Merge branch 'maint'

* maint:
  Rename git-core rpm to just git and rename the meta-pacakge to git-all.
  push: document the status output
  Documentation/push: clarify matching refspec behavior
  push: indicate partialness of error message

Documentation/git-push.txt

@@ -47,9 +47,9 @@ even if it does not result in a fast forward update.
 +
 Note: If no explicit refspec is found, (that is neither
 on the command line nor in any Push line of the
-corresponding remotes file---see below), then all the
+corresponding remotes file---see below), then "matching" heads are
-heads that exist both on the local side and on the remote
+pushed: for every head that exists on the local side, the remote side is
-side are updated.
+updated if a head of the same name already exists on the remote side.
 +
 `tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`.
 +
@@ -108,6 +108,55 @@ the remote repository.
 
 include::urls-remotes.txt[]
 
+OUTPUT
+------
+
+The output of "git push" depends on the transport method used; this
+section describes the output when pushing over the git protocol (either
+locally or via ssh).
+
+The status of the push is output in tabular form, with each line
+representing the status of a single ref. Each line is of the form:
+
+-------------------------------
+ <flag> <summary> <from> -> <to> (<reason>)
+-------------------------------
+
+flag::
+	A single character indicating the status of the ref. This is
+	blank for a successfully pushed ref, `!` for a ref that was
+	rejected or failed to push, and '=' for a ref that was up to
+	date and did not need pushing (note that the status of up to
+	date refs is shown only when `git push` is running verbosely).
+
+summary::
+	For a successfully pushed ref, the summary shows the old and new
+	values of the ref in a form suitable for using as an argument to
+	`git log` (this is `<old>..<new>` in most cases, and
+	`<old>...<new>` for forced non-fast forward updates). For a
+	failed update, more details are given for the failure.
+	The string `rejected` indicates that git did not try to send the
+	ref at all (typically because it is not a fast forward). The
+	string `remote rejected` indicates that the remote end refused
+	the update; this rejection is typically caused by a hook on the
+	remote side. The string `remote failure` indicates that the
+	remote end did not report the successful update of the ref
+	(perhaps because of a temporary error on the remote side, a
+	break in the network connection, or other transient error).
+
+from::
+	The name of the local ref being pushed, minus its
+	`refs/<type>/` prefix. In the case of deletion, the
+	name of the local ref is omitted.
+
+to::
+	The name of the remote ref being updated, minus its
+	`refs/<type>/` prefix.
+
+reason::
+	A human-readable explanation. In the case of successfully pushed
+	refs, no explanation is needed. For a failed ref, the reason for
+	failure is described.
 
 Examples
 --------

builtin-push.c

@@ -90,7 +90,7 @@ static int do_push(const char *repo, int flags)
 		if (!err)
 			continue;
 
-		error("failed to push to '%s'", remote->url[i]);
+		error("failed to push some refs to '%s'", remote->url[i]);
 		errs++;
 	}
 	return !!errs;

git.spec.in

@@ -3,7 +3,7 @@
 Name: 		git
 Version: 	@@VERSION@@
 Release: 	1%{?dist}
-Summary:  	Git core and tools
+Summary:  	Core git tools
 License: 	GPL
 Group: 		Development/Tools
 URL: 		http://kernel.org/pub/software/scm/git/
@@ -11,80 +11,86 @@ Source: 	http://kernel.org/pub/software/scm/git/%{name}-%{version}.tar.gz
 BuildRequires:	zlib-devel >= 1.2, openssl-devel, curl-devel, expat-devel, gettext  %{!?_without_docs:, xmlto, asciidoc > 6.0.3}
 BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
 
-Requires:	git-core = %{version}-%{release}
-Requires:	git-svn = %{version}-%{release}
-Requires:	git-cvs = %{version}-%{release}
-Requires:	git-arch = %{version}-%{release}
-Requires:	git-email = %{version}-%{release}
-Requires:	gitk = %{version}-%{release}
-Requires:	git-gui = %{version}-%{release}
 Requires:	perl-Git = %{version}-%{release}
+Requires:	zlib >= 1.2, rsync, curl, less, openssh-clients, expat
+Provides:	git-core = %{version}-%{release}
+Obsoletes:	git-core <= 1.5.4.2
+Obsoletes:	git-p4
 
 %description
 Git is a fast, scalable, distributed revision control system with an
 unusually rich command set that provides both high-level operations
 and full access to internals.
 
-This is a dummy package which brings in all subpackages.
+The git rpm installs the core tools with minimal dependencies.  To
+install all git packages, including tools for integrating with other
+SCMs, install the git-all meta-package.
 
-%package core
+%package all
-Summary:	Core git tools
+Summary:	Meta-package to pull in all git tools
 Group:		Development/Tools
-Requires:	zlib >= 1.2, rsync, curl, less, openssh-clients, expat
+Requires:	git = %{version}-%{release}
-Obsoletes:	git-p4
+Requires:	git-svn = %{version}-%{release}
-%description core
+Requires:	git-cvs = %{version}-%{release}
+Requires:	git-arch = %{version}-%{release}
+Requires:	git-email = %{version}-%{release}
+Requires:	gitk = %{version}-%{release}
+Requires:	git-gui = %{version}-%{release}
+Obsoletes:	git <= 1.5.4.2
+
+%description all
 Git is a fast, scalable, distributed revision control system with an
 unusually rich command set that provides both high-level operations
 and full access to internals.
 
-These are the core tools with minimal dependencies.
+This is a dummy package which brings in all subpackages.
 
 %package svn
 Summary:        Git tools for importing Subversion repositories
 Group:          Development/Tools
-Requires:       git-core = %{version}-%{release}, subversion
+Requires:       git = %{version}-%{release}, subversion
 %description svn
 Git tools for importing Subversion repositories.
 
 %package cvs
 Summary:        Git tools for importing CVS repositories
 Group:          Development/Tools
-Requires:       git-core = %{version}-%{release}, cvs, cvsps
+Requires:       git = %{version}-%{release}, cvs, cvsps
 %description cvs
 Git tools for importing CVS repositories.
 
 %package arch
 Summary:        Git tools for importing Arch repositories
 Group:          Development/Tools
-Requires:       git-core = %{version}-%{release}, tla
+Requires:       git = %{version}-%{release}, tla
 %description arch
 Git tools for importing Arch repositories.
 
 %package email
 Summary:        Git tools for sending email
 Group:          Development/Tools
-Requires:	git-core = %{version}-%{release}
+Requires:	git = %{version}-%{release}
 %description email
 Git tools for sending email.
 
 %package gui
 Summary:        Git GUI tool
 Group:          Development/Tools
-Requires:       git-core = %{version}-%{release}, tk >= 8.4
+Requires:       git = %{version}-%{release}, tk >= 8.4
 %description gui
 Git GUI tool
 
 %package -n gitk
 Summary:        Git revision tree visualiser ('gitk')
 Group:          Development/Tools
-Requires:       git-core = %{version}-%{release}, tk >= 8.4
+Requires:       git = %{version}-%{release}, tk >= 8.4
 %description -n gitk
 Git revision tree visualiser ('gitk')
 
 %package -n perl-Git
 Summary:        Perl interface to Git
 Group:          Development/Libraries
-Requires:       git-core = %{version}-%{release}
+Requires:       git = %{version}-%{release}
 Requires:       perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version))
 BuildRequires:  perl(Error)
 
@@ -121,8 +127,12 @@ rm -rf $RPM_BUILD_ROOT%{_mandir}
 %clean
 rm -rf $RPM_BUILD_ROOT
 
-%files
+%files -f bin-man-doc-files
-# These are no files in the root package
+%defattr(-,root,root)
+%{_datadir}/git-core/
+%doc README COPYING Documentation/*.txt
+%{!?_without_docs: %doc Documentation/*.html Documentation/howto}
+%{!?_without_docs: %doc Documentation/technical}
 
 %files svn
 %defattr(-,root,root)
@@ -173,14 +183,13 @@ rm -rf $RPM_BUILD_ROOT
 %files -n perl-Git -f perl-files
 %defattr(-,root,root)
 
-%files core -f bin-man-doc-files
+%files all
-%defattr(-,root,root)
+# No files for you!
-%{_datadir}/git-core/
-%doc README COPYING Documentation/*.txt
-%{!?_without_docs: %doc Documentation/*.html Documentation/howto}
-%{!?_without_docs: %doc Documentation/technical}
 
 %changelog
+* Fri Feb 15 2008 Kristian Høgsberg <krh@redhat.com>
+- Rename git-core to just git and rename meta package from git to git-all.
+
 * Sun Feb 03 2008 James Bowes <jbowes@dangerouslyinc.com>
 - Add a BuildRequires for gettext