diff --git a/Documentation/git-cat-file.adoc b/Documentation/git-cat-file.adoc
index 86b9181599..643eac9245 100644
--- a/Documentation/git-cat-file.adoc
+++ b/Documentation/git-cat-file.adoc
@@ -169,6 +169,13 @@ info <object>::
 	Print object info for object reference `<object>`. This corresponds to the
 	output of `--batch-check`.
 
+remote-object-info <remote> <object>...::
+	Print object info for object references `<object>` at specified
+	`<remote>` without downloading objects from the remote.
+	Raise an error when the `object-info` capability is not supported by the remote.
+	Raise an error when no object references are provided.
+	This command may be combined with `--buffer`.
+
 flush::
 	Used with `--buffer` to execute all preceding commands that were issued
 	since the beginning or since the last flush was issued. When `--buffer`
@@ -301,7 +308,8 @@ one per line, and print information based on the command given. With
 `--batch-command`, the `info` command followed by an object will print
 information about the object the same way `--batch-check` would, and the
 `contents` command followed by an object prints contents in the same way
-`--batch` would.
+`--batch` would. The `remote-object-info` command followed by a remote and
+objects IDs prints object info from the remote without downloading the objects.
 
 You can specify the information shown for each object by using a custom
 `<format>`. The `<format>` is copied literally to stdout for each
@@ -324,15 +332,12 @@ newline. The available atoms are:
 	reports).
 
 `objectsize:disk`::
-	The size, in bytes, that the object takes up on disk. See the
-	note about on-disk sizes in the `CAVEATS` section below.
+	The size, in bytes, that the object takes up on disk.
 
 `deltabase`::
 	If the object is stored as a delta on-disk, this expands to the
 	full hex representation of the delta base object name.
-	Otherwise, expands to the null OID (all zeroes). See `CAVEATS`
-	below.
-
+	Otherwise, expands to the null OID (all zeroes).
 `rest`::
 	If this atom is used in the output string, input lines are split
 	at the first whitespace boundary. All characters before that
@@ -340,8 +345,14 @@ newline. The available atoms are:
 	after that first run of whitespace (i.e., the "rest" of the
 	line) are output in place of the `%(rest)` atom.
 
+The command `remote-object-info` only supports the `%(objectname)` and
+`%(objectsize)` placeholders. See `CAVEATS` below for more information.
+
 If no format is specified, the default format is `%(objectname)
-%(objecttype) %(objectsize)`.
+%(objecttype) %(objectsize)`, except for `remote-object-info` commands which
+use `%(objectname) %(objectsize)` because "%(objecttype)" is not supported yet.
+WARNING: When "%(objecttype)" is supported, the default format WILL be unified,
+so DO NOT RELY on the current default format to stay the same!!!
 
 If `--batch` is specified, or if `--batch-command` is used with the `contents`
 command, the object information is followed by the object contents (consisting
@@ -438,6 +449,10 @@ scripting purposes.
 CAVEATS
 -------
 
+Note that since only `%(objectname)` and `%(objectsize)` are currently
+supported by the `remote-object-info` command. Using any other placeholder in
+the format string will return an empty string in its position.
+
 Note that the sizes of objects on disk are reported accurately, but care
 should be taken in drawing conclusions about which refs or objects are
 responsible for disk usage. The size of a packed non-delta object may be
diff --git a/Documentation/gitprotocol-v2.adoc b/Documentation/gitprotocol-v2.adoc
index 2beb70595f..d3530c52ea 100644
--- a/Documentation/gitprotocol-v2.adoc
+++ b/Documentation/gitprotocol-v2.adoc
@@ -568,21 +568,26 @@ An `object-info` request takes the following arguments:
 
 	oid <oid>
 	Indicates to the server an object which the client wants to obtain
-	information for.
+	information for. They must be full object IDs.
 
 The response of `object-info` is a list of the requested object ids
 and associated requested information, each separated by a single space.
 
 	output = info flush-pkt
 
-	info = PKT-LINE(attrs) LF)
+	info = PKT-LINE(attrs LF)
 		*PKT-LINE(obj-info LF)
 
 	attrs = attr | attrs SP attrs
 
+	obj-size = 1*DIGIT
+
 	attr = "size"
 
-	obj-info = obj-id SP obj-size
+	obj-info = obj-id SP [obj-size]
+
+	If the server does not recognize the object id, the response will be
+	`obj-id SP` regardless of the number of attributes requested.
 
 bundle-uri
 ~~~~~~~~~~
diff --git a/Makefile b/Makefile
index 21cc098492..acb0fab08c 100644
--- a/Makefile
+++ b/Makefile
@@ -1160,6 +1160,7 @@ LIB_OBJS += ewah/ewah_rlw.o
 LIB_OBJS += exec-cmd.o
 LIB_OBJS += fetch-negotiator.o
 LIB_OBJS += fetch-pack.o
+LIB_OBJS += fetch-object-info.o
 LIB_OBJS += fmt-merge-msg.o
 LIB_OBJS += fsck.o
 LIB_OBJS += fsmonitor.o
diff --git a/builtin/cat-file.c b/builtin/cat-file.c
index b7ccbdfcab..93d25a2536 100644
--- a/builtin/cat-file.c
+++ b/builtin/cat-file.c
@@ -29,6 +29,22 @@
 #include "promisor-remote.h"
 #include "mailmap.h"
 #include "write-or-die.h"
+#include "alias.h"
+#include "remote.h"
+#include "transport.h"
+
+/*
+ * Maximum length for a remote URL. While no universal standard exists,
+ * 8K is assumed to be a reasonable limit.
+ */
+#define MAX_REMOTE_URL_LEN (8 * 1024)
+
+/* Maximum number of objects allowed in a single remote-object-info request. */
+#define MAX_ALLOWED_OBJ_LIMIT 10000
+
+/* Maximum input size permitted for the remote-object-info command. */
+#define MAX_REMOTE_OBJ_INFO_LINE \
+	(MAX_REMOTE_URL_LEN + MAX_ALLOWED_OBJ_LIMIT * (GIT_MAX_HEXSZ + 1))
 
 enum batch_mode {
 	BATCH_MODE_CONTENTS,
@@ -317,8 +333,16 @@ struct expand_data {
 	 * optimized out.
 	 */
 	unsigned skip_object_info : 1;
+
+	/*
+	 * Flags about when an object info is being fetched from remote.
+	 */
+	unsigned is_remote:1;
+
+	struct string_list remote_allowed_atoms;
 };
-#define EXPAND_DATA_INIT  { .mode = S_IFINVALID }
+#define EXPAND_DATA_INIT  { .mode = S_IFINVALID, .type = OBJ_BAD, \
+			    .remote_allowed_atoms = STRING_LIST_INIT_NODUP }
 
 static int is_atom(const char *atom, const char *s, int slen)
 {
@@ -329,14 +353,25 @@ static int is_atom(const char *atom, const char *s, int slen)
 static int expand_atom(struct strbuf *sb, const char *atom, int len,
 		       struct expand_data *data)
 {
+	if (data->is_remote) {
+		size_t i;
+		for (i = 0; i < data->remote_allowed_atoms.nr; i++)
+			if (is_atom(data->remote_allowed_atoms.items[i].string, atom, len))
+				break;
+		if (i == data->remote_allowed_atoms.nr)
+			return 1;
+	}
+
 	if (is_atom("objectname", atom, len)) {
 		if (!data->mark_query)
 			strbuf_add_oid_hex(sb, &data->oid);
 	} else if (is_atom("objecttype", atom, len)) {
-		if (data->mark_query)
+		if (data->mark_query) {
 			data->info.typep = &data->type;
-		else
-			strbuf_addstr(sb, type_name(data->type));
+		} else {
+			const char *t = type_name(data->type);
+			strbuf_addstr(sb, t ? t : "");
+		}
 	} else if (is_atom("objectsize", atom, len)) {
 		if (data->mark_query)
 			data->info.sizep = &data->size;
@@ -636,6 +671,73 @@ out:
 	object_context_release(&ctx);
 }
 
+static int get_remote_info(struct batch_options *opt,
+			   int argc,
+			   const char **argv,
+			   struct object_info **remote_object_info,
+			   struct oid_array *object_info_oids,
+			   struct string_list *object_info_options)
+{
+	int retval = 0;
+	struct remote *remote = NULL;
+	struct object_id oid;
+	struct transport *gtransport;
+
+	/*
+	 * TODO: Change the format to "%(objectname) %(objectsize)" when
+	 * remote-object-info command is used. Once we start supporting objecttype
+	 * the default format should change to DEFAULT_FORMAT.
+	 */
+	if (!opt->format)
+		opt->format = "%(objectname) %(objectsize)";
+
+	remote = remote_get(argv[0]);
+	if (!remote)
+		die(_("must supply valid remote when using remote-object-info"));
+
+	oid_array_clear(object_info_oids);
+	for (size_t i = 1; i < argc; i++) {
+		if (get_oid_hex(argv[i], &oid)) {
+			size_t len = strlen(argv[i]);
+
+			if (len < the_hash_algo->hexsz && len >= 4) {
+				size_t j;
+				for (j = 0; j < len; j++)
+					if (!isxdigit(argv[i][j]))
+						break;
+				if (j == len)
+					die(_("remote-object-info does not support "
+					      "short oids, %d characters required"),
+					    (int)the_hash_algo->hexsz);
+			}
+			die(_("not a valid object name '%s'"), argv[i]);
+		}
+		oid_array_append(object_info_oids, &oid);
+	}
+
+	if (!object_info_oids->nr)
+		die(_("remote-object-info requires objects"));
+
+	gtransport = transport_get(remote, NULL);
+
+	if (!gtransport->smart_options) {
+		retval = -1;
+		goto cleanup;
+	}
+
+	CALLOC_ARRAY(*remote_object_info, object_info_oids->nr);
+	gtransport->smart_options->object_info_oids = object_info_oids;
+
+	if (object_info_options->nr > 0) {
+		gtransport->smart_options->object_info_options = object_info_options;
+		gtransport->smart_options->object_info_data = *remote_object_info;
+		retval = transport_fetch_object_info(gtransport);
+	}
+cleanup:
+	transport_disconnect(gtransport);
+	return retval;
+}
+
 struct object_cb_data {
 	struct batch_options *opt;
 	struct expand_data *expand;
@@ -717,18 +819,110 @@ static void parse_cmd_mailmap(struct batch_options *opt UNUSED,
 		load_mailmap();
 }
 
+struct protocol_placeholder_entry {
+	const char *option;
+	const char *atom;
+};
+
+static const struct protocol_placeholder_entry remote_atom_map[] = {
+	{"size", "objectsize"},
+	{"type", "objecttype"},
+	/*
+	 * Add new protocol options here. Even if the server doesn't support
+	 * them the allow_list will drop them if the server doesn't advertise
+	 * them.
+	 */
+};
+
+static void parse_cmd_remote_object_info(struct batch_options *opt,
+					 const char *line, struct strbuf *output,
+					 struct expand_data *data)
+{
+	int count;
+	const char **argv;
+	char *line_to_split;
+	struct object_info *remote_object_info = NULL;
+	struct oid_array object_info_oids = OID_ARRAY_INIT;
+	struct string_list object_info_options = STRING_LIST_INIT_NODUP;
+
+	if (strlen(line) >= MAX_REMOTE_OBJ_INFO_LINE)
+		die(_("remote-object-info command too long"));
+
+	line_to_split = xstrdup(line);
+	count = split_cmdline(line_to_split, &argv);
+	if (count < 0)
+		die(_("remote-object-info: %s"), split_cmdline_strerror(count));
+	if (count - 1 > MAX_ALLOWED_OBJ_LIMIT)
+		die(_("remote-object-info supports at most %d objects"),
+		    MAX_ALLOWED_OBJ_LIMIT);
+
+	if (data->info.sizep)
+		string_list_append(&object_info_options, "size");
+	if (data->info.typep)
+		string_list_append(&object_info_options, "type");
+
+	if (get_remote_info(opt, count, argv, &remote_object_info,
+			    &object_info_oids, &object_info_options))
+		goto cleanup;
+
+	string_list_clear(&data->remote_allowed_atoms, 0);
+	string_list_append(&data->remote_allowed_atoms, "objectname");
+	for (size_t i = 0; i < ARRAY_SIZE(remote_atom_map); i++)
+		if (unsorted_string_list_has_string(&object_info_options, remote_atom_map[i].option))
+			string_list_append(&data->remote_allowed_atoms,
+					   remote_atom_map[i].atom);
+
+	data->skip_object_info = 1;
+	for (size_t i = 0; i < object_info_oids.nr; i++) {
+		int found = 0;
+		data->oid = object_info_oids.oid[i];
+		/*
+		 * When reaching here, it means remote-object-info can retrieve
+		 * information from server without downloading them.
+		 */
+		if (remote_object_info[i].sizep) {
+			data->size = *remote_object_info[i].sizep;
+			found = 1;
+		}
+
+		if (remote_object_info[i].typep) {
+			data->type = *remote_object_info[i].typep;
+			found = 1;
+		}
+
+		if (!found && object_info_options.nr > 0) {
+			report_object_status(opt, oid_to_hex(&data->oid),
+					     &data->oid, "missing");
+			continue;
+		}
+
+		opt->batch_mode = BATCH_MODE_INFO;
+		data->is_remote = 1;
+		batch_object_write(argv[i + 1], output, opt, data, NULL, 0);
+		data->is_remote = 0;
+	}
+	data->skip_object_info = 0;
+
+cleanup:
+	for (size_t i = 0; i < object_info_oids.nr; i++)
+		free_object_info_contents(&remote_object_info[i]);
+	string_list_clear(&object_info_options, 0);
+	free(line_to_split);
+	free(argv);
+	free(remote_object_info);
+	oid_array_clear(&object_info_oids);
+}
+
 static void dispatch_calls(struct batch_options *opt,
 		struct strbuf *output,
 		struct expand_data *data,
 		struct queued_cmd *cmd,
-		int nr)
+		size_t nr)
 {
-	int i;
-
 	if (!opt->buffer_output)
 		die(_("flush is only for --buffer mode"));
 
-	for (i = 0; i < nr; i++)
+	for (size_t i = 0; i < nr; i++)
 		cmd[i].fn(opt, cmd[i].line, output, data);
 
 	fflush(stdout);
@@ -736,9 +930,7 @@ static void dispatch_calls(struct batch_options *opt,
 
 static void free_cmds(struct queued_cmd *cmd, size_t *nr)
 {
-	size_t i;
-
-	for (i = 0; i < *nr; i++)
+	for (size_t i = 0; i < *nr; i++)
 		FREE_AND_NULL(cmd[i].line);
 
 	*nr = 0;
@@ -752,8 +944,9 @@ static const struct parse_cmd {
 } commands[] = {
 	{ "contents", parse_cmd_contents, 1 },
 	{ "info", parse_cmd_info, 1 },
-	{ "flush", NULL, 0 },
 	{ "mailmap", parse_cmd_mailmap, 1 },
+	{ "remote-object-info", parse_cmd_remote_object_info, 1 },
+	{ "flush", NULL, 0 },
 };
 
 static void batch_objects_command(struct batch_options *opt,
@@ -765,7 +958,6 @@ static void batch_objects_command(struct batch_options *opt,
 	size_t alloc = 0, nr = 0;
 
 	while (strbuf_getdelim_strip_crlf(&input, stdin, opt->input_delim) != EOF) {
-		int i;
 		const struct parse_cmd *cmd = NULL;
 		const char *p = NULL, *cmd_end;
 		struct queued_cmd call = {0};
@@ -775,7 +967,7 @@ static void batch_objects_command(struct batch_options *opt,
 		if (isspace(*input.buf))
 			die(_("whitespace before command: '%s'"), input.buf);
 
-		for (i = 0; i < ARRAY_SIZE(commands); i++) {
+		for (size_t i = 0; i < ARRAY_SIZE(commands); i++) {
 			if (!skip_prefix(input.buf, commands[i].name, &cmd_end))
 				continue;
 
@@ -1034,6 +1226,7 @@ static int batch_objects(struct batch_options *opt)
  cleanup:
 	strbuf_release(&input);
 	strbuf_release(&output);
+	string_list_clear(&data.remote_allowed_atoms, 0);
 	cfg->warn_on_object_refname_ambiguity = save_warning;
 	return retval;
 }
diff --git a/connect.c b/connect.c
index 47e39d2a73..7b472f8e5f 100644
--- a/connect.c
+++ b/connect.c
@@ -700,6 +700,40 @@ int server_supports(const char *feature)
 	return !!server_feature_value(feature, NULL);
 }
 
+void write_command_and_capabilities(struct strbuf *req_buf, const char *command,
+				    const struct string_list *server_options)
+{
+	const char *hash_name;
+	int advertise_sid;
+
+	repo_config_get_bool(the_repository, "transfer.advertisesid", &advertise_sid);
+
+	ensure_server_supports_v2(command);
+	packet_buf_write(req_buf, "command=%s", command);
+	if (server_supports_v2("agent"))
+		packet_buf_write(req_buf, "agent=%s", git_user_agent_sanitized());
+	if (advertise_sid && server_supports_v2("session-id"))
+		packet_buf_write(req_buf, "session-id=%s", trace2_session_id());
+	if (server_options && server_options->nr) {
+		ensure_server_supports_v2("server-option");
+		for (size_t i = 0; i < server_options->nr; i++)
+			packet_buf_write(req_buf, "server-option=%s",
+					 server_options->items[i].string);
+	}
+
+	if (server_feature_v2("object-format", &hash_name)) {
+		const unsigned int hash_algo = hash_algo_by_name(hash_name);
+		if (hash_algo_by_ptr(the_hash_algo) != hash_algo)
+			die(_("mismatched algorithms: client %s; server %s"),
+			    the_hash_algo->name, hash_name);
+		packet_buf_write(req_buf, "object-format=%s", the_hash_algo->name);
+	} else if (hash_algo_by_ptr(the_hash_algo) != GIT_HASH_SHA1_LEGACY) {
+		die(_("the server does not support algorithm '%s'"),
+		    the_hash_algo->name);
+	}
+	packet_buf_delim(req_buf);
+}
+
 static const char *url_scheme_name(enum url_scheme scheme)
 {
 	switch (scheme) {
diff --git a/connect.h b/connect.h
index aa482a37fb..c2bf492ed9 100644
--- a/connect.h
+++ b/connect.h
@@ -34,4 +34,12 @@ void check_stateless_delimiter(int stateless_rpc,
 			       struct packet_reader *reader,
 			       const char *error);
 
+struct string_list;
+/*
+ * Writes a command along with the requested server capabilities/features into a
+ * request buffer.
+ */
+void write_command_and_capabilities(struct strbuf *req_buf, const char *command,
+				    const struct string_list *server_options);
+
 #endif
diff --git a/fetch-object-info.c b/fetch-object-info.c
new file mode 100644
index 0000000000..e968341676
--- /dev/null
+++ b/fetch-object-info.c
@@ -0,0 +1,115 @@
+#include "git-compat-util.h"
+#include "gettext.h"
+#include "hex.h"
+#include "pkt-line.h"
+#include "connect.h"
+#include "oid-array.h"
+#include "odb.h"
+#include "fetch-object-info.h"
+#include "string-list.h"
+
+/* Sends object-info command and its arguments into the request buffer. */
+static void send_object_info_request(const int fd_out, struct object_info_args *args)
+{
+	struct strbuf req_buf = STRBUF_INIT;
+
+	write_command_and_capabilities(&req_buf, "object-info", args->server_options);
+
+	if (unsorted_string_list_has_string(args->object_info_options, "size"))
+		packet_buf_write(&req_buf, "size");
+	else
+		BUG("only size should be in object_info_options");
+
+	if (args->oids)
+		for (size_t i = 0; i < args->oids->nr; i++)
+			packet_buf_write(&req_buf, "oid %s", oid_to_hex(&args->oids->oid[i]));
+
+	packet_buf_flush(&req_buf);
+	if (write_in_full(fd_out, req_buf.buf, req_buf.len) < 0)
+		die_errno(_("unable to write request to remote"));
+
+	strbuf_release(&req_buf);
+}
+
+int fetch_object_info(const enum protocol_version version, struct object_info_args *args,
+		      struct packet_reader *reader, struct object_info *object_info_data,
+		      const int stateless_rpc, const int fd_out)
+{
+	int size_index = -1;
+
+	switch (version) {
+	case protocol_v2:
+		if (!server_supports_v2("object-info"))
+			die(_("object-info capability is not enabled on the server"));
+		/*
+		 * When removing an element from the list it gets swapped by the
+		 * last element, iterate backwards to prevent elements skipping
+		 * evaluation.
+		 *
+		 * object_info_options->nr can be safely casted without overflow
+		 * beacuse the number of options is a small known number (the
+		 * supported placeholders which currently are size and type).
+		 */
+		for (int i = (int)args->object_info_options->nr - 1; i >= 0; i--)
+			if (!server_supports_feature("object-info",
+						     args->object_info_options->items[i].string, 0))
+				unsorted_string_list_delete_item(args->object_info_options, i, 0);
+		/*
+		 * If no options are left after the filtering, avoid unnecessary
+		 * request to the server.
+		 */
+		if (!args->object_info_options->nr)
+			return 0;
+
+		send_object_info_request(fd_out, args);
+		break;
+	case protocol_v1:
+	case protocol_v0:
+		die(_("unsupported protocol version. expected v2"));
+	case protocol_unknown_version:
+		BUG("unknown protocol version");
+	}
+
+	for (size_t i = 0; i < args->object_info_options->nr; i++) {
+		if (packet_reader_read(reader) != PACKET_READ_NORMAL) {
+			check_stateless_delimiter(stateless_rpc, reader,
+						  "stateless delimiter expected");
+			return -1;
+		}
+
+		if (!string_list_has_string(args->object_info_options, reader->line))
+			return -1;
+
+		if (!strcmp(reader->line, "size")) {
+			size_index = i;
+			for (size_t j = 0; j < args->oids->nr; j++)
+				object_info_data[j].sizep = xcalloc(1, sizeof(*object_info_data[j].sizep));
+		} else {
+			BUG("only size is supported");
+		}
+	}
+
+	for (size_t i = 0; packet_reader_read(reader) == PACKET_READ_NORMAL && i < args->oids->nr; i++) {
+		struct string_list object_info_values = STRING_LIST_INIT_DUP;
+
+		string_list_split(&object_info_values, reader->line, " ", -1);
+		if (size_index >= 0) {
+			if (!strcmp(object_info_values.items[1 + size_index].string, "")) {
+				FREE_AND_NULL(object_info_data[i].sizep);
+				string_list_clear(&object_info_values, 0);
+				continue;
+			}
+
+			if (strtoumax_szt(object_info_values.items[1 + size_index].string,
+					  10, object_info_data[i].sizep))
+				die("object-info: ref %s has invalid size %s",
+				    object_info_values.items[0].string,
+				    object_info_values.items[1 + size_index].string);
+		}
+
+		string_list_clear(&object_info_values, 0);
+	}
+	check_stateless_delimiter(stateless_rpc, reader, "stateless delimiter expected");
+
+	return 0;
+}
diff --git a/fetch-object-info.h b/fetch-object-info.h
new file mode 100644
index 0000000000..d35284bd6b
--- /dev/null
+++ b/fetch-object-info.h
@@ -0,0 +1,22 @@
+#ifndef FETCH_OBJECT_INFO_H
+#define FETCH_OBJECT_INFO_H
+
+#include "pkt-line.h"
+#include "protocol.h"
+#include "odb.h"
+
+struct object_info_args {
+	struct string_list *object_info_options;
+	const struct string_list *server_options;
+	struct oid_array *oids;
+};
+
+/*
+ * Sends git-cat-file object-info command into the request buf and read the
+ * results from packets.
+ */
+int fetch_object_info(enum protocol_version version, struct object_info_args *args,
+		      struct packet_reader *reader, struct object_info *object_info_data,
+		      int stateless_rpc, int fd_out);
+
+#endif /* FETCH_OBJECT_INFO_H */
diff --git a/fetch-pack.c b/fetch-pack.c
index 29c41132ee..e3ae837583 100644
--- a/fetch-pack.c
+++ b/fetch-pack.c
@@ -1376,38 +1376,6 @@ static int add_haves(struct fetch_negotiator *negotiator,
 	return haves_added;
 }
 
-static void write_fetch_command_and_capabilities(struct strbuf *req_buf,
-						 const struct string_list *server_options)
-{
-	const char *hash_name;
-
-	ensure_server_supports_v2("fetch");
-	packet_buf_write(req_buf, "command=fetch");
-	if (server_supports_v2("agent"))
-		packet_buf_write(req_buf, "agent=%s", git_user_agent_sanitized());
-	if (advertise_sid && server_supports_v2("session-id"))
-		packet_buf_write(req_buf, "session-id=%s", trace2_session_id());
-	if (server_options && server_options->nr) {
-		int i;
-		ensure_server_supports_v2("server-option");
-		for (i = 0; i < server_options->nr; i++)
-			packet_buf_write(req_buf, "server-option=%s",
-					 server_options->items[i].string);
-	}
-
-	if (server_feature_v2("object-format", &hash_name)) {
-		int hash_algo = hash_algo_by_name(hash_name);
-		if (hash_algo_by_ptr(the_hash_algo) != hash_algo)
-			die(_("mismatched algorithms: client %s; server %s"),
-			    the_hash_algo->name, hash_name);
-		packet_buf_write(req_buf, "object-format=%s", the_hash_algo->name);
-	} else if (hash_algo_by_ptr(the_hash_algo) != GIT_HASH_SHA1_LEGACY) {
-		die(_("the server does not support algorithm '%s'"),
-		    the_hash_algo->name);
-	}
-	packet_buf_delim(req_buf);
-}
-
 static int send_fetch_request(struct fetch_negotiator *negotiator, int fd_out,
 			      struct fetch_pack_args *args,
 			      const struct ref *wants, struct oidset *common,
@@ -1419,7 +1387,7 @@ static int send_fetch_request(struct fetch_negotiator *negotiator, int fd_out,
 	int done_sent = 0;
 	struct strbuf req_buf = STRBUF_INIT;
 
-	write_fetch_command_and_capabilities(&req_buf, args->server_options);
+	write_command_and_capabilities(&req_buf, "fetch", args->server_options);
 
 	if (args->use_thin_pack)
 		packet_buf_write(&req_buf, "thin-pack");
@@ -1768,18 +1736,18 @@ static struct ref *do_fetch_pack_v2(struct fetch_pack_args *args,
 		reader.me = "fetch-pack";
 	}
 
+	/* v2 supports these by default */
+	allow_unadvertised_object_request |= ALLOW_REACHABLE_SHA1;
+	use_sideband = 2;
+	if (args->depth > 0 || args->deepen_since || args->deepen_not)
+		args->deepen = 1;
+
 	while (state != FETCH_DONE) {
 		switch (state) {
 		case FETCH_CHECK_LOCAL:
 			sort_ref_list(&ref, ref_compare_name);
 			QSORT(sought, nr_sought, cmp_ref_by_name);
 
-			/* v2 supports these by default */
-			allow_unadvertised_object_request |= ALLOW_REACHABLE_SHA1;
-			use_sideband = 2;
-			if (args->depth > 0 || args->deepen_since || args->deepen_not)
-				args->deepen = 1;
-
 			/* Filter 'ref' by 'sought' and those that aren't local */
 			mark_complete_and_common_ref(negotiator, args, &ref);
 			filter_refs(args, &ref, sought, nr_sought);
@@ -2287,7 +2255,7 @@ void negotiate_using_fetch(const struct oid_array *negotiation_restrict_tips,
 					   the_repository, "%d",
 					   negotiation_round);
 		strbuf_reset(&req_buf);
-		write_fetch_command_and_capabilities(&req_buf, server_options);
+		write_command_and_capabilities(&req_buf, "fetch", server_options);
 
 		packet_buf_write(&req_buf, "wait-for-done");
 
diff --git a/fetch-pack.h b/fetch-pack.h
index 6d0dec7f41..0fba340a84 100644
--- a/fetch-pack.h
+++ b/fetch-pack.h
@@ -16,6 +16,7 @@ struct fetch_pack_args {
 	const struct string_list *deepen_not;
 	struct list_objects_filter_options filter_options;
 	const struct string_list *server_options;
+	struct object_info *object_info_data;
 
 	/*
 	 * If not NULL, during packfile negotiation, fetch-pack will send "have"
diff --git a/git-compat-util.h b/git-compat-util.h
index 8809776407..5ecce5bbd2 100644
--- a/git-compat-util.h
+++ b/git-compat-util.h
@@ -975,6 +975,26 @@ static inline int strtoul_ui(char const *s, int base, unsigned int *result)
 	return 0;
 }
 
+/*
+ * Convert a string to a size_t using the standard library's strtoumax, with
+ * additional error handling to ensure robustness.
+ */
+static inline int strtoumax_szt(char const *s, int base, size_t *result)
+{
+	uintmax_t uim;
+	char *p;
+
+	errno = 0;
+	/* negative values would be accepted by strtoul */
+	if (strchr(s, '-'))
+		return -1;
+	uim = strtoumax(s, &p, base);
+	if ((errno || *p || p == s) || uim > SIZE_MAX)
+		return -1;
+	*result = uim;
+	return 0;
+}
+
 static inline int strtol_i(char const *s, int base, int *result)
 {
 	long ul;
diff --git a/meson.build b/meson.build
index c796fe5a6e..72ce371323 100644
--- a/meson.build
+++ b/meson.build
@@ -363,6 +363,7 @@ libgit_sources = [
   'exec-cmd.c',
   'fetch-negotiator.c',
   'fetch-pack.c',
+  'fetch-object-info.c',
   'fmt-merge-msg.c',
   'fsck.c',
   'fsmonitor.c',
diff --git a/object-file.c b/object-file.c
index 6453b1d6fa..07f019a0f6 100644
--- a/object-file.c
+++ b/object-file.c
@@ -1694,3 +1694,13 @@ struct odb_transaction *odb_transaction_files_begin(struct odb_source *source)
 
 	return &transaction->base;
 }
+
+void free_object_info_contents(struct object_info *object_info)
+{
+	if (!object_info)
+		return;
+	free(object_info->typep);
+	free(object_info->sizep);
+	free(object_info->disk_sizep);
+	free(object_info->delta_base_oid);
+}
diff --git a/odb.h b/odb.h
index eada48b716..d8072527ad 100644
--- a/odb.h
+++ b/odb.h
@@ -617,4 +617,7 @@ void parse_alternates(const char *string,
 		      const char *relative_base,
 		      struct strvec *out);
 
+/* Free pointers inside of object_info, but not object_info itself */
+void free_object_info_contents(struct object_info *object_info);
+
 #endif /* ODB_H */
diff --git a/serve.c b/serve.c
index 49a6e39b1d..2b07d922b3 100644
--- a/serve.c
+++ b/serve.c
@@ -89,7 +89,7 @@ static void session_id_receive(struct repository *r UNUSED,
 	trace2_data_string("transfer", NULL, "client-sid", client_sid);
 }
 
-static int object_info_advertise(struct repository *r, struct strbuf *value UNUSED)
+static int object_info_advertise(struct repository *r, struct strbuf *value)
 {
 	if (advertise_object_info == -1 &&
 	    repo_config_get_bool(r, "transfer.advertiseobjectinfo",
@@ -97,6 +97,9 @@ static int object_info_advertise(struct repository *r, struct strbuf *value UNUS
 		/* disabled by default */
 		advertise_object_info = 0;
 	}
+	/* Currently only size is supported */
+	if (value && advertise_object_info)
+		strbuf_addstr(value, "size");
 	return advertise_object_info;
 }
 
diff --git a/t/lib-cat-file.sh b/t/lib-cat-file.sh
new file mode 100644
index 0000000000..44af232d74
--- /dev/null
+++ b/t/lib-cat-file.sh
@@ -0,0 +1,16 @@
+# Library of git-cat-file related test functions.
+
+# Print a string without a trailing newline.
+echo_without_newline () {
+	printf '%s' "$*"
+}
+
+# Print a string without newlines and replace them with a NULL character (\0).
+echo_without_newline_nul () {
+	echo_without_newline "$@" | tr '\n' '\0'
+}
+
+# Calculate the length of a string.
+strlen () {
+	echo_without_newline "$1" | wc -c | sed -e 's/^ *//'
+}
diff --git a/t/meson.build b/t/meson.build
index dc56c7ee0d..b4c1528f62 100644
--- a/t/meson.build
+++ b/t/meson.build
@@ -171,6 +171,7 @@ integration_tests = [
   't1014-read-tree-confusing.sh',
   't1015-read-index-unmerged.sh',
   't1016-compatObjectFormat.sh',
+  't1017-cat-file-remote-object-info.sh',
   't1020-subdirectory.sh',
   't1022-read-tree-partial-clone.sh',
   't1050-large.sh',
diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh
index 8e2c52652c..8360f3bbd9 100755
--- a/t/t1006-cat-file.sh
+++ b/t/t1006-cat-file.sh
@@ -4,6 +4,7 @@ test_description='git cat-file'
 
 . ./test-lib.sh
 . "$TEST_DIRECTORY/lib-loose.sh"
+. "$TEST_DIRECTORY"/lib-cat-file.sh
 
 test_cmdmode_usage () {
 	test_expect_code 129 "$@" 2>err &&
@@ -99,18 +100,6 @@ do
 	'
 done
 
-echo_without_newline () {
-    printf '%s' "$*"
-}
-
-echo_without_newline_nul () {
-	echo_without_newline "$@" | tr '\n' '\0'
-}
-
-strlen () {
-    echo_without_newline "$1" | wc -c | sed -e 's/^ *//'
-}
-
 run_tests () {
     type=$1
     object_name="$2"
diff --git a/t/t1017-cat-file-remote-object-info.sh b/t/t1017-cat-file-remote-object-info.sh
new file mode 100755
index 0000000000..6bc863c391
--- /dev/null
+++ b/t/t1017-cat-file-remote-object-info.sh
@@ -0,0 +1,699 @@
+#!/bin/sh
+
+test_description='git cat-file --batch-command with remote-object-info command'
+
+GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
+export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
+
+. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-cat-file.sh
+
+hello_content="Hello World"
+hello_size=$(strlen "$hello_content")
+hello_oid=$(echo_without_newline "$hello_content" | git hash-object --stdin)
+hello_short_oid=$(git rev-parse --short "$hello_oid")
+
+unstored_content="Hello Git"
+unstored_oid=$(echo_without_newline "$unstored_content" | git hash-object --stdin)
+
+# This is how we get 13:
+# 13 = <file mode> + <a_space> + <file name> + <a_null>, where
+# file mode is 100644, which is 6 characters;
+# file name is hello, which is 5 characters
+# a space is 1 character and a null is 1 character
+tree_size=$(($(test_oid rawsz) + 13))
+
+commit_message="Initial commit"
+
+# This is how we get 137:
+# 137 = <tree header> + <a_space> + <a newline> +
+# <Author line> + <a newline> +
+# <Committer line> + <a newline> +
+# <a newline> +
+# <commit message length>
+# An easier way to calculate is: 1. use `git cat-file commit <commit hash> | wc -c`,
+# to get 177, 2. then deduct 40 hex characters to get 137
+commit_size=$(($(test_oid hexsz) + 137))
+
+tag_header_without_oid="type blob
+tag hellotag
+tagger $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>"
+tag_header_without_timestamp="object $hello_oid
+$tag_header_without_oid"
+tag_description="This is a tag"
+tag_content="$tag_header_without_timestamp 0 +0000
+
+$tag_description"
+
+tag_oid=$(echo_without_newline "$tag_content" | git hash-object -t tag --stdin -w)
+tag_size=$(strlen "$tag_content")
+
+set_transport_variables () {
+	hello_oid=$(echo_without_newline "$hello_content" | git hash-object --stdin)
+	tree_oid=$(git -C "$1" write-tree)
+	commit_oid=$(echo_without_newline "$commit_message" | git -C "$1" commit-tree $tree_oid)
+	tag_oid=$(echo_without_newline "$tag_content" | git -C "$1" hash-object -t tag --stdin -w)
+	tag_size=$(strlen "$tag_content")
+}
+
+# This section tests --batch-command with remote-object-info command
+# Since "%(objecttype)" is currently not supported by the command remote-object-info ,
+# the filters are set to "%(objectname) %(objectsize)" in some test cases.
+
+# Test --batch-command remote-object-info with 'git://' transport with
+# transfer.advertiseobjectinfo set to true, i.e. server has object-info capability
+. "$TEST_DIRECTORY"/lib-git-daemon.sh
+start_git_daemon --export-all --enable=receive-pack
+daemon_parent=$GIT_DAEMON_DOCUMENT_ROOT_PATH/parent
+
+test_expect_success 'create repo to be served by git-daemon' '
+	git init "$daemon_parent" &&
+	echo_without_newline "$hello_content" > $daemon_parent/hello &&
+	git -C "$daemon_parent" update-index --add hello &&
+	git -C "$daemon_parent" config transfer.advertiseobjectinfo true &&
+	git clone "$GIT_DAEMON_URL/parent" -n "$daemon_parent/daemon_client_empty"
+'
+
+test_expect_success 'batch-command remote-object-info git://' '
+	(
+		set_transport_variables "$daemon_parent" &&
+		cd "$daemon_parent/daemon_client_empty" &&
+
+		# These results prove remote-object-info can get object info from the remote
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+
+		# These results prove remote-object-info did not download objects from the remote
+		echo "$hello_oid missing" >>expect &&
+		echo "$tree_oid missing" >>expect &&
+		echo "$commit_oid missing" >>expect &&
+		echo "$tag_oid missing" >>expect &&
+
+		git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+		remote-object-info "$GIT_DAEMON_URL/parent" $hello_oid
+		remote-object-info "$GIT_DAEMON_URL/parent" $tree_oid
+		remote-object-info "$GIT_DAEMON_URL/parent" $commit_oid
+		remote-object-info "$GIT_DAEMON_URL/parent" $tag_oid
+		info $hello_oid
+		info $tree_oid
+		info $commit_oid
+		info $tag_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command remote-object-info git:// multiple sha1 per line' '
+	(
+		set_transport_variables "$daemon_parent" &&
+		cd "$daemon_parent/daemon_client_empty" &&
+
+		# These results prove remote-object-info can get object info from the remote
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+
+		# These results prove remote-object-info did not download objects from the remote
+		echo "$hello_oid missing" >>expect &&
+		echo "$tree_oid missing" >>expect &&
+		echo "$commit_oid missing" >>expect &&
+		echo "$tag_oid missing" >>expect &&
+
+		git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+		remote-object-info "$GIT_DAEMON_URL/parent" $hello_oid $tree_oid $commit_oid $tag_oid
+		info $hello_oid
+		info $tree_oid
+		info $commit_oid
+		info $tag_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command remote-object-info git:// default filter' '
+	(
+		set_transport_variables "$daemon_parent" &&
+		cd "$daemon_parent/daemon_client_empty" &&
+
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+		GIT_TRACE_PACKET=1 git cat-file --batch-command >actual <<-EOF &&
+		remote-object-info "$GIT_DAEMON_URL/parent" $hello_oid $tree_oid
+		remote-object-info "$GIT_DAEMON_URL/parent" $commit_oid $tag_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command --buffer remote-object-info git://' '
+	(
+		set_transport_variables "$daemon_parent" &&
+		cd "$daemon_parent/daemon_client_empty" &&
+
+		# These results prove remote-object-info can get object info from the remote
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+
+		# These results prove remote-object-info did not download objects from the remote
+		echo "$hello_oid missing" >>expect &&
+		echo "$tree_oid missing" >>expect &&
+		echo "$commit_oid missing" >>expect &&
+		echo "$tag_oid missing" >>expect &&
+
+		git cat-file --batch-command="%(objectname) %(objectsize)" --buffer >actual <<-EOF &&
+		remote-object-info "$GIT_DAEMON_URL/parent" $hello_oid $tree_oid
+		remote-object-info "$GIT_DAEMON_URL/parent" $commit_oid $tag_oid
+		info $hello_oid
+		info $tree_oid
+		info $commit_oid
+		info $tag_oid
+		flush
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command -Z remote-object-info git:// default filter' '
+	(
+		set_transport_variables "$daemon_parent" &&
+		cd "$daemon_parent/daemon_client_empty" &&
+
+		printf "%s\0" "$hello_oid $hello_size" >expect &&
+		printf "%s\0" "$tree_oid $tree_size" >>expect &&
+		printf "%s\0" "$commit_oid $commit_size" >>expect &&
+		printf "%s\0" "$tag_oid $tag_size" >>expect &&
+
+		printf "%s\0" "$hello_oid missing" >>expect &&
+		printf "%s\0" "$tree_oid missing" >>expect &&
+		printf "%s\0" "$commit_oid missing" >>expect &&
+		printf "%s\0" "$tag_oid missing" >>expect &&
+
+		batch_input="remote-object-info $GIT_DAEMON_URL/parent $hello_oid $tree_oid
+remote-object-info $GIT_DAEMON_URL/parent $commit_oid $tag_oid
+info $hello_oid
+info $tree_oid
+info $commit_oid
+info $tag_oid
+" &&
+		echo_without_newline_nul "$batch_input" >commands_null_delimited &&
+
+		git cat-file --batch-command -Z < commands_null_delimited >actual &&
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'remote-object-info does not support short oids' '
+	(
+		set_transport_variables "$daemon_parent" &&
+		cd "$daemon_parent/daemon_client_empty" &&
+
+		test_must_fail git cat-file --batch-command 2>err <<-EOF &&
+		remote-object-info $GIT_DAEMON_URL/parent $hello_short_oid
+		EOF
+		test_grep "does not support short oids" err
+	)
+'
+
+test_expect_success 'remote-object-info does not die on missing oid like info' '
+	(
+		set_transport_variables "$daemon_parent" &&
+		cd "$daemon_parent/daemon_client_empty" &&
+
+		git cat-file --batch-command >local <<-EOF &&
+		info $unstored_oid
+		EOF
+		git cat-file --batch-command >remote <<-EOF &&
+		remote-object-info $GIT_DAEMON_URL/parent $unstored_oid
+		EOF
+		test_cmp local remote
+	)
+'
+
+# This tests depends on %(objecttype) not being supported yet, once supported
+# it needs to be updated.
+test_expect_success 'unsupported placeholder on remote returns empty string' '
+	(
+		set_transport_variables "$daemon_parent" &&
+		cd "$daemon_parent/daemon_client_empty" &&
+
+		echo "" >expect &&
+		git cat-file --batch-command="%(objecttype)" >actual <<-EOF &&
+		remote-object-info "$GIT_DAEMON_URL/parent" $hello_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+# Test --batch-command remote-object-info with 'git://' and
+# transfer.advertiseobjectinfo set to false, i.e. server does not have object-info capability
+test_expect_success 'batch-command remote-object-info git:// fails when transfer.advertiseobjectinfo=false' '
+	(
+		git -C "$daemon_parent" config transfer.advertiseobjectinfo false &&
+		set_transport_variables "$daemon_parent" &&
+
+		test_must_fail git cat-file --batch-command="%(objectname) %(objectsize)" 2>err <<-EOF &&
+		remote-object-info $GIT_DAEMON_URL/parent $hello_oid $tree_oid $commit_oid $tag_oid
+		EOF
+		test_grep "object-info capability is not enabled on the server" err &&
+
+		# revert server state back
+		git -C "$daemon_parent" config transfer.advertiseobjectinfo true
+
+	)
+'
+
+stop_git_daemon
+
+# Test --batch-command remote-object-info with 'file://' transport with
+# transfer.advertiseobjectinfo set to true, i.e. server has object-info capability
+# shellcheck disable=SC2016
+test_expect_success 'create repo to be served by file:// transport' '
+	git init server &&
+	git -C server config protocol.version 2 &&
+	git -C server config transfer.advertiseobjectinfo true &&
+	echo_without_newline "$hello_content" > server/hello &&
+	git -C server update-index --add hello &&
+	git clone -n "file://$(pwd)/server" file_client_empty
+'
+
+test_expect_success 'batch-command remote-object-info file://' '
+	(
+		set_transport_variables "server" &&
+		server_path="$(pwd)/server" &&
+		cd file_client_empty &&
+
+		# These results prove remote-object-info can get object info from the remote
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+
+		# These results prove remote-object-info did not download objects from the remote
+		echo "$hello_oid missing" >>expect &&
+		echo "$tree_oid missing" >>expect &&
+		echo "$commit_oid missing" >>expect &&
+		echo "$tag_oid missing" >>expect &&
+
+		git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+		remote-object-info "file://${server_path}" $hello_oid
+		remote-object-info "file://${server_path}" $tree_oid
+		remote-object-info "file://${server_path}" $commit_oid
+		remote-object-info "file://${server_path}" $tag_oid
+		info $hello_oid
+		info $tree_oid
+		info $commit_oid
+		info $tag_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command remote-object-info file:// multiple sha1 per line' '
+	(
+		set_transport_variables "server" &&
+		server_path="$(pwd)/server" &&
+		cd file_client_empty &&
+
+		# These results prove remote-object-info can get object info from the remote
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+
+		# These results prove remote-object-info did not download objects from the remote
+		echo "$hello_oid missing" >>expect &&
+		echo "$tree_oid missing" >>expect &&
+		echo "$commit_oid missing" >>expect &&
+		echo "$tag_oid missing" >>expect &&
+
+
+		git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+		remote-object-info "file://${server_path}" $hello_oid $tree_oid $commit_oid $tag_oid
+		info $hello_oid
+		info $tree_oid
+		info $commit_oid
+		info $tag_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command --buffer remote-object-info file://' '
+	(
+		set_transport_variables "server" &&
+		server_path="$(pwd)/server" &&
+		cd file_client_empty &&
+
+		# These results prove remote-object-info can get object info from the remote
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+
+		# These results prove remote-object-info did not download objects from the remote
+		echo "$hello_oid missing" >>expect &&
+		echo "$tree_oid missing" >>expect &&
+		echo "$commit_oid missing" >>expect &&
+		echo "$tag_oid missing" >>expect &&
+
+		git cat-file --batch-command="%(objectname) %(objectsize)" --buffer >actual <<-EOF &&
+		remote-object-info "file://${server_path}" $hello_oid $tree_oid
+		remote-object-info "file://${server_path}" $commit_oid $tag_oid
+		info $hello_oid
+		info $tree_oid
+		info $commit_oid
+		info $tag_oid
+		flush
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command remote-object-info file:// default filter' '
+	(
+		set_transport_variables "server" &&
+		server_path="$(pwd)/server" &&
+		cd file_client_empty &&
+
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+
+		git cat-file --batch-command >actual <<-EOF &&
+		remote-object-info "file://${server_path}" $hello_oid $tree_oid
+		remote-object-info "file://${server_path}" $commit_oid $tag_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command -Z remote-object-info file:// default filter' '
+	(
+		set_transport_variables "server" &&
+		server_path="$(pwd)/server" &&
+		cd file_client_empty &&
+
+		printf "%s\0" "$hello_oid $hello_size" >expect &&
+		printf "%s\0" "$tree_oid $tree_size" >>expect &&
+		printf "%s\0" "$commit_oid $commit_size" >>expect &&
+		printf "%s\0" "$tag_oid $tag_size" >>expect &&
+
+		printf "%s\0" "$hello_oid missing" >>expect &&
+		printf "%s\0" "$tree_oid missing" >>expect &&
+		printf "%s\0" "$commit_oid missing" >>expect &&
+		printf "%s\0" "$tag_oid missing" >>expect &&
+
+		batch_input="remote-object-info \"file://${server_path}\" $hello_oid $tree_oid
+remote-object-info \"file://${server_path}\" $commit_oid $tag_oid
+info $hello_oid
+info $tree_oid
+info $commit_oid
+info $tag_oid
+" &&
+		echo_without_newline_nul "$batch_input" >commands_null_delimited &&
+
+		git cat-file --batch-command -Z < commands_null_delimited >actual &&
+		test_cmp expect actual
+	)
+'
+
+# Test --batch-command remote-object-info with 'file://' and
+# transfer.advertiseobjectinfo set to false, i.e. server does not have object-info capability
+test_expect_success 'batch-command remote-object-info file:// fails when transfer.advertiseobjectinfo=false' '
+	(
+		set_transport_variables "server" &&
+		server_path="$(pwd)/server" &&
+		git -C "${server_path}" config transfer.advertiseobjectinfo false &&
+
+		test_must_fail git cat-file --batch-command="%(objectname) %(objectsize)" 2>err <<-EOF &&
+		remote-object-info "file://${server_path}" $hello_oid $tree_oid $commit_oid $tag_oid
+		EOF
+		test_grep "object-info capability is not enabled on the server" err &&
+
+		# revert server state back
+		git -C "${server_path}" config transfer.advertiseobjectinfo true
+	)
+'
+
+# Test --batch-command remote-object-info with 'http://' transport with
+# transfer.advertiseobjectinfo set to true, i.e. server has object-info capability
+
+. "$TEST_DIRECTORY"/lib-httpd.sh
+start_httpd
+
+test_expect_success 'create repo to be served by http:// transport' '
+	git init "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+	git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config http.receivepack true &&
+	git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config transfer.advertiseobjectinfo true &&
+	echo_without_newline "$hello_content" > $HTTPD_DOCUMENT_ROOT_PATH/http_parent/hello &&
+	git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" update-index --add hello &&
+	git clone "$HTTPD_URL/smart/http_parent" -n "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty"
+'
+
+test_expect_success 'batch-command remote-object-info http://' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty" &&
+
+		# These results prove remote-object-info can get object info from the remote
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+
+		# These results prove remote-object-info did not download objects from the remote
+		echo "$hello_oid missing" >>expect &&
+		echo "$tree_oid missing" >>expect &&
+		echo "$commit_oid missing" >>expect &&
+		echo "$tag_oid missing" >>expect &&
+
+		git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent" $hello_oid
+		remote-object-info "$HTTPD_URL/smart/http_parent" $tree_oid
+		remote-object-info "$HTTPD_URL/smart/http_parent" $commit_oid
+		remote-object-info "$HTTPD_URL/smart/http_parent" $tag_oid
+		info $hello_oid
+		info $tree_oid
+		info $commit_oid
+		info $tag_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command remote-object-info http:// one line' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty" &&
+
+		# These results prove remote-object-info can get object info from the remote
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+
+		# These results prove remote-object-info did not download objects from the remote
+		echo "$hello_oid missing" >>expect &&
+		echo "$tree_oid missing" >>expect &&
+		echo "$commit_oid missing" >>expect &&
+		echo "$tag_oid missing" >>expect &&
+
+		git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent" $hello_oid $tree_oid $commit_oid $tag_oid
+		info $hello_oid
+		info $tree_oid
+		info $commit_oid
+		info $tag_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command --buffer remote-object-info http://' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty" &&
+
+		# These results prove remote-object-info can get object info from the remote
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+
+		# These results prove remote-object-info did not download objects from the remote
+		echo "$hello_oid missing" >>expect &&
+		echo "$tree_oid missing" >>expect &&
+		echo "$commit_oid missing" >>expect &&
+		echo "$tag_oid missing" >>expect &&
+
+		git cat-file --batch-command="%(objectname) %(objectsize)" --buffer >actual <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent" $hello_oid $tree_oid
+		remote-object-info "$HTTPD_URL/smart/http_parent" $commit_oid $tag_oid
+		info $hello_oid
+		info $tree_oid
+		info $commit_oid
+		info $tag_oid
+		flush
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command remote-object-info http:// default filter' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty" &&
+
+		echo "$hello_oid $hello_size" >expect &&
+		echo "$tree_oid $tree_size" >>expect &&
+		echo "$commit_oid $commit_size" >>expect &&
+		echo "$tag_oid $tag_size" >>expect &&
+
+		git cat-file --batch-command >actual <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent" $hello_oid $tree_oid
+		remote-object-info "$HTTPD_URL/smart/http_parent" $commit_oid $tag_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'batch-command -Z remote-object-info http:// default filter' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty" &&
+
+		printf "%s\0" "$hello_oid $hello_size" >expect &&
+		printf "%s\0" "$tree_oid $tree_size" >>expect &&
+		printf "%s\0" "$commit_oid $commit_size" >>expect &&
+		printf "%s\0" "$tag_oid $tag_size" >>expect &&
+
+		batch_input="remote-object-info $HTTPD_URL/smart/http_parent $hello_oid $tree_oid
+remote-object-info $HTTPD_URL/smart/http_parent $commit_oid $tag_oid
+" &&
+		echo_without_newline_nul "$batch_input" >commands_null_delimited &&
+
+		git cat-file --batch-command -Z < commands_null_delimited >actual &&
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'remote-object-info fails on unsupported filter option (objectsize:disk)' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+
+		echo "$hello_oid " >expect &&
+
+		git cat-file --batch-command="%(objectname) %(objectsize:disk)" >actual <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent" $hello_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'remote-object-info fails on unsupported filter option (deltabase)' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+
+		echo "" >expect &&
+
+		git cat-file --batch-command="%(deltabase)" >actual <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent" $hello_oid
+		EOF
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'remote-object-info fails on server with legacy protocol' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+
+		test_must_fail git -c protocol.version=0 cat-file --batch-command="%(objectname) %(objectsize)" 2>err <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent" $hello_oid
+		EOF
+		test_grep "object-info requires protocol v2" err
+	)
+'
+
+test_expect_success 'remote-object-info fails on server with legacy protocol with default filter' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+
+		test_must_fail git -c protocol.version=0 cat-file --batch-command 2>err <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent" $hello_oid
+		EOF
+		test_grep "object-info requires protocol v2" err
+	)
+'
+
+test_expect_success 'remote-object-info fails on malformed OID' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		malformed_object_id="this_id_is_not_valid" &&
+
+		test_must_fail git cat-file --batch-command="%(objectname) %(objectsize)" 2>err <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent" $malformed_object_id
+		EOF
+		test_grep "not a valid object name '$malformed_object_id'" err
+	)
+'
+
+test_expect_success 'remote-object-info fails on malformed OID with default filter' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		malformed_object_id="this_id_is_not_valid" &&
+
+		test_must_fail git cat-file --batch-command 2>err <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent" $malformed_object_id
+		EOF
+		test_grep "not a valid object name '$malformed_object_id'" err
+	)
+'
+
+test_expect_success 'remote-object-info fails on not providing OID' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+
+		test_must_fail git cat-file --batch-command="%(objectname) %(objectsize)" 2>err <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent"
+		EOF
+		test_grep "remote-object-info requires objects" err
+	)
+'
+
+
+# Test --batch-command remote-object-info with 'http://' transport and
+# transfer.advertiseobjectinfo set to false, i.e. server does not have object-info capability
+test_expect_success 'batch-command remote-object-info http:// fails when transfer.advertiseobjectinfo=false ' '
+	(
+		set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+		git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config transfer.advertiseobjectinfo false &&
+
+		test_must_fail git cat-file --batch-command="%(objectname) %(objectsize)" 2>err <<-EOF &&
+		remote-object-info "$HTTPD_URL/smart/http_parent" $hello_oid $tree_oid $commit_oid $tag_oid
+		EOF
+		test_grep "object-info capability is not enabled on the server" err &&
+
+		# revert server state back
+		git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config transfer.advertiseobjectinfo true
+	)
+'
+
+# DO NOT add non-httpd-specific tests here, because the last part of this
+# test script is only executed when httpd is available and enabled.
+
+test_done
diff --git a/transport-helper.c b/transport-helper.c
index 80f90eb7ba..f97e6d7b29 100644
--- a/transport-helper.c
+++ b/transport-helper.c
@@ -266,9 +266,9 @@ static int disconnect_helper(struct transport *transport)
 		close(data->helper->out);
 		fclose(data->out);
 		res = finish_command(data->helper);
-		FREE_AND_NULL(data->name);
 		FREE_AND_NULL(data->helper);
 	}
+	FREE_AND_NULL(data->name);
 	return res;
 }
 
@@ -727,8 +727,7 @@ static int fetch_refs(struct transport *transport,
 
 	/*
 	 * If we reach here, then the server, the client, and/or the transport
-	 * helper does not support protocol v2. --negotiate-only requires
-	 * protocol v2.
+	 * helper does not support protocol v2. --negotiate-only.
 	 */
 	if (data->transport_options.acked_commits) {
 		warning(_("--negotiate-only requires protocol v2"));
@@ -784,6 +783,15 @@ static int fetch_refs(struct transport *transport,
 	return -1;
 }
 
+static int fetch_object_info_helper(struct transport *transport)
+{
+	get_helper(transport);
+	if (process_connect(transport, 0))
+		return transport->vtable->fetch_object_info(transport);
+
+	die(_("object-info requires protocol v2"));
+}
+
 struct push_update_ref_state {
 	struct ref *hint;
 	struct ref_push_report *report;
@@ -1330,6 +1338,7 @@ static struct transport_vtable vtable = {
 	.get_refs_list	= get_refs_list,
 	.get_bundle_uri = get_bundle_uri,
 	.fetch_refs	= fetch_refs,
+	.fetch_object_info = fetch_object_info_helper,
 	.push_refs	= push_refs,
 	.connect	= connect_helper,
 	.disconnect	= release_helper
diff --git a/transport-internal.h b/transport-internal.h
index 051f3ab0dc..60db0bedcd 100644
--- a/transport-internal.h
+++ b/transport-internal.h
@@ -45,6 +45,14 @@ struct transport_vtable {
 	 **/
 	int (*fetch_refs)(struct transport *transport, int refs_nr, struct ref **refs);
 
+	/*
+	 * Fetch object info (only size currently) from remote without
+	 * downloading the objects.
+	 *
+	 * Uses object-info capability of v2 protocol.
+	 */
+	int (*fetch_object_info)(struct transport *transport);
+
 	/**
 	 * Push the objects and refs. Send the necessary objects, and
 	 * then, for any refs where peer_ref is set and
diff --git a/transport.c b/transport.c
index fc144f0aed..3e0a6558b7 100644
--- a/transport.c
+++ b/transport.c
@@ -1,3 +1,4 @@
+#include "compat/posix.h"
 #define USE_THE_REPOSITORY_VARIABLE
 
 #include "git-compat-util.h"
@@ -9,6 +10,7 @@
 #include "hook.h"
 #include "pkt-line.h"
 #include "fetch-pack.h"
+#include "fetch-object-info.h"
 #include "remote.h"
 #include "connect.h"
 #include "send-pack.h"
@@ -432,6 +434,48 @@ static int get_bundle_uri(struct transport *transport)
 				     transport->bundles, stateless_rpc);
 }
 
+static int fetch_object_info_via_pack(struct transport *transport)
+{
+	int ret = 0;
+	struct git_transport_data *data = transport->data;
+	struct packet_reader reader;
+	struct object_info_args args = { 0 };
+
+	args.server_options = transport->server_options;
+	args.oids = transport->smart_options->object_info_oids;
+	args.object_info_options = transport->smart_options->object_info_options;
+	string_list_sort(args.object_info_options);
+
+	connect_setup(transport, 0);
+	packet_reader_init(&reader, data->fd[0], NULL, 0,
+			   PACKET_READ_CHOMP_NEWLINE |
+			   PACKET_READ_GENTLE_ON_EOF |
+			   PACKET_READ_DIE_ON_ERR_PACKET);
+
+	data->version = discover_version(&reader);
+	transport->hash_algo = reader.hash_algo;
+
+	ret = fetch_object_info(data->version, &args, &reader,
+				data->options.object_info_data,
+				transport->stateless_rpc, data->fd[1]);
+
+	close(data->fd[0]);
+	if (data->fd[1] >= 0)
+		close(data->fd[1]);
+	if (finish_connect(data->conn))
+		ret = -1;
+	data->conn = NULL;
+
+	return ret;
+}
+
+int transport_fetch_object_info(struct transport *transport)
+{
+	if (!transport->vtable->fetch_object_info)
+		die(_("remote does not support object-info"));
+	return transport->vtable->fetch_object_info(transport);
+}
+
 static int fetch_refs_via_pack(struct transport *transport,
 			       int nr_heads, struct ref **to_fetch)
 {
@@ -1004,6 +1048,7 @@ static struct transport_vtable taken_over_vtable = {
 	.get_refs_list	= get_refs_via_connect,
 	.get_bundle_uri = get_bundle_uri,
 	.fetch_refs	= fetch_refs_via_pack,
+	.fetch_object_info = fetch_object_info_via_pack,
 	.push_refs	= git_transport_push,
 	.disconnect	= disconnect_git
 };
@@ -1169,6 +1214,7 @@ static struct transport_vtable builtin_smart_vtable = {
 	.get_refs_list	= get_refs_via_connect,
 	.get_bundle_uri = get_bundle_uri,
 	.fetch_refs	= fetch_refs_via_pack,
+	.fetch_object_info = fetch_object_info_via_pack,
 	.push_refs	= git_transport_push,
 	.connect	= connect_git,
 	.disconnect	= disconnect_git
diff --git a/transport.h b/transport.h
index 7e5867cffa..9e85a4cd35 100644
--- a/transport.h
+++ b/transport.h
@@ -6,6 +6,7 @@
 #include "list-objects-filter-options.h"
 #include "string-list.h"
 #include "connect.h"
+#include "odb.h"
 
 struct git_transport_options {
 	unsigned thin : 1;
@@ -55,6 +56,10 @@ struct git_transport_options {
 	 * common commits to this oidset instead of fetching any packfiles.
 	 */
 	struct oidset *acked_commits;
+
+	struct oid_array *object_info_oids;
+	struct object_info *object_info_data;
+	struct string_list *object_info_options;
 };
 
 enum transport_family {
@@ -309,6 +314,11 @@ int transport_get_remote_bundle_uri(struct transport *transport);
 const struct git_hash_algo *transport_get_hash_algo(struct transport *transport);
 int transport_fetch_refs(struct transport *transport, struct ref *refs);
 
+/*
+ * Fetch the object info from remote
+ */
+int transport_fetch_object_info(struct transport *transport);
+
 /*
  * If this flag is set, unlocking will avoid to call non-async-signal-safe
  * functions. This will necessarily leave behind some data structures which