4%
5310.11: rev-list count with blob:none 12.15(11.19+0.96) 12.18(11.19+0.99) +0.2%
5310.12: rev-list count with blob:limit=1k 17.77(15.71+2.06) 17.75(15.63+2.12) -0.1%
5310.13: rev-list count with tree:0 1.69(1.31+0.38) 1.68(1.28+0.39) -0.6%
5310.14: simulated partial clone 20.14(19.15+0.98) 19.98(18.93+1.05) -0.8%
5310.16: clone (partial bitmap) 12.78(13.89+1.07) 12.72(13.99+1.01) -0.5%
5310.17: pack to file (partial bitmap) 42.07(45.44+2.72) 41.44(44.66+2.80) -1.5%
5310.18: rev-list with tree filter (partial bitmap) 0.44(0.29+0.15) 0.46(0.32+0.14) +4.5%
While most benchmarks are probably in the range of noise, the newly
added 5310.9 and 5310.10 benchmarks consistenly perform better.
Signed-off-by: Patrick Steinhardt <ps@pks.im>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano